Saving large files to external drives question

I work with large video files. When I save files to a drive it would be very helpful if, when I navigate to the drive, there was a note telling me how much space was available, before saving and then only to be told ten minutes later the drive is full halfway through the file export.
Am I missing something? Is there an option to switch this option on in the finder somewhere?

Marc,
It's not automatic but what is the problem with highlighting the drive and pressing Command+I ('eye). That will give a box with the details in it? On this Mac pro I have 'iStat Menus' installed. There are four volume partitions on an external for backups, a Time Machine drive and the system HD. iStat Menus gives me drop down icons in the menu bar and one of them displays, on click, the full set of volumes with their 'Free' and 'Used' and the volume names. The app also has all sorts of other information on component temperatures and wattages and a graphical rpresentation, changing with time , of disk usage. What you display is controlled by a preference pane. "iSlayer' are the writers.

Similar Messages

  • Can't Copy Large Files To External Drive

    This is driving me nuts. I'm running 10.4.11 with an external Newer Tech Ministack 320GB hard drive that's only ten weeks old. Yesterday I downloaded some large (50mb or so) QuickTime files to my desktop, which is to say my internal drive. I then tried to copy them to my external drive, since that's where I keep my movie files since they take up so much room. One copied over without any trouble, but numerous attempts to copy the others result in the process freezing after anywhere from 1/4 to 3/4 of the data has been copied, or else I get the "error 36" message. My first thought was that the external drive was failing, but I can copy small movie files (10mb or so) back and forth between the two drives with no problem. What's the point of having a large external drive if you can't use it for your large files? Repaired permissions on both drives, no improvement.

    I have repaired permissions and run disk repair on the internal drive as well. Yes, I've played the clips in their entirety, but I'm going to do it again and look for any hiccups. That's an interesting theory and I want to check it out.
    It has occurred to me that a workaround, although it by no means addresses the underlying problem, is to use QuickTime Pro to chop the clips up into several smaller files, copy them to the external drive, and then reassemble them via QuickTime Pro on the external drive.
    FWIW, I neglected to mention (although I don't know if it's pertinent or not) that immediately after installing the external drive ten weeks ago I used SuperDuper to clone my entire internal drive onto the external firewire drive. I then erased the movies from the internal drive, which was bumping up against maximum capacity. I am able to boot from the external drive, and I want to retain this capacity should the internal drive (which is, after all, six and a half years old) fail.

  • If I saved something on my external drive as a back up / time machine can I delete from laptop without losing anything?

    if I saved something on my external drive as a back up can I delete from laptop without losing anything?

    No. Eventually, Time Machine will delete it from the backup. Time Machine is not a storage concept, it's a backup concept. If you need permanent file storage, then get another drive for that.

  • I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    Do some testing to get your method working right with some less than important footage.
    Copy/paste files where you want then.
    Use the FCE Reconnect feature to tell FCE where the newly copied files reside.
    Make sure the new location and files are working as expected with your Projects.
    Delete the original files if no longer required.
    Al

  • Can spotlight search for files in external drives?

    I was wondering If I can index my hard drives so that when I do a search in spotlight, they show up along with the files in my primary drive.
    Is this possible?

    Yes, but due to connection reliability of external drives, and the constant background noise that is required to keep the index up to date on them, I turn it off for external drives. I use File Buddy or Easy Find to find files on external drives.

  • Finder can't find / display files in external drive

    Just upgraded to Lion on my MacBook, and Finder can't find / display files from my external thumb drive. I got message that the external drive was removed incorrectly, but I did not remove the thumb drive at all. After several attempts on removing and inserting the thumb drive, the files just didn't show up under Finder, and I have no way of working on files from external drive. I went to a Window based notebook and checked, the files are still in my thumb drive so they have not been corrupted, hopefully. How can I make Finder works with external drive in Lion ?

    The problem I have was finally resolved by having a "clean" install for Lion, meaning to back up your hard disc, re-install Snow Leopard, then Lion. It's a lot of work but my MacBook is now working.

  • Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop

    Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop can I put all the dated folders into one single folder

    Drag and drop should do the job. Or move the files (or folders) in your operating system and then re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
    Yes, you can put all the dated folders into a single folder (but if you plan to do this, then don't try move the files using your operating system and re-link)
    Export most definitely isn't the solution.

  • Can photo library be saved direct to an external drive?

    can the iphoto library be saved directly to an external drive?

    Not "saved" - Moved
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • It is very difficult to import audio files from extern drives (NAS) into the new garageband

    it is very difficult to import audio files from extern drives (NAS) into the new garageband.

