Saving MPP to SharePoint 2013 site from Project Pro 2013 fails
When syncing from MS Project Pro 2013 to SharePoint 2013 it does not save the MPP file in the Site Assets
Have MS Project Pro 2013, SharePoint 2013, IE 9, Windows 7
The scenario is as follows.
1. Have a SharePoint Project site
2. I open up the task list in the SharePoint site and added tasks just using the available default fields that are provided. NO external links
are in the task list.
3. Selected the Open with MS Project option in the task list ribbon. MS Project 2013 launched from my desktop with the task list opened in it.
4. In Project selected the Sync with SharePoint option and it did sync successfully with task list but it did NOT save the project file in the
SharePoint site. In addition, No error or warning message appeared.
5. Selected Save button in MS Project – again it did not save to SharePoint but instead brought up the Save As screen again.
Karen,
To the best of my knowledge synching a Project file with a SharePoint task list and saving the project file to a library on SharePoint are two separate processes.
You may synch the file to the SP list and then save the Project file to a library. Are you using Project Server?
Similar Messages
-
I cannot create a site-template in my own language (danish) and deploy a site based on the template.
I created a template from a "fresh" SharePoint project site with no tampering.
When trying to deploy a new site based on the templat I get the following error:
In Danish:
Beklager, men noget gik galt
Det blev fundet et navn på en dubletindholdstype "billede".
Tekniske oplysninger
Fejlfinding af problemer med Microsoft SharePoint Foundation.
Korrelations-id: 96646c9c-3213-a088-c6c4-537b0815313c
Dato og klokkeslæt: 21-06-2014 10:23:36
In English:
Sorry, something went wrong
A duplicate content type name "billede" was found.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
Date and Time: 21-06-2014 10:31:35Need details from ULS logs about Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
Check below:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/e955e737-e12e-4afa-b446-bb6e0f05e9b1/duplicated-content-type-error-creating-a-sharepoint-2010-site-from-a-custom-site-template?forum=sharepointgeneralprevious
http://aramacciotti.wordpress.com/2012/04/04/the-case-of-the-duplicated-contenttype/
http://community.office365.com/en-us/f/154/t/69416.aspx
If this helped you resolve your issue, please mark it Answered -
Error while saving record in SharePoint 2013 through jQuery
Dear Support,
I had successfully created provider hosted app and deployed on SharePoint 2013 online site, in my project I created
orderservice.asmx.cs web service and write a code for save record on SharePoint 2013 online list as I mentioned below and calling on App1.js file.
But I am facing error when I am saving record on SharePoint 2013 list on button click event
“500 Internal Server Error
<! DOCTYPE html>”
<html>
OrderService.asmx.cs
Public
int InsertOrder (Order
orderRecord)
pwd.MakeReadOnly();
clientContext.Credentials = new
SharePointOnlineCredentials (myUserName, pwd);
try
Web oWeb = clientContext.Web;
ListCollection lists = oWeb.Lists;
List oOrderlist = lists.GetByTitle("Order");
clientContext.Load<ListCollection>(lists);
clientContext.Load<List>(oOrderlist);
ListItemCreationInformation listItemCreationInfo
= new
ListItemCreationInformation();
var listItem = oOrderlist.AddItem(listItemCreationInfo);
listItem["Title"]
= orderRecord.OrderProfile;
listItem["Special_x0020_Instruction"]
= orderRecord.Instruction;
listItem ["Customer"] = orderRecord.CustomerId;
listItem.Update();
clientContext.ExecuteQuery();
return 1;
catch
return -1;
App1.JS
$("#Save").click(function
debugger;
var OrderProfile = $('#orderprofile').val();
var CustomerId = $('#exCustomerlist').jqxComboBox('getSelectedItem');
var Instruction = $('#instruction').val();
$.ajax ({
url: location.pathname + "OrderService.asmx/InsertOrder",
type: "POST",
dataType: "json",
data: "{OrderProfile:'" + OrderProfile
+ "', CustomerId:'" + CustomerId.value
+ "', Instruction:'" + Instruction
+ "}",
contentType: "application/json; charset=utf-8",
beforeSend: function (XMLHttpRequest) {
//Specifying this header ensures that the results will be returned as JSON.
XMLHttpRequest.setRequestHeader("Accept",
"application/json");
success: function (response) {
$(".errMsg ul").remove();
var myObject = eval('('
+ response.d + ')');
if (myObject > 0) {
alert(myObject);
$(".errMsg").append("<ul><li>Data
saved successfully</li></ul>");
else {
$(".errMsg").append("<ul><li>Opppps
something went wrong.</li></ul>");
$(".errMsg").show("slow");
clear();
error: function (response) {
alert(response.status + ' ' + response.statusText
+ ' ' + response.responseText);
would request for your support.
