Saving issues in Flash cs5.5

Hi there,
I've been having an inconvenient issue with Flash 5.5 since I've started using it. I'll be working in a file - usually on the large size, but nothing insane - and I'll go to save, and Flash won't let me. (It gives some sort of error message stating it's unable to save.) So I try saving a new version - nope, same error message.
Then, I close out flash, unable to save anything, and I go to open my file again - oh look! There it is, saved just fine. And there's the new verison I saved, also fine.
Usually I end up working in the new version, but as the file gets larger, this tends to happen almost every save which - having worked in broadcast animation for 9+ years - is something I've been conditioned to do every couple of minutes on average. Which means every couple of minutes, I have to save a new version, wait, close out flash, re-open flash, find the new file...It's a realy pain, and I'd like to fix it. Is there a patch I can download, or another solution?
Thanks in advance.
-A

If you don`t already yuse the xfl file format instead of the fla, try this.
If possible dont use network drives for saving.

Similar Messages

Extreme saving algoritm in Flash CS5?..)

Hi all! I want to tell you about one thing that has been occured few minutes ago...
I was working on the project and created the class PlainDistribution, it's quite complex and I've been working on it all day long. And when the work at last is done I pressed Ctrl+S for save it, and at the same moment computer gives me BSOD (win xp)). So I reboot my computer, open flash, and see that file PlainDistribution.as is EMPTY, so it was really empty, when I opened it with UltraEdit I have seen all of 22Kb of the file filled with 0x00 bytes. So it's really buggy thing. Big thnks to authors of Magic Uneraser and guys that created crack for it))) I do not need to spend few hours for re-doing this work on the score of cs5 dev, which do not creating temp file first....

If you don`t already yuse the xfl file format instead of the fla, try this.
If possible dont use network drives for saving.

"Help" issue in Flash CS5

Hi guys,
I have recently upgraded my Flash CS3 to the new CS5 version. Here I have noticed that whenever I get any "Help" by pressing the F1 key. it fetches the help content from Adobe's site. Sometimes it works fine and sometimes it shows me the following error:
"Access denied
We're sorry, you are not allowed access to the service you requested.
If you feel you should have access, please contact the appropriate authorities and give them your IP address.
Thank you for your patience."
Any idea? Who are the appropriate authorities and how to contact them?
Regards.

I found this a few minutes ago and it appeared to work for me too.
http://forums.adobe.com/thread/660535
Also when I signed into the Community Help there was an update... but it looks like the file remained the same. Try updating first and then follow the instructions on the link above.

Flash CS5 crashes when using gradient transform

Hello,
I have a lab of 16 PCs that are crashing. My users report that they crash when they try to use the gradient transform tool. I found 3 consecutive entries in the application event log pertaining to Flash (see below). These PCs are Dell GX280's with 3GHz P4 CPUs, 3GB of ram, and Radeon HD2400 GPUs. Has anyone else had any issues with Flash CS5 crashing like this?
Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 4/25/2011
Time: 10:30:56 AM
User: N/A
Computer: WS-AC-CTD-35510
Description:
Hanging application Flash.exe, version 11.0.2.489, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 48 61 6e 67   ion Hang
0010: 20 20 46 6c 61 73 68 2e     Flash.
0018: 65 78 65 20 31 31 2e 30   exe 11.0
0020: 2e 32 2e 34 38 39 20 69   .2.489 i
0028: 6e 20 68 75 6e 67 61 70   n hungap
0030: 70 20 30 2e 30 2e 30 2e   p 0.0.0.
0038: 30 20 61 74 20 6f 66 66   0 at off
0040: 73 65 74 20 30 30 30 30   set 0000
0048: 30 30 30 30               0000
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 4/25/2011
Time: 10:30:46 AM
User: N/A
Computer: WS-AC-CTD-35510
Description:
Faulting application flash.exe, version 11.0.2.489, faulting module ntdll.dll, version 5.1.2600.6055, fault address 0x0004487f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 66 6c 61   ure fla
0018: 73 68 2e 65 78 65 20 31   sh.exe 1
0020: 31 2e 30 2e 32 2e 34 38   1.0.2.48
0028: 39 20 69 6e 20 6e 74 64   9 in ntd
0030: 6c 6c 2e 64 6c 6c 20 35   ll.dll 5
0038: 2e 31 2e 32 36 30 30 2e   .1.2600.
0040: 36 30 35 35 20 61 74 20   6055 at
0048: 6f 66 66 73 65 74 20 30   offset 0
0050: 30 30 34 34 38 37 66 0d   004487f.
0058: 0a                        .
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 4/25/2011
Time: 10:30:42 AM
User: N/A
Computer: WS-AC-CTD-35510
Description:
Faulting application flash.exe, version 11.0.2.489, faulting module flbridge.dll, version 9.0.0.0, fault address 0x00015fc9.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 66 6c 61   ure fla
0018: 73 68 2e 65 78 65 20 31   sh.exe 1
0020: 31 2e 30 2e 32 2e 34 38   1.0.2.48
0028: 39 20 69 6e 20 66 6c 62   9 in flb
0030: 72 69 64 67 65 2e 64 6c   ridge.dl
0038: 6c 20 39 2e 30 2e 30 2e   l 9.0.0.
0040: 30 20 61 74 20 6f 66 66   0 at off
0048: 73 65 74 20 30 30 30 31   set 0001
0050: 35 66 63 39 0d 0a         5fc9..

