Saving reports to Browser

Hi,
I just want to clarify something about the browser. When there are roles setup for end-users, and actually the Security or Basis person can put the queries into the roles from PFCG for the end-users to run their own queries. Is this correct? I didn't think that the end-users would have to go through RRMX to pick and choose the reports into their favorites, so that they can run their reports from the browser.
Any other approach in putting the reports into the browser for the end-users to run the reports and not have to see those system transactions saved as favorites too?
Thanks
"There are two modes of establishing our reputation: to be praised by honest men, and to be abused by rogues. It is best, however, to secure the former, because it will invariably be accompanied by the latter." ~ Charles Caleb Colton (1780 - 1832), an English cleric, writer and collector, well known for his eccentricities.

Hi,
Thanks to all. We only have 1 BW system to work with and roles have not been created to maintain the security of the system, so I am asking the user to go through RRMX to pick and choose the reports to save them into the favorites because it is user specific and I can't do that for them from my account.
Thanks,
"The most perfidious way of harming a cause consists of defending it deliberately with faulty arguments." ~ Friedrich Nietzsche, German philosopher (1844 - 1900)

Similar Messages

When navigating back to a page with an IR, a different Saved Report shown

I have a page with an interactive report. I have several saved reports. One column has a link to another page in the application with address details. When I follow the link I correctly see the page. I click the "Back" button on the browser to get back to the interactive report. At this time, the saved report that is selected may not be the same as the one that was selected before I clicked the link.
How can I tell the currently displayed report id so that I can use that to populate an Item to be linked used as the Report ID Item?
Thanks,
Danny

the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
heere is the note they sent - but some of the urls dont resolve
Jaff said:
If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
http://www.whatismyip.com/
Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
http://portforward.com/english/applications/port_forwarding/Splasht...

Can we sort saved report list by name

Hi,
I have interactive reports and users can open this interactive report and according to their different requirements they can save this report(as a public) with different names.
Ex: interactive reports
Reports(lov) :1.Primary report
2.xxx test
3.yyyy
4.abcd test
5.zzzz test
Can we sort saved report list by name?
Could you please guide me to achieve this requirement.
Thanks in advance.
Regards
Narender B

Narender wrote:
Hi,
I have interactive reports and users can open this interactive report and according to their different requirements they can save this report(as a public) with different names.
Ex: interactive reports
Reports(lov) :1.Primary report
2.xxx test
3.yyyy
4.abcd test
5.zzzz test
Can we sort saved report list by name?
Could you please guide me to achieve this requirement.It's a lot easier to do so if the following information is provided (as has been repeatedly pointed out to you):
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
Sorting of the saved report list by report name was introduced in APEX 4.1.

Report Designer - Error while opening a saved report

Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.

Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
    open your report with option "DT" (designtime)
2) Switch to Edit mode.
    Make a backup copy of the report using the "Save As" Button.
    You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
      Report Desginer ( --> The version is set to 9.0).
      Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
      Open a report and change the value of E_REPORT_VERSION to "9.0"
      before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224

HELP IR Download filtered saved report to CSV

Hi there
My enquiry is to do with the saved reports feature in Interactive Reports Apex 4.1
I create a default IR report and then I subsequently define a filter on this report effectively limiting the displayed output to the rows of data I want to see. I then save the report which is now a 'private' report. If I run the 'saved' (with the filter condition) IR report it displays the data correctly, with the 'saved' report displaying the correct data on the screen I then click Actions->Download and then select CSV - the entire 'primary' report is downloaded -- The filter is ignored!!! Surely the Actions->Download should 'know' that I want download the report that's being displayed (just run) on the screen?
I think that when you click on the CSV icon the report is re-submitted - How can I get the CSV download to apply the filter that I've defined in the saved report.
I've searched this forum and found the following similar question being asked
Re: Problem with export from a saved interactive report
Interactive Report Download to csv problem
how to download only filtered data in csv?
Re: Download Saved Report in IR 4.1
Thanks in advance
PS: Is the above an undocumented feature of Apex IR Reports?
Edited by: boketi on Sep 25, 2012 7:05 AM

Hi Sathish,
Thanks for your comment.
I agree with just a 'default' report the CSV download always gives what is displayed on the screen. If you then define another report with a filter condition and run this 'private' report 'sometimes' the CSV download gives the origional primary report, ignoring the filter condition. Please see the attached links as other people are also getting the same problem.