Regards,
AkhileshHi,
Can you call your web service using jQuery not in an app successfully?
As the error message suggests, it might be an error on the server side.
I suggest you do a simple test to check whether you can call the web service using jQuery.
Here are two links would provide more information about troubleshooting this error for your reference:
http://sadomovalex.blogspot.com/2013/08/return-json-from-asmx-when-call-it.html
http://www.codeproject.com/Tips/761116/Troubleshooting-an-Issue-With-Calling-an-asmx-Web
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support -
Unable to import Thesaurus in SharePoint 2013 - Failed to start the flow
I am having issue with importing Thesaurus into SharePoint 2013. I have tried with seed file on local and remote server without success. On ULS stack, it lists "Cannot start flow. The admin service is unavailable". But if
I retrieve status of search topology, it lists admin components (running on two app server) are active. Any idea how this could be resolved or direction I can head to?
This is what I have tried :
PS C:\Users\user> $sa = Get-SPEnterpriseSearchServiceApplication
PS C:\Users\user> Import-SPEnterpriseSearchThesaurus -SearchApplication $sa -FileName \\server_name\testThesaurus.csv
+ CategoryInfo : ResourceUnavailable: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus],
InvalidOperationException
+ FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
On ULS I get the following entries:
CtsConnection.StartFlow: Failed to start the flow: Microsoft.ThesaurusDeployment. Exception: System.ServiceModel.FaultException: Cannot start flow. The admin service is unavailable. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Ceres.ContentEngine.Services.ContentIntegrationEngine.IContentIntegrationEngineManagementAgent.ExecuteFlow(String name, FlowEvaluationConfig config)
at Microsoft.Ceres.ContentEngine.ComponentClient.CtsConnection.StartFlow(String flowName, IDictionary`2 parameters)
MK SinHi,
Please check if it is related to the primary search host controller, make sure it is enabled for the farm, then check results again.
$searchApp = Get-SPEnterpriseSearchServiceApplication
Get-SPEnterpriseSearchLinguisticComponentsStatus -SearchApplication $searchApp
Get-SPEnterpriseSearchHostcontroller
Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename \\sp\custom_thesaurus.csv
Thanks
Daniel Yang
TechNet Community Support -
Hi we are starting to use sharepoint 2010 / word 2010 and have found an interesting bug/problem. Sometimes when a user tries to save a file (by clicking on the save button in the quick access toolbar for word 2010) the save dialog comes up with the
users local "Documents" folder as the path (not the correct sharepoint path where the document should be saved). (I should say that we are creating the file from sharepoint by using a toolbar on the document library, with the new button)
We are using a content type and a template attached to the document library when we create the file.
This is really annoying because the user might not notice that the document is saving locally and not to sharepoint. I have found a strange workaround which involves clicking the [File] tab on the ribbon in word 2010, then clicking "Save and Send"
and then clicking the save button again. At this point word 2010 seems to "remember" that it is trying to save document to sharepoint and shows the sharepoint document library.
This is a real nuisance which could lead to documents being lost/misfiled if people don't realize that this is happening. Can anyone help me?
Thanks
Kevin
krdSaving files to SharePoint Document Library.
For a test try this:
Word 2010
Disable all options in "Protected View"
(-> Word Backstage -> Options -> Trust Center -> Protected View)
Now you can create a new document in your document library. The
save dialog comes up with the correct sharepoint path.
Hope this helps
DJWGermany -
Evenrt ID 7043 SharePoint 2013–Failed to Load /_ControlTemplates
Dear All
I have probelm when I load the page on CA to check the Review Problem and solution page on Monitoring
It will so error something wrong.
Load control template file /_controltemplates/15/MySuiteLinks.ascx failed: Thread was being aborted.
Whats the problem and how can I fix it
Regards
Joetry these links:
http://expertsharepoint.blogspot.de/search?q=controltemplates#sthash.xMBqSBZR.dpuf
https://social.technet.microsoft.com/forums/sharepoint/en-US/caf048ea-9fe6-4009-b55b-a125351ee644/sharepoint-controltemplate-errors
https://support.microsoft.com/kb/2481844?wa=wsignin1.0
http://www.sharepointtechs.com/event-7043-timeouts-on-web-front-end-server
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing -
Unable to Connect to Project Server 2013 from Project 2013
Hello,
I'm trying to connect to Project Server 2013 from Project 2013 but it is not working.
I'm able to connect to the PWA from IE 10 on Windows 8 Enterprise
On Project 2013, I configured account to connect to Project Server 2013 and I checked the "Log on to Project Server from Project Professional" global permission and it is on.