Did you ever find a solution to this??? I have this going on and can't figure it out.. I've updated my entire computer and all Adobe CS5 applications I have.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.2.489
Application Timestamp: 4c68dc9c
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e39e
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
CAN ANYONE HELP, PLEASE!
Thank you so much for any advice shared.
E.F.E.

Flash CS5 crashing when saving

OK! What's the deal?
I have just purchased Adobe Master Collection CS5, all $4400 worth! To give the software it's credit, I formatted my HDD and clean installed Win 7 x64 OS. I then clean installed the entire CS5 suite! As I have to somewhat justify the purchase to my boss (who paid for the software), I have gone to continue doing some work, (not even trying out new features!!), I needed to complete a task, so I got onto it.
I opened up an existing file which was created using CS4, noticed a few bugs that arose when published out using CS5 (mainly around the way that fonts were referred as), fixed those, then all was going well. As we have all done, I got involved with the work, and worked for a long time without saving. I realised this and quickly went to save. The dialog box came up advising that it needed to change versions to CS5 (rather than the original CS4), so I cancelled out and did a file Save As.
I thought I would create a new file so that if anything went wrong, I would have a backup. BLOODY LUCKY I DID, as when I went to save as, Flash crashed, loosing all the work I did. I did manage to get a screenshot of some of my AS which was lucky, but when I looked into the folder where I tried to save, there was a completley useless *.fla of 1kb in size which was completely corrupted and couldn't open up.
Resigned to the fact that I lost all my work (nothing new - as we all know it happens every now and then), I thought I would open up Flash, and the very first task would be to save it as CS5 format. Low and behold, flash crashes again, again leaving a corrupted file in it's place. For $4400, you would think you could at least save the work you have done!!
In other tests, it seems it can save new files, and some simple animations created in CS4, but what the hell do I do with all the existing work that I have spent the last year developing? Can someone please help me, as I really cannot work until this issue is resolved.
HELP!
Duncan Buchanan

