Saving Multiple Attachments in iOS mail

I've run into a few problems / issues, searched the forums for a solution, and will turn my ignorance over to the internet....
Three problems, First is an inability to save multiple attachments in mail - be in to DropBox, Adobe Reader, FileManager, whatever....
I end up switching back and forth between Mail and whatever program I'm saving to by holding my finger on each file, saving to whatever program, and then jumping back.
This brings me to my second problem: when I jump back to the email thread it doens't go back to that same message, it either goes to the next unread message in the thread or to the top (most recent message) in the thread. Six attachments in a message in the middle of a 13 message thread and I've got to tap 30-something times to get the job done. Seems there should be a single "Save All To..." botton somewhere.
Third (and last): is there a way to see attachmentas, and how many, whithout having to scroll down through 13 messages and all associated replies in the thread to get to the bottom of the message and see the attachments? Annoying.

Suresh,
just copy your question and paste it in search box.. press enter
there are too many posts already on this.
still a little help for you, with explanation:
[code snipet with documentation|http://wiki.sdn.sap.com/wiki/display/Snippets/MultipleAttachmentsExplanation]

Similar Messages

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

How to handle multiple attachments in XI mail sender adapter?

Hi,
is it possible to handle multiple attachments in a mail receiving in XI?
Our customer wants to send us mails with multiple attachments and we have to convert each attachment to an idoc.
But as I know XI (receiving mails) can handle only a single attachment in a mail. Is it true?
Any ideas?
Thanks a lot!
Regards
Wolfgang

Hi Wolfgang,
Well, although I have never tried a scenario of picking more than two attachments from one mail, I wonder if its possible in the first place!
Here are the reasons why I think it is possible:-
It is not mentioned anywhere in the SAP Notes for mail adapter that it is not possible.
*It is not mentioned anywhere in the SAP help documentation that it is not possible
*Also, I think if the receiver mail adapter can create more than one attachment, the sender should be able to pick more than one!:)
Have you tried defining a PayloadSwapBean module to pick up more than one attachment?
Just try experimenting with this particular part of the module code:-
Content-Disposition: attachment;filename="MailAttachment-1.xml"
Content-Description: MailAttachment-1
I think even the following weblog might be able to help you to a certain extent:-
"Receiving E-Mail and processing it with ABAP - Version 610 and Higher" - /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
Regards,
Sushumna
Regards,
Sushumna

How to handle Multiple attachments in sender Mail Adapter

Hi,
In our requirement is mutiple documents send through mail adapter, In custom java module we read the each document details and do it bussiness process. But now i am not able to read the multiple files at a time. we are able to read single file only. So plz give the solution for that.
1) How to send multiple attachments(like word, PDF, JPG etc..) using mail apapter.
2) How to read multiple attachments in custom java module.
Thanks & Regards
Vijay

Hi Vijay,
Go through this weblog this explains steps to multile attachments.
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Ashwin.

How can we send multiple attachments in a mail from iPad 2

Hi,
I am using a ipad2. I want to know how we can send multiple attachments through mail from iPad. I did not find any option of doing this. Is there a way to do this.
Regards,
Satyabrat

You can't do it natively on the iPad (unless you just want to send up to 5 photos from the Photos app). I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.

How to save multiple attachments in Lion Mail?

In Snow Leopard Mail, I can save multiple attachments to my Downloads folder with one click. In Lion Mail, I see no way to save attachments except by right-clicking on them one at a time. I must be missing something. Information appreciated.

I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.

How to send multiple attachments with the mail in jsp

hi.I wrote a code to send mail.but i need to send mail with multiple attachments.when i run this code iam able to send message but not files.i want to send files as attachments with the message.please help me.
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
String Attachfiles1="";
String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
try
String subject="",from="",url = null,to="";
String mailhost = "localhost";
Properties props = System.getProperties();
String msg_txt="";
String strStatus="";
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
<form action="Composemail.jsp" method="post">
<b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>��<input type="text" name="to" size="72"><br>
<b>From :</b>��<input type="text" name="from" size="72"><br>
<b>Subject :</b>��<input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
��<textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname3" value="filename" size="50"><br><br>
��<input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>

Most likely you're not specifying the path of a file on the server machine.

Iam unable to send multiple attachments with a mail using JavaMail?

