Saving signature in the profile...

Shoudn't there be an option to save your signature in the profile ? If someone writes his name and blog URL in the signature, he has to type or copy/paste it for every post he replies to. This is a very basic thing and present in almost all the forums.
What you guys think ?
PS: Another stupidity, while adding tags you need to seperate multiple tags by "space" and join by an "underscore" if you want to combine two words. Its funny really. Why not simple comma as everywhere else on all the forums, blogs etc...
Amardeep Sidhu
http://amardeepsidhu.com/blog

Amardeep Sidhu wrote:
Shoudn't there be an option to save your signature in the profile ? If someone writes his name and blog URL in the signature, he has to type or copy/paste it for every post he replies to. This is a very basic thing and present in almost all the forums.
What you guys think ?
Same.
But if you are using Firefox, here below a trick :
Re: Automatic signature into a post
nicolas.

Similar Messages

Set Email signature through configuration profile

Is there a way to set the iOS email signature through a configuration profile (.mobileconfig)? If not, is there any other solution instead of copy-pasting the signature into the Mail.app prefs?
Regards,
Christophe

Hi,
Automatic E mail notification can be acheived as follows
1. First of all decide on what basis would you want to trigger the action for eg. based on status or Date profile ...
2.Make partner dependent in the action definition and put the responsible partner function.( for eg:- employee responsible)
3.Now for your action profile maintain the Schedule /Start condition (if status = in process).
This will trigger the action (partner dependent) when status is in process and the document is saved(Action Definition) .If you want the mail to go after a stipuleted time you can attach a date rule to your action and a date profile with that rule to your transaction type .
Please reward if it helps!
Cheers
Raj
Message was edited by:
shankar raj

Is there a way to save a fillable form (in Reader) as a static (uneditiable) image and send it for signature without the recipient being able to revise the fields at all?

Is there a way to save a fillable form (in Reader) as a static (uneditiable) image and send it for signature without the recipient being able to revise the fields at all? I have designed a number of fillable forms and sent them to our clients as Reader extended pdfs to be filled out and sent back. Now, certain clients want to be able to fill in the fields and save the doc as a pdf that can't be tampered with so that they can send it to their own people for signature to be returned to them hand-signed and scanned via email.
Since the forms have been secured, and my cleints are only using the free Acrobat Reader, how can they save the filled in form as a static pdf to send on for signature? They do not want to have to print, scan and email. Is there an app, plug-in, simple solution to this?
Thank you,
Rumor

The signature WILL work! I've just looked into it more, thank you so much for pointing me in that direction.
I get it now, it locks the form fields in place after my coworker fills them in and signs it (as the very last step).
I wish I would have asked on here a full day ago. Would have saved a lot of headache and Googling.
Thanks again.

How can I install WebOfTrust for a local account and save the profile so that it transfers to domain accounts that log on to that specific computer?

We are creating images through ghost server to clone onto several laptops and one of the features we need to have configured is the Web of Trust extension in Firefox. I have configured a local account on the machine and set up Web of Trust and then copied the profile image in regedit to the default profile image and saved this. WOT works for local accounts but whenever I try domain accounts, Web of Trust needs to be disabled and re-enabled.

Try using Web of Trust support:
http://www.mywot.com/en/support
Or post in their user support forum:
http://www.mywot.com/en/forum

To print Digital signature on the Purchase Order

How to print Digital Signature, on the PO Print copy (PDF).
It will be based on release strategy. Whoever is approving the PO, his signature should be printed automatically on the Purchase Order.
How to achieve this ??
Please let me know in detail
thanks
amit

Hi Amit,
I am not sure on how to get the the signature of the person who released the PO, because as per my understanding the Relase Strategy i.e the Relase code is attached to a Basis profile.
What I would suggest is if you can get all the guys who can release a PO and define him as a Purchaser ie. a Purchasing group then it would be easier to print his signature in the PO.
Here are the Highlevel steps
1. Just have the Signature you want to print in a Tiff format.
2. You can upload the signature as a standard Text using program RSTXLDMC to upload and give a text name.
3. call the text name in your sap scripts.
reward if useful.
Thx,
MJ

How do you unlock fields when clearing the signature using the SignatureServcie?

