Saving multiple track information in midi format 0

In order to play sequences on my new yamaha S90 ES, I need to save my sequences as format 0 on a USB disk. Format 0 only allows one region. How do you take a song that you've set up on different regions and dumb them down to one, while retaining the separate midi track information?

I struggled with the same problem, but I think I've managed to come up with a solution. First, the steps explained in the online LE Reference manual are helpful. Search MIDI File 0 (I think the page is around 60). After performing the neccessary steps explained in the Reference manual you need to merge all of your midi tracks down to one track (region). VERY IMPORTANT do not merge them to one of the preset (pre-existing) midi or general midi tracks. If you do this, all the information just plays on one S90ES track - you get midi mush. You need to merge your tracks to an open (neutral?) track. I used the one labeled NO OUTPUT. I drag one midi track to the no output track and then merge any others to that track. I have found that the tracks only seem to merge "up". I drag the NO OUTPUT track to the top of the midi tracks that way they all merge to that track. At this point you should be able to export to your USB drive and the S90 ES should read it as separate tracks. It worked for me anyway. Good Luck!

Similar Messages

  • TS1468 Why can't I edit album track information in the INFO window, and more to the next track without having to do each track seperate?

    In iTunes 10, I could edit multiple track information in the (Info) tab and click to move to the next track within that album. Now with iTunes 11.1.3.8, I have to do each track seperate. It will not let me edit track information (as if track numbering), and click next to move to another track within the same album. It's a pain to have to do each song , and then click on the next song I want to edit. My music library is 171 GB (47,185 files & 19,498 folders). I can find the Duplicate files, but I can't edit like I use to in iTunes 10. Any help in this matter would be greatly appreicated!!!!! I will be an old man at the rate I'm going now.

    Either select a single track, Get Info, then use the Next/Previous buttons to move between them, or select multiple tracks, Get Info, and edit common properties. The next and previous buttons do not appear in multi-track Get Info (and never have).
    Regarding duplicates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • Unable to update iTunes track information

    So I recently got an iPod, and I decided to take my existing MP3's I have ripped over the years from my CD's and import them into iTunes and get my iPod loaded up.
    Upon doing this, everything worked fine... I dragged and dropped my MP3's straight onto iTunes and let it sit for a few hours.
    Now I'm trying to go in and fill in some missing/incorrect information on my files (add track info, number of discs in album, etc.) and I find that I am not able to on my older MP3's.
    The MP3's say according to iTunes that they are version 2.3 of the ID3 tag. When I try to change one or multiple track information, it just simply doesn't change after I click OK.
    I also noticed that I can't convert my ID3 tags when I choose the option. I get the message "Could not convert ID3 tags for all of the selected songs. The song may be write-protected or of the wrong type."
    From what I can surmise, all of the MP3's I ripped a long, long time ago with MusicMatch are giving me the problem. I haven't used that program in ages. I was able to change song info with a rip of a CD which I believe was done by Windows Media Player.
    How can I get these MP3's to work so I can change the song information in iTunes without going back through all my CD's and rerip them directly into iTunes? That would be a huge pain.
    Thanks.
    Andre

    You'll want to right click on your "iTunes Music" folder (My Music\iTunes\iTunes Library\iTunes Music) and choose Properties. Once XP/Vista shows the property window, at the bottom of that window in the Attributes section. You want to clear out any checkmark or grayness in that and it will go through your music files and clear your read only attribute.
    If that doesn't work, you'll want to look at the Security tab in that same box and make sure that the user you are logged in as has "modify" rights to the music files.
    Andre

  • PBR Multiple Tracking Support information for Cat2960

                      Hello
    I have been investigating for PBR multiple tracking support devices specially Catalyst 2960.
    The following is very similar to this information. However it can not be applicable to Cat2960.
    [PBR Support for Multiple Tracking Options]
    http://www.cisco.com/en/US/docs/ios/iproute_pi/configuration/guide/iri_prb_mult_track_external_docbase_0900e4b1810fe379_4container_external_docbase_0900e4b181525fed.html#wp1056119
    But feature navigator can show the following information of this feature.
    [Feature Navigator for Cat2960]
    PBR Support for Multiple Tracking Options
    IOS:12.2(55)SE1
    Feature-Set:LAB-Base
    You can find it by using the research feature and filter by PBR.
    So which is correct ?
    Basically Cat2960 can not support PBR or there is any related information based on the feature navigator's info.
    Any information would be very helpful.
    Thank you very much and Best Regards,
    Masanobu Hiyoshi

