Saving source code
Hi Experts,
is there any possibility to save the source code with 1 step? (E.g. main program in one file, includes in another file(s), etc...)
So I would like to save the main program and every subroutines that belongs to it into one or different TXT files "with 1 click"!
Thx in advance.
I think you need to write a small utility for this
report zaRs
no standard page heading
line-size 95 .
perform f_get_pgm.
if not i_include[] is initial.
clear v_index.
loop at i_include into wa_include
clear : i_pgm.
refresh : i_pgm.
read report wa_include-txt into i_pgm.
if sy-subrc eq 0.
v_date = sy-datum.
v_time = sy-uzeit.
concatenate 'C:Backup_' v_date '_' v_time into v_file.
call function 'WS_DOWNLOAD'
exporting
filename = v_file
filetype = 'ASC'
mode = 'A'
tables
data_tab = i_pgm.
endif.
endloop.
endif.
form f_get_pgm.
call function 'RFC_READ_REPORT'
exporting
program = p_rname
tables
qtab = i_pgm.
describe table i_pgm lines v_lines1.
wa_include-txt = p_rname.
append wa_include to i_include.
if not i_pgm[] is initial.
clear v_index.
loop at i_pgm into wa_pgm.
v_index = sy-tabix.
translate wa_pgm to upper case.
split wa_pgm-txt at '"' into wa_pgm-txt v_comment.
if wa_pgm-txt(1) ne '*' and
wa_pgm-txt cs 'INCLUDE'.
replace '.' with space into wa_pgm-txt.
condense wa_pgm-txt .
split wa_pgm-txt at space into v_comment v_comment1.
move v_comment1 to wa_include.
append wa_include to i_include.
endif.
endloop.
else.
message i001 with text-001.
endif.
clear v_index.
if not i_include[] is initial.
loop at i_include into wa_include.
v_index = sy-tabix.
select obj_name from tadir
into tadir-obj_name
up to 1 rows
where obj_name eq wa_include-txt
and pgmid eq 'R3TR'
and object eq 'PROG'.
endselect.
if sy-subrc ne 0.
delete i_include index v_index.
endif.
endloop.
endif.
endform. " f_get_pgm
a®
Similar Messages
-
Unwanted source code appears in browser but not in Dreamweaver Code Window
I am using templates and css, and Dreamweaver to build a new website of about 20 pages. With the first several pages, everything was working well. Then as I continued to add pages, I started to notice some code appearing at the bottom of web pages (under the footer), and then, a page duplicating the footer, and then, the drop-down function on the index page not working (pulls down and pops right back up) while headers on other pages work fine. I viewed the source code in the browsers (IE and Firefox) and I see the extra code at the bottom. However, this code doesn't show up in Dreamweaver, or, when I open the files in Notepad.
Following is an example of the different bottom-most lines of code in the Firefox browser compared to what I see in Dreamweaver or Notepad (note the highlighted line that is not showing up in Notepad or Dreamweaver).
Firefox Browser:
</div>
</div>
<div class="clear"></div>
</div>
</div>
</div>
<!-- InstanceEndEditable --><script src="http://brandbar.oit.duke.edu/footer/videos_podcasts_full.php" type="text/javascript"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/header/js/jquery.min.js"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/header/js/globalHeader.js"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/footer/js/footer.js"></script>
</body>
<!-- InstanceEnd --></html>ript>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/footer/js/footer.js"></script>
</body>
<!-- InstanceEnd --></html>
Notepad or Dreamweaver code screen:
</div>
</div>
<div class="clear"></div>
</div>
</div>
</div>
<!-- InstanceEndEditable --><script src="http://brandbar.oit.duke.edu/footer/videos_podcasts_full.php" type="text/javascript"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/header/js/jquery.min.js"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/header/js/globalHeader.js"></script>
<script type="text/javascript" src="http://brandbar.oit.duke.edu/footer/js/footer.js"></script>
</body>
<!-- InstanceEnd --></html>this answer is a bit late, but i think i have figured this problem out and it is probably still bugging someone out there.
i was having the same issues through many dreamweaver upgrades and kept running into the same problem (only on my Mac though - PC never gave me trouble). anyway, my hard drive recently died and i had a brand new one installed and then i installed a fresh version of CS5. started building a page and ran into the same problem. now that this is happening on a new drive with a fresh OS and reinstalled software, i needed to look elsewhere.
the problem is so simple you will more than likely cry at the amount of time you have wasted on it. more than likely if this is happening to you, you are working off of a network drive or a server. all my files are stored on a server locally, so when i make a change it is saving to the server. either a bad or slow connection to the server and/or a server going bad will cause this issue.
take the same file that you are having problems with and save down to your desktop - then preview in a browser. so the solution is to build the entire site on your local drive and then FTP up to the live site when complete.
hope this helps. -
Upload and Download ABAP Source Code
This is a program that I have had kicking around for a couple of years in various incarnations.
Source Code Listing
Report: ZKBPROGS *
Function : Up/Download ABAP reports complete with texts *
- this program does not update TRDIR with the *
TRDIR entries that are in the program uploaded. Instead, *
current users stats are used. *
- this program allows selection of reports from a list or *
a single report can be tuped in and uploaded *
- this program also updates TADIR so that a development class*
is assigned to the program *
- this program checks to see if the program already has a *
TRDIR entry, and if it does, warns the user *
- this program will save/restore the program documenation too*
REPORT ZKBPROGS
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Declare Database Objects *
tables:
DOKIL,
TRDIR.
Constants*
CONSTANTS:
MC_TRDIR_IDENTIFIER(72) TYPE C VALUE '%&%& RDIR',
MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
MC_TEXT_IDENTIFIER(72) TYPE C VALUE '%&%& TEXP',
MC_THEAD_IDENTIFIER(72) TYPE C VALUE '%&%& HEAD',
MC_DOC_IDENTIFIER(72) TYPE C VALUE '%&%& DOKL',
MC_TRDIR_SHORT(4) TYPE C VALUE 'RDIR',
MC_REPORT_SHORT(4) TYPE C VALUE 'REPO',
MC_TEXT_SHORT(4) TYPE C VALUE 'TEXP',
MC_THEAD_SHORT(4) TYPE C VALUE 'HEAD',
MC_DOC_SHORT(4) TYPE C VALUE 'DOKP'.
Declare Module level data structures *
DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
LINE(72) TYPE C,
END OF MTAB_PROGRAM_SOURCE.
DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
DATA: MSTR_THEAD LIKE THEAD.
DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
LINE(275) TYPE C,
END OF MTAB_PROGRAM_FILE.
DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
NAME LIKE TRDIR-NAME,
DESC(72) TYPE C,
SAVENAME LIKE RLGRAP-FILENAME,
END OF MTAB_DIRECTORY.
DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
LINE(255) TYPE C,
END OF MTAB_PROGRAM_DOCUMENTATION.
Selection Screen *
*-- Options for upload/download of programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
PARAMETERS:
RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'. " Download reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
SELECT-OPTIONS:
S_NAME FOR TRDIR-NAME, " Program Name
S_SUBC FOR TRDIR-SUBC " Program Type
DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
S_CNAM FOR TRDIR-CNAM " Created by
DEFAULT SY-UNAME,
S_UNAM FOR TRDIR-UNAM, " Last Changed by
S_CDAT FOR TRDIR-CDAT, " Creation date
S_UDAT FOR TRDIR-UDAT. " Last update date
SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
*-- Options for uploading programs
PARAMETERS:
RB_UP RADIOBUTTON GROUP UDL. " Upload reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
PARAMETERS:
RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
RB_LIST RADIOBUTTON GROUP HOW.
SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
*-- Options for up/downloading programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
PARAMETERS:
RB_DOS RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
RB_UNIX RADIOBUTTON GROUP FIL, " Save to UNIX
P_PATH LIKE RLGRAP-FILENAME " Path to save files to
DEFAULT 'c:\temp\'.
