Saving or Exporting my mix causes tracks to move around

So I was working on a mix last night and had my vocals perfect with the rest of the mix. I even exported it to itunes and it's perfect. Except for the fact that I wanted to lower the volume on one of the vocals, so I go back, lower the volume and save it as another name. I play it back again inside of GB and now the vocals are completely off.
I went through this process several times, starting with my first almost perfect save and each time I resave this as a new name, you can actually see the vocal segment change right before your eyes.
What is happening here? And how do I get it to stop!?

How is it changing right before your eyes? Moving left and right in time? Changing in volume?
If it's moving in time, try clicking on the note next to the timer/measure counter, and set the ruler to quarter notes so the vocal track will snap to quarter note divisions.
If you have the clock clicked, the tracks will not snap to any grid and can slide around easily.
Hope this helps.

Similar Messages

  • Export animation with mp3 track to .mov file...movie sound tinny, hollow with a little reverb. How to fix?

    I'm exporting a 1 minute piece of animation with a great mp3 sound track to a .mov file. The .mov file's sound track is tinny, hollow with some reverb. I've used most high quality quicktime setting and all exports versions were not good. I using FlashCS6 and am on a iMac using OSX 10.9.5. I have also converted the mp3 to a .wav and aiff file and exported both with the animation with the same results. Any help help or workaround to solve this problem would be greatly appreciated. Thanks in advance.

    Thanks for the info Rob. The sound plays fine in Flash. The export settings are: 16-bit stereo 44.100kHz H264. Could the video H264 compression be the problem? Without the H64 compression the video triples in size. Something I'm trying to avoid. I will give no audio compression a try.

  • I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

    I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

    I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list.  It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
    Let's see what we can find.  I may just take it back to the Apple Store.

  • Problem Exporting Master Mix

    STP beginner. I'm trying to export a master mix, but I only want to export a few tracks of a multitrack project. I muted the tracks i don't want in the mix. Some of the tracks I mute are longer than the tracks i want to export but when I export the "master mix" i get the tracks i want, but i also get the "dead" space between the end of my selected tracks and the longer muted tracks.
    Any suggestions?

    Highlight the tracks you want to export by control clicking on them. Do an export, but choose "selected tracks . . ." in the pull down under "master mix". Choose a file type and a name and you're all set. Just the tracks you've selected will export.

  • I searched -- honest:  Audition3 insists I close files before it will export a mix.  Make it stop !!

    How can I make it stop doing this?
    I have maybe ten or 14 tracks in a 3-minute song.  I go to export a mixdown and Adobe says no, it's clogged up, I have to "close files" first.
    Apart from not having a clue what that means, how can a three-minute song made of 10 tracks overload the temp memory which is by the way 256 megs in memory and a whole 80-gig separate dedicated hard drive?
    I mean, sorry if I'm not the polite Adobiite here but what's wrong here?
    E

    Things are not always what they seem but yes this can be very frustrating.
    Are you saying that if you open this session and then try to export a mix (without doing anything else) AA3 still insists on closing files because of temp memory?

  • Saving or exporting a file in CS5 as a CS3 file.

    I have CS5 at home and CS3 at work. Transporting files out of CS5 are not compatible with CS3 and there is no option of either saving or exporting files out of CS5 to/for CS3.
    Help. I had this function in CS4 - this is a huge problem.
    Is there something I am missing?
    Forrest

    ForrestMorgan wrote:
    Is there something I am missing?
    Forrest
    Yes; CS4.
    InDesign has never been able to export to a file readable by any version except itself or the one previous. InDesign CS5 files can be exported as .idml files readable by InDesign CS5 and InDesign CS4. InDesign CS4 is needed to export an .inx file readable by InDEsign CS4 and InDEsign CS3.
    Each version of InDesign introduces features unsupported by the previous version. When you export as .inx or .idml the file must be fully compatible with the current version and all its features as well as as-compatible-as-possible with the previous version. This can get complicated to build into the file format. To ask that the format also support earlier versions is unreasonable. That would require the file to fully support the current version and all its advanced features, as well as save the same data in a way that two or more earlier versions can read, each with their own unique feature lists.
    As well as losing and formatting unsupported by earlier versions when you go through this CS5 > CS4 > CS3 process, you also have a high risk of text reflowing each time you switch from one version to another. It is a terrible way to work. If you must share files between your home computer and your work computer, pick one version of InDesign and use that exclusively. That means either having and using CS3 at work or installing CS5 at home.

