Saving psd file as jpg

Hello all -
I have recently upgraded from PSE–3 to PSE–9.0 on my Intel MAC running OSX 10.5.8.
With PSE–3, when I wanted to save a psd file as a jpg, I would click File/SaveAs, and in the subsequent window select JPG. When I did that, the file name at the top of the window changed from xxx.psd to xxx.jpg and the resulting saved file was, in fact, a jpg.
When I attempt the same thing with PSE–9, the file name changes from "xxx.psd" to "xxx copy.psd". The resulting file is saved as a jpg, but with a ".psd" extension.
I went to PSE–9's 'Saving Files ...' Preferences window. I changed the 'Append File Extension:' option from 'Never' to 'Always' and clicked 'OK'. When I reopened that window, 'Append File Extension' was still set to 'Never'. I have been unable to save the 'Always' option. Thus the renamed files have always been "xxx copy.psd".
Have I been missing somthing? Is there something else I should do? Or is it a bug in PSE–9?
TIA for any thoughts -
- Ddgt

Yes, it's a bug in the mac version of PSE 9. Just opening the Saving Files preference causes pse to stop appending the file extension. You can either enter it manually, or quit the editor, relaunch it while holding down command+shift+option and keep the keys down till you see a window asking if you want to delete the settings file. You do. Then never go to that particular preference again.

Similar Messages

Error saving psd file to jpg file HELP?

I have PS version 9.0.2 I can't save psd files to jpg all of the sudden...I live in Escondido, California and had to unplug everything when told to evacuate for the fires. Do I need to reinstall PS or ??? something about dumping preferences, how do I do that? Need a hero!

Yes, it's a bug in the mac version of PSE 9. Just opening the Saving Files preference causes pse to stop appending the file extension. You can either enter it manually, or quit the editor, relaunch it while holding down command+shift+option and keep the keys down till you see a window asking if you want to delete the settings file. You do. Then never go to that particular preference again.

Saved psd file as jpg by accident and closed photoshop.

hi, I have saved my logo as a jpg file instead of psd and closed photoshop, now I do not have any layers to edit my project. Please help me if this is possible to fix.

No, you only have what is in the JPEG. This is why you are forced to save a COPY when saving JPEG, so you still get a warning to save when you quit.

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong, never had this problem

I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong? , never had this problem before. Help!!!

Your description of the issue is not clear:
What format, bit depth and color was your original file "from the net"? It sounds like it was a Color Indexed GIF, which would cause what you are describing.
In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
If the image is a 256-color GIF, remember the rule: GIGO = garbage in, garbage out.

Does elements 13 support saving psd files

does elements 13 support saving psd files? or is it a different way i.e. tiff?

In the pse 13 editor go to File>Save As and select Photoshop (.psd) from the choices beside Format

While editing saved PSD files, png elements have a white background when resized

Hi,
I'm not sure what I'm doing wrong. When I open a psd file that I previously worked on and saved, when I try to resize or in some way change the different elements(layers) of the layout, they get a white background inside the bounding box for that layer. The different elements(layers) where pulled in from png files that had transparent backgrounds. When I initially resize or change those layers the white background doesn't appear. It only happens when I reopen the saved psd file to make some changes to it. What do I need to do to stop that from happening?
Thanks in advance for you help!
Katheryn

You can't drag from the project bin in PSE 6 and 7. Items you move this way become a kind of semi-smart object on a special passthrough layer. Use copy/paste or drag from the layers palette of the png file into the main image window of the psd file.

When round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

when round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

That's not the workflow that I use. I have my Lightroom preferences set to create TIF images when going to Photoshop. I keep the original raw file and the TIF image (usually reduced to an 8-bit image) and only export JPEG's when they are needed to send to a lab or to send to someone over the Internet. JPEG files are highly compressed. I only create them when they are needed, and they are discarded as soon as they have been used for their intended purpose. I keep the raw file and the Photoshop-created TIF in my library. This requires extra disk space. But I always have the highest quality files available.

Saving a file in jpg max resolution (12) PH cc

Hi there,
Recently I've changed my laptop and re-installing Photoshop CC in its last version.
When I gonna save a file as JPG automatically it gives me back "8" like quality of image and not "12" . In the other Mac it gives me back all the times 12 and there's no problem to do mistakes saving a file.
Is there a change to do into sets-up ?
Mac user.
Cheers
Mattia

A workaround is to use File->Save As...->Change the file type to JPG->Save, a JPEG options window should come up, just move the slider to the far right, or type in 12 into the box to the right of the slider.

