Saving Masks in Speedgrade CS6

I'm working on a video project where we have to use the same mask for multiple shots. The problem is, we can't find a way to save the mask so we can use it again. I'm aware of Adobe's update dated June 7, 2012 which states, "Saving a mask by dragging and dropping mask clip to mask store." Didn't work unless what I think is the mask store is not. Would someone please clarify how this operation is done?
Thank you!
BTW, we're running it on a Mac.

Hi,
Just as you write "saving a mask by dragging and dropping...". The key is that you have to drag
the grading layer or the clip -depends on which one has the mask- then you
have to drop it to the mask store on the bottom of the screen in the mask panel.
Best wishes

Similar Messages

  • Problems with Adobe Speedgrade CS6 in Windows 7

    I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
    Windows 7 Ultimate SP1
    Gateway FX 6800-01e
    2.67 GHz i7 Quad-core processor
    16.0 GB RAM
    750GB primary hard drive (Seagate ST3750528AS)
    2 - 2TB secondary hotswap drives
    NVidia Quadro 4000 w 2GB dedicated RAM
    2 Acer 231SHL HD monitors running in extended dual screen mode
    Adobe Speedgrade 6.0.4x25
    It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference.  I have also tried uninstalling it and reinstalling it.  I have also applied the latest update through the program interface. The other components of the suite I have installed are:
    Premiere Pro CS6
    After Effect CS6
    Acrobat XI
    Audition
    Bridge
    Photoshop (32-bit and 64-bit versions)
    Lightroom 4.3
    Prelude
    The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped.  Thanks in advance!
    -Carl Hayes
    "What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

    Hi,
    Have you get rid of the problem ?
    I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
    It's on windows 7 pro.
    Thanks in advance

  • EDL Files exported from Premiere always fail on import to SpeedGrade CS6

    Steps to reproduce (for me):
    1. Export any sequence as EDL.
    2. Open SpeedGrade CS6
    3. Browse to EDL
    4. Double Click, or click the +, or drag to timeline
    5. Error thrown:
    Error
    Key not supported in edit 16
    File: 016 AX     V           B 0:02:04:04 00:02:06:15 00:00:3:10 00:00:35:21
    Line 34
    Note: This varies depending on project/sequence but essential is the same error for each -- always "Key not supported" though line # and file info changes.
    Any help would be GREATLY appreciated.
    Best,
    Seth

    EdanCo I'd like to know the exact same thing. It's now September.
    I also have multiple layers, have spent some 70 hours building this project and simply want to adjust colours. For workflow one could colour correct before editting but that does not make sense/sence.   As for editing this way like Manual LP, really likely would work but surely would add additional time to the project trimming everything into one line. Who does that? I may as well have my 1/2 inch analog film out with a splicer and start editting analog film... hahaha  it seems it's a very round about way of doing things - But Manuel LP I really do commend you for finding a way around it, and figuring out a work flow that incorporates bypassing this EDL error.  Thankyou, I may do that on the next project   The rest of us sit around waiting and grumbling at the problem.
    HELLO wonderful people at Adobe.... has there been a solution to this? Or has anyone found one? Really would love to find out. Please hear the people, and let us know even if the issue is being sorted, in this thread.
    Chur!

  • SpeedGrade CS6 keeps crashing on render

    I have a Macbook Pro with 2.6 GHz i7 with 16 gb of ram updated to the latest OS X (10.8.5) 
    SpeedGrade CS6 keeps crashing on rendering.  I have selected a couple of output options (h.264, ProRes, and uncompressed), but none work.  I believe I have the latest update to the software (I believe 6.0.4), and I don't know if this has anything to do with the OS or the program itself.
    Is anyone else experiencing this? I have checked the forums, but they haven't really helped that much for me.
    EDIT:  To add further, I have restarted my computer and I have rendered video successfully in the past.  This just started happening today.