SELECTION-SCREEN END OF BLOCK FRM_FILEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-LOW
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-LOW
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-HIGH
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-HIGH
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
PERFORM GET_NAME USING 'S_UNAM-LOW'
CHANGING S_UNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
PERFORM GET_NAME USING 'S_UNAM-HIGH'
CHANGING S_UNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
PERFORM GET_NAME USING 'S_CNAM-LOW'
CHANGING S_CNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
PERFORM GET_NAME USING 'S_CNAM-HIGH'
CHANGING S_CNAM-HIGH.
TOP-OF-PAGE.
IF RB_LIST = 'X'.
FORMAT COLOR COL_HEADING.
NEW-LINE.
WRITE: AT 3 TEXT-H01,
AT 15 TEXT-H03.
FORMAT COLOR OFF.
ENDIF.
AT LINE-SELECTION.
CHECK RB_LIST = 'X'. " only do in list mode
READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING MTAB_DIRECTORY-SAVENAME.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
Start of processing *
START-OF-SELECTION.
FORMAT COLOR COL_NORMAL.
IF RB_DOWN = 'X'.
PERFORM DOWNLOAD_REPORTS.
ELSEIF RB_UP = 'X'.
PERFORM UPLOAD_REPORTS.
ENDIF.
END-OF-SELECTION.
IF RB_DOWN = 'X'.
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
USING P_PATH.
ENDIF.
FORM UPLOAD_REPORTS *
FORM UPLOAD_REPORTS.
*-- Can upload a reports entered in selection criteria or
*-- select from a list. List can be from index.txt in same directory
*-- (created by the download) or by reading the first line of each file
*-- in the directory.
IF RB_FILE = 'X'. " Upload single program from a file
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING P_PATH.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
ELSEIF RB_LIST = 'X'. " Show list for user to choose from
*-- get list of report names/descriptions from directory text
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
USING P_PATH.
SORT MTAB_DIRECTORY.
*-- Write out list of report names/descriptions
LOOP AT MTAB_DIRECTORY.
WRITE:
/ MTAB_DIRECTORY-NAME UNDER TEXT-H01,
MTAB_DIRECTORY-DESC UNDER TEXT-H03,
MTAB_DIRECTORY-SAVENAME.
ENDLOOP.
*-- Process user selections for reports to upload.
ENDIF.
ENDFORM. " upload_reports
FORM DOWNLOAD_REPORTS *
From the user selections, get all programs that meet the *
criteria, and save them in ftab_program_directory. *
Also save the report to disk. *
FORM DOWNLOAD_REPORTS.
DATA:
LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
*-- The table is put into an internal table because the program will
*-- abend if multiple transfers to a dataset occur within a SELECT/
*-- ENDSELCT (tested on 3.1H)
SELECT * FROM TRDIR
INTO TABLE MTAB_PROGRAM_TRDIR
WHERE NAME IN S_NAME
AND SUBC IN S_SUBC
AND CNAM IN S_CNAM
AND UNAM IN S_UNAM
AND CDAT IN S_CDAT
AND UDAT IN S_UDAT.
LOOP AT MTAB_PROGRAM_TRDIR.
*-- Clear out text and source code tables
CLEAR:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
REFRESH:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
*-- Get the report
READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
*-- Get the text for the report
READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
*-- Get the documentation for the report
CLEAR DOKIL.
SELECT * UP TO 1 ROWS FROM DOKIL
WHERE ID = 'RE'
AND OBJECT = MTAB_PROGRAM_TRDIR-NAME
AND LANGU = SY-LANGU
AND TYP = 'E'
ORDER BY VERSION DESCENDING.
ENDSELECT.
*-- Documentation exists for this object
IF SY-SUBRC = 0.
CALL FUNCTION 'DOCU_READ'
EXPORTING
ID = DOKIL-ID
LANGU = DOKIL-LANGU
OBJECT = DOKIL-OBJECT
TYP = DOKIL-TYP
VERSION = DOKIL-VERSION
IMPORTING
HEAD = MSTR_THEAD
TABLES
LINE = MTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ENDIF.
*-- Put the report code and texts into a single file
*-- Put the identifier line in so that the start of the TRDIR line
*-- is marked
CONCATENATE MC_TRDIR_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the TRDIR line
MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report code
*-- is marked
CONCATENATE MC_REPORT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report code
LOOP AT MTAB_PROGRAM_SOURCE.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the report text
*-- is marked
CONCATENATE MC_TEXT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report texts
LOOP AT MTAB_PROGRAM_TEXTS.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the THEAD record
*-- is marked
CONCATENATE MC_THEAD_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
MTAB_PROGRAM_FILE = MSTR_THEAD.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report
*-- documentation is marked
CONCATENATE MC_DOC_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report documentation
LOOP AT MTAB_PROGRAM_DOCUMENTATION.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Make the fully pathed filename that report will be saved to
CONCATENATE P_PATH
MTAB_PROGRAM_TRDIR-NAME
'.txt'
INTO LC_FULL_FILENAME.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
USING LC_FULL_FILENAME.
*-- Write out message with Program Name/Description
READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
IF SY-SUBRC = 0.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME,
MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
ELSE.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = 'No description available'.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME.
ENDIF.
ENDLOOP.
ENDFORM. " BUILD_PROGRAM_DIRECTORY
FORM SAVE_TABLE_TO_FILE *
--> FTAB_TABLE *
--> F_FILENAME *
FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
USING F_FILENAME.
IF RB_DOS = 'X'. " Save file to presentation server
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
OTHERS = 4.
IF SY-SUBRC NE 0.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ELSE. " Save file to application server
OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC = 0.
LOOP AT FTAB_TABLE.
TRANSFER FTAB_TABLE TO F_FILENAME.
IF SY-SUBRC NE 0.
WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDLOOP.
ELSE.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDIF. " End RB_DOS
ENDFORM. " SAVE_PROGRAM
FORM READ_REPORT_FROM_DISK *
Read report into internal table. Can read from local or *
remote computer *
FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
USING F_FILENAME.
DATA:
LC_MESSAGE(128) TYPE C.
CLEAR FTAB_TABLE.
REFRESH FTAB_TABLE.
IF RB_DOS = 'X'.
TRANSLATE F_FILENAME USING '/\'. " correct slash for Dos PC file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
IF SY-SUBRC >< 0.
WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
ENDIF.
ELSEIF RB_UNIX = 'X'.
TRANSLATE F_FILENAME USING '\/'. " correct slash for unix
OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET F_FILENAME INTO FTAB_TABLE.
IF SY-SUBRC = 0.
APPEND FTAB_TABLE.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET F_FILENAME.
ELSE.
WRITE: / 'Error reading file from remote computer'
COLOR COL_NEGATIVE,
/ LC_MESSAGE,
/ F_FILENAME.
SY-SUBRC = 4.
ENDIF.
ENDIF.
ENDFORM. " READ_REPORT_FROM_DISK
FORM SPLIT_INCOMING_FILE *
--> FTAB_PROGRAM_FILE *
--> FTAB_PROGRAM_SOURCE *
--> ` *
--> FTAB_PROGRAM_TEXTS *
FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
STRUCTURE MTAB_PROGRAM_FILE
FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
CHANGING FSTR_TRDIR
FSTR_THEAD.
DATA:
LC_DATATYPE(4) TYPE C, " Type of data, REPO, TEXP, RDIR
LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
LOOP AT FTAB_PROGRAM_FILE.
LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
CASE LC_PROGRAM_FILE(9).
WHEN MC_TRDIR_IDENTIFIER.
LC_DATATYPE = MC_TRDIR_SHORT.
WHEN MC_REPORT_IDENTIFIER.
LC_DATATYPE = MC_REPORT_SHORT.
WHEN MC_TEXT_IDENTIFIER.
LC_DATATYPE = MC_TEXT_SHORT.
WHEN MC_DOC_IDENTIFIER.
LC_DATATYPE = MC_DOC_SHORT.
WHEN MC_THEAD_IDENTIFIER.
LC_DATATYPE = MC_THEAD_SHORT.
WHEN OTHERS. " Actual contents of report, trdir, or text
CASE LC_DATATYPE.
WHEN MC_TRDIR_SHORT.