Hai to all,
Iam unable to send multiple attachments with a email,see
iam have succeeded in sending one attachment with a email.
when iam tring to add two or more attachments to a mail,
it is giving a Exception like this:
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: No content
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:577)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at AttachFilesModified.sendMail(AttachFilesModified.java:185)
at AttachFilesModified.main(AttachFilesModified.java:43)
this is my code snipnet:
BodyPart messageBodyPart = new MimeBodyPart();
Multipart multipart = new MimeMultipart();
if(body != null)
messageBodyPart.setText(body);
multipart.addBodyPart(messageBodyPart);
/*if(attachments != null)
for(int i = 0; i < attachments.length; i++)
String filename="D:\\nagaraju\\apachi\\axis-bin-1_3.zip";
     //String s[]=filename.split("\\");
     //System.out.println(s);
          //String s1=s[1];
          //String filename1=s[s.length-1];
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filename);
     messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(filename);
multipart.addBodyPart(messageBodyPart);
     //second file attaching
     /*String filename1="C:\\nagadoc.txt";
     BodyPart messageBodyPart1=new MimeBodyPart();
     DataSource source1=new FileDataSource(filename1);
     messageBodyPart.setDataHandler(new DataHandler(source1));
     messageBodyPart.setFileName(filename1);
     multipart.addBodyPart(messageBodyPart1);
mess.setContent(multipart);
Address[] allRecips = mess.getAllRecipients();
if(toStdOut)
System.out.println("done.");
//System.out.println("Sending message (\"" + mess.getSubject().substring(0,10) + "...\") to :");
System.out.println("Sending message................");
for(int i = 0; i < allRecips.length; i++)
System.out.print(allRecips[i] + ";");
System.out.println("...");
Transport.send(mess);
if(toStdOut)
System.out.println("done.");
return 0;
What's wrng with that code snipnet?
Nagaraju G.

This works fine with me, try it or compare it if you want.
public void sendEmail( String from, String to,
String subject, String body) {
fMailServerConfig.put("mail.smtp.host", " <<mail server>>");
Session session = Session.getDefaultInstance( fMailServerConfig, null );
MimeMessage message = new MimeMessage( session );
try {
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject( subject);
message.setText( body);
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
}catch (MessagingException e){
System.err.println("Cant send mail. " + e);
The error on your code might be:
BodyPart messageBodyPart1=new MimeBodyPart();
DataSource source1=new FileDataSource(filename1);
messageBodyPart.setDataHandler(new DataHandler(source1));
messageBodyPart.setFileName(filename1);
multipart.addBodyPart(messageBodyPart1);
You don't need to create a new BodyPart, and apart from that you'r seting values on "messageBodyPart" but adding "messageBodyPart1" to your multipart :P
Well see u and have a good one!
p.s. i know it's a little late from the day you posted, but at least it might help somebody else :D .

Multiple attachments in single mail using XML publisher bursting

Hi all
I am sending the PDF generated to a particular mail recipient using the bursting options.
There is requirement in which I have to attach two different PDF's to the mail. These multiple attachments should go in a single mail. Please let me know how we can achieve this.
Thanks in adv,
Srini
Edited by: 796646 on Mar 4, 2011 2:35 PM

Suresh,
just copy your question and paste it in search box.. press enter
there are too many posts already on this.
still a little help for you, with explanation:
[code snipet with documentation|http://wiki.sdn.sap.com/wiki/display/Snippets/MultipleAttachmentsExplanation]

Multiple attachments in a mail

Hi All,
How to send multiple attachments in a single mail?
am using 'SO_DOCUMENT_SEND_API1'.
is it possible to send multiple attachmentsi in a single mail using the above FM....
Regards,
Suresh.d

Suresh,
just copy your question and paste it in search box.. press enter
there are too many posts already on this.
still a little help for you, with explanation:
[code snipet with documentation|http://wiki.sdn.sap.com/wiki/display/Snippets/MultipleAttachmentsExplanation]

How to attach Multiple attachments to single mail

How to attach multiple pdfs to single mail ?
or
how to attach one pdf & One excel & One word document to single mail ?
Thanks In Advance

Hello Karunya,
Please refer to the link below.
https://wiki.sdn.sap.com/wiki/display/Snippets/Send%20email%20with%20multiple%20zipped%20attachments
Regards,
P Bansal

Does anyone know how to download multiple attachments in icloud mail?

Have tried looking for an answer for this for a long time, but it seems its not possible. Or am I wrong?

The problem with mail is it uses a huge amount of broadband. Also takes up a lot of disk space. Thats why I use icloud mail. On both my imac and laptop I would be using double the broadband.
Sounds like there is no way to download several attachments at once on icloud mail?