    W7 Ult x64, AMD Phenom X6 3.3GHz, 16gigs of RAM, GTX 550 Ti
    I'm rendering WMVs. I am not running out of disk space. I have tired various clips to render with (I'm assuming source files are the files I edit to render). What are comp settings?
    My settings have worked in the past, but not after my most recent format. Settings: http://imgur.com/a/0yDsF

  • A file which was created and saved using Adobe Photoshop CS6 is not opening anymore HELP

    Hi, please help with my issue which is as follows:
    A file which was created and saved using Adobe Photoshop CS6 is not opening anymore and sends a message saying that the file is not compatible.
    What should I do, I have invested so much in that file and I dont think i will be able to do it all over again.

    That's why people do incremental saves and use backups... You could try to open the file in an image viewer like IrfanView and see which parts are salvagable, but that's as good as it gets most likely...
    Mylenium

  • I have Speedgrade CS6 installed on my Mac and i have problems renaming my layers when I am grading. I was wondering if anybody can tell me how to rename my layers(Under the look tab). If not, is it because thins is not possible in Speedgrade CS6.

    I have Speedgrade CS6 installed on my Mac and i have problems renaming my layers when I am grading. I was wondering if anybody can tell me how to rename my layers(Under the look tab). If not, is it because this is not possible in Speedgrade CS6.

    No you can't. Renaming grading layers is a features since version 7 a.k.a. CC. Time to upgrade?

  • Cannot Render from SpeedGrade CS6

    So, I'm doing some testing to see if SpeedGrade CS6 is for me or not, and honestly…I love what I've seen so far. But, I'm having an issue that's probably easy to resolve (no pun intended), but for the life of me I can't figure out why.
    I put a quick sequence of 4K R3D files together in Premiere CS6, exported an EDL, opened the EDL in SpeedGrade and linked back to the footage. Everything seems to work fine. I've graded my clips, added a vignette, and now I'm trying to render/export. But the "Render" button seems permanently greyed out. No matter what combination of output options I choose, it just won't let me start a render session. I'm running the latest CS6, updated via the Adobe Updater. I'm working on a 15" MacBook Pro with Core i7 processor and plenty of RAM. The only connected peripheral is a Thunderbolt RAID setup.
    Any ideas why I can't render?
    Thanks!

    Hello Stephen,
    simple things first...
    Did you set an output name?
    If not, the render button will be grayed out.
    Cheers
    Thomas
    Am 21.06.12 21:25, schrieb stephenamick:
    >
          Cannot Render from SpeedGrade CS6
    created by stephenamick <http://forums.adobe.com/people/stephenamick> in /SpeedGrade/ - View the full discussion <http://forums.adobe.com/message/4511674#4511674

  • Adobe SpeedGrade CS6 6.0.3 Update

    Does any one know what this is all about ?
    Adobe SpeedGrade CS6 6.0.3 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
    Thanks Bj.

    Hi BJ,
    Might try installing the 6.0.3 update from here instead
    Win
    http://www.adobe.com/support/downloads/product.jsp?product=184&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=184&platform=Macintosh
    -Dave

  • Saving my design in CS6 is now corrupted - please help!

    Hello,
    I saved a design in CS6 which recorded the save as 100% completed.
    However when I now open the document I get an image of a red line (left screen shot).
    I have also tried to open this in Fireworks and the preview is correct (right screen shot) but when it opens in full I get the red line again.
    Does any one know what the issue is and whether this is retrievable as this design is the accumalation of two days work?
    Kind regards.

    It doesn't sound promising.  I can see it was saved as a PSD, in which case I believe the preview is an embedded JPG, so not necessarily indicative of the file integrity.  Does its file size on the HDD tally with what you’d expect?
    It also looks like you are using Windows.  Is that right, and if so, what version?

  • Fxphd Fastforward: SpeedGrade CS6 Fundamentals | Learn SpeedGrade CS6 | Adobe TV

    SpeedGrade CS6 Fundamentals will quickly get you up to speed on how to more effectively use the new grading software from Adobe. Taught by Joost van der Hoeven, this all-new course contains over three and a half hours of training covering the fundamentals you need to know to get most out of this new release. It also contains almost 1GB of source material used in the classes so you can follow along with the instruction.
    http://adobe.ly/P4DVgN

    I am starting the Speedgrade CS6 Fundamentals tutorial but cannot see where the 1 GB of Source files are located for download.