FSTR_TRDIR = FTAB_PROGRAM_FILE.
WHEN MC_REPORT_SHORT.
FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_SOURCE.
WHEN MC_TEXT_SHORT.
FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_TEXTS.
WHEN MC_THEAD_SHORT.
FSTR_THEAD = FTAB_PROGRAM_FILE.
WHEN MC_DOC_SHORT.
FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_DOCUMENTATION.
ENDCASE.
ENDCASE.
ENDLOOP.
ENDFORM. " SPLIT_INCOMING_FILE
FORM INSERT_NEW_REPORT*
--> FTAB_PROGRAM_SOURCE *
--> FTAB_PROGRAM_TEXTS *
--> F_TRDIR *
FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
USING FSTR_TRDIR LIKE TRDIR
FSTR_THEAD LIKE MSTR_THEAD.
DATA:
LC_OBJ_NAME LIKE E071-OBJ_NAME,
LC_LINE2(40) TYPE C,
LC_ANSWER(1) TYPE C.
*-- read trdir to see if the report already exists, if it does, prompt
*-- user to overwrite or abort.
SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
IF SY-SUBRC = 0. " Already exists
CONCATENATE 'want to overwrite report'
FSTR_TRDIR-NAME
INTO LC_LINE2 SEPARATED BY SPACE.
CONCATENATE LC_LINE2
INTO LC_LINE2.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = 'The selected report already exists, do you'
TEXTLINE2 = LC_LINE2
TITEL = 'Report already exists'
CANCEL_DISPLAY = SPACE
IMPORTING
ANSWER = LC_ANSWER
EXCEPTIONS
OTHERS = 1.
ELSE.
LC_ANSWER = 'J'.
ENDIF.
IF LC_ANSWER = 'J'.
*-- Create the TADIR entry. (TRDIR entry created by INSERT REPORT)
LC_OBJ_NAME = TRDIR-NAME.
CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
EXPORTING
WI_E071_PGMID = 'R3TR'
WI_E071_OBJECT = 'PROG'
WI_E071_OBJ_NAME = LC_OBJ_NAME
WI_TADIR_DEVCLASS = '$TMP'
EXCEPTIONS
EXIT = 3
OTHERS = 4.
IF SY-SUBRC = 0.
*-- Create Report
INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
*-- Create Texts
INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
LANGUAGE SY-LANGU.
*-- Save Documentation
CALL FUNCTION 'DOCU_UPDATE'
EXPORTING
HEAD = FSTR_THEAD
STATE = 'A'
TYP = 'E'
VERSION = '1'
TABLES
LINE = FTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
FSTR_TRDIR-NAME, 'was not loaded into SAP.'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ELSE.
WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
'was not uploaded into SAP. Action cancelled by user'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ENDFORM. " INSERT_NEW_REPORT
FORM GET_NAME *
--> VALUE(F_FIELD) *
--> F_NAME *
FORM GET_NAME USING VALUE(F_FIELD)
CHANGING F_NAME.
DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LC_PROG LIKE D020S-PROG,
LC_DNUM LIKE D020S-DNUM.
TRANSLATE F_FIELD TO UPPER CASE.
refresh ltab_fields.
LTAB_FIELDS-FIELDNAME = F_FIELD.
append ltab_fields.
LC_PROG = SY-REPID .
LC_DNUM = SY-DYNNR .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LC_PROG
DYNUMB = LC_DNUM
TABLES
dynpfields = ltab_fields
EXCEPTIONS
OTHERS = 01.
read table ltab_fields index 1.
IF SY-SUBRC EQ 0.
F_NAME = LTAB_FIELDS-FIELDVALUE.
refresh ltab_fields.
ENDIF.
CALL FUNCTION 'F4_USER'
EXPORTING
OBJECT = F_NAME
IMPORTING
RESULT = F_NAME.
ENDFORM. " GET_NAME
Program Texts
DIR File Download Options (File Selection)
FIL File Options
FNA Enter filename below (under File Options)
H01 Prog Name
H03 Program Description
SNG Upload a single file
UDL Upload to SAP/Download from SAP
UPL File Upload Options
R Backup/Restore program source code with texts
P_PATH Path to save programs to
RB_DOS Files on local computer
RB_DOWN Download Programs
RB_FILE Upload a single file
RB_LIST Select program(s) from a list
RB_UNIX Files on remote computer
RB_UP Upload Programs to SAP
S_CDAT Date Created
S_CNAM Created by UserID
S_NAME Program Name
S_SUBC Program Type
S_UDAT Date Changed
S_UNAM Last Changed by UserIDHi
you can use SAPLink for this
http://code.google.com/p/saplink/
Abhi -
Source code jumps around when re-opening page?
Is the following a common problem with Dreamwver CS4 Source Code view?
In an effort to make the code read nice and neat, like everyone else I try to indent and nest my code. For example:
<div>
<ul>
<li>one</li>
<li>one</li>
<li>one</li>
</ul>
</div>
But, upon saving a file and then later reopening it, I notice that in places the file does not keep my intended spaced nested layout i.e. the code jumps around on a line and I lose my neat indent spacing. For example:
<div>
<ul>
<li>one</li>
<li>one</li>
<li>one</li>
</ul>
</div>
I have tried to set my preferences > code format > tab size to 10 to produce a larger indent which has improved the problem a little but not fixed it.
Others must have experienced this frustrating problem.
Is there anything I can do to fix it, like set further preferences to give me complete control over the page?
Thanks in advance.Oh can it? I will look into this thanks Ken.
With regards the CSS, I found out about it on Lynda.com training videos.
- Dreamweaver CS4 with CSS Essential Training > Chapter 13: Testing and Deploying CSS > Formatting code for deployment
The process is as follows:
On Dreamweaver CS4 click Edit > Preferences > Code Format > CSS (button)
On the CSS Source Format Options screen, de-select the "Each property on a seperate line" check box and click "OK" and then "OK".
Then on your CSS page, in the left side panel, click "Format Source Code" and the "Apply Source Formatting" selection.
The code will then condense for deployment.
You can reverse the process just as easily going backwards.
If anyone else has any ideas on code jumping around on a line please do let me know. Thanks. -
Hi,
I am trying to save some rather lengthy CF codes in a variable, ie. <cfset mycode = " ... all the codes here ...">. However the codes to be saved may contain double quotes (") which would create a conflict. I know of cfsavecontent which does not require double quotes; however that tag would process the codes rather than save them as string.
Is there an alternative way to saving the codes as a string in a variable?
Thanks,
MCLFor some reasons, I wasn't able to save this input into a variable. I ended up having to save them in a file and call it as a template using cfinclude.
Code needs to be compiled before it's executed, and the compile process runs before the code is run. So one cannot have runtime expressions that write code and then have the expectation of it then being able to be executed within the same template.
As Dan alludes to, the only way of doing what you want to do is to write the source code to file, then <cfinclude> the file. Including an file that has not yet been compiled will trigger the compilation process before executing it, so your "runtime" code will indeed execute.
Adam -
Recommended folder for source code?
Hi,
I upgraded to OSX Lion - which was only possible after erasing everything on my system. Since I now start up with with a 'clean' account, I wanted to take the opportunity to optimize my source code organisation.
Since my sources are really checked out from an online repository, I don't think I should keep them in the Documents folder but rather in some other folder, like Users/guy/Development. Does this make sense? Any thoughts or experiences from other developers here?
Thanks
GuySorry, it doesn't make sense to ask about saving in a local folder when you claim they sit in a remote location...
Whatever the location, as long as it is backed up reliably, you'll be fine. -
How to Upload Program Source Code
Hello,
i have a program which downloads the source code into text files.
I need to create all these into another server.
so i need a program to upload these programs.
Any idea how to it? Thanks in advance.