I have found the solution to fix my file
In my case, I had to remove from the XML descriptor of a movieclip a reference to an FLVPlayback component! (don't ask me why)
I am pasting the XML node I had to remove on the bottom, first the step by step solution in case others may stumble on this.
It seems that movieclips get corrupt somehow, so, in order to find which ones, we have to proceed this way:
solution
1 - if you save your file as CS5 FLA, then rename the corrupt file from xxx.fla to xxx.zip.
2 - Unzip the file, and you are going to have the same directory structure as if you save in xfl. Now, if you open the xfl file inside the unzipped folder, you get the same error you get opening the fla.
3 - Go into the LIBRARY folder. This is a hyerarchical representation of your library.
4 - If like I do, your library is well organized in folders and subfolders, this step will not be too annoying. If you have all library items free in the library, then it could be boring. Anyway... The thing here is to find which library items are causing the problem, so you have to remove them one by one, or in groups, and try to launch the xfl each time. When the xfl gets opened, you have removed the right library item.
In my case, even for very large projects, I have only 4 folders in library's root. So what I did, I tried removing one of them, till I found the rightt one. Then I went deeper and deeper, and eventually found the **** movieclip causing the crash.
If its not an important item, you can just happily continue to work and do it again. In my case, it was a vital component, so I went inside the xml definition, and tried to remove nodes untill it finally opened.
TAHDAH
The file got opened again, just with a missing reference inside that movieclip.
I have read that often an empty frame may cause the problem, so you should look for <element/> tag.
In my case, was a FLVPlayback component.
Find below the node I had to remove (someone from Adobe may give a look)
It is advised untill Flash CS5 doesn't get stabilized on file save (yeah, I know, a detail!) to store your projects as xfl and not as FLA files. (I don't really know why, since a fla file is just a zipped xfl folder renamed as .fla)
Exhausted but happy.
Filippo
                <DOMCompiledClipInstance libraryItemName="FLVPlayback" name="_video" selected="true" uniqueID="8">
                  <matrix>
                    <Matrix a="2.45603942871094" d="2.04177856445313"/>
                  </matrix>
                  <transformationPoint>
                    <Point x="160" y="119.95"/>
                  </transformationPoint>
                  <dataBindingXML><![CDATA[<component metaDataFetched='true' schemaUrl='' schemaOperation='' sceneRootLabel='HighlightItem' oldCopiedComponentPath=''>
</component>
]]></dataBindingXML>
                  <parametersAsXML><![CDATA[   <property id="align">
      <Inspectable name="align" variable="align" category="" verbose="0" defaultValue="center" enumeration="center,top,left,bottom,right,topLeft,topRight,bottomLeft,bottomRight" type="List"/>
   </property>
   <property id="autoPlay">
      <Inspectable name="autoPlay" variable="autoPlay" category="" verbose="0" defaultValue="false" type="Boolean"/>
   </property>
   <property id="cuePoints">
      <Inspectable name="cuePoints" variable="cuePoints" category="" verbose="0" defaultValue="" type="Video Cue Points"/>
   </property>
   <property id="isLive">
      <Inspectable name="isLive" variable="isLive" category="" verbose="0" defaultValue="false" type="Boolean"/>
   </property>
   <property id="preview">
      <Inspectable name="preview" variable="preview" category="" verbose="0" defaultValue="None" type="Video Preview"/>
   </property>
   <property id="scaleMode">
      <Inspectable name="scaleMode" variable="scaleMode" category="" verbose="0" defaultValue="exactFit" enumeration="maintainAspectRatio,noScale,exactFit" type="List"/>
   </property>
   <property id="skin">
      <Inspectable name="skin" variable="skin" category="" verbose="0" defaultValue="" type="Video Skin"/>
   </property>
   <property id="skinAutoHide">
      <Inspectable name="skinAutoHide" variable="skinAutoHide" category="" verbose="0" defaultValue="false" type="Boolean"/>
   </property>
   <property id="skinBackgroundAlpha">
      <Inspectable name="skinBackgroundAlpha" variable="skinBackgroundAlpha" category="" verbose="0" defaultValue="0.85" type="Number"/>
   </property>
   <property id="skinBackgroundColor">
      <Inspectable name="skinBackgroundColor" variable="skinBackgroundColor" category="" verbose="0" defaultValue="#666666" type="Color"/>
   </property>
   <property id="source">
      <Inspectable name="source" variable="source" category="" verbose="0" defaultValue="" type="Video Content Path"/>
   </property>
   <property id="volume">
      <Inspectable name="volume" variable="volume" category="" verbose="0" defaultValue="1.00" type="Number"/>
   </property>
]]></parametersAsXML>
                </DOMCompiledClipInstance>