Any idea why it is not connecting?So you are using Project Online and not Project Server 2013? Can other users access Project Online from Project Pro successfully in your organisation? If it was an authentication issue, Project would prompt for credentials.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Add new document link not working in upgraded sharepoint 2013?
Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
SushilHi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
SharePoint 2013 REST Create "document set" folder
Hi,
Is there a way in rest api model to create a "document set" folder into a Library?
I have already created a folder through this code :
body: { '__metadata': { 'type': 'SP.Folder' }, 'Name': 'New name' }
Do i need to use another namespace ? Or do i add new properties into the body section ?
Regards.Hi,
you could see below a part of my code which works : a CRM's plugin create a document set on a SharePoint online document Library.
I have to use the "/_vti_bin/listdata.svc" instead "_api". Don't forget to add the "Slug" header.
try
Uri spSite = new Uri(https://contoso.sharepoint.com/sites/MySite);
SpoAuthUtility _spo= SpoAuthUtility.Create(spSite, "[email protected]", WebUtility.HtmlEncode("pwd"), false);
var formDigest = _spo.GetRequestDigest();
headers = new Dictionary<string, string>();
headers.Add("X-RequestDigest", formDigest);
headers.Add("Slug","https://contoso.sharepoint.com/sites/MySite/Projects/MyDocSetName|0x0120D520007A233E5B7896684DA77F0B084D0FE117">https://contoso.sharepoint.com/sites/MySite/Projects/MyDocSetName|0x0120D520007A233E5B7896684DA77F0B084D0FE117");
restQuery = "/_vti_bin/listdata.svc/Projects";
url = new Uri(String.Format("{0}/{1}", _spo.SiteUrl, restQuery));
byte[] data = System.Text.Encoding.UTF8.GetBytes("");
// Send a json odata request to SPO rest services byte[] result = HttpHelper.SendODataJsonRequest(
url,
"POST", // reading data from SP through the rest api
data,
(HttpWebRequest)HttpWebRequest.Create(url),
_spo, // pass in the helper object
headers
catch (FaultException<OrganizationServiceFault> ex)
throw new InvalidPluginExecutionException(ex.Message.ToString());
Regards.
Gilles Martinez
Twitter
Blog
Please mark as helpful/answer if this resolved your post -
Project Server and Project Pro 2013 - Tasks not allowing Uncomplete Work to be rescheduled
We are current;y running Project Server 2013 on Premise and using timesheets to update task status. We are using the proactive task scheduling to let the allocations, work and dependencies drive the schedule to get accurate project finish dates.
We have several projects that give an error stating "Change would modify work entered by a team member" and "We can't make that change because Project Web App is set to only allow actual work to be entered by a team member through Timesheets
or My Work" when setting the status date and Updating the Project and selecting reschedule Uncompleted Work to start after the status date. We have determined that usually it is only a single task causing the error. we have tried to remove the resource
when no actuals have been entered but we get the same issue. Any help would be greatly appreciated.Paul,
Looks like the settings "Only allow task updates via Tasks and Timesheets" has been enabled on your PWA (under Server Settings >> Task Settings and Display).
But the setting is used to prevent any updates to actual work from project pro, and will throw the error you mention above, if a PM tries to update the actual work.
I am not sure why the "Rescheduling of uncompleted work" would thrw this error, but worth checking that setting.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter -
I have an Access 2013 Web App in my Sharepoint 2013 online website. It contains a query to report on its data (several, actually, but let's keep it simple). I want to connect an Excel spreadsheet to the query, visualise the data in pivot tables/graphs/whatever,
save the spreadsheet in a Document Library, and let other team site Sharepoint users open the spreadsheet (preferably in Excel online, but with Excel client if it has to be) and see/copy the data, refreshed with the latest information from the Access Web App.
Simple, surely!
The way I'm doing it at the moment is to create an ODC file to connect to the cloud-based Access 2013 database, save that ODC in a Data Connection Library in the SP site, and use the saved ODC file as data source in the Excel spreadsheet. This works and
successfully keeps everything 'in the cloud' but I can't get it to refresh in Excel Online, and if I open the spreadsheet in Excel Client I have to enter the database password every time to refresh it. I don't really want to issue this password to everyone
who might want to view the data. There must be a better way than this ODC method, I suspect.