Thanks&Regards,
Sayanna DamerlaTry this custom code:
Upload and Download ABAP Source Code
Source Code Listing
Report: ZKBPROGS *
Function : Up/Download ABAP reports complete with texts *
- this program does not update TRDIR with the *
TRDIR entries that are in the program uploaded. Instead, *
current users stats are used. *
- this program allows selection of reports from a list or *
a single report can be tuped in and uploaded *
- this program also updates TADIR so that a development class*
is assigned to the program *
- this program checks to see if the program already has a *
TRDIR entry, and if it does, warns the user *
- this program will save/restore the program documenation too*
REPORT ZKBPROGS
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Declare Database Objects *
tables:
DOKIL,
TRDIR.
Constants*
CONSTANTS:
MC_TRDIR_IDENTIFIER(72) TYPE C VALUE '%&%& RDIR',
MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
MC_TEXT_IDENTIFIER(72) TYPE C VALUE '%&%& TEXP',
MC_THEAD_IDENTIFIER(72) TYPE C VALUE '%&%& HEAD',
MC_DOC_IDENTIFIER(72) TYPE C VALUE '%&%& DOKL',
MC_TRDIR_SHORT(4) TYPE C VALUE 'RDIR',
MC_REPORT_SHORT(4) TYPE C VALUE 'REPO',
MC_TEXT_SHORT(4) TYPE C VALUE 'TEXP',
MC_THEAD_SHORT(4) TYPE C VALUE 'HEAD',
MC_DOC_SHORT(4) TYPE C VALUE 'DOKP'.
Declare Module level data structures *
DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
LINE(72) TYPE C,
END OF MTAB_PROGRAM_SOURCE.
DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
DATA: MSTR_THEAD LIKE THEAD.
DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
LINE(275) TYPE C,
END OF MTAB_PROGRAM_FILE.
DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
NAME LIKE TRDIR-NAME,
DESC(72) TYPE C,
SAVENAME LIKE RLGRAP-FILENAME,
END OF MTAB_DIRECTORY.
DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
LINE(255) TYPE C,
END OF MTAB_PROGRAM_DOCUMENTATION.
Selection Screen *
*-- Options for upload/download of programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
PARAMETERS:
RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'. " Download reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
SELECT-OPTIONS:
S_NAME FOR TRDIR-NAME, " Program Name
S_SUBC FOR TRDIR-SUBC " Program Type
DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
S_CNAM FOR TRDIR-CNAM " Created by
DEFAULT SY-UNAME,
S_UNAM FOR TRDIR-UNAM, " Last Changed by
S_CDAT FOR TRDIR-CDAT, " Creation date
S_UDAT FOR TRDIR-UDAT. " Last update date
SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
*-- Options for uploading programs
PARAMETERS:
RB_UP RADIOBUTTON GROUP UDL. " Upload reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
PARAMETERS:
RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
RB_LIST RADIOBUTTON GROUP HOW.
SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
*-- Options for up/downloading programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
PARAMETERS:
RB_DOS RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
RB_UNIX RADIOBUTTON GROUP FIL, " Save to UNIX
P_PATH LIKE RLGRAP-FILENAME " Path to save files to
DEFAULT 'c:\temp\'.
SELECTION-SCREEN END OF BLOCK FRM_FILEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-LOW
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-LOW
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-HIGH
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-HIGH
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
PERFORM GET_NAME USING 'S_UNAM-LOW'
CHANGING S_UNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
PERFORM GET_NAME USING 'S_UNAM-HIGH'
CHANGING S_UNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
PERFORM GET_NAME USING 'S_CNAM-LOW'
CHANGING S_CNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
PERFORM GET_NAME USING 'S_CNAM-HIGH'
CHANGING S_CNAM-HIGH.
TOP-OF-PAGE.
IF RB_LIST = 'X'.
FORMAT COLOR COL_HEADING.
NEW-LINE.
WRITE: AT 3 TEXT-H01,
AT 15 TEXT-H03.
FORMAT COLOR OFF.
ENDIF.
AT LINE-SELECTION.
CHECK RB_LIST = 'X'. " only do in list mode
READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING MTAB_DIRECTORY-SAVENAME.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
Start of processing *
START-OF-SELECTION.
FORMAT COLOR COL_NORMAL.
IF RB_DOWN = 'X'.
PERFORM DOWNLOAD_REPORTS.
ELSEIF RB_UP = 'X'.
PERFORM UPLOAD_REPORTS.
ENDIF.
END-OF-SELECTION.
IF RB_DOWN = 'X'.
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
USING P_PATH.
ENDIF.
FORM UPLOAD_REPORTS *
FORM UPLOAD_REPORTS.
*-- Can upload a reports entered in selection criteria or
*-- select from a list. List can be from index.txt in same directory
*-- (created by the download) or by reading the first line of each file
*-- in the directory.
IF RB_FILE = 'X'. " Upload single program from a file
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING P_PATH.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
ELSEIF RB_LIST = 'X'. " Show list for user to choose from
*-- get list of report names/descriptions from directory text
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
USING P_PATH.
SORT MTAB_DIRECTORY.
*-- Write out list of report names/descriptions
LOOP AT MTAB_DIRECTORY.
WRITE:
/ MTAB_DIRECTORY-NAME UNDER TEXT-H01,
MTAB_DIRECTORY-DESC UNDER TEXT-H03,
MTAB_DIRECTORY-SAVENAME.
ENDLOOP.
*-- Process user selections for reports to upload.
ENDIF.
ENDFORM. " upload_reports
FORM DOWNLOAD_REPORTS *
From the user selections, get all programs that meet the *
criteria, and save them in ftab_program_directory. *
Also save the report to disk. *
FORM DOWNLOAD_REPORTS.
DATA:
LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
*-- The table is put into an internal table because the program will
*-- abend if multiple transfers to a dataset occur within a SELECT/
*-- ENDSELCT (tested on 3.1H)
SELECT * FROM TRDIR
INTO TABLE MTAB_PROGRAM_TRDIR
WHERE NAME IN S_NAME
AND SUBC IN S_SUBC
AND CNAM IN S_CNAM
AND UNAM IN S_UNAM
AND CDAT IN S_CDAT
AND UDAT IN S_UDAT.
LOOP AT MTAB_PROGRAM_TRDIR.
*-- Clear out text and source code tables
CLEAR:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
REFRESH:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
*-- Get the report
READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
*-- Get the text for the report
READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
*-- Get the documentation for the report
CLEAR DOKIL.
SELECT * UP TO 1 ROWS FROM DOKIL
WHERE ID = 'RE'
AND OBJECT = MTAB_PROGRAM_TRDIR-NAME
AND LANGU = SY-LANGU
AND TYP = 'E'
ORDER BY VERSION DESCENDING.
ENDSELECT.
*-- Documentation exists for this object
IF SY-SUBRC = 0.
CALL FUNCTION 'DOCU_READ'
EXPORTING
ID = DOKIL-ID
LANGU = DOKIL-LANGU
OBJECT = DOKIL-OBJECT
TYP = DOKIL-TYP
VERSION = DOKIL-VERSION
IMPORTING
HEAD = MSTR_THEAD
TABLES
LINE = MTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ENDIF.
*-- Put the report code and texts into a single file
*-- Put the identifier line in so that the start of the TRDIR line
*-- is marked
CONCATENATE MC_TRDIR_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the TRDIR line
MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report code
*-- is marked
CONCATENATE MC_REPORT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report code
LOOP AT MTAB_PROGRAM_SOURCE.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the report text
*-- is marked
CONCATENATE MC_TEXT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report texts
LOOP AT MTAB_PROGRAM_TEXTS.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the THEAD record
*-- is marked
CONCATENATE MC_THEAD_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
MTAB_PROGRAM_FILE = MSTR_THEAD.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report
*-- documentation is marked
CONCATENATE MC_DOC_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report documentation
LOOP AT MTAB_PROGRAM_DOCUMENTATION.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Make the fully pathed filename that report will be saved to
CONCATENATE P_PATH
MTAB_PROGRAM_TRDIR-NAME
'.txt'
INTO LC_FULL_FILENAME.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
USING LC_FULL_FILENAME.
*-- Write out message with Program Name/Description
READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
IF SY-SUBRC = 0.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME,
MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
ELSE.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = 'No description available'.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME.
ENDIF.