Successfully using a Native Extension with Flash CS5.5 Pro, having issues

Hey all,
I'm trying to use a native extension due to an app rejection about the new storage guidelines. I'm hoping someone can help me figure out how to use a native extension from Flash CS5.5 and the adt command line utility (I've never used before).
Apples storage guidelines in 5.0.1 require files saved to Documents (and other places) to be marked with the icloud "do not back up" bit. I'm trying to use Adobe's IOS 5.0.1 data storage native extension to do that as I have file sharing enabled and my app downloads files I want the user to be able to copy to their desktop.
From the bits and fragments I'm reading all over, getting it to compile means using the command line adt tool (I've never used it before) because Flash Pro CS5.5 doesn't support native extensions. Also, this native extension requires a v14 SWF published (11.1) and CS5.5 only goes up to 10.2 (or higher if you install the players).
I edited the AiriPhone.xml file and pointed it to an AIR 3.1 airglobal.swc and I have AIR 3.1 overlayed in flash. I can't test AIR for iOS anymore after that change but I can get it to compile a SWF. The adt command line adt utility stopped complaining that my SWF version was 13 when it needed 14, so I assume this worked?
I am trying to compile a debug version so I can see trace statements to see if the native extension reports success on changing the bit. Here is my command line cobbled together from scraps of info on adobe.com and the -help data:
adt -package -target ipa-debug -connect 192.168.1.80 -provisioning-profile myApp.mobileprovision -storetype pkcs12 -keystore myApp.p12 myApp.ipa myApp-app.xml myApp.swf dat AppIconsForPublish Default-Landscape.png Default-LandscapeRight.png -extdir extensionDir
Before this iCloud change this app published directly from Flash Pro CS5.5 without any issues. I am only running into issues getting this app to work with this native extension and/or published correctly.
I am including the folders "dat" and "AppIconsForPublish" as well as splash screens (this app is landscape-only) as well as that extension in the folder extensionDir.
After putting in my password my app compiles into an IPA which I can drop into iTunes. It has the same general size as the IPA generated from Flash Pro. The icon is correct, etc.
When I sync this file, the progress bar goes across, I see it loading on my iPad and then once it goes to install I get a popup saying "iTunes Sync: 'myApp' failed to install."
Is there anything obvious wrong with my adt line? Has anyone else used this native extension? Ideas on what I can do to fix this?
No, unfortunately I did not build this with Flash Builder. I am an avid user of it now and this would be a moot point as it uses ANEs and changes SWF versions trivially. I have to get this to compile using Flash Pro CS5.5 though.
Any help is greatly appreciated!
edit:
Just FWIW, after I updated the .xml to use the latest AIR and such (so the version is 14) I removed the extension, exported purely from Flash Pro CS5.5 and the app works fine. As soon as I enable the <extension> in the XML I can no longer install the app. This just appears to be a noob adt publish issue.

My app downloads PDFs, movies and other information-esque files and saves them to the apps Documents folder so they can be retrieved via file sharing. These files not being in something purgable like /Library/Caches and not having the "do not back up" bit is why I was rejected.
update: It's definitely my command line building.. I took out the native extension completely and published from flash to an IPA and it works. I then run adt on the same SWF that just worked and it fails to install. So the install failing is my command line. I see this article and my command line is very similar. I'm really uncertain why it's failing.

Flash CS5.5 - not saving all frames in symbols?

Hi,
We have a problem where our Flash CS5.5 (mac) does not save all of the frames in a symbol? For example, we animate a walk in a symbol, the symbol is a 'grahpic'. We make a keyframe and reference frame 5 in the walk. Save the project. When we re-open the project there is no 'frame 5' - its blank and so the stage shows the symbol referencing nothing!
If anyone can help that would be amazing, its been happening for months and we have yet to find anyone online who has the same problem,
Thanks!
Garth

We're having the same issue on our project. My coworker is using Windows though, but it's selectively not saving all the frames in a graphic on his laptop. It has severely destroyed our progress on this project now and we're livid. I wish I could help, but I'm searching for a solution as well.
He's been saving to his Dropbox account, we're going to see if that has anything to do with it, like it's syncing with an older version of the file somehow.

Flash CS5 has a serious speed and crash issue.