Photoshop CS2 Saving a file as .jpg

I recently installed Photoshop CS2 in my Windows 8.1 machine and now when I create an image in PHotoshop I don't have an option for saving the file as a .jpg in the drop down menu Can anyone help?

With CS2, you have to make sure the image is flattened, there are not paths, no extra channels, in RGB colorspace, and 8bit. The current versions of PS does this for you, but not CS2.
BTW, you said you just installed CS2, which is a very old program. I hope you have a license for it. See this thread:
https://forums.adobe.com/message/6290183#6290183

Saving PSD Files in Photoshop CS5.5

Hi,
I am new to photoshop and I am having a problem saving my layers in PSD Photoshop cs5.5. I created 4 layers and they all look great. the screen shot of my properties panel looks like this:
The problem is that after saving it as a PSD file and during the save process the layers box is checked, it wont open with all layers. So if I close the original that has all 4 layers and then reoping it after its saved, its not the same. The picture looks proper and all layers are in the picture, but on the side properties panel it looks like this
Please help, because now I am not able to edit this picture later if I like because I cant select the individual layers.
Thanks,
Rylan

Did you drag it into Photoshop on top of an already open canvas to open it? Try dragging it to the BORDER of Photoshop instead.
-Noel

Saved PSD files show up as small thumbnails oinly in Bridge

Ive been working on some photos in ACR/CS2 and a strange thing happened. After working on raw files I save them in a separate working folder as psd files. Suddenly, for no apparent reason, my PSD files are showing up in Bridge as tiny thumbnails. This just started happening in the middle of working on a folder of raw files. The first few were fine and then the saved files began showing up as thumbnails.
Moving the slider to make them bigger doesnt do anything. I can make all the files smaller by moving the slider to the left, but moving to the right only makes the files thumbnail size. Very weird. This problem seems limited to Bridge. In PS they look fine. Ive even checked their file size and that looks fine. Ive closed and reopened Bridge, but that had no affect.
I cleared ACR preferences and purged the folder; that brought back some files but then others became small. Also when working on new files, the first few were again OK and then again files became thumbnail size in Bridge. I can open the files, save them to another folder and then copy them to the original folder, over writing the old, thumbnail size folder. I suspect all this has to do with cache and some setting, but I can't figure out the random nature of all this.

Actually I found the problem... under Bridge preferences, check to see if the "do not process files larger than ____MB" is less than the PSD file size.... i.e. my psd file was 229.24mb and my limit was set at 200mb... then once you change this go to cache settings and purge, it will reset the thumbnails and clear the small view issue.

Saving PSD files after exporting from Lightroom saves incorrectly

I've only recently moved to Lightroom from using Photoshop/Bridge together, so I'm not 100% sure how saving files exported from Lightroom should go. But here's what I experience:
Base edit of file within Lightroom
In library view, right click on image -> Edit in -> Open as Smart Object in Photoshop
Perform all my necessary edits and such
File -> Save As, and save it to another location as a PSD file (totally different HDD)
Perform more edits....
Shortcut CTRL+S to save, and it saves it as the TIFF file under the location it was originally in within Lightroom
Eh...? Am I missing something. It should just save as the original PSD I created when I went "Save As". I have seen on a few occasions, immediately after "Save As", the file name resorts back to TIFF and not as PSD.
My settings for External Editing in Lightroom are as follows:
File Format: TIFF
Color Space: ProPhoto RGB
Bit Depth: 16 bits/component
Resolution: 300
Compression: None
Does anyone have any ideas what I'm doing wrong? Also, to note, that sometimes I double click on the Smart Object within Photoshop to load Camera Raw and perform some edits, but not often.

