Saving Infoset to tranport Request

Hi all,
I have added a table in the infoset and generated the same but there is no transport request pop up appeared before the generation or on saving it.
My problem is that i want to save the changes made in the infoset into transport request and i am not able to do the same.
Gurus guide me to the procedure of saving the infoset to the transport request.
Thanks in advance.
Anuj.
Edited by: Anuj Anuj112 on Jun 24, 2009 6:22 PM

Hi ,
Please find below the steps for transporting your infoset.
1) Select the infoset to be transported in SQ02 and click Environment->Transports.
2) Selct the Export option
3) Remove the test run check box and select overwriting allowed
4)Select the transport infoset and queries option .
   Import option would be replace
   Here yuo have to specify your infoset name in both lower and upper limit .
   the same applies for queries .
Execute it , this would create the transport request .copy this tranport request release it and go to transport management in SQ02 in the client where the changes need to be imported .
Here select the import option and overwriting allowed and select Transport infoset and queries as mentioned above
in Dataset with import mention the transport request that was created earlier.
Regards,
Raghavendra

Similar Messages

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • Client ,tranport ,request id,release

    client ,tranport ,request id,release in detail?

    Hi chandra,
                   Client ,tranport ,request id,release in detail?
    Assuming you want to know about Transport connection in detail..
    Transport connection -
    > Grouping(Neccessary objects)(It works fine for me!!)---->Object Types>Eg(Cube)--
    >Assign to a Transport Request(Truck icon).
    *The following Transport sequence * :(Only Neccessary objects)
    a)Info object catalog
    b)Application component
    c)Infocubes & ODS
    d)Transfer rules/Update rules
    e)Infopackages
    f).Multiproviders
    g).Queries/Workbooks
    h)Process chains
    Procedure:
    1. SE09 - To release the Tasks(first) followed by the Request.
    2.Ask your Basis to Import them request to the QA or Prod server.Or if you got authorization for STMS,you can import them request.(make sure u adjust import queue before attempting to import).
    3.Check in the respective Target(QA/PROD) on whether the BW Objects are transported fine.
    I guess this is what u asked for!!!!!!!!!
    cheers
    Arun

  • Download abap object under a tranport request.

    hi experts
                  i have a requirement, a tranport request contain any ABAP Object i don't know how many object actually it contains may be one or more just suppose it will have a report program under a  transport request , in the select-option i will enter transport request number and the path of the directery( whr i have to store the report program). now this report wiil download the report program on this path which i have given in section screen.
    could you please help me where the transport requests are stored in SAP is thr any table pls give me table name or is thr any function module to do this job.
    thanks & regards
    pardeep kumar

    Take a look at the following tables :
    E071
    E071C
    E071E
    E071K
    E071KF
    E071KFINI
    E071S
    They contain the data you are looking for.
    Hope that helps,
    Michael

  • Transport Request - saving objects in workbench request

    Output of my Report is ALV. In that I have One button in the application toolbar and I have checkbox as a column to select  the displayed entries. If I select that button the selected entry( in my case 'Role') has to be saved under a customizing request'.
        In my case it is saving the object under 'WORKBENCH Request'.
    Is there any Function module to do this .
        I have used 'TR_REQUEST_CHOICE' fn module to get that create request pop up screen and for appending entries I have used 'TRINT_APPEND_TO_COMM_ARRAYS'.(IT is saving the object under WORKBENCH ReQUEST, But I need it in CUSTOMIZING REQUEST)

    Hello Nievetha
    The mass transport function in the profilgenerator (PFCD) is executed using report <b>PFCG_MASS_TRANSPORT.</b>
    For a single role you could directly use function module
      CALL FUNCTION 'PRGN_TREE_HANDLE_UCOMM_NAVIGAT'
        EXPORTING
          okcode             =' TRAN'                  " transport role
          agr_name_neu       = <name of role>.
    Since you would like to put multiple roles into a single transport request you can do the following:
    SUBMIT pfcg_mass_transport
            with agr_name ...  = <list of roles as range>
            with comp_rol ...   = <with or without composite roles>
            with profiles ...      = <with or without profiles>
    AND RETURN.
    Regards
      Uwe

  • Saving Infoset DELETION to tranport Request

    Anyone know how this is done in SQ02? If you click delete it's gone immediately. I'm guessing I need to go into environment->transports first and get in into a transport request?
    I'm not sure what options to choose though, as there's various radio buttons and executing doesn't prompt for a transport request.
    Thanks

    Transport can be done as follows
    By using the standard program u2018RSAQR3TRu2019
    By using the transport option available on the application bar in Transactions SQ02 or SQ03.
    Hope it helps you.

  • How to find out if an object is already saved in a transport request

    Hi all,
    Does anyone know a function module or a class using which I can find out if a development object(class. interface etc.)  is already processed and saved in an open transport request in my system?
    Thanks in advance
    Sükrü

    Hi Sükrü
    You can read the table E071 with the object id and get the transport request number. Use this transport request and read the table E070, the field "TRSTATUS" will give the status whether the object is locked or released.
    Hope this helps !
    Regards
    Ranganath
    PS : Reward points if found useful !

  • Help with saved pdf' s,"more request cannot be completed.Service book information not found"

    Hey from south africa,I'm using the curve 8520 on MTN service provider.I came across a problem a while ago where I had to setup my email address again,I had an email with some pdf's saved.They were working well until the re-setup,now when I try to load ones that I haven't read it gives me the error "More request cannot be completed.Service book information not found".I've sent the email back to myself but no luck,help.Thanks in advance.