Query related to multiple attachments in mail adapter

Hi,
I have a query related to multiple attachments in receiver mail adapter.
I have successfully configured mail related scenarios but now I have another requirement in which I have multiple source files in one directory and I want to send one mail for multiple files as mail attachment using receiver mail adapter. Can anybody help me how to achieve multiple attachments in reciever mail adapter.
To clarify the requirement more let us take an example
Ex: I have 5 input files in the source which I pick up using additional files option in the sender file adapter, now I want to send those 5 files into one mail with 5 attachments. Can anybody explain how 5 different payload will be sent as multiple attachments in one mail.
For your information I used, options like "keep attachments" , some parameters in module processesors etcs...but not able to find out as how exactly it will be achieved.......I dont want to use BPM collect pattern for this.....
Need your help on this issue. Please suggest the solution as how it can be achieved using receiver mail adapter.
Thanks & Regards
Prabhat

Hi,
I resolved the issue on my own. Thanks for your help and support.
Thanks & Regards
Prabhat

Multiple attachment in sender mail adapter with PI 7.11

Hello all,
I've got a scenario MAIL -> PI -> MAIL.
In my sender adapter mail, i have two attachment.
From what i've saw on different thread, it wasn't possible to handle this case in standard with PI 7.0.
Is it possible now with PI 7.11 ? Or must i develop a specific module for that ?
Thank you.

Hi Jean ,
I got the same issue too, the Scenario is MAIL ->FILE . Mail Sender Adapter picks up the 1 PDF attachment and saves in network folder successfully but not multiple attachments of a mail.
These are the setting in Module configuration I made:
1. The IMAPS was used in Mail Sender Adapter : imaps://10.192.101.16:993/Inbox
*IP address of the Mail Server was got from the Admin )
2. Ports : 143, 993 are opened for the Mail Server to access for XI SERver ( Raised an Ticket to open Ports of Mail server :NZTxxx.dknz.nzcorp.net)
3. As the attachment was only in PDF : Added swapbean in Module tab as below :
Process Sequesnce :
-Make sure: AF_Modules/PayloadSwapBean Modul key : TRANSFORM is added before sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
-And under Module Configuration select : TRANSFORM as Module Key and add >
swap.keyName Content-Disposition
swap.keyName Content-Description
swap.keyValue attachment;filename='MailAttachment-1.pdf"
swap.keyValue MailAttachment-1
-IF you get to know how to fetch multiple attachment , Please update.
Thanks,
Vara

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path      LIKE rlgrap OCCURS 0 WITH HEADER LINE,
        lt_index    TYPE sy-tabix,
        doc_type(3) TYPE c,
        descr       LIKE it_objpack_basis-obj_descr,
        temp_data   LIKE w_path,
        temp1       TYPE string,
        tab_lines   TYPE i,
        langu(15)   TYPE c,
        expirydate TYPE so_obj_edt,
        L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
              'not logged on for 180 days for client' sy-mandt
              INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
   ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num   = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num   = w_tab_line.
it_objpack_basis-doc_type   = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
    temp1 = w_path.
    descr = w_path.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '\'
        string    = descr
      IMPORTING
        head      = descr
        tail      = temp_data.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '.'
        string    = descr
      IMPORTING
        head      = temp_data
        tail      = doc_type.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename      = temp1
        filetype      = 'BIN'
        header_length = 0
        read_by_line = 'X'
        replacement   = '#'
      TABLES
        data_tab      = it_upload.
    DESCRIBE TABLE it_upload LINES tab_lines.
    DESCRIBE TABLE it_objbin_basis LINES lt_index.
    lt_index = lt_index + 1.
    LOOP AT it_upload.
      wa_objbin_basis-line = it_upload-line.
      APPEND wa_objbin_basis TO it_objbin_basis.
      CLEAR wa_objbin_basis.
    ENDLOOP.
    it_objpack_basis-transf_bin = 'X'.
    it_objpack_basis-head_start = 0.
    it_objpack_basis-head_num   = 0.
    it_objpack_basis-body_start = lt_index.
    it_objpack_basis-body_num   = tab_lines.
    it_objpack_basis-doc_type   = doc_type.
    it_objpack_basis-obj_descr = descr.
    it_objpack_basis-doc_size   = tab_lines * 255.
    APPEND it_objpack_basis.
    CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack_basis
      contents_txt               = it_objtxt_basis
      contents_bin               = it_objbin_basis
      receivers                  = it_reclist_basis
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc EQ 0.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM.                    " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji

Saving Multiple Attachments in iOS mail

Similar Messages

Maybe you are looking for