  • What is the best way to setup premiere sequence for export when mixing 24fps and 23.976fps for final

    What is the best way to setup a premiere sequence for export when mixing 24fps (CG) and 23.976fps (live action) for final output at 23.976 (vimeo and such).
    Right now my sequence is at 24fps, and when I export to 23.976, my dialogues seem to shift.
    Should I set my sequence at 23.976fps instead of 24fps?
    Thanks in advance for the help, and sincere apologies if this is a noob question.
    David

    That makes it easy.  Remove the CGs from the project.  Go to Edit>Preferences>Media... and set the Indeterminate Media Timebase to 23.976.  Then when you import the image sequence, PP will assign it the correct frame rate.
    Edit in a 23.976 sequence.

  • Fat EQ in Soundtrack Pro does not export the mix!!!!

    I am very frustrated. I have been trying to export a mix from Soundtrack Pro with a preset using the Fat EQ. How complicated can this be?????
    I export to FCP6 as a AIFF file. How complicated can this be????? This software has a flaw. It will not turn my sound file from FCP which I import into STP. It works fine in STP but then will not convert into an AIFF by the time it gets to FCP/Desktop. All I get is a blank sound file. Not happy with this software so far. FCP6 seems fine. What the heck is going on here???
    I am limited as to what I can mix in FCP6 with the audio tools. I thought STP could be helpful, but it is driving me up the wall!!!!!!
    Please someone help me export my file some way so I can use the EQ's and mixers in STP like it is designed to do.
    Frustrated with STP.
    Rory

    Yes, just a stereo file. STP version 2.0. Final Cut Pro 6. One of the filters worked once in STP 2.0, then it does not, it seems very finicky.
    I am sending my audio files from the timeline to STP for audio editing. Then I apply the EQ once the project is in the main page of STP. Everything is good here, the EQ applied works, everything works just fine.
    I then go to File >Export > Save As .... and then export it as a AIFF file. This is where something happens. It seems my fat EQ is working in STP, and then after it is exported back to FCP 6 there is nothing, nothing. There is an audio file, just no data at all, no sound waves.
    The Autofilter seems to work when it is applied. It worked for the first 2 times anyway and then did the same as above. I am going to just edit audio at an external independent studio I think. I can't be bothered trying to figure this out for the duration of the project. It is too time consuming.
    Sad Rur

  • Exporting Multi-Channel Split-track Stereo

    Hello,
    I am wanting to export multi-channel split-track.
    I have 3 tracks in my sequence: 1 mono track for COMMS, 1 stereo track for FX and 1 stereo track for the soundtrack.
    What is the best way to to export this so that I have 3 stereo pairs?
    I could do this easily in FCP 7 but the fact that stereo tracks occupy just one track in PP complicates things a bit.
    Thanks
    O

    Ok so i order to help anyone who is interested.
    The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
    i then imported this into premiere pro.
    this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
    Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
    this is the only way i was able to send stems with all the edit points and fades for the sound editor.
    If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
    Fingers crossed Apple fixes the fcpx xml export.

  • Exporting from STP to a quicktime movie?

    Can anyone tell me why STP exports such a small file size.
    Example...
    I Send a sequence from FCP to STP as a multitrack project.
    I then added music in STP and exported the master mix as a quicktime movie in h.264 format with no compression.
    It cam out at just over 200 MB. Which is way to compressed.
    So then I exported it from STP to FCP and then exported the same movie as quicktime h.264 uncompressed and it came out at over 2GB.
    Seems like a major waste of time having to send it back to FCP just to export a decent size quicktime movie.

    When you export your mix "Using compressor" adjust the video compression so it's more to your liking. Or use the preserve Video setting which will pass the video through unchanged from the original.
    !http://www.rdiv.com/screenshots/STP_exportCompressor.jpg!