ENDLOOP.
ENDFORM. " BUILD_PROGRAM_DIRECTORY
FORM SAVE_TABLE_TO_FILE *
--> FTAB_TABLE *
--> F_FILENAME *
FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
USING F_FILENAME.
IF RB_DOS = 'X'. " Save file to presentation server
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
OTHERS = 4.
IF SY-SUBRC NE 0.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ELSE. " Save file to application server
OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC = 0.
LOOP AT FTAB_TABLE.
TRANSFER FTAB_TABLE TO F_FILENAME.
IF SY-SUBRC NE 0.
WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDLOOP.
ELSE.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDIF. " End RB_DOS
ENDFORM. " SAVE_PROGRAM
FORM READ_REPORT_FROM_DISK *
Read report into internal table. Can read from local or *
remote computer *
FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
USING F_FILENAME.
DATA:
LC_MESSAGE(128) TYPE C.
CLEAR FTAB_TABLE.
REFRESH FTAB_TABLE.
IF RB_DOS = 'X'.
TRANSLATE F_FILENAME USING '/\'. " correct slash for Dos PC file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
IF SY-SUBRC >< 0.
WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
ENDIF.
ELSEIF RB_UNIX = 'X'.
TRANSLATE F_FILENAME USING '\/'. " correct slash for unix
OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET F_FILENAME INTO FTAB_TABLE.
IF SY-SUBRC = 0.
APPEND FTAB_TABLE.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET F_FILENAME.
ELSE.
WRITE: / 'Error reading file from remote computer'
COLOR COL_NEGATIVE,
/ LC_MESSAGE,
/ F_FILENAME.
SY-SUBRC = 4.
ENDIF.
ENDIF.
ENDFORM. " READ_REPORT_FROM_DISK
FORM SPLIT_INCOMING_FILE *
--> FTAB_PROGRAM_FILE *
--> FTAB_PROGRAM_SOURCE *
--> ` *
--> FTAB_PROGRAM_TEXTS *
FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
STRUCTURE MTAB_PROGRAM_FILE
FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
CHANGING FSTR_TRDIR
FSTR_THEAD.
DATA:
LC_DATATYPE(4) TYPE C, " Type of data, REPO, TEXP, RDIR
LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
LOOP AT FTAB_PROGRAM_FILE.
LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
CASE LC_PROGRAM_FILE(9).
WHEN MC_TRDIR_IDENTIFIER.
LC_DATATYPE = MC_TRDIR_SHORT.
WHEN MC_REPORT_IDENTIFIER.
LC_DATATYPE = MC_REPORT_SHORT.
WHEN MC_TEXT_IDENTIFIER.
LC_DATATYPE = MC_TEXT_SHORT.
WHEN MC_DOC_IDENTIFIER.
LC_DATATYPE = MC_DOC_SHORT.
WHEN MC_THEAD_IDENTIFIER.
LC_DATATYPE = MC_THEAD_SHORT.
WHEN OTHERS. " Actual contents of report, trdir, or text
CASE LC_DATATYPE.
WHEN MC_TRDIR_SHORT.
FSTR_TRDIR = FTAB_PROGRAM_FILE.
WHEN MC_REPORT_SHORT.
FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_SOURCE.
WHEN MC_TEXT_SHORT.
FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_TEXTS.
WHEN MC_THEAD_SHORT.
FSTR_THEAD = FTAB_PROGRAM_FILE.
WHEN MC_DOC_SHORT.
FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_DOCUMENTATION.
ENDCASE.
ENDCASE.
ENDLOOP.
ENDFORM. " SPLIT_INCOMING_FILE
FORM INSERT_NEW_REPORT*
--> FTAB_PROGRAM_SOURCE *
--> FTAB_PROGRAM_TEXTS *
--> F_TRDIR *
FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
USING FSTR_TRDIR LIKE TRDIR
FSTR_THEAD LIKE MSTR_THEAD.
DATA:
LC_OBJ_NAME LIKE E071-OBJ_NAME,
LC_LINE2(40) TYPE C,
LC_ANSWER(1) TYPE C.
*-- read trdir to see if the report already exists, if it does, prompt
*-- user to overwrite or abort.
SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
IF SY-SUBRC = 0. " Already exists
CONCATENATE 'want to overwrite report'
FSTR_TRDIR-NAME
INTO LC_LINE2 SEPARATED BY SPACE.
CONCATENATE LC_LINE2
INTO LC_LINE2.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = 'The selected report already exists, do you'
TEXTLINE2 = LC_LINE2
TITEL = 'Report already exists'
CANCEL_DISPLAY = SPACE
IMPORTING
ANSWER = LC_ANSWER
EXCEPTIONS
OTHERS = 1.
ELSE.
LC_ANSWER = 'J'.
ENDIF.
IF LC_ANSWER = 'J'.
*-- Create the TADIR entry. (TRDIR entry created by INSERT REPORT)
LC_OBJ_NAME = TRDIR-NAME.
CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
EXPORTING
WI_E071_PGMID = 'R3TR'
WI_E071_OBJECT = 'PROG'
WI_E071_OBJ_NAME = LC_OBJ_NAME
WI_TADIR_DEVCLASS = '$TMP'
EXCEPTIONS
EXIT = 3
OTHERS = 4.
IF SY-SUBRC = 0.
*-- Create Report
INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
*-- Create Texts
INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
LANGUAGE SY-LANGU.
*-- Save Documentation
CALL FUNCTION 'DOCU_UPDATE'
EXPORTING
HEAD = FSTR_THEAD
STATE = 'A'
TYP = 'E'
VERSION = '1'
TABLES
LINE = FTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
FSTR_TRDIR-NAME, 'was not loaded into SAP.'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ELSE.
WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
'was not uploaded into SAP. Action cancelled by user'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ENDFORM. " INSERT_NEW_REPORT
FORM GET_NAME *
--> VALUE(F_FIELD) *
--> F_NAME *
FORM GET_NAME USING VALUE(F_FIELD)
CHANGING F_NAME.
DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LC_PROG LIKE D020S-PROG,
LC_DNUM LIKE D020S-DNUM.
TRANSLATE F_FIELD TO UPPER CASE.
refresh ltab_fields.
LTAB_FIELDS-FIELDNAME = F_FIELD.
append ltab_fields.
LC_PROG = SY-REPID .
LC_DNUM = SY-DYNNR .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LC_PROG
DYNUMB = LC_DNUM
TABLES
dynpfields = ltab_fields
EXCEPTIONS
OTHERS = 01.
read table ltab_fields index 1.
IF SY-SUBRC EQ 0.
F_NAME = LTAB_FIELDS-FIELDVALUE.
refresh ltab_fields.
ENDIF.
CALL FUNCTION 'F4_USER'
EXPORTING
OBJECT = F_NAME
IMPORTING
RESULT = F_NAME.
ENDFORM. " GET_NAME
Program Texts
DIR File Download Options (File Selection)
FIL File Options
FNA Enter filename below (under File Options)
H01 Prog Name
H03 Program Description
SNG Upload a single file
UDL Upload to SAP/Download from SAP
UPL File Upload Options
R Backup/Restore program source code with texts
P_PATH Path to save programs to
RB_DOS Files on local computer
RB_DOWN Download Programs
RB_FILE Upload a single file
RB_LIST Select program(s) from a list
RB_UNIX Files on remote computer
RB_UP Upload Programs to SAP
S_CDAT Date Created
S_CNAM Created by UserID
S_NAME Program Name
S_SUBC Program Type
S_UDAT Date Changed
S_UNAM Last Changed by UserID
Regards,
Joy. -
Source Code Longer Than Table --Dump. Wht to do?