    Hello Julio
    Thank you for your precious information!
    In my understanding it is conclution that the Catalyst 2960 & 2960S series
    basically do not support for PBR. So PBR multiple tracking also do not support right?
    Here is the output of Cat2960 and 3750X
    2960#sh sdm prefer
    The current template is "lanbase-routing" template.
    The selected template optimizes the resources in
    the switch to support this level of features for
    0 routed interfaces and 255 VLANs.
      number of unicast mac addresses:                        4K
      number of IPv4 IGMP groups + multicast routes:    0.25K
      number of IPv4 unicast routes:                              4.25K
        number of directly-connected IPv4 hosts:             4K
        number of indirect IPv4 routes:                            0.25K
      number of IPv6 multicast groups:                           0.375k
      number of directly-connected IPv6 addresses:        0.75K
      number of indirect IPv6 unicast routes:                  0.5K
      number of IPv4 policy based routing aces:             0
      number of IPv4/MAC qos aces:                            0.125k
      number of IPv4/MAC security aces:                      0.375k
      number of IPv6 policy based routing aces:             0
      number of IPv6 qos aces:                                     0.375k
      number of IPv6 security aces:                              127
    [3750X]
    As you know by default Cat3750X normally requires SDM template as routing for
    functioning PBR. Otherwise the number of IPv4 policy based routing aces
    does not increase.
    3750X(config-if)#ip policy route-map PBR
    Mar 30 01:34:21.869: %PLATFORM_PBR-4-SDM_MISMATCH: PBR requires sdm template routing
    3750X#sh sdm prefer
    The current template is "desktop routing" template.
    The selected template optimizes the resources in
    the switch to support this level of features for
    8 routed interfaces and 1024 VLANs.
      number of unicast mac addresses:                       3K
      number of IPv4 IGMP groups + multicast routes:    1K
      number of IPv4 unicast routes:                             10.875k
        number of directly-connected IPv4 hosts:           3K
        number of indirect IPv4 routes:                          7.875k
      number of IPv6 multicast groups:                        64
      number of directly-connected IPv6 addresses:      0
      number of indirect IPv6 unicast routes:                32
      number of IPv4 policy based routing aces:          0.5K
      number of IPv4/MAC qos aces:                          0.375k
      number of IPv4/MAC security aces:                   0.875k
      number of IPv6 policy based routing aces:          0
      number of IPv6 qos aces:                                  0
      number of IPv6 security aces:                           58
    So what could you think about the feature navigator's information related to this?
    Is it possible to modify it? or request to cisco for this?
    Best Regards,
    Masanobu Hiyoshi

  • Premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

    premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

    Hello Ashraf,
    Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
    Thanks,
    Kevin

  • X-Fi Platinum Multiple track record

    ??I have been doing a little reading on the forum for multiple track recording but I could not find anything specific enough for what i need. I have a Fostex digital recorder and i would like to either send out the multiple tracks of say a drum recording to multiple tracks on Majix Music Studio ten. I have been playing around with it but i cant find exactly what I need. Ideally I would like to use the ADAT format from a digital optical cable to bring in the individual wave files directly to the computer. But if?can find a better way or if sombody knows of a fairly inexpensi've digital mixer with at least 6 channels (any input preferably XLR). Also my recorder has SPDIF but only in a two track format. It also has MIDI outputs and inputs but so far I dont think I can use that?for controling my software and sending in multiple tracks. I know my program can do ASIO and WDM. But I dont know what inputs are assigned to what numbers. If any body can awnser any one of these questions please post. ASIO sounds great but how do I identify the track numbers to what input and can i input all the tracks from a digital input?Comp info:?Windows