I have a workflow built using Process Management and is available through Workspace. A claimant completes their expense report, digitally signs the form and submits it to their approver. The form is setup to lock a set of fields after signature. The approver then has the option to approve or disapprove the form. When they disapprove the workflow clears the digital signature using Clear Signature Field operation in the SignatureService and routes it back to the claimant. When the form is opened by the claimant the digital signature has been cleared as expected, but the fields are still locked. Is there an autoamted way to unlock them? Is this a service configuration issue or is there another service operation we need to call after clearing the signature?
We did try using Javascript to set the readonly property on the field with no luck. Any thoughts?
We are developing on ES3 and will be upgrading to ES4 in the next week.

You need to link the image. See the example for the Canada flag below.
<img src="http://forums.ni.com/ni/attachments/ni/130/6908/1/Canada-small.PNG" border=0>
Replace with the image you like. This goes into the signature box within the profile tab of the personal settings.
RayR

How do I get to the profile folder to change settings?

A spammer has taken control of my email. AT&T says I need to change my firefox profile settings but I can't find the folder. How do I get to the folder.
== This happened ==
Every time Firefox opened
== Last Thursday

Robert, if AT&T says that you need to change Firefox profile settings, you need not actually view the Profile folder. All you have to do is change the Firefox settings by clicking on '''Tools''' at the top of Firefox and then selecting '''Options'''. When you change the Firefox settings this way, they are automatically saved into your Profile folder.
In case you wish to reset your Firefox settings to what they were at the time Firefox was installed, please follow the instructions in this article: [[Resetting preferences]].
Anyway, just for your knowledge, you can view this article to find out how to locate your profile folder: [https://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile How to find your profile].

Internet Explorer 10 and 11 not saving cookies when Roaming Profile used.

Hi,
We are using Citrix Xenapp 6.5 with roaming profile and IE9.
I have tried to upgrade to IE10 and IE11 on a test Xenapp server, when we log off Windows and log back on again any website settings stored in cookies were lost.
The cookies is stored in the roaming part of the profile. New in IE10 is the webcache file database that keeps track of cookie stored in the profile
AppData\Local folder gets deleted when you log off, if you have a roaming profile, and when you log on again all coockies are rewritten. Same problem with IE11.

Hi,
Here is a workaround to make cookies work is to set a Group Policy Preference to set the registry value, please see detailed instructions in the following link
Internet Explorer 10 not saving cookies when Roaming Profile used
http://rcmtech.wordpress.com/2013/08/30/internet-explorer-10-not-saving-cookies-when-roaming-profile-used/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda
TechNet Community Support

Ensuring the profile is embedded

Hi
I have a eMac and calibrate my computer with a Spyder2Express.
Have Lightroom and newly required Photoshop CS3
I have a novice when it comes to colour management. Having never printed my photos
For the first time ever I have decided to have some of my photos printed by a recommended Lab.
The requirements from the lab are: This lab requests 200 dpi. My requirement is for the lab to print for 5X7.
Colour Profile:
1.This can be Adobe98 sRGB or ProPhoto RGB.
2. Please ensure the profile is embedded.
After Calibration the message I receive is that the profile has been embedded.
1. Does this mean it is automatic that once I send the photo to the CD burner to send to the lab, that the profile is "embedded", i e is no other action is required by me?
2. Also somebody suggested that I request a white boarder? Is this a good idea?
3. Is it best to transfer the photo to the CD burner from Photoshop CS3 or is Lightroom ok?
4. Any other help for me to take these steps as painlessly as possible?
thanks
Sue