    Are you trying to open an audio file in GarageBand or a GarageBand project?
    To open an audio file drag it from your NAS to a real-instrument track in GarageBand.
    If you are trying to open a GarageBand project - can you open the same project, if you copy it to your system drive?
    Trying Google translate -
    Bent u probeert om een audiobestand in GarageBand of een GarageBand-project te openen?
    Om een audiobestand slepen uit uw NAS naar een real-instrument track in GarageBand openen.
    Als u probeert een GarageBand-project te openen - kunt u hetzelfde project opent, als u het kopiƫren naar uw systeem schijf?

  • Importing masters from iPhoto to Aperture 3 and saving as referenced files on external drive

    I'm making the move from iPhoto to Aperture 3.I'm new to Aperture 3 and want o make sure I am importing and saving correctly. So far, I have imported my library of events from iphoto to Aperture 3. I understand that for the most part, it makes sense to house this library on an external drive as "referenced files" vs within Apeture as "managed files." I'm not clear on exactly how to accomplish this set-up. Is this something I should have set-up when doing the initial import or can I move the files now? Once this is done, when importing new files, how do I import to Aperture 3 but save on external drive?
    Thanks in advance for your help!

    A fabulous answer:
    In the olden days ( ) when hobbyists made their own telescopes from kits, everyone wanted a six-inch lens, and the kit makers shipped six-inch lens blanks.  Which the hobbyists used to learn lens grinding.  Which is arduous and requires skill.  Which the hobbyists didn't have until they'd ground that six-inch blank -- an expensive piece of high-quality material at the time -- into a lumpen flawed approximation of a good lens.  Then the hobbyists would contact the kit makers and ask for another lens-blank, so they could build their telescope.  At which point they would drop the project because the six-inch lens blank cost so much.  And much calumny was rained on the kit manufacturers.
    Now the kit manufacturers wanted to promote a hobby, and make, in addition to telescope kits, money (not calumny), so they together and separately hit upon the idea of supplying the hobbyist with _two_ lens blanks: a four-inch blank, and a six inch blank.  Nobody wanted a four-inch telescope -- but that's not what the blank was for.  The instructions read (I've shortened this part) "Grind the four-inch blank into the most perfect lens you can.  Check it and re-check it.  Now throw it out.  You likely now have the skill to grind the six-inch blank into a useable lens."
    Thus endeth our fable.
    The point, of course, is:  start small and gain skill before committing time and material to a task.  Port just a small sub-set of you photos into Aperture.  Experiment with it.  Try different workflows.  Think about how to best use the containers and organization tools Aperture provides.  Develop a long-term naming convention for files and Projects.  Work out a back-up strategy that is scalable and that you will stick with.  My specific recommendation for beginners is: don't worry about Referenced v. Managed at first.  Make all your Masters Managed.  When you have your four-inch Aperture Library all smooth and even, put the entire thing in the system trash -- and then you can start working on an Aperture Library fit for your photos -- one that will allow you to see far, and clear, for years.
    Good luck.

  • Can't copy large files to external hard drive

    I have a 500gb western digital my book home edition with firewire/usb/esata connections. I want to copy some large video files (1gb and higher) to this external drive but I keep getting this message: "sorry, theoperation could not be completed because an unexpected error occured (error code-1309)."
    what is the dealio?

    You have to erase the full drive (not the partition) which is why it is better to click on drive icon, then PARTITION tab, and set to new partition(s).
    Click on OPTIONS.... below and set it to something other than Master Boot Record.
    Click APPLY and then go back and apply the new partition scheme. You can also click SECURITY OPTIONS to zero or do 7-way write erase, but I don't think you actually need to.
    Using Disk Utility to format drives should be in "Disk Utility 101". Even the Help menu in Disk Utility has what you need to format, initialize and use all the features. Use the instructions for how to setup a drive for TimeMachine would be excellent also.
    http://www.apple.com/support/leopard/timemachine/

  • Itunes with 10.3x not transferring large files to external hard drive

    I have been unable to transfer any large files, basically anything over over two artists or so from old external hard drive for my old windows xp computer to my new external hard drive (both iomega and western digital have been tried) without the transfer cutting out and popping up a message to effect of itunes can not copy or add file to folder...something like that. am i missing something that i need to be doing? ive got about 33,000 items, and the thought of doing them 10-15 at a time really isn't something i want to do. But as of this point, i can't find a way to simply xfer the whole itunes library from the old external to the new one. Thanks for any help.

    You can transfer purchased content ONLY! Unfortunately, you have no choice as to what gets transferred. Here are some work arounds
    1. Delete off iPod Touch/iPhone/iPod then transfer
    2. Transfer all content then delete from computer

  • Copying large files to external hard drive won't work

    I tried looking for this all over google and here, and i could only find old threads that didn't end up with a clear answer, so i decided to post one of my own for the first time.
    Basically, I have folders of music and movies that i'm trying to move over to the external hard drive (2tb WD my book studio using firewire 800) and at one point during the copy, the finder copy window will get stuck and won't move any further. So the copy doesn't go on, and even if i try to cancel it only the beachball starts rolling and finder won't respond until i restart or unplug my external.
    The weird thing is that even when I was copying a few folders that weren't too big, around 2gb or so, it did the same thing. BUT when i took 3 individual avi files that were around 3gb it copied fine.
    I really don't understand what's going on, and I want to just take the entire folder, let it copy, and go do something else rather than sit here moving file after file.
    Does anyone have any idea as to what's happening? I'm not sure whether to blame my imac or my external. external does time machine back ups fine tho.. I have it split into 2 partitions, one for tm and one as a FAT drive. Any help would be great! Thanks!

