Saving Keynote slides as jpeg

Is there a way to save individual slides created in Keynote as .jpg files? I'd like to use slides I've created as pictures in other projects.
Thanks

Welcome to the discussions, Gotta Question.
If you want to use the entire slide, background and all, then you can export to image and choose .jpg. If instead, you have built something on the slide that you want to use in other projects (not the entire slide, just the thing you built on it), then you can use Preview to convert it to a form that can be used in just about any other app on the mac (I describe it on this page)
http://www.makentosh.com/tipsfromtheiceberg/Blog/Entries/2008/6/26Just_Passin’Thru.html
All you have to do is copy the objects, open them in Preview using Command-N, then save as an image (pdf or png are best in my opinion). This way, the image will have a transparent background... meaning you'll be able to use it seamlessly with different backgrounds in different apps.
Message was edited by: Kyn Drake

Similar Messages

  • Export keynote slides as high quality jpeg

    The tool for exporting keynote slides as jpegs at the highest quality setting results in very low quality jpegs (less than 100 k).  How can I increase the quality?

    I just figured it out.  Go to the inspector and select the document inspector (first icon on the left).  Look down near the bottom of that little window for "Slide Size"  and select a bigger slide size to meet the requirements of quality desired.  When i increased my slide size to 1680 x 1050, the export tool produced good quality jpegs (600+ K) from each slide, when I selected the highest quality.   A little hint about this in the slide export dialogue box might be helpful in some future version of Keynote. 

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

  • I made a Keynote slide show completely on my iPhone.  Then I "saved to iTunes", but I cannot find it.  Where does it go?  Can anybody help?

    I made a Keynote Slide show completely on my iPhone.....300 slides.  Turned out great!  However, I went to "save it to iTunes"....but I cannot find it.  Where does it go?  I can't figure it out.....thanks!

    Dock your phone....locate it on the left in iTunes....hit the 'Apps' tab on the right, then scroll down to the 'File Sharing' section below...

  • Saving a Keynote slide as QuickTime?

    Hi! I'd like to save a Keynote slide as a QuickTime video. I'm using an iPad. Can anyone tell me how to do it? (I really hope it's possible!) Thank you so much!

    You have posted in the wrong forum, this is Keynote for Mac.
    The Keynote for iOS forum is here:    Keynote for iOS

  • Keynote slides with video - not linking in Ibooks Author

    Hi
    I have a problem with linking Keynote slides containing videos in Ibooks author. I am using the latest version of both programs on Yosemity (6.5.2 keynote, Ibooks Author 2.2 )
    The keynotes is set up with ‘Links Only’ and it works perfectly in Keynote. In Ibooks author the ‘link only’ is not working and the slides just progresses to next one. Like the Presentation type was set to normal, whether or not I press the link or outside the link. The exact same keynote slides without the video doesn’t have this problem and links perfectly in Ibooks Author. The result is the same testing the Ibook directly on the Mac or on the Ipad Air (8.1.2)
    To make sure about the video types I tried a number of different ones (different Mac/Ipad video conversion programs) all with the same result. The result is also the same whether it plays ‘on page’ or ‘full-screen’ in the Ibook. The videos all plays perfectly but the links are not working.
    Saving the keynote to 09 seemed to solve the problem. I am new to Ibooks author …. And the whole Mac environment. But I am thinking it’s supposed to work without having to do this????
    The same happened when I tested a linked keynote example from Lynda.com. ‘Ibooks essential training’.  Only in the 09 version it was working with the links, when the slides had videos. This example was off course also created in an earlier Keynote version.
    Niles , Denmark

    This is a problem that I've reported both here and via bugreport.apple.com. However, I don't think that it has to do with screen resolution (retina/non-retina). Rather, I think it has to do with setting the widget to "full screen" where transport controls cannot be used and selecting a "Links Only" presentation.
    I used simple forward and back arrows set (Control-click on object) to go to next slide or previous slide. What I found was that while this works as designed when played back in Keynote (OS X or iOS) but not in the Keynote widget. The links only  setting and these hyperlinks are totally ignored in the Keynote widget. Tapping anywhere went to the next slide. Tapping on the back arrow also went to the next slide,

  • Import Keynote Slides into Imovie

    Is it possible to import a Keynote slide into Imovie? If not, is there some way to create a "call out" word balloon and make it appear with a still photo in Imovie?

    photoBob6 wrote:
    Is it possible to import a Keynote slide into Imovie?
    sure ..
    https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/keynote
    demoes the usage of Keynote with iMovie.
    you can use 'animated' presentations or single 'charts' as jpegs ..
    .. If not, is there some way to create a "call out" word balloon and make it appear with a still photo in Imovie?
    two options:
    • prepare the still in some 'paint'-app, demoed here:
    https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/movie-magic- with-stills
    • use the 'transparent-png-trick', demoed here:
    https://sites.google.com/site/karstenschluter/imovie09tricks

  • Keynote slides to podcast

    I would like to export keynote slides to use in a podcast. Does anyone know an easy way to get the slide to resize to about 300x300?
    G5   Mac OS X (10.4.8)  

    many podcast apps will do the resize for you, or you can do what I do: set up an Automator droplet that resizes all images dropped on it to 300byX (sometimes the other measurement is smaller than 300, but never larger). It then saves them all as jpegs.
    It was fairly easy to setup as the finder actually can do the resizing, so everything you need already comes with Automator, there's no need to install other scripts.