    W/ ASIO, you can record from as many sources as you get listed/selected separetley in ASIO input port list (meaning those w/ names like Line-In, S/PDIF-In, Mic-In, Aux-In since, there are many of those ports meant for internal routings (W-U-H)). I don't know if you can use S/PDIF and analog inputs simultaenously. Here are some detailed information for Creative ASIO drivers (for Audigy cards but ...) - http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
    I think that Fostex is not very usable for you if you don't build a ADAT system over it. If you have the ADAT option in Fostex already available there and you can get 8 separate channels out from Fostex through it then you could get a soundcard which supports ADAT I/O (something like E-MU 22m ($99 atm.)) and record through Fostex into PC (though, A/D conversion quality Fostex does is propably not very good). Maybe you need more mic-preamps to record drums then too.
    jutapaMessage Edited by jutapa on 0-5-200708:32 PM

  • How to show individual track information (like in the old iTunes) of a single artist (or that artist's album) without all the noise of every single other artist close in the alphabet?

    The new iTunes has truly added extra visual noise.
    I am trying to view a single Artist and the individual track information of that artist.  This used to be how itunes was, you could click on a single artist and then the tracks would all have their various categories.
    I can still see this but only in the "songs" category and in that I have to see every single song or artist alphabetically.
    How do I simply see the artist, and that artist's tracks, as well as the different info about that track I want to see, such as "name, track #, time, year, genre, bit rate, kind, etc."
    Please don't counsel me on what information I need to see, or suggest that I stop caring about this, or ask me why I want to see this various info.
    It was simple and accessible in the older version and I would probably stop complaining to all of my friends about the latest version of itunes if I can see this old format.
    Or... is there a way to re-download the old version?  It's okay that you've made mistakes, every company makes mistakes, if I can revert to the old version that would be great.
    Thank you.

    Select the Songs tab, then under iTunes Menu select View then click Show Column Browser. You will see the familiar GENRES ARTISTS ALBUMS header, click on one artist and you will have only the artist's albums and songs showing in the window below with all the specific info you selected under View options. If this is not what you wanted, simply reply with a nice "no thanks".
    Search this forum for instructions to reinstall iTunes 10.7, there are quite a few posts explaining the process.

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

    I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

    As isteveus said - for large projects uploading to a server would be best.
    Also I can't seem to just attach a file directly to an email for sending purposes.
    But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
    But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
    If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
    Regards
    Léonie

  • Multiple tracks on a single processor

    Hi,
    Whenever I create an audio processor, the number of tracks is always one, that figures that I can only transmit a single codec, like gsm or ulaw. Say, i need a processor with multiple tracks in order to switch codecs dynamically during session. How can it be done? i've tried using ProcessorModel and feed it with multiple audio formats, but it would throw a CannotRealizeProcessor exception all the time. Any ideas?

    I was waiting for someone to give you an answer on this because I'm curious if anyone has been able to do what you described...
    Alas, from the extreme silence I assume nobody has been able to do what you describe. Personally, I think I would create a custom Codec that would incorporate the codecs I wanted to switch between and do it that way. You would have only one track but the codec would have to somehow know when to switch decoding/encoding methods. Presumably a payload change event or other programming event could trigger this. This is somewhat similar to how I've handled DTMF events with Ulaw data in the past.

  • Multiple Item Information - problem

    I updated to iTunes 8. Now, whenever I try to "Get Info" on more than one music file, the content in the "Multiple Item Information" window gets displaced. Please refer to this jpeg to understand what I mean:
    http://img.photobucket.com/albums/v294/mkeopong/iTunesscreen.jpg
    Any ideas why? Any help in resolving this problem would be greatly appreciated. Thanks.

    Actually I meant on the Appearances tab, not the Themes tab.
    You right-click on any blank space on your desktop, choose Properties, then click the Appearance tab.
    Anyway, worth a shot. Sorry to hear it didn't work!
    Sounds like there's some other bugs with itunes v8 needing a certain color resolution setting or else the whole screen is pink.
    In itunes 7, there was a huge bug where users were forced to set their display settings to 1024x768 in order to accept the iTunes license agreement. Nice, huh? Apparently that's fixed - haven't seen posts about that since v8 was released.
    From the screenshots posted on the Get Info for multiple tracks, it looks like more display settings hijinx from iTunes. I changed some stuff on my system, but never got a display like that.
    Message was edited by: Katrina S.