IR Saved Report - Download to CSV downloads Primary Report

Hi there
I'm using Apex 4.1, I login to my Apex application NOT using the developer interface (the developer buttons are not visable at the base of the page) as an end user would see.
If I run an IR report and then create a filter on the Primary report the report runs OK. I then click Actions -> Download and then Download the report output to a CSV file (correctly filtered) to a Excel spreadsheet. I then Save this report giving the report a Name and Description. I then logoff from the Apex application. So far so good.
I then login back on to my Apex Application. When I choose and run the Saved Report (described above - not the Primary report) the saved report runs correctly (applying the correct filter condition), HOWEVER when I then click on Actions - Download I seem to get the Primary report downloaded as a CSV file into my Excel spreadsheet - the filter condition that is applied to the saved rerport is ignored for the Downloaded CSV file. The File Downloaded is a new CSV file generated in Apex as reported in my Firefox 'Downloads' list.
Does anyone know if this is a Bug or have I not set up the IR correctly.
Thanks in Advance
Edited by: boketi on Aug 13, 2012 3:18 PM

boketi wrote:
Hi Mehabub,
Many thanks for the quick response.
Did you test this in version 4.1 of Apex? I logged on to Oracle's 4.2 Early Adopter Beta Site and did the same and the IR works fine! Maybe it's a strange problem in 4.1 although I doubt it as with such a problem there would be a lot more noise on this forum. Could this be related to the 'theme' that I'm using? As the theme I'm using was origionally developed for Apex 3.2 and I don't think IR reports were around in 3.2?There is a good chance that it has to do with the theme or the upgrade from Apex 3.2. Interactive reports existed in 3.2 also user defined reports. But a lot of changes were made to the IR logic since 3.2 (introduction of multple standard reports, etc.).
I just tested your case in my Apex 4.1.1 version in an application that was also upgraded from 3.2. And the data was stored correctly into a csv file.
But it is useing one of the standard themes that was also updated.
Did you set the compatibility mode of your application to 4.1?
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#AEAPI2329
begin
apex_util.set_compatibility_mode(<application id>, '4.1');
commit;
end; Just because the environment is Apex 4.1 does not mean you application runs in 4.1. mode.

Context Overflow Error while executing report from browser.

Hi All,
I am running one report from browser, the same report is running properly on backend.
But when I am running the same for long period (more than 2 months) it is giving me context overflow error.
I have also checked the value of parameter MaxCtxtSize on ITS and it is currently set to 5 MB.
Should I increased this value ??? ITS version is 6.20 - Standalone.
Pl guide me to solve this problem.
Regards,
Aditya.

Dear Edgar,
Thanks a lot.
Below is the error message reported in the file diagnostics.log.
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: Runtime error: Assignment to context failed
(context overflow)!
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpttRuntimeError: jump through trap...
A 2009-02-03T09:12:24.039 [agate,sapjulep] 00, s02748798, PpioTraverseHtmlPP: PpttTraverseParseTree(D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x306
A 2009-02-03T09:12:24.039 [agate,sapdiag ] 00, s02748798, HtmgBuildHtmlPage: IntpDoInterpret (D:\SAPMPS\config\..\IT1\templates\system\dm\generator.html) failed, rc=0x2104
A 2009-02-03T09:12:24.039 [agate,sapxgdk ] 00, s02748798, ContAllocAligned: Allocating 52 bytes (16 of 5242880 bytes available) failed, no streaming supported. Consider bumping a container size (3) in the registry.
Pl help.
Regards,
Aditya.