  • How can I create a full-screen view of Keynote slide in Snow Leopard?

    How can I create a full-screen view of my Keynote slides in Snow Leopard?
    I'm going to be importing into ScreenFlow to create a video.
    Thank you!!

    Welcome to Apple Support Communities.
    Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
    Run the Keynote slide presentation in full-screen mode, then...
    Static full-screen captures - use Command+Shift+3.
    Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
    If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
    (I'm on iLife '09.)
    Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
    Message was edited by: kostby

  • Saving a Slide Show

    I CANNOT seem to save a slide show such that I can fine it again.
    When I hit "save" in the Slide Show Editor, it gives me this message:
    SAVING YOUR SLIDE SHOW PROJECT ENABLES YOU TO MAKE CHANGES TO THIS SLIDE SHOW LATER. YOUR SLIDE SHOW PROJECT WILL BE SAVED TO THE PHOTO BROWSER WITH TODAY'S DATE. YOU MAKE NEED TO CLEAR YOUR CURRENT SEARCH IN ORDER TO SEE IT.
    So, I click "okay" and then exit out of the Slide Show Editor and go the Photo Browser. Then I get this message:
    YOUR SLIDE SHOW HAS BEEN SAVED AND IS SELECTED AT THE TOP OF THE PHOTO BROWSER.
    And then I can't find the slide show ANYWHERE in the Photo Brower.
    Can anyone help me with this?????? (Please?)
    BTW, this is with Photoshop Elements 4.0. I use a PC.

    >I DEFINITELY tried this. The Creations menu was empty. Does that tell you something?
    Well it does not sound good.
    1- Do a File > Catalog > Recover
    that does a Catalog cleanup.
    Does that make any difference in what you see displayed?
    2- Then try this -
    go to the View menu > Media Types and only have Creations checked.
    Be sure that you are viewing All Photos(in order to satisfy the Clear your Current Search instruction of the message) If you use Folder Location be sure that all Folders are being displayed.
    What do see now in the thumbnail area?
    Be sure to go back to View > Media Types and recheck Photos and others. The settings for Media Types are sticky - so if you do not go back and recheck the others, you will wonder why you can't see your photos next time you use PS Elements.

  • Is there a way to link to document on ipad from keynote slide?

    Is there a way to link to a document on ipad in a keynote slide?  Don't want to link to external webpage.  Thanks.

    Better to ask in the community dedicated to iWork for iOS. Not all of us here have iPads.

  • I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

    I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

    Try dragging the image to the desktop, then drag the image to the slide you want it on

  • Saving a slide show when catalog runs from flash drive

    A little background - I manage two separate classes of students who use the same laptop with PSE8.  Each student has their own flash drive to save a custom catalog for the PSE8. Each time students open PSE8 they load their custom catalog.  All image files are saved onto the flash drive.  We have been using custom catalogs because our computers have Deep Freeze installed. This system has worked well for images.
    When saving a slide show there is no way to specify where the slide show should be saved.  I assumed that the slide show would save to the catalog which is sitting on the flash drive.  Unfortunately, this is not the case.  How can I save a slide show on a external flash drive?  I want students to be able to save and be able to reopen their slideshows.
    thanks,
    Robert

    Robert,
    Right now,I am looking at my current PSE 7 install on Vista. There is a .psess file type which contains slide show project information. I suspect that this might be the file you are seeking.  And I think this file exists with the same purpose in PSE 8.
    For PSE 8, you might find those files under a folder structure of
    ..... \Elements Organizer\Catalogs\name of the specific catalog\projects
    I desginated the dots at the beginning of the folder structure because they could be different depending on what version of Windows is running and potentially even other installation choices specific to that machine.
    Therefore, you might try searching for the .psess slide show project file type.
    Note 1: I am not sure v8 will place the project folder and the .psess files in your case where you have used a custom location for the Catalog that is on a flash drive. Please post back here with the location where you do find the files
    Note 2:  I suspect that if you are teaching syncing to photoshop.com, you might also need to be concerned about the location of the syncdb folder. My guess would be that it is near that project folder. If you do determine the syncdb location, please also post it back here. Thanks.

  • How do I copy a Keynote slide and paste it into a new project?

    Running MacBook Pro OSX 10.9.5
    Keynote v. 6.2.2
    How do I copy a Keynote slide and paste it into a new project?
    jazzpsy

    open the first Keynote
    in the navigator panel, click on the slide to be copied to select
    command C to copy
    open the second Keynote
    in the navigator panel, click the slide before where you want the slide to paste, command V to paste

  • HT4108 Can I use the VGA adapter to show keynote slide shows on a projector?

    Can I use the VGA adapter to show keynote slide shows on a projector?

    iPad 1 does not do screen mirroring like the iPad 2.
    Open the app you want to output and see if it works.
    http://support.apple.com/kb/ht4108

Maybe you are looking for