  • Exporting clip from timeline as QT movie

    Hi all
    Is there an easy way to export as a QT movie a clip (or series of clips, 'mixed') to a QT movie with the same format as the timeline for easy re-importing? I often find myself wanting to export a group of clips (with matte, text or effects, perhaps) and then re-import it as one easy to manage clip. A kind of 'bounce selected clips to disk'kind of deal. I know I can export the whole timeline, but I often want to export just a bit of the timeline.
    I hope that makes sense
    Regards
    Stephen

    Absolutely. It is a basic function and I use it all the time.
    Export a Quicktime Movie (first option in the list) making it self contained and using the sequence settings. You will end up with a clip that is independant and has the same settings as your sequence...no loss in quality whatsoever.
    Shane

  • How to export slideshow and soundtrack as one movie file

    This may be a bit naive...I created a keynote presentation, with a soundtrack. When I went to export it, I clicked "include audio," as well as "include soundtrack" (since i wasn't sure if audio also includes the soundtrack.) The result is 2 .mov files, one of which is the soundtrack. However, I need it to be only one file, so that I can upload it to a school video website that expects the file to have both the sound and the images in one file. Don't quite understand what I have done incorrectly. Thanks.

    I just discovered this myself.
    For some reason TWO files are exported. The manual says something like "If the slide show
    contains a sound track, two movie files are created. The file with suffix "soundtrack" contains audio
    only and can be deleted".
    But the other one does NOT contain any Audio.
    WHY, Apple? Are you listening? Lots of people experience HORRENDOUSLY bad results when exporting from Keynote. Sounds are not in sync - or when exporting to QuickTime: missing all together.
    What is the point in exporting a separate sound file and leaving the other one WITHOUT sound???
    Can someone at Apple please explain the reasoning behind this.
    Or even better - tell us how to actually get a working QuickTime export?
    Seriously - I didn't leave PowerPoint behind for this kind of non-functioning.
    Stop making silly software that doesn't work, and make tools that we can actually use to fill our needs.
    Or is it all about phones, these days?

  • Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in.  Can this be corrected?

    Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in.  Can this be corrected?

    Howardok
    Premiere Elements 11 on what computer operating system?
    You should be able to right click the finished Instant Movie on the Timeline and select "Break Apart Instant Movie" to do just that.
    Then open all the tracks, expand the Timeline with the -+ slider above the Timeline, and edit your Instant Movie.
    Please review and consider. If you have questions or need clarification on the above, please do not hesitate to ask, but supply more details.
    Thank you.
    ATR

  • OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC 2014

    OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC. When trying to click on a specific line of code in a js file the cursor ends up in a different place in the script and several lines of code highlighted. Clicking again jumps the mouse to a different position and even more lines of code highlighted and some characters rearranged, breaking the lines of code. Very frustrating.

    Preran,
    I am having the same issue. I have a MBP connected to 2 x Dell 27" monitors over Mini DisplayPort to HDMI cables. Once I updated to OS X 10.10.2 this cursor highlight/jumping around issue only occurs on the connected monitors. If I move the program to the main laptop display the issue goes away. It does not require me to restart the program or the machine to make it work correctly. One way I am able to identify the issue is if I go to the line numbers in code like I wanted to select multiple lines - in the one that works correctly, the cursor turns into a white version where the tip of the cursor points to the right. When it is wrong, the cursor stays black and will only have the tip point to the left. Its just another way I identified if it was working cause I tried uninstalling DW and reinstalling - didn't work. Reset preferences as you discussed - no go. And I used other editors like IntelliJ and Adobe Edge Code - all of which work fine and don't display this issue.
    I tried the preferences reset you suggest and it doesn't work. I have another machine with OS X 10.10.1 on it and this issue is not there on any monitor. Any help with this ASAP as it pretty much stops you from being able to do any editing especially with longer pages as it consistently wants to page up when you select anything and if you then click again in another area it tries to move the highlighted code to that new spot.
    Update: I have a USB Microsoft Arch touch mouse connected (always worked just fine). When I go to place my cursor at some point in the code it causes the highlight flicker. If I switch over and use the built in trackpad, then I can place the cursor without the highlight issue. When trying to select multiple lines or sections of code, that still see's the highlight, page up and move of code issues regardless of input type.

  • How can I export a keynote proyect to a movie?

    I am making an assigment for the university and I don't know how to export a keynote presentation to a movie, ( with short videos and narration inside of it ).
    I tried quicktime export and it didin't work , the whole timing thing was awful!
    I really need this presentation to be exported into a DVD or a CD or anything so I can give it to my guide teacher...
    Help me please
    PS: I am using a MacBook Pro to make this

    This is a well known problem with Keynote 6.1, the only thing you can do is use Keynote 5.3 instead, if you have it.
    Meanwhile sit back and wait to see if Apple issues a fix in the schedule of updates they said they would issue during 2014.

Maybe you are looking for