  • Premiere/Speedgrade CS6 install crashing (Mac OS)

    Hi,
    I downloaded the trials for Premiere Pro CS6 and Speedgrade CS6 and installed them hoping to activate them with my Creative Cloud license when that comes to life. The first time, the installation went successfully but the applications wouldn't launch. I thought maybe the problem was with my CS5 install so I uninstalled it and ran the cleaner utility. After a few cycles of running the cleaner utility and uninstalling CS5 and CS6 I am now unable to even get the install going properly, I start the install and after 2% get this error:
    Installation Failed
    Your installation encountered errors.
    The error summary file may help you identify the issue.
    The error summary file looks like this:
    Exit Code: 7 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s), 0 warning(s)  ERROR: ASU has quit unexpectedly. -------------------------------------------------------------------------------------
    System Requirements
    I would like to get this working soon but fortunately I can survive in FCP until then.
    Adrian

    Check after following these step:-
    1) ShutDown you Mac
    2) Boot the Mac while holding down the shift key untill the Login Window appears
    3) Login and open the CS6 Disk Image
    4) Copy the contents of the disk image (Blue PS Icon) to the desktop
    5) Launch the installer from the desktop NOT the Disk Image
    6) In my case it installed just fine....
    7) Reboot the Mac so that the without the Shift key to re-enable the system extensions

  • Speedgrade CS6 - Tangent Wave support

    Speedgrade cs 6 doesn´t work with the tangent wave. In previous versions like Speedgrade DI or Speedgrade NX - no problem!

    Yes, it is a german version.
    Am 22.05.12 16:18 schrieb "Milan Hamos" unter <[email protected]>:
    Re: Speedgrade CS6 - Tangent Wave support
    created by Milan Hamos <http://forums.adobe.com/people/Milan+Hamos>  in
    SpeedGrade - View the full discussion
    <http://forums.adobe.com/message/4429122#4429122>
    Hi Raimund, are you using a localized (non-english) version of SpeedGrade?
    Replies to this message go to everyone subscribed to this thread, not directly
    to the person who posted the message. To post a reply, either reply to this
    email or visit the message page:
    http://forums.adobe.com/message/4429122#4429122 To unsubscribe from this
    thread, please visit the message page at
    http://forums.adobe.com/message/4429122#4429122. In the Actions box on the
    right, click the Stop Email Notifications link. Start a new discussion in
    SpeedGrade by email
    <mailto:[email protected]>  or at Adobe
    Forums
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1=14=4637>
    For more information about maintaining your forum email notifications please
    go to http://forums.adobe.com/message/2936746#2936746.

  • Mask from Speedgrade via lumetri  in PProCC Bug?

    I create a mask in Speedgrade and want to use it in PProCC via Effects/Colorcorrect/ Lumetri.
    As long as the mask is inside the picturesize (speeedgrade) all is ok.
    As soon as the outer line from the mask mask goes outside the picture(speedgrade), the mask as an artefakt in PProCc on the left side.
    bg
    alex

    Thanks Dennis,
    Yes works now,
    just let you know that we had to upgrade both  Speedgrade and PPro.(checked on another worstation)
    Won`t upgrade PPro on currenttly workstation, because we are middle in a project.
    bg
    alex

  • Creative Cloud Reinstall - SpeedGrade CS6 crashes

    Just recently my SpeedGrade CS6 crashes on launch on my iMac (this is a recent development). How do I go about reinstalling it?

    There should be an uninstaller listed in:
    Mac HD > Applications > Utilities > Adobe Installers
    After uninstalling it there you should be able to reinstall it through the Adobe Application Manager.
    Hope that helps,
    -Dave

  • How do I tell premiere to send whole sequences to Speedgrade CC instead of Speedgrade CS6?

    I would like I color correct an entire sequence in Speedgrade CC in order to utilize the Match Color function but any time I choose the "send to Speedgrade" option, it autoimatically defaults to CS6 which unfortunately does not have match color. Is there anyway I can stop premiere from defaulting to Speedgrade CS6?

    Then you have two options:
    - use the CS6 Send to SG option. Save the .ircp in SG6. Then open SG.CC and open that .ircp.
    - If you can wait a little bit, use the 7.1 builds (due later this month ) and use Direct Link between PrCC.1 and SG.CC.1

Maybe you are looking for