Saving Movie creates multiple files

It seems that every time i save a movie project a new file is created.
I now have three project files, for the same project.
Am I doing something wrong?
Should I be continually throwing out files?

Matti,
I was looking at the project properties in get info & I must have accidently ticked "lock". After that When I tried to save the project a message appeared telling I could not save because I didn't have access to the file. I can't recall exactly if it offered to save in another location or whether it did it autimatically .
Any how later on I noticed I had multiple projects & to test this I pressed save & observed a new project file appear. As this was all happening in the middle of any & eveything that could go wrong (at the time) I just took it to be 1 more exposed problem. So I retraced my steps & sure enough the project had a lock icon attached. so that was easily fixed!
I could delete all the following project files because I had not made any changes . Also it was only a test project to bring out problems.
Mark

Similar Messages

Acrobat 9 Pro - Batch Create Multiple Files from InDesign CS5 files

When attempting to batch create PDFs from Indesign CS5 files using Acrobat Pro 9's File>Create PDF>Batch Create Multiple Files ... option the operation fails with the error 'Could not find the application that created this file: [path to file] Please select a file created by an application that resides on your computer.' as shown in the screenshot below:
Acrobat 9 Professional was bundled with Creative Suite 5 Design Standard so shouldn't this work? My machine is running OS X 10.6.7, Acrobat Pro 9.44 and InDesign CS5 7.04.
Any help to solve this issue would be most gratefully received - this feature had previously saved me a lot of time on my old machine with 10.5.8, Acrobat Pro 9 and CS4.

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

Premiere CS4 is Creating Multiple files when rendering

We have used Adobe Premiere for just over seven years now with great success. Five days per week we create videos with Adobe Premiere with three computers. We presently upgraded to the new CS4. The computer that that program is installed on is used to edit 30 and sixty minute television shows. The files start out as .AVI files then, when finished they are rendered and saved as MPG2 files.
We are currently experiencing a problem with this new program that we have not ever experienced in the past. Description of problem:
We import a 30 or 60 minute .avi file into a project. We then place it on the timeline. On these timelines there are only the video layer and the audio layer, no more than that. We then make the editing changes that are necessary. We then go to export the file to the Adobe Encoder to be saved as a MPG2. When we do this, while in the process of encoding the file, Premiere will create four (4) files when it was not told to do so. When this happens of course with a 60 minute file, it can take a very long time to encode, (because it is creating multiple files). We have needed to stop the process, and change the name. This sometimes works, and sometimes it does not.
We are hoping that someone has come across this before and can help us. I have looked at different sources to find the answer to this. I called Adobe direct, and it was suggested that I try this forum. Any help would this would be very appreciated. Thank you.

OK. These are all of the screen shots with the settings. I hope that you can find something.
Thank you

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
     . // Create XML for each row and Marshal the object into to the String Buffer
     String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
     conf.put(KEY_FILENAME, strFileName);
     arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
     arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
      Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

Acrobat 9 - Batch Create Multiple Files

Hopefully someone can help me with this problem, or at least shed some light on it for me.
I am using Acrobat 9. I have Creative Suite 4 (InDesign, Illustrator, Photoshop, etc.) There is a new feature in Acrobat 9 called "Batch Create Multiple Files", which can be found in the File menu, under "Create PDF".
This feature is supposed to create pdfs from multiple native file types, including InDesign. Acrobat uses the native application, in this case InDesign CS4, to open each file selected in the batch and then create a pdf file from it. This would be a really cool feature if I could get it to work.
Each time I try to run this, I get an error message stating "Cannot open the document". I have an operator who can get this to work, if they use CS3 InDesign documents (she also has CS3 installed on her mac), which doesn't make sense to me because Acrobat 9 is a part of CS4.
Is it possible that I am missing a plug-in? Has anyone experienced a similar problem, or does anyone have a solution for me?
Thanks,
Jeff

You should remember that Acrobat 9 Pro came out BEFORE InDesign CS4. It has not yet had an update. The release InDesign CS4 format DID NOT EXIST when Acrobat 9 Pro came out, so it cannot yet convert it.
You'll have to wait for an update to Acrobat 9 Pro.

Combine functionality Batch Create Multiple files and Set Security

Greetings,
Is there any way to combine the functionality of Acrobat Pro’s “Batch Create Multiple Files” (File (drop down) -> Create PDF -> Batch Create Multiple Files…) and running a batch process (Advanced -> Document Processing -> Batch Processing -> Batch Sequences -> Set Security)?
Ideally I’d like to either:
1) Add the “Set Security” batch process to the “Batch Create Multiple Files … command located under the File (drop down) -> Create PDF
or
2) Be able to create a batch process that first allows me to select the documents (Word, Excel, etc.) I want to convert into PDF files, then converts them, then runs the Set Security batch process.
Right now it isn’t too much trouble to first “Create Multiple Files…” then run the batch process Set Security, but it would be nice to be able to do both with a single command.
Any suggestions?
Thank you,
TPK

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

Changing the pdf profile of batch create multiple files in Acrobat?