Hi All,
I have created a Z-subrouitne pool and coded print program with Entry rountines for smartforms in it. When I tried to maintian the output control, stating the name of program and entry rountine of it, it is throwing dump while saving.
it is saying:
<b>The ABAP source code lines are longer than the width of the internal</b>
The detail is:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_READ_SRC_LINE_TOO_LONG',
was neither
caught nor passed along using a RAISING clause, in the procedure
"NAST_FORM_EXISTENCE_CHECK" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
You tried to read the program "SAPMZMM_PRINT" from the database. The READ
REPORT
statement allows you to copy a program's source code into an internal
table. The lines of source code must not be longer than the width of the
internal table. <b>The internal table is 72 characters wide. The source
code line is 87 wide. </b>
But I kept all the line (and re adjusted the longer one) within 72 char. the why am I facing this error? please suggest how to correct it.
Rewards point guranteed.
Anid.HI,
in order to be sure, open the abap editor and click Utilities->Settings and check Downward-Compat. Line Length (72). Then go to SAPMZMM_PRINT and do a pretty print or just activate it. This should be ok.
Kostas -
Report for downloading the source code of a Program
Hi.
Need a code to download the source code of a Program in a text file and all the includes of that program in a separate coressponding files. <b>This should be with scan and read report statements.It should be with classe CL_GUI_FRONTEND_SERVICES but not with function modules.</b>
Thanks in advance.
Regards,
AshaHi Asha
Use the below program for your purpose.
Report: ZKBPROGS *
Function : Up/Download ABAP reports complete with texts *
Change Log : *
July 5, 1999 *
- Combined existing programs that did the upload and download into*
- one program. *
- Changed format that the reports are saved in to be compatible *
with Wolfgang Morgenthaler's upload/download program(YSTRASN00 *
at www.antarcon.de). Major differences between this program and*
Wolfgang's are:
- this program does not update TRDIR with the *
TRDIR entries that are in the program uploaded. Instead, *
current users stats are used. *
- this program allows selection of reports from a list or *
a single report can be tuped in and uploaded *
- this program also updates TADIR so that a development class*
is assigned to the program *
- this program checks to see if the program already has a *
TRDIR entry, and if it does, warns the user *
- this program will save/restore the program documenation too*
REPORT ZKBPROGS
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Declare Database Objects *
tables:
DOKIL,
TRDIR.
Constants*
CONSTANTS:
MC_TRDIR_IDENTIFIER(72) TYPE C VALUE '%&%& RDIR',
MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
MC_TEXT_IDENTIFIER(72) TYPE C VALUE '%&%& TEXP',
MC_THEAD_IDENTIFIER(72) TYPE C VALUE '%&%& HEAD',
MC_DOC_IDENTIFIER(72) TYPE C VALUE '%&%& DOKL',
MC_TRDIR_SHORT(4) TYPE C VALUE 'RDIR',
MC_REPORT_SHORT(4) TYPE C VALUE 'REPO',
MC_TEXT_SHORT(4) TYPE C VALUE 'TEXP',
MC_THEAD_SHORT(4) TYPE C VALUE 'HEAD',
MC_DOC_SHORT(4) TYPE C VALUE 'DOKP'.
Declare Module level data structures *
DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
LINE(72) TYPE C,
END OF MTAB_PROGRAM_SOURCE.
DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
DATA: MSTR_THEAD LIKE THEAD.
DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
LINE(275) TYPE C,
END OF MTAB_PROGRAM_FILE.
DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
NAME LIKE TRDIR-NAME,
DESC(72) TYPE C,
SAVENAME LIKE RLGRAP-FILENAME,
END OF MTAB_DIRECTORY.
DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
LINE(255) TYPE C,
END OF MTAB_PROGRAM_DOCUMENTATION.
Selection Screen *
*-- Options for upload/download of programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
PARAMETERS:
RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'. " Download reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
SELECT-OPTIONS:
S_NAME FOR TRDIR-NAME, " Program Name
S_SUBC FOR TRDIR-SUBC " Program Type
DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
S_CNAM FOR TRDIR-CNAM " Created by
DEFAULT SY-UNAME,
S_UNAM FOR TRDIR-UNAM, " Last Changed by
S_CDAT FOR TRDIR-CDAT, " Creation date
S_UDAT FOR TRDIR-UDAT. " Last update date
SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
*-- Options for uploading programs
PARAMETERS:
RB_UP RADIOBUTTON GROUP UDL. " Upload reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
PARAMETERS:
RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
RB_LIST RADIOBUTTON GROUP HOW.
SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
*-- Options for up/downloading programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
PARAMETERS:
RB_DOS RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
RB_UNIX RADIOBUTTON GROUP FIL, " Save to UNIX
P_PATH LIKE RLGRAP-FILENAME " Path to save files to
DEFAULT 'c:\temp\'.
SELECTION-SCREEN END OF BLOCK FRM_FILEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-LOW
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-LOW
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-HIGH
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-HIGH
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
PERFORM GET_NAME USING 'S_UNAM-LOW'
CHANGING S_UNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
PERFORM GET_NAME USING 'S_UNAM-HIGH'
CHANGING S_UNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
PERFORM GET_NAME USING 'S_CNAM-LOW'
CHANGING S_CNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
PERFORM GET_NAME USING 'S_CNAM-HIGH'
CHANGING S_CNAM-HIGH.
TOP-OF-PAGE.
IF RB_LIST = 'X'.
FORMAT COLOR COL_HEADING.
NEW-LINE.
WRITE: AT 3 TEXT-H01,
AT 15 TEXT-H03.
FORMAT COLOR OFF.
ENDIF.
AT LINE-SELECTION.
CHECK RB_LIST = 'X'. " only do in list mode
READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING MTAB_DIRECTORY-SAVENAME.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
Start of processing *
START-OF-SELECTION.
FORMAT COLOR COL_NORMAL.
IF RB_DOWN = 'X'.
PERFORM DOWNLOAD_REPORTS.
ELSEIF RB_UP = 'X'.
PERFORM UPLOAD_REPORTS.
ENDIF.
END-OF-SELECTION.
IF RB_DOWN = 'X'.
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
USING P_PATH.
ENDIF.
FORM UPLOAD_REPORTS *
FORM UPLOAD_REPORTS.
*-- Can upload a reports entered in selection criteria or
*-- select from a list. List can be from index.txt in same directory
*-- (created by the download) or by reading the first line of each file
*-- in the directory.
IF RB_FILE = 'X'. " Upload single program from a file
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING P_PATH.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
ELSEIF RB_LIST = 'X'. " Show list for user to choose from
*-- get list of report names/descriptions from directory text
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
USING P_PATH.
SORT MTAB_DIRECTORY.
*-- Write out list of report names/descriptions
LOOP AT MTAB_DIRECTORY.
WRITE:
/ MTAB_DIRECTORY-NAME UNDER TEXT-H01,
MTAB_DIRECTORY-DESC UNDER TEXT-H03,
MTAB_DIRECTORY-SAVENAME.
ENDLOOP.
*-- Process user selections for reports to upload.
ENDIF.
ENDFORM. " upload_reports
FORM DOWNLOAD_REPORTS *
From the user selections, get all programs that meet the *
criteria, and save them in ftab_program_directory. *
Also save the report to disk. *
FORM DOWNLOAD_REPORTS.
DATA:
LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
*-- The table is put into an internal table because the program will
*-- abend if multiple transfers to a dataset occur within a SELECT/
*-- ENDSELCT (tested on 3.1H)
SELECT * FROM TRDIR
INTO TABLE MTAB_PROGRAM_TRDIR
WHERE NAME IN S_NAME
AND SUBC IN S_SUBC
AND CNAM IN S_CNAM
AND UNAM IN S_UNAM
AND CDAT IN S_CDAT
AND UDAT IN S_UDAT.
LOOP AT MTAB_PROGRAM_TRDIR.
*-- Clear out text and source code tables
CLEAR:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
REFRESH:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
*-- Get the report
READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
*-- Get the text for the report
READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
*-- Get the documentation for the report
CLEAR DOKIL.
SELECT * UP TO 1 ROWS FROM DOKIL
WHERE ID = 'RE'
AND OBJECT = MTAB_PROGRAM_TRDIR-NAME
AND LANGU = SY-LANGU
AND TYP = 'E'
ORDER BY VERSION DESCENDING.
ENDSELECT.
*-- Documentation exists for this object
IF SY-SUBRC = 0.