    All right. So let's say your hard drive is named 'WD MyBook' or something like that.
    Let's also say the folder you're trying to copy is your Documents folder.
    In Terminal, you'd type:
    sudo ditto pathToDocuments pathToWDMyBook
    Now obviously, those are fake paths and don't actually represent where those things are, but that's to illustrate the syntax you need to use.
    Your external drive path will be something like this:
    /Volumes/WD\ MyBook
    The trick here is that if there's a space in the name of the drive, you need to substitute a "\ " for the space. You can also put single quotes around the whole thing like this: '/Volumes/WD MyBook'
    Everything here is case sensitive. You can also drag the icon for the external drive into the Terminal window, and it will paste the path into Terminal for you.
    So the full example would turn out to be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook
    If you wanted to make sure everything went into a specific folder on your external, you'd need to add that to the path you specify. For instance, if you want everything to go into a folder named Backup on your external, the command would then be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook/Backup
    Either way,
    sudo ditto source destination
    That's it, just spaces between everything. Like I said before, you don't need the sudo necessarily, depends what you're copying.
    I don't know if that makes any sense, I'm a little out of it today. Let me know if you need further clarification on any of that, or let me know what you're copying/where it's going and I can probably help you with the syntax. Or just drag and drop! It's easy.

  • Copy large files to external hard drive

    How do I copy files fromone external hard drive to another external hard drive via mac book air

    Gregory Taddeo wrote:
    How do I copy files fromone external hard drive to another external hard drive via mac book air
    If its from one drive TO A BLANK / NEW HD, and its a LOT of files (400+ GB)
    then just use Superduper cloning software to copy it all in one click and sit back and let it work
    free to use
    http://www.shirt-pocket.com/SuperDuper/superduperdescription.html

  • CS6 very slow saving large files

    I have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. For this reason I have had to disable the new autosave features, otherwise it just takes far too long.
    CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
    I am finding the new layer filtering system invaluable so would rather not go back to CS5. Is this is a known issue or is there something I can do to speed up the saving process?
    Thanks.

    Thanks for the quick replies.
    Noel: I did actually experiment with turing off 'maximize compatibility' and compression and it had both good and bad effects. On the plus side it did reduce the save time somewhat, to somewhere a little over 10 minutes. However it also had the effect of gobbling up ever more RAM while saving, only leaving me with a few hundred mb's during the save process. This is odd in itself as it actually used up more RAM than I had allocated in the preferences. The resulting file was also huge, almost 35 GB. Although total HD space isn't a problem, for backing up externally and sharing with others this would make things a real headache.
    Curt: I have the latest video driver and keep it as up to date as possible.
    Trevor: I am not saving to the same drive as the scratch dics, although my primary scratch disc does hold the OS as well (it's my only SSD). The secondary scratch disc is a normal mechanical drive, entirely separate from where the actual file is held. If during the save process my primary scratch disc was entirely filled I would be concerned that that was an issue, but it's not.
    Noel: I have 48 GB with Photoshop allowed access to about 44 of that. FYI my CPU's are dual Xeon X5660's and during the save process Photoshop isn't even using 1 full core i.e. less than 4% CPU time.

Maybe you are looking for

  • Is it possible to have auto login on SAP SBO?

    Hi all, I have a situation where the SAP SBO would have to be able to log in by itself after the workstation reboots. Is it possible to do that? It doesn't really matter to us under which account it should log in and how. Thanks for all hints! Andre

  • Replaced Hard Drive--How Do I Get My iTunes Account Back?

    Hi all, My hard drive melted down. Because it had corruption on it, I couldn't simply transfer the system to the new drive and have had to reinstall software from discs and drag my data over from my external backup. I have done that with iTunes too,

  • REQUEST new bios for MSI R9 290 GAMING 4G

    Hi Current version...is not possible to insert a link to a file. Forum report - "Sorry, you are not allowed to post external links" S/N:602-V308-07SB1402051305 Thanks

  • Remove Movies Home folder

    Hi everyone. I want to remove my home 'Movies' folder, but Mac said it is unpossible. How to fix this?

  • Firefox 19 suddenly became very slow after using it for about an hour.

    I've been using firefox 19 since it came out and have experienced no problems. Now today after about an hour of using the browser it has become so slow to the point where it becomes unresponsive for about ten seconds when I try to switch to a differe