Googlings on this have led down various blind alleys - Excel Services, PowerPivots, Web Parts - but I'm stuck on which to follow through. Please, someone, point me to an article/book/website that explains how to do this step-by-step in simple language..
thanks
JonathanI don't see any quick way of achieving it - at least there's no such functionality exists in SharePoint. All you can do, develop an event receiver that will update the fields in the list item once the excel file is added/updated. You can use OpenXml API
to manipulate the excel file.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com -
Saving/Opening documents to SharePoint 2013 from within Office 2010 applications
I was hoping that Office 2010 would work nicely together in terms of saving to and opening documents from SharePoint 2013. Alas, I was disappointed and somewhat surprised to see that opening/saving documents in SharePoint from within Office still
involves copying, pasting and hacking the URL of the document library in the Save or Open dialogue box. I was fully expecting that Office 2010 would have display some sort of SharePoint navigation so you could view your sites and document libraries in a similar
way to folders. A mature document management system this ain't!
Anyone have any advice on how to improve the Open/Save to/from SharePoint experience in Office 2010? I'm open to the idea of Office add-ins whether third party or official Microsoft.
Thanks in advanceThanks for the reply, but that's from within SharePoint, not Office?
An example scenario: I create a new document or receive a document, I'm in the document, and I want to publish the document to a document library in SharePoint. At the moment I would have to save the document, load up SharePoint, navigate to the document
library and then go through the upload process.
I should really be able to, from within Word, select File - Save to SharePoint (say) and then be able to navigate to the document library I want to publish to. Really basic DMS stuff that I'm surprised isn't there!
Similar thing to opening a document. I should be able to Open from SharePoint, navigate to the document library via some sort of navigation box, and open it.
Thoughts appreciated. -
Add a list from a subsite to the top level site SharePoint 2013
Hello, I am trying to display a calendar from sub site to the top level home page and cannot seem to make it happen. I have opened the calendar in SPD and saved that as a webpart file to my desktop and then uploaded into the app gallery and web
part list and when I go to add it to the top level home page I get the following error: 'List does not exist' 'The page you selected contains a list that does not exist. It may have been deleted by another user." Any idea?
I am running 0365 w/SharePoint 2013.
Thank you!
Hi,
Please perform the steps below:
Access calendar list in subsite, in the Customize List tab, click Edit List. It will open SharePoint Designer.
In Views tab, click Calendar, it will open list view in Advanced mode, and you will see code.
Delete the part between <ZoneTemplate> and </ZoneTemplate>
click INSERT in the toolbar > DataView > click calendar list > List View Tools bar appears in green color.
Click WEB PART, save web part to site gallery (ensure you have site-level admin permission)
Access root-site, insert web part to page, the web part is in Miscellaneous category.
For clearly:
Regards,
Rebecca Tu
TechNet Community Support -
Can't checkout Project files from SharePoint 2013
I have library with 'require checkout' set that contains mpp files. I have MS Project 2013 (SP1) installed locally.
If I choose edit for one of the mpp files, it simply opens in MS project as read-only and doesn't allow me to save it (only as a local copy). There's no option to check-out anywhere. Obviously I can check-out manually in SP before opening then check in again
afterward but it seems clearly wrong that I'm allowed to click "Edit", make changes, but then be unable to save back to SP again (even if you switch back to SP to check-out, Project still thinks you've opened it Read Only and won't let you save back
to SP).
What am I missing?Hi Dylan,
Didn't you have this message just above the ribbon in MS Project 2013?
Using Project Server 2013, MS Project by default opens projects in read-only mode, the user having to intentionnally click on the "check-out" button to check it out. That being said, I'm not sure if the behavior is the same with a project plan opened from
a SharePoint librairy but it is worth checking this point.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |
Maybe you are looking for
-
How to put KF's and Char's in order
Hi, As per requirement i need to show the Char's and KF's in the below order. 1. Sales Org 2. Sold-to party 3. Bill-to party 4. Cust PO Nbr 5. Sales Document
-
How to force HTML5 video?
hey, I did a clean install of Yosemite on my mid-2010 MBP 13, and one of the supposed things that was supposed to come of Yosemite (and Safari) was HTML5 video playback. 1) I have "prefer HTML5 playback" set w/Netflix, but, it still demands me to dow
-
How to use any cell as an static value
Hello, I don't know if it is possible to use any cell as an static value, same as $ in excel, E$2$. I need to divide all the values of a table with a unique value of a cell. In excel is when you put $E$2, this make a cell an static value. This is pos
-
Best practice for BW transport
Hi . When i am working on BW Object transport from BW development system to BW QAS(TEST) system, there are two methods to activate the standard BCT object, (1) Activate it in QAS system directly, (2) tranport it from DEV to QAS. Can anyone tell m
-
Running a db2 command from Java Application ??
Hi All, I have to write an application in JDBC that can retrieve a list of databases on a db2 server, the only way I know is the db2 command "list database directory", but I can not use it in a JAVA program, is there a solution for this? Can anyone h