CALL FUNCTION 'DOCU_READ'
EXPORTING
ID = DOKIL-ID
LANGU = DOKIL-LANGU
OBJECT = DOKIL-OBJECT
TYP = DOKIL-TYP
VERSION = DOKIL-VERSION
IMPORTING
HEAD = MSTR_THEAD
TABLES
LINE = MTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ENDIF.
*-- Put the report code and texts into a single file
*-- Put the identifier line in so that the start of the TRDIR line
*-- is marked
CONCATENATE MC_TRDIR_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the TRDIR line
MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report code
*-- is marked
CONCATENATE MC_REPORT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report code
LOOP AT MTAB_PROGRAM_SOURCE.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the report text
*-- is marked
CONCATENATE MC_TEXT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report texts
LOOP AT MTAB_PROGRAM_TEXTS.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the THEAD record
*-- is marked
CONCATENATE MC_THEAD_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
MTAB_PROGRAM_FILE = MSTR_THEAD.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report
*-- documentation is marked
CONCATENATE MC_DOC_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report documentation
LOOP AT MTAB_PROGRAM_DOCUMENTATION.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Make the fully pathed filename that report will be saved to
CONCATENATE P_PATH
MTAB_PROGRAM_TRDIR-NAME
'.txt'
INTO LC_FULL_FILENAME.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
USING LC_FULL_FILENAME.
*-- Write out message with Program Name/Description
READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
IF SY-SUBRC = 0.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME,
MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
ELSE.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = 'No description available'.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME.
ENDIF.
ENDLOOP.
ENDFORM. " BUILD_PROGRAM_DIRECTORY
FORM SAVE_TABLE_TO_FILE *
--> FTAB_TABLE *
--> F_FILENAME *
FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
USING F_FILENAME.
IF RB_DOS = 'X'. " Save file to presentation server
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
OTHERS = 4.
IF SY-SUBRC NE 0.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ELSE. " Save file to application server
OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC = 0.
LOOP AT FTAB_TABLE.
TRANSFER FTAB_TABLE TO F_FILENAME.
IF SY-SUBRC NE 0.
WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDLOOP.
ELSE.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDIF. " End RB_DOS
ENDFORM. " SAVE_PROGRAM
FORM READ_REPORT_FROM_DISK *
Read report into internal table. Can read from local or *
remote computer *
FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
USING F_FILENAME.
DATA:
LC_MESSAGE(128) TYPE C.
CLEAR FTAB_TABLE.
REFRESH FTAB_TABLE.
IF RB_DOS = 'X'.
TRANSLATE F_FILENAME USING '/\'. " correct slash for Dos PC file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
IF SY-SUBRC >< 0.
WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
ENDIF.
ELSEIF RB_UNIX = 'X'.
TRANSLATE F_FILENAME USING '\/'. " correct slash for unix
OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET F_FILENAME INTO FTAB_TABLE.
IF SY-SUBRC = 0.
APPEND FTAB_TABLE.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET F_FILENAME.
ELSE.
WRITE: / 'Error reading file from remote computer'
COLOR COL_NEGATIVE,
/ LC_MESSAGE,
/ F_FILENAME.
SY-SUBRC = 4.
ENDIF.
ENDIF.
ENDFORM. " READ_REPORT_FROM_DISK
FORM SPLIT_INCOMING_FILE *
--> FTAB_PROGRAM_FILE *
--> FTAB_PROGRAM_SOURCE *
--> ` *
--> FTAB_PROGRAM_TEXTS *
FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
STRUCTURE MTAB_PROGRAM_FILE
FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
CHANGING FSTR_TRDIR
FSTR_THEAD.
DATA:
LC_DATATYPE(4) TYPE C, " Type of data, REPO, TEXP, RDIR
LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
LOOP AT FTAB_PROGRAM_FILE.
LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
CASE LC_PROGRAM_FILE(9).
WHEN MC_TRDIR_IDENTIFIER.
LC_DATATYPE = MC_TRDIR_SHORT.
WHEN MC_REPORT_IDENTIFIER.
LC_DATATYPE = MC_REPORT_SHORT.
WHEN MC_TEXT_IDENTIFIER.
LC_DATATYPE = MC_TEXT_SHORT.
WHEN MC_DOC_IDENTIFIER.
LC_DATATYPE = MC_DOC_SHORT.
WHEN MC_THEAD_IDENTIFIER.
LC_DATATYPE = MC_THEAD_SHORT.
WHEN OTHERS. " Actual contents of report, trdir, or text
CASE LC_DATATYPE.
WHEN MC_TRDIR_SHORT.
FSTR_TRDIR = FTAB_PROGRAM_FILE.
WHEN MC_REPORT_SHORT.
FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_SOURCE.
WHEN MC_TEXT_SHORT.
FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_TEXTS.
WHEN MC_THEAD_SHORT.
FSTR_THEAD = FTAB_PROGRAM_FILE.
WHEN MC_DOC_SHORT.
FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_DOCUMENTATION.
ENDCASE.
ENDCASE.
ENDLOOP.
ENDFORM. " SPLIT_INCOMING_FILE
FORM INSERT_NEW_REPORT*
--> FTAB_PROGRAM_SOURCE *
--> FTAB_PROGRAM_TEXTS *
--> F_TRDIR *
FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
USING FSTR_TRDIR LIKE TRDIR
FSTR_THEAD LIKE MSTR_THEAD.
DATA:
LC_OBJ_NAME LIKE E071-OBJ_NAME,
LC_LINE2(40) TYPE C,
LC_ANSWER(1) TYPE C.
*-- read trdir to see if the report already exists, if it does, prompt
*-- user to overwrite or abort.
SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
IF SY-SUBRC = 0. " Already exists
CONCATENATE 'want to overwrite report'
FSTR_TRDIR-NAME
INTO LC_LINE2 SEPARATED BY SPACE.
CONCATENATE LC_LINE2
INTO LC_LINE2.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = 'The selected report already exists, do you'
TEXTLINE2 = LC_LINE2
TITEL = 'Report already exists'
CANCEL_DISPLAY = SPACE
IMPORTING
ANSWER = LC_ANSWER
EXCEPTIONS
OTHERS = 1.
ELSE.
LC_ANSWER = 'J'.
ENDIF.
IF LC_ANSWER = 'J'.
*-- Create the TADIR entry. (TRDIR entry created by INSERT REPORT)
LC_OBJ_NAME = TRDIR-NAME.
CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
EXPORTING
WI_E071_PGMID = 'R3TR'
WI_E071_OBJECT = 'PROG'
WI_E071_OBJ_NAME = LC_OBJ_NAME
WI_TADIR_DEVCLASS = '$TMP'
EXCEPTIONS
EXIT = 3
OTHERS = 4.
IF SY-SUBRC = 0.
*-- Create Report
INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
*-- Create Texts
INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
LANGUAGE SY-LANGU.
*-- Save Documentation
CALL FUNCTION 'DOCU_UPDATE'
EXPORTING
HEAD = FSTR_THEAD
STATE = 'A'
TYP = 'E'
VERSION = '1'
TABLES
LINE = FTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
FSTR_TRDIR-NAME, 'was not loaded into SAP.'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ELSE.
WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
'was not uploaded into SAP. Action cancelled by user'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ENDFORM. " INSERT_NEW_REPORT
FORM GET_NAME *
--> VALUE(F_FIELD) *
--> F_NAME *
FORM GET_NAME USING VALUE(F_FIELD)
CHANGING F_NAME.
DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LC_PROG LIKE D020S-PROG,
LC_DNUM LIKE D020S-DNUM.
TRANSLATE F_FIELD TO UPPER CASE.
refresh ltab_fields.
LTAB_FIELDS-FIELDNAME = F_FIELD.
append ltab_fields.
LC_PROG = SY-REPID .
LC_DNUM = SY-DYNNR .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LC_PROG
DYNUMB = LC_DNUM
TABLES
dynpfields = ltab_fields
EXCEPTIONS
OTHERS = 01.
read table ltab_fields index 1.
IF SY-SUBRC EQ 0.