Modesto Vega wrote:
Replying to your last 3 posts.
Re Camera Raw being used to pass an image to Photoshop
a) I am assuming this is independent of the Compatibility level in Preferences\File Handling DNG creation.
b) Does the same apply to other photo editing software made by Adobe like Elements?.
Reply: Yes, the principle is the same. Photoshop Elements cannot read raw data either. That's why it has to be converted before it's opened.
c) Assume that I have LR 5.7.1 and CS5. Is Camera Raw is still used to pass an image to Photoshop? If so, why is there a need to get LR to behave differently?
Reply: Camera Raw is used IF you choose the option to open anyway. Then Camera Raw will be used to convert the image that's opened in Photoshop. But since it is older than Lightroom some of the new adjustments might not be transferred to Photoshop. That's why there is a need to let the user make the choice.
d) Sometimes it does seem as if Adobe might be using Camera Raw updates and process version updates to get consumers to change their habits, this includes having to buy subscriptions or having to change workflow to some ideal that somebody at Adobe or working with Adobe might have in mind.
Reply: The fact is that in the past, when a new version of Photoshop is released then all support and updates cease for the previous version. Since the introduction of the creative cloud, at least users of Photoshop CS6 get support for new cameras. They just don't get the new features. Yes, there's motivation to upgrade. Adobe is a business. What do you really expect?
Re stacks
I find impossible to see collapsed stacks on the film strip. Stacks are only visible on the Library module and using a grid view; I don't say clearly visible because they are only recognisable by the label at the top left corner with the image count; I don't even think it is possible to change the colour of that label or the grey colour surrounding an image. Also I cannot name stacks. If I could name stacks, see them as virtual folders underneath a library folder and make them glaringly visible I would use them extensively.
Reply: The only reason I can think of that you are unable to see collapsed stacks on the filmstrip is if you have the filmstrip reduced in size to the point that Lightroom can't display all the icons. I'm able to see the collapsed stacks in the library grid view and on my filmstrip
Re storing your Raw files and processed files in separate locations
Assuming Raw files are negatives and Photoshop files are transparencies or prints, would you want negatives being handled/read on a regular basis? If anything happens to your negatives, you would never be able to produce another print or another transparency again.
Reply: The raw files or the negatives, as you put it, are never modified by Lightroom. They always remain in their pristine state they were in when they were imported. If I have a backup of that raw file then I can do whatever I want to the one in my working folder. Resetting that raw file so that it looks unaltered is just a click away.
I have worked extensively with databases and database systems, it is a standard feature of database systems to be able to choose where to store different database objects. I don't see why LR cannot do the same, it is a database after all. I do agree with both the OP and photo.
Reply: Well, I won't argue that point. If that's what you really want than lobby for it. It just won't get my vote because I don't see any real advantage.
If you read back through this quoted message you'll find that my replies are included. I don't know how to separate them out so they are highlighted properly. Read through it and think about it. But personally, I don't want to waste anymore time on this discussion because it isn't accomplishing anything in my opinion.

How do you convert psd files to jpg files?

Raw photos were converted to psd and then to jpg. The jpg files were imported and some got reconverted to psd files again. How can I convert them back to jpg files so that I can put them in a photo book?

the basic answer is to open them in Photoshop and save as a jpeg to the desktop and import the JPEG into iPhoto
Raw photos were converted to psd and then to jpg. The jpg files were imported and some got reconverted to psd files again. How can I convert them back to jpg files so that I can put them in a photo book?
perhaps a bit more information would allow a better answer
And remember to never go into the iPhoto library directly and never make any changes to the structure or contents of the iPhoto library
LN

My recently saved .PSD file is nowhere to be found.

Hello!
I recently saved a few Photoshop files, and had been accessing them using the "Open Recent" menu. Well, a few minutes after I saved, the system crashed, and when I restarted and opened Photoshop, the "Open Recent" list was empty. Then I searched for the files and can't find them anywhere. I've looked by searching the file name in Finder and in Spotlight, and have even done a search for all .psd files, but the recent ones are missing.
If I create a dummy .psd file and save it, it goes to a folder with a string of letters and numbers, but I can't find the path that leads me to where that folder might be. Is there a weird hidden folder that Finder can't detect? I feel like the files must be there somewhere, because they were saved several times before the crash, but where?
Thanks!

I didn't, but I did specify the location each time that I exported. First, it was to a designated folder not too dissimilar to what you suggested. The other times, I specified the Desktop. No where to be found. More importantly, my hard drive's available MB's shows the same amount that it showed prior to starting the export.
To review my problem:
1) It's at 9 gigabytes available when I begin
2) It says it needs 6 to do my video.
3) I begin it, and it goes through the export
4) It finishes.
5) The available hard drive space is 3 GB.
6) The movie isn't where I specified.
7) I did a finder search for the file without luck.
8) I restart the CPU, and it shows 9 GB available again.

Saving psd file as jpg

Similar Messages

Maybe you are looking for