Is it possible to load another pdf profile for batch create multiple files from Acrobat? I am batching indesign pages and I need to use a high resolution pdf profile with printer marks
The default seems to be low res rgb. Any idea if this can be done?

it is a custom Pdf Profile but basically an X1a with a few tweeks, When I try a watch folder with distiller it just errors out all the files.
Batch Processing using the "Create PDF, Batch Create Multiple Files " in Acrobat works but does not let me choose a pdf profile.
C

Batch create Multiple files in Acrobat X and X1 cannot convert Word 2010 with graphics

I work for an exams board where hundreds of exam papers are produced. Once approved, these exams are converted to PDF and sent to print. Using the Batch Create Multiple Files option is therefore essential to getting these papers print ready on time. We have found that using this function to convert multiple Word 2010 files with graphics will not render it properly. It deconstructs the graphics which loses the integrity of the exam paper.
I have trialled the same group of files on Acrobat X1 with the same result.
Have other Acrobat Pro Users experienced the same problem? Is there a fix?

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Batch create multiple files in a script

I have 130,000 gif files I want to convert to pdf. I can only batch convert about 1,500 at a time, acrobat will bomb out if I do more. Is there a script I can use to process all my files ?
Thanks,
Alex

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

JDBC to File Sender: Create Multiple Files

Hi All,
I have a requirement that I have to pick data form a SQL table and then based on the data in it I have to create multiple files using File receiver. Even the file name has to be derived from the data in the SQL table.
e.g. The SELECT statement is fetchin 30 record and I have to make 3 files out iof it. Please suggest.
regards,
Piyush

Hi,
You can achieve without BPM, By using Enhance Interface Determination i,e Multimapping without BPM.
In additon you would required ASMA and dynamic configuration for this scenario.
Regards,
Abid

Creating Multiple Files with different name at Receiver side

Gurus -
Can anybd tell me how to generate multiple files at the Receiver side in the given target directory with different file names?
One source message will contain number "N" using which we have to generate files "N" number of times at the Receiver side.
Kindly help.

hi,
are you following this blog?
provided you have SP>14 and no IDOC/HTTP involved.
and have you got the error you mentioned when testing with sample payload?
from where did you take the payload? if is from SXMB_MONI make sure you dont have <MESSAGE> tags in the payload,generally systems adds <MESSAGE> tags when you do multi mapping.
get the payload from SXMB_MONI right click ->view source payload(this is raw data) and test it.
it should be ok now.
and refer my discussion in the thread ,as I got he same error.
Split mapping created no messages -Mluti Mapping

Using a for loop to create multiple files ???

I have the below code. I want to make a file for every element stored in the array. How do I do this?
Vector files = new Vector();
for (int i = 0; i<files.size(); i++)
//System.out.println(files.elementAt(i));
}

Not much. Are the files being created by processes on multiple hosts? If not, adding the host name and IP seem useless. Are the files being created by multiple processes and/or multiple threads on same host? If so, then the former isn't helpful. Is it possible for two threads or processes to create a file in the same millisecond - if not IMPOSSIBLE then it is possible and 99.99% chance that they won't isn't good enough. If so, then that won't work either. What if a single thread quickly creates two files in same millisecond - remember the millisecond value may not change for several milliseconds due to host system architecture.
So, I guess it depends on your requirements.

8.9 ACH Paycycle -- possible to create multiple files?

We currently have multiple business units set up to create ACH payments (for example 5 paycycles). Each of these paycycles is run separately as the business units all contain either a different Bank Numbers or a different Account Numbers from the same bank. Here is an example:
Bank 1:
Paycycle 1 - Account 1
Paycycle 2 - Account 2
Paycycle 3 - Account 3
Bank 2:
Paycycle 4 - Account 4
Bank 3:
Paycycle 5 - Account 5
We are currently looking to see if we should try to combine all of the paycycles into one so the user only has to run one paycycle daily. However, we would need 5 separate files written out of the Paycycle.
Has anyone done this before? Is it possible with minimal customizations? or will it be a lot of customizations?
Thanks!
Jennifer

Jennifer,
usually payment files are generated based on the bank,bank account and payment method combination. In your case you should be able to create 5 files for 5 different bank accounts even after combining everything into one paycycle.
Try this and let me know if you face any issues.
Regards,
DevD

Create multiple files in different directories for receiver system

Hi,
My scenario is File-XI-File. Based on a value of a field(1...Unbounded) & its occurance in source file XI needs to create same file number of times(based on occurance of field in source file) in different directories on receiver system(Single Business System).
What different ways/solutions are available to achieve this?
Regards,
Bharat
Edited by: Bharat Rathod on Nov 21, 2009 5:24 PM

Hi Bharath,
>>Based on a value of a field(1...Unbounded) & its occurance in source file XI needs to create same file number of times(based on occurance of field in source file) in different directories on receiver system(Single Business System).
This logic needs to be handled in message mapping ... and you need to use multimapping..check the link here
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/content.htm
Regards
Suraj

Saving Movie creates multiple files

Similar Messages

Maybe you are looking for