Hi,
Works PC.
Dell dual core 3.5Gb ram PC. 1 yr old
Launch time CS5 1 minute.
Opening a file is 1min 10sec, saving a file ditto, copying from lib takes 50 secs, pasting to another library 1min, replace existing item, go yes and it crashes.
Install CS5 trial on home very powerful purpose built CAD and video workstation, expect it to fly, but get same times, at least it doesnt crash first attempt but still terribly slow at everything.
Second time I try this routine it also crashes upon replace existing item.
Try saving files as CS4, they open into CS4 in seconds, wow what a difference !!!!, CS5 obviously at fault as a program, but text on buttons is a mess. so thats no good. Thats text created in CS5 not displaying when saved as CS4. Is this program in fact any good ?
File size of source file is 26Mb, of destination is 21Mb. Source has about 14 movie clips, select these and make a movieclip of them, copy/paste it to library of destination and it crashes.
Works PC reinstall Flash twice trying to resolve this, assuming its the prog, still its got these speeds and it crashes when accepting movieClip into Library. Remove the busy layer and try again and it accepts it, still damn slow. The home PC survived the busy layer paste first time round, suggesting the Office PC is at fault. But now its also crashing.
Has Flash CS5 a complexity limit ? These are map layers with many vector shapes on one of the layers, quite a few on three others. That layer seems to be the straw that breaks the camels back. Is 26Mb beyond the limit. I even upped the preferences for memory to 3000kb but no better.
I see on the forums complaints of CS5 speed on saving, users reverting to CS4. I wanted CS4 but was forced to have CS5 as it had just come out. New progs are not the best move but Adobe bully you.
The speed and crashes are prohibitive for business work, 3 days trying to do a mornings work.
I thought it was the PC but others are finding CS5 slow and crashing. What have we here as a prog...useless ! Adobe. you need to fix this. I would go back to CS4, I have it on home PC, but CS5 into 4 has text issues, unless the Office PC used a font not on the home one.
Envirographics

I still cant realize how this buggy piece of **** could make to the market! After I switched to Flash CS5 it became true headache working on Flash projects:
- in constantly crashes on saving, working with library, exiting;
- trying to create file with FLVPlayback throws dozens of errors with references to the classes that even do not exist in configuration folder nor in preinstalled SWC files that I HAD to reference manually;
- publishing in CS4 files that are published properly in CS5 throws tons of errors even though both reference existing classes and are for the same FP10 version.
- saving FLA for CS4 creates huge source file and compiling this file in CS4 creates SWF with 10x size (~280kb in CS5 and ~2800kb in CS4).
Even though Flash CS5 has some nice improvements in interface and ActionScrip editor which I do like, in general it is a complete DISASTER and huge TIME WASTER!

Issues with Flash Pro CS5 on Mac

Hi,
I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
Hi have some issues with Flash Pro:
- when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
Correct:
Wrong:
After entering editing mode:
- after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
- after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
Removing preferences and Application support files didn't help. I also updated Flash to v. 11.0.1, but no joy.
Does anyone know what's the problem?
Thanks a lot.
Mike

Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
I hope this helps anyone else who may run into this problem.
Take care,
Branden

Flash CS5.5 Auto Save Issues

Alright, I've been having this annoying issue with flash. Flash auto saves my project every 10 minutes, but, I would rather have flash save every thirty minutes. This can be very aggravating, because, when every I return to use flash It is saving. When I am in a rhythm working on a project flash interrupts me to autosave.
Autosave is great in that It has saved me having to redo work, but, I would rather choose to save when I am ready.
I tried to change the auto-recovery setting to a different amount of time. FlashPreferences>General>Auto-Recovery
This does not work. Flash will continue to save every 10 min.
Any thoughts or solutions would be appreciated.
Thanks in advance!
-Pat
Bike Lust Comics
http://www.BikeLustComics.com

Thanks Sukhibir! I found the setting and set it to 30 min. I can stop pulling my hair out now!
At first, I was a little confused about where to find the wrench so I made some screenshots to help people find this:
Thanks again!
-Pat
Bike Lust Comics
http://www.BikeLustComics.com

Flash CS5.5 freeze issue when testing movie.

So I've been working on a new animation for several months and I've encountered a problem.
Details: After exporting the swf by testing the full movie, it plays the first four scenes, and then after that it crashes.
The symbols keep going but the movie does not progress past that scene.
I've cut the scene out, removed filters from my vcam and even tried to run it on an older version of Flash.
I read a few forums of people with similar problems and the general answer is that they have corrupt files in their library.
Apparently corrupt files in the library have a 'Preview not available' sign when you click them in the library.
After going through all my library items (It's over 2000) I do not have any with that sign.
I really need help as I've worked real hard on this project.
PLEASE HELP! I use Flash cs5.5
Thanks, Flip.