I have the latest version of Firefox yet my computer says on my home page that i need to install the latest version, also Youtube reports my browser no longer supported download the latest version

this is what is under my help tab (about Mozilla Firefox) It seems I have version 2.0 in there some how.
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/2.0.0.9;EGAMES 1.0 (.NET CLR 3.5.30729)

You have a corrupted user agent:
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/2.0.0.9;EGAMES 1.0 (.NET CLR 3.5.30729)
See:
* [[Web sites or add-ons incorrectly report incompatible browser]]
Check the general.useragent prefs on the about:config page.
You can open the about:config page via the location bar, just like you open a website.
Filter: general.useragent
If any general.useragent prefs are bold (user set) then right-click that pref and choose Reset.

Interactive Filter Saved Report Subscription by Email

Hi
I did Interactive filter and saved a report. The interactive filter is performed between start and end date with a location details. I would like to have a custom header with title like this
Data is obtained at Location Name from <start> and <end> date. This saved report is send to few people every day.
The date, location name are present in the result set of the report. What is the best way to achieve this custom header in saved reports?
Thanks
Raj

Hi Raj,
You don't be able to do that with he current apex subscription functionality, however you could write a simple plslq block to send the formatted email which looks same as interactive report.
Look at this thread and the links inside them
{message:id=10350580}

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

Can we launch Crystal Report via Browser?

Hi, Experts
I have created a Balance Sheet report (T-Style) with the help of BOBJ-Crystal Reorts.
But I wanna to consume this report via Browser, neither email with PDF/Excel attached, nor Crystal Report 2008 designer.
Is there any solution/tool to make this happen?
How can I implement it?
Thanks a lot.
Peter Zhou

You are able to view Crystal Reports via a browser in a few ways.
1. Report is published to Enterprise and you use Infoview to browse to the report and view.
2. Report is published to Enterprise and you use a custom application written in .NET/JAVA to view the report, loading it from your enterprise server.
3. Report is stored on disk and you use a custom application written in .NET/JAVA to view the report.
For viewing in a custom application please visit [diamond.businessobjects.com|http://diamond.businessobjects.com/]
The documentation for the SDK's can be found in the Developer Library, and sample code can be found under the Sample Code.

Download Saved Report in IR 4.1

Hi,
I have a query regarding saved reports feature in Interactive reports 4.1
I saved a normal report by adding some control breaks etc and make it more readable.
I then saved it. Now if I want to download my saved report - I can't.
It always downloads the default report layout.
Can anyone help how to do this?
Many Thanks,
Jas

Hi Nico,
I'm using Apex 4.1.
The odd thing is that for some reports the download to csv of the 'private' report works OK, others don't work OK -- It's weird. And I'm defining the filter conditions and saving the report in the same way.
A similar post was raised by Robert G. Re: Problem with export from a saved interactive report
I appreciate your comments
Thanks
Boketi

How to hide saved report filter condition

Hello,
I create an IR report and pre-create some saved report.
I would like to hide filter condition when end-user select one report on the list so that he/she cannot see and delete the condition.
Is there anyway to do that?
Thank you.

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

How to run report in browser

hi every body,
please tell me , i have developed a simple report in 10g report builder (oracle developer suite)
but i m unable to run it
my 10g forms are running well in browser by using
http://<Machinename :8889>/forms/frmservlet?config=<config_tag>
Please advise me how to test or runb the report in browser same as form
and tell me how to create the report server/find report server and configure the source path for it.
regards
Mani

You may start digging at...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm

Saved reports in apex 4 vs 3. Can i back to tabbed system?

Hi, After upgrading from apex 3 to 4, i can see saved reports have a dropdown box instead a tabbed system. can i back the old tabbed system?

Should be no problem.
Just create a Classic Report and change the display as type of the columns you want to make editable.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at
Training: http://www.click-click.at/apex-4-0-workshops

Saving reports to Browser

Similar Messages

Maybe you are looking for