  • How do you get to the "Multiple Item Information" window so I can click "Part of a compilation:?

    How do you get to the "Multiple Item Information" window so I can click "Part of a compilation"?  When I transfer a CD to iTunes, and the CD has ten tracks, it loads as ten different albums.  Also, once this happens, do I have to delete the album and start over or is there a way to merge the albums in iTunes?  Using iTunes 10.04.08.

    And you've made me remember that using the compilation flag may only work in iTunes if you go into the Songs view, then use View > Column Browser > Show Column Browser and then View > Column Browser > Group Compilations to make sure this line is ticked.
    It is also best if View > Column Browser > Use Album Artists is also ticked.
    tt2

  • There is no album artwork in the Multiple items information box for all albums

    I have iTunes 10.0.5 and all my album artwork is present but when i bring up the Multiple item information box by clicking on an album there is no artwork there?
    but there is artwork on the actual album. im wondering if this is why when im uploading music to the internet using FTP transfer the artwork doesnt come up next to the song name. It does with some and with others there is no art.
    All the songs have ID3tags versoin 2.4 and have been converted to a MP3 file but still doesnt work.
    Check this image to understand what i mean more.
    So from the right itunes is showing an album with the album art, in the middle is showing the Multiple items information boc and on the left its showing my FTP with albumart work showing and some not showing?
    PLease can someone help

    *Why is artwork not showing on my iPod when it's there in iTunes?*
    iTunes will display a cover in many of it's views provided at least one track from the album has embedded artwork. The iPod appears to load only the artwork from track one to create the cover flow and album views which means that it can sometimes fail to display art for albums even when you can see the art in iTunes. Further, when tracks are played on the iPod, artwork is displayed if and only if it exisits in the currently playing track, so track one may show art while track two does not.
    *How to find tracks without artwork*
    To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/scripts13.php for Macs. If you're using Google or other FWSE to locate suitable images they should be jpg's and ideally square, 320x320 pixels or above and borderless to give the best results in the various menus. If you have artwork for some tracks of an album, but not others, select a track with artwork, right-click (Option-Click for Macs) on the art & click copy, then select all the tracks of the abum, use CTRL-I or Option-I to *Get Info* and then paste the image into the artwork box.
    *Rebuild artwork cache*
    Sometimes the artwork cache becomes corrupt and fails to show correct artwork, even when this is properly set up in iTunes. To rebuild the artwork cache, connect your iPod to iTunes. Locate the iPod in the Sources pane on the left-hand side, then select the Music tab. Remove the tick from *Display album artwork on your iPod*, sync the iPod, reselect the option & sync again.
    tt2

  • Exporting multiple tracks to EDL

    Hi
    I'm having problems exporting multiple tracks to an EDL.
    The actual project file has come from somewhere else, so I have no idea what could have been set up to make it not work.
    Basically, there are 11 video tracks, each with clips (some of the clips have been disabled, but all the tracks are enabled).
    However, when I go to export/edl, with target video track unchecked, it only exports the lowest track for some reason.

    edl is an old format from the linear edit days. it looks at track1 as being "video" and track2 as being "Key". if you must supply edl duplicate your sequence and flatten layers. if you need to get it to another fcp system use xml. if you're going to another system check out "Automatic Duck"
    http://www.automaticduck.com/products/

  • Breaking up audiobooks into multiple tracks

    I bought an audiobook from itunes that came as only 5 tracks. The book is 11 hours long and it would be really nice to be able to start closer to where I left off on my ipod. does anyone know how to edit mp4s to break them into multiple tracks?

    Is it possible to have each field separated by a comma? Space
    delimiters won't work since not all cities & states are one
    word (ie. New York, New York) however a comma delimiter would allow
    you to use simple list functions to extract the data.
    If this isn't possible but the data is always in the format:
    city<comma>state<space>zip, then you could extract the
    city using comma as the delimiter and then extract the zip code
    using the ListLast() function with space as the delimiter which
    would leave you with the state as the remaining text. This would
    only work however if your data is consistently in the format
    described above.
    Failing this you could build two tables with states and
    cities and then use them to identify valid states and cities and
    extract the data that way.
    cheers

Maybe you are looking for