    You need to reset your email account again on your device & send the service books from the same interface on your device. Wait for the 30mins & register now yourself from the handset itself by following the below steps-click on Option Application-click on Advanced - Click on Host Routing table - Click menu key - select Register now option & Click, Follow these steps twice. Now go into your email application & click on it. Then press the menu key & scroll down,you can see Reconcile now option, Click on it twice !
    Now try to open that PDF again !

  • Server state saving restores view even request params changed for same page

    hi all,
    i've a problem with the state saving method of JSF... environment: JSF1.1, WAS6, Spring2.0..
    i have two buttons those POP UP an IFRAME inside with a details page..
    <input type="button" onclick="openDetailsPage('detailsPage.jsp?id=1');" value="show first record's details" />
    <input type="button" onclick="openDetailsPage('detailsPage.jsp?id=2);" value="show second record's details" />
    detailspage gets the "id" param and query&show the details of the requested data IF THE REQUEST IS NOT POSTBACK... like below;
    public void onPreRender() {
    if (!isPostBack()) {
    // get id from param, query the record and show its details...
    problem is; if i set the state_saving_method as "server"; jsf is creating view only for the first time... after that, no matter what record info i sent, it's restoring the old page...
    however, there's no problem if i set state_saving_method=client... my details page view is being created in every request...
    what may be the problem? when the server state saving method used, it's not creating just restoring the previously opened page in every click...
    thanks in advance,
    hasan...

    I just did, thank you. Here are the reports i filed:
    [Server side viewstate saving: UIViewRoot's viewMap gets cleared on postback|http://java.net/jira/browse/JAVASERVERFACES-1982]
    [Configuration attribute com.sun.faces.serializeServerState only work for the first postback|http://java.net/jira/browse/JAVASERVERFACES-1983]

  • Urgent how to add the transactions created in se63 to tranport request???

    I have maintained the translations for my smartform in se63 i want to attach the translation to a transport request.Can you help me out in this...
    it is very urgent.

    Hi
    When you save this , it should prompt you for a request
    In this way you can save it to a request and then trasnport it.
    If it is not prompting for a request , make sure you are assigning it properly and not to any local $TMP class or package.
    and also check for your user and then make sure your corrections are saved.
    I guess this might help.
    Regards,
    Chithra.

  • How to view saved infosets

    hi,
    i hav created a query in SQ01 and its executing all my requriments
    but saved in infosetxxxxxxxxxxxxxxxx17
    how to execute the infoset which is saved
    regards,
    balaji.t

    Hi:
    To view infosets, go to SQ02 - InfoSets.Normally you do not
    execute the infoset which is saved, but you create a query after infoset is completed.
    Complete the SQ01 - Queries and execute the report.
    Please let me knwo if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Best Practice for Tranport request Naming

    Hi,
    We are using SolMan 4.0 during implementation of ECC 6.0.
    We have placed the blueprint and we are in configuration phase.
    We have a IMG project created in the DEV system and was assinged in Solution Manager project under  System Landscape->IMG Projects.
    Now that consultants are going to dev system and customizing they are creating their transport requests.
    Is there any best practice for the naming convention or the transport requests..
    By creating one IMG project for entire implementation is that going to create any problem..!!
    Please sgugest.
    Thanks & Regards
    Mrutyunjay

    As per MSFT best practices(Mentioned by Scott) keep it short as much as possible. You can use SP for SharePoint-SUBSite
    also check this blog for best practices.
    http://www.networkworld.com/community/blog/simple-naming-conventions-improve-end-user-experience-sharepoint-sites
    also one more thing you should consider, never use the reserved words into the SharePoint URLs. you will able to create the site/lis/library/folder but when you browse get the 404 errors.
    check this blog:
    http://www.sharepointblog.cz/2012/04/reserved-words-in-sharepoint-url.html
    http://techtrainingnotes.blogspot.com/2012/03/names-you-cant-use-for-sharepoint.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Tranport request missing

    Hi all,
    our dev server crash. after database restore the problem is solved but it is status on when backup is taken
    during backup and crash we upgrade some program with transport request. those request are missing after backup restore
    those request are already released and imported in qas and prd. if we create new request in dev server it is created with old request no.
    how to solve this problem.

    So the transport no. that is being generated in your dev system is older or before the system crashed and you want to change the transport no. to some new transport no. so it does not conflict with the transports that are already imported into QAS and PRD , correct ?
    If I have understood your issue correctly then what you need to do is update table E070L with the new transport number on your dev system.
    Hope this helps.
    Thanks,
    Naveed

  • Problems with tranportation requests in solution buider

    Hi,
    I'm implementing crm2007, and it was everthing going fine, untill now. In solution builder when I went to activate a new building block I had an error message "Transport numbers not fullfill the requirement.".
    I have no ideia of what this could be!!!! I try to create new transport requests, but I had the same error!
    Can anyone give me some guideline to find the problem?
    Thanks

    HI Ragu,
    I created user by settting "En" as default language.But still it is giving same error.
    regards
    srujan
    Message was edited by: srujansingh ramsingh

  • FM for checking Tranport Request.

    Hi gurus,
    Transport Request numbers are stored in Table E070,
    it also stores if Request is Customizing request/Correction Request.
    I want to know if there is any existing FM to get this
    information regarding a TR.
    As it is, i think accessing a Basis table directly from
    ABAP would be the last option.
    Thanks in Advance,
    Rohit.

    Dear,
            Your FM is CTS_API_READ_CHANGE_REQUEST.
    Points?
    Regards,
    VM

Maybe you are looking for