The number of frames in each scene doesn't look like a problem.
I would suggest you to Keep one scene and split your elements in Movie Clips instead of creating different scenes.
Your explanation suggests that your scenes run continuously and there is no interaction by the user. So you can easily use 6 movie Clips in the timeline instead of Six Scenes.
Let me know if this solution resolves your issue.

Creating app in Flash CS5 issue!

I've been creating an app in Flash CS5, but already early in the process I encountered a lag issue when I got it on my iPhone4. I've created a simple map, with few colors on it, where it's possible to zoom in/out (pinch) and move the map around using a single finger, when the map is zoomed in.
When I start piching in/out it lags, and when I move the map it lags as well.
I have already tried these things:
- Different fps from 8 to 60
- Fewer colors
- Fewer object
- Converting objects to symbols
- Deleted unwanted layers
- Rendered using both CPU and GPU
- Tried fullscreen view and none fullscreen view
Anyone who has an idea on how to reduce the lag issue?

already early in the process I encountered a lag issue when I got it on my iPhone4.
Surprise, surprise... this is one of the reasons why Apple recommends against using third-party development tools, instead of native ones.
Quoted from Apple's "Thoughts on Flash":
+"We know from painful experience that letting a third party layer of software come between the platform and the developer ultimately results in sub-standard apps and hinders the enhancement and progress of the platform."+
You'd be better off asking in the Adobe developer forums for help with their development software.

Flash cs5 saving problem!!

i have an fla file and it was saved as flash cs3 type..
however..now im using flash cs5 and my cs3 file was opened without any problems..
when i was finished my work and just trying to save my cs3 file ..and after responding the reqiurment
of converting the file to cs5 format.. suddenly (during saving) flash cs5 closed by it self and the file
wasn't saved .. and the result of this operation is an damaged fla file found in my save directory..
-sorry for my poor english-
please can any body help me ??

Hi,
I emailed you off-list to get the FLA file to investigate.
FYI - you can report bugs at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform with Product name = "Flash Authoring"
Thanks,
Nivesh

Any known issues with TLF in AIR 2 from Flash CS5?

Hi,
We're creating an AIR 2 application in Flash CS5. Virtually all text is TLF text.
It's a CPU and RAM hog.
Saving the file as CS4, opening it in Flash CS5 and then generating an AIR 2 file works great, although, of course, we've lost all the TLF and the text needs some serious re-formatting.
The development environment is Mac Snow Leopard, with latest OS and Flash updates.
Any thoughts are greatly appreciated.
Thanks,
Kirk

I've had similar oddities with Booting USB drives off several MBP's and am not sure there's a rational explanation of some of the oddities. (I have a twin cable and if one doesn't power it I stick the other plug in and it works 100% of the time)
FWIW This Mac's iSight shows 500/500 +when not in use+ (5,1) while the EyeTV Diversity and external Logitech camera also both show 500/500 - Bluetooth USB controller shows 500/0 even with 3 devices hanging off it ...

Flash CS5.5 crashes when I try to open any files. New ones as well as saved .fla's.

Yesterday I was working in Flash cs5.5 and out of nowhere it stopped responding. So I quit and turned it back on again. Okay, it loaded fine, the screen came up, prompting me to create a new file or open one. I tried opening my old file and Flash stopped responding. Worried that it might be a corruption in my file, I opened Flash up again, this time to try and create a new file. When I clicked Actionscript 3.0, the same thing happened. It stopped responding.
I've tried a few differnet things. From rebooting the computer to deleting the preferences even to uninstalling and reinstalling. Nothing seems to fix this. Can anyone help me out? I would really appreciate it. Thank you.
Here are my system specs:
Windows 7 Home Premium
Asus G73Sw Series
i7-2630QM CPU 2.00 Ghz
8GB ram
64bit

Oddly enough, I opened up Flash again, today, just to see if it was still the same, and it had worked. Everything seemed normal, I opened a new document and started working. Then, out of nowhere it stopped responding again. So I waited for it to respond, it didn't. I closed it from the task manager, and now it's back to the original problem of crashing when I try to create a new document or open an old ontrie
Update: I tried the cleaner, as you'd suggested. Followed all the steps, but to no avail. Think it may have something to do with my machine, and less with the software?

Saving issues in Flash cs5.5

Similar Messages

Maybe you are looking for