F_NAME = LTAB_FIELDS-FIELDVALUE.
refresh ltab_fields.
ENDIF.
CALL FUNCTION 'F4_USER'
EXPORTING
OBJECT = F_NAME
IMPORTING
RESULT = F_NAME.
ENDFORM. " GET_NAME
Regards,
Sree -
Load CF varibales into javascript array without outputing to source code
I have a javascript array for dynamic dropdowns - Automobile, makes,models, etc.
The javascript arrays are populated by by cf queries
Everythign works and functions fine - but it also loads the entire array (hundreds of lines of code) into the browser source code.
I would like to have the javascript arrays hidden from the browser source code by calling it:
<script language="JavaScript" type='text/javascript' src='../js/super.js'></script>
But when I code like this, the js file 'super.js' does not run the cf variables.
The only way I can get it to function right now is to save a cf file called 'super.cfm' and have it run the cf query, then list the javascript code under the query on this cf template.
THis works - but again, it causes the entire javascript code to be visible to the browser source code...
any ideas? - I am on cf 7
thanks in advancethanks for your idea
I ended up rethinking the whole process and realized that I only update my vehicle make/model list about once a week
So what I ended up doing was creating the the dynamic javascript arrays through cf - and rendered them in a browser, then took the browser source code (the fully rendered javascript arrays) and saved them as a static js file
My website uses this js file on every page, so I no longer need to call queries on every single page to populate the javascript arrays - they are already built and I am guessing cached by the browser (browsers cache js files right?)
SO this runs more efficiently.
The only draw back is that when I add a new vehicle to the list in my database, I will need to manually do the same process of rendering the new js code, then cutting and pasting it into my static js file that gets called by all pages.
So it loses the realtime updates - but this only happened once a week anyway - and it only takes me five minutes to create the new file.
We'll see if I get sick of manually creating a new js file each week - probably, but this seems better than making the server re-render the code on each page.
Does this make sense? - would this be less overhead on the server than implimenting your concept?
thanks. -
Can I deploy Mathscript subfunctions without revealing .m source code?
Good morning.
I am developing MATLAB algorithms containing functions and subfunctions. To integrate them in LabVIEW, I plan to use Mathscript nodes. And if I do so, I have to leave the subfunctions .m files in a repository on the PC (right?).
My problem is that I do not want to reveal these easily readable files when deploying my LabVIEW code. So I am looking for a way to deploy this code without making my source code available and open to all.
Thanks for any help!Thanks smercurio.
smercurio_fc wrote:
I think Ravens Fan was referring to actually putting the MathScript code inside a MathScript node, not leaving it as its own file. That way the code is saved with the VI.
Please allow me to illustrate my question through an example.
Let's say my code is script S1. S1 contains functions f1, f2 and f3, f1 contains subfunctions sf1 and sf2, and so on. I end with a code structure looking like this one (all .m files):
S1
- f1
---sf1
---sf2
-f2
---sf3
-f3
---sf4
---sf5
If S1 is copied in a Mathscript node, how can it work without leaving f1.m, sf1.m and others available on the user's pc after deployment?
Now, as I understand from my readings and my experimentations, when I put the function and subfunction files in the "LabVIEW Data" file, the functions name in the script S1 copied in a Mathscript node will appear in purple (by default). The node executes fine then. But if I copy the functions in Mathscript nodes in other VIs, the functions name appear in grey, and the node won't work. I don't know how to point to these other Mathscripts... Is there something I miss here?
smercurio_fc wrote:
You started out by saying you're developing Matlab algorithms. You should keep in mind that MathScript and Matlab are two different languages. While there are many similarities, there are also a lot of differences, and Matlab code is definitely not 100% compatible in MathScript. Thus, if you write the code in Matlab there is no guarantee it will even work in MathScript.
Thanks for the warning. I tried my algorithms using the method described above, and they work well. -
Retrieve the hided source code
hi all.
I have hided the source code of a program by appending the program to a internal table and inserting '*@#@@[SAP]' to the internal table at in dex one its working well. My task is to retrieve the hided source code of the program in the same name itself...Hi,
It is not possible to make any changes; you have to delete and recreate the program from scratch.
I hope you saved a backup copy of the source code, otherwise you could re-import the transport requests that contain your source code, a kind of versione restore.
Regards,
Andrea -
Where does source code of webpage of firefox gets stored on hard drive?
i want to scan the the source code of webpage which is loaded in firefox
Webpages are not saved to your hard drive; they are temporarily stored in RAM. You can right click on a webpage and click Inspect Element, which will show you the HTML code used in the current webpage.
-
Missing setup statements when exporting to java source code
We are moving from Toplink 9i to Toplink 10g. (I know, we're a little behind the times). I saved the project in 10g checked to make sure all the settings were the same as in the 9i project. When I export the project to java source code, we're missing the following configuration setup statements.
Has anyone else run in to this issue? (login is a DatabaseLogin object)
// Configuration properties.
login.setUsesNativeSequencing(false);
login.setSequencePreallocationSize(50);
login.setSequenceTableName("SEQUENCE");
login.setSequenceNameFieldName("SEQ_NAME");
login.setSequenceCounterFieldName("SEQ_COUNT");
login.setShouldBindAllParameters(false);
login.setShouldCacheAllStatements(false);
login.setUsesByteArrayBinding(true);
login.setUsesStringBinding(false);
if (login.shouldUseByteArrayBinding()) {
login.setUsesStreamsForBinding(false);
login.setShouldForceFieldNamesToUpperCase(false);
login.setShouldOptimizeDataConversion(true);
login.setShouldTrimStrings(true);
login.setUsesBatchWriting(false);
if (login.shouldUseBatchWriting()) {
login.setUsesJDBCBatchWriting(true);
login.setUsesExternalConnectionPooling(false);
login.setUsesExternalTransactionController(false);These settings are all the defaults, so not required. The project code generation no longer includes defaults.
-- James : http://www.eclipselink.org -
Hi
I am busy designing a new Java environment for our company. We are migrating from Forms to JEE. I would like to know what would be the best practice (if one exists) wrt source code management. Currently I am going with the following,
1. All original source code saved on development application server (Linux).
2. Use SVN to manage source from development application server.
I am not totally convinced that this is the correct method of managing source code.
What are my options?
Should the source be placed on a seperate file server independant of my application server?
Kind regards.
Leon.Development servers is used to be quite unstable sometimes so I would prefer to store the SVN repository on some kind of file server, where a file backup procedure is already implemented. If you're using some kind of cruise control or automatic testing you could checkout the source code to the development server to run it from here or to build distributions.
I'm familiar with both CVS and SVN and think that SVN is serving us best. We're just using a file based repository, on a network drive, protected by the normal file system permissions mechanism. I'm almost always using Tortoise SVN as client but the SVN client in JDeveloper is just fine, but I think the Tortoise SVN plugin in the explorer is just better.
Maybe you are looking for
-
Text editing in Web Dynpro for ABAP
Hi I am interested in getting ideas on the best way to achieve the following functionality in Web Dynpro for ABAP: 1) A text-editor where some basic formatting is possible (Italic, Bold, etc.) for the user to enter formatted text. 2) Save this text i
-
Find purchasing org based on PO no.
Hi Guys and girls. I am doing some changes to the sus PO smartform (standard form BBP_SUSPO) and one af the requirements is that the footer type should be determined by purchasing org. But now I cannot find any tables where I can find the purchasing
-
Hi, I hope this thread is in the right subject area! If not, thanks for reading. I've recently completed a Flash survey and I'm interested how it was developed. What seems to be clever is that you run through the questionnaire and the SWF clearly see
-
Screen Sharing Screen Resolution
I use Screen Sharing to control my headless Mac Mini with my 17" MBP. With previous versions of OSX I could get a large screen view, but now I am constained to 1280x1024. How can I improve this?
-
I have ipod touch 4(8gb),iTunes said to update and restore(didn't know it had to be turned off),followed the steps and iTunes said it cant restore and error 2009.now ipod only shows connect to iTunes and wont do anything else,not even power off,pleas