Hello Sue.
I print my images at home from my iMac and R2400 but if I was to send them to the lab you have contacted, I would use embedded Adobe1998 or ProPhoto . sRGB is suitable for web viewing and printing out on low-end printers but the colour gamut is not as wide as the other two.
The lab aren't alluding to monitor calibration; they are talking about your images. If your camera has an Adobe1998 facility on it , then I would suggest that you use that if you are always going to have your pictures printed, as embedding the image file at source will save any confusion at a later stage of your workflow.
As a rule of thumb, Adobe1998 for printing and sRGB for web viewing, as 1998 can look washed out on the web ( just remember to change things in-camera, depending on your intentions).
The camera will then embed all your future images in the 1998 colour space, unless you change it. If your camera doesn't have that choice, then open your image in Photoshop, click on Image->Convert Colour Profile and you will see a facility for choosing Adobe1998 as the colour space for the image. Choose it, wait a couple of seconds, then save your image and it should now be embedded with the Adobe1998 profile. It assigns a new profile and changes the data of the image.
Open up the image into Photoshop and in the bottom left just under the picture, you should see a line that gives a little info about the image. Click on it's drop-down and you will see all the data on the image , such as document size and document profile. Click on document profile and you'll see the confirmed colour space of the image.
The idea is to have everything from camera to printer talking the same language. If I may suggest it : Enter 'Colour Management' into Google and have a read of some of the articles pertaining to it - it'll give you some idea of how your workflow should be ( especially useful if you ever start printing your pictures at home ). Just don't get hung up on it because it can get a bit complicated at times.
As for saving images to the desktop for copying to a CD at your leisure, open Finder and click on File->New Burn Folder and give the folder a suitable name. The folder will save to the desktop and then simply drag the images you intend to copy to CD into it. When you're ready to burn, double-click the folder and click on Burn, then insert a disc and follow the instructions. You can safely trash the contents of the folder when you have finished with them because it only saves an alias of an image.
I hope it helps you a little , although I also hope you'll forgive me for the long-winded reply !
Kind regards,
David Gaynor.

New computer with 7.01 firefox does not show previous bookmarks tho all other files restored with my ClickFree backup. Found the profile but cant open places.sqlite

safely transferred all my saved files from old dead Vista to new computer with Windows 7 except for my firefox 7.01 bookmarks & QuickNote add on. i downloaded QuickNote but it is blank too. Found the profile C:\Users\AppData\Roaming\Mozilla\Firefox\Profiles\8oy034hg.default & places.sqlite but cant open the file.Windows ask what program I want to open the places.sqlite file & i said Firefox but it doesnt open. How do I open the file & get my bookmarks & QuickNote back. help pls

Why not install and try Firefox portable, it may well be a good troubleshooting step. Try running it from an external memory stick.
The threads you referred to
* [/questions/956861] was closed but never solved
*[/questions/958824] similar
Some system information would help
*How much RAM is installed ?
*What is the total size of the Hard Disk Drive ?
*What is the current amount of free-space in GB ? and as a percentage ?
I try not to use Windows but certainly at one stage a rule of thumb was 20-25% free space should be available. Under about 12% defragging of a disk would likely fail. A page file would need to be larger than the amount of RAM maybe 1.5X , and a hibernate file would be the size of the RAM.
* Do not Hibernate if you are low on HDD space.
I suggest you proceed as follows
#Answer the above questions. I worry you have a lack of diskspace.
#Do a full scan with multiple and up-to-date anti-malware tools. Do not rely on Avast alone. No tool picks up everything. Report back what you scanned with and what was found.
#Backup and keep whatever profiles may be good or may contain recent information such as passwords and bookmarks, but do not use them yet.
#Download a new installer then Do a clean reinstall of Firefox, ensuring that the program folders are deleted before you re-install.
#Now restart, you expect the first restart to work. Close down and try again does it now work OK ?
The detailed instructions in the thread you read [/questions/958824#answer-436552] should help you.
If you have continuing problems is this after a restart of Firefox, or a restart of the Windows Operating System ?

How do i delete the saved pins on the google map?

How do i remove the saved pins on the google map on my iphone?

I have just removed several from my Iphone 6:
In Google maps touch the person button (Your profile)
Scroll down to your saved place
select it
at the bottom of the map tap on the places description to see more details
Tap the yellow star to change it from Saved to Save and you will have deleted it.

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

Is there a way of syncing local contacts only when outlook has an exchange account in the profile

I have Outlook 2010 set up with both a Pop3 account and a Microsoft Exchange account in the same profile. I have local contacts and Calendar entries in Outlook. The pop account is set up as the default account. When I sync Calendars and Contacts, then the exchange entries get transferred to the iPhone, even though the iPhone has the exchange account set up on it (and therefore I get the contacts and appointments over the air) but does not sync the local contacts and appointments.
If I split the accounts into two profiles and set the profile with the pop account as the default profile then I get the local contacts, but having to swap between profiles is a pain.
Can anybody help?

You don't need to access your e-mail account, just get into your Apple account and change the e-mail address. If you can't access your Apple account, then you have a bigger issue to contend with.

Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

Saving signature in the profile...

Similar Messages

Maybe you are looking for