Saving swatches for CMYK while mixing it in RGB?
My document is in RGB mode and I mixed the colors with the RGB sliders, though I am still able to save this swatch for CMYK in the new swatch dialogue window. What is this actually doing to the color?
Thanks.
What is this actually doing to the color?
It's using the current default color profiles to convert those values. This may work for some colors, but you shouldn't let yourself be fooled. If you plan on using any of those swatches in a CMYK document and then do a calibrated proof/ preflight, you sure will get some warnings about insufficient ink densities or out of gamut colors or as a minor, it will not look like anything you expected it to... It's just the nature of the thing.
Mylenium
Similar Messages
-
For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. I have and frequently empty my trash can. I have researched this before and i see a lot of things that say get a external hard drive, but before I go and purchase one I want to make sure there is no other, simpler way, to solve this problem. Help Please.
You need an external drive so you can free up disk space. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing space on your Mac OS X startup disk -
User Exit for ME22N while saving of PO
Hi all,
i want a USER EXIT for ME22N while saving. i want EKET data.
After checking EKET data, i want to chage EKPO data.
Thanks
pabiHi,
Below Exit you can have access to EKET and EKPO data in the tables paramters before the SAVE
EXIT_SAPMM06E_012
TEKPO: EKPO data
TEKET: EKET data
Enhancement:MM06E005 (Check in SMOD transaction)
Check for one Paramter: I_TRTYP (This is for Create/Change/Display Modes) or You can check on Sy-Tcode = ME22N
Hope this helps
Regards
Shiva -
Hello, didnt really know hwere to post this guess it more belong under like "computers" generally,
but! For a while...
(-THE LONGER VERSION) :
No whait!, let me start where it all began, 2009, a december (erhh.. iii think? Hwatever!) litlle me hwere nearly Totally blank to the computer world. And suddenly it stood there on the table, a shining (it was shining back there) new "hp pavillion entertainment pc" with its smell of fresh plastic mixed hwith the strong smell from the cardboardbox, remember it as if it were yesterday
... Since then.... I have today a good solid pc knowing! (at more advance level cmd,bott menu, recovery, blah, blah... NERD!) here at the last awhile, ive prommised to make a lot! A lot of video projects!
(okay 2, but some big ones!) avchd multilayer 2 hours!!!!
So the poor hp laptop -dual core i2 4gb ram, has been begged to it knees! And simply cant handle it of course! and it have just trough time benn loaded with lots of crap, and is extremly noisy, heat, slow, anoying = unusable!
SO hwat i need is...
(-THE SHORTER) :
A computer setup that will EASILY! could handle stuff like that (avchd, multilayer, 2 hours project) -and simmilar. A total power machine! But Im tired of windows! And ugly cheap looking design! The times have changed and i change with them!
NOW I WANT APPLE!!
But but but... Hwat should i get????
1. Im NOT a billionare!
2. I repeat: NOT a billionare!
3. I also need portability for every day use beyond the hardcore creative editing and use
AT LAST:
i saw in front of me this genius plan... With a macbook pro, a tuned one, with as much of ram,cpu,gpu, and everything else as it can posibble have
-the perfect combination of transportabillity, everydayuse and total power!
When it gets combine with,
A cinemadisplay
A extra keyboard
And a extra magic mouse
And this power macbook pro, with screen, mouse, and keyboard i've found a really good offer at.
MY ACTUAL QUESTION.... :
Now it is yours turn to please! be creative! Please! Hwat does all you genius heads! think and say?
WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO, OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF? And if yes, HOW strong actually (ram,cpu,gpu...) will it need to have to be "more than enough"?
If no, what would all of you then suggest that is perfect in relation to everything?
PLEASE ANSWER!!Jonatan R. wrote:
WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO,
No,
the MacPro is the muscle machine and not constrained by power or cooling limitations like the MacBoo Pro is.
OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF?
If you press the MacBook Pro like a desktop machine, it will blow fans like a hurricane but will do the job eventually.
The longer you blow fans on a laptop, the sooner it clogs up with crippling dust and shortens the life of the machine.
You'll need the top end 15" or better, not the 13" as it has no dedicated graphics, only CPU graphics.
Preferably if you just now getting into video, you should be considering Avid on a Windows 7 tower, it's because Apple has been ignoring the MacPro for hardware updates to improve it and it seems like they don't want to carry it anymore. Also the last Final Cut Pro version had Hollywood up in arms as Apple removed a lot of required abilities to make it more "consumer friendly" which upset the Pro market who likes control.
Apple is focusing on the consumer computing market and getting away from the "Pro" market which needs the heavier hardware to handle video needs. They stopped selling the X-RAID and the X-Server, so Apple really isn't a "computer" company any longer.
Sure you can use a MacBook Pro and a external monitor for doing home movies and such occasionally, but if your into serious production you need to consdier other options now.
There is nothing wrong in getting a MacBook Air and a Windows 7 professional video tower too. -
I have a 10.5.8 Macbook, Leopard & almost exclusively use Safari. Got it in November of 2008. (Trackpad Clicker has not worked for ages. I have to use a mouse.)
Also, just recently, when using the keyboard to type, I may lose most if not all that I just typed, sometimes it doesn't space or move down more than to next line & often when I hit a symbol key, the cursor may end up anywhere.
For ages it has been doing what is stated in Subject/Question.
I can use it for a while, frequently clear Safari Cache. (Can't seem to clear Home->Library->Cache anymore. Much in there, but I fear that with the problems that I have had with this Mac since the first year that I will remove something that is necessary & really shouldn't be in that Cache. I did do it a few times way back, but it won't even let me move things to trash anymore.
I know that I need a new Macbook, but I can't afford one & really need larger than a 13" screen, as I have 3 different eye problems. My friend got a deal on a "bells & whistles" Toshiba 17" laptop during "Black Friday" for something over $400. Something comparable in a Macbook would be ~$2,800-2,900 plus tax!!! Ridiculous. I got a Mac to not have to deal with viruses & the like & to have one like my musician friend who needed direction with a computer & wanted a Macbook because of the "Garage Band". I bought mine ~3months after he bought his & wouldn't you know, mine is a Leopard & his a Tiger AND they had upgraded "Garage Band" on mine... so, nothing in common.
I have had nothing but trouble with my macbook since 1 year after I got it. As I was trashing what should have been "unsaved" & "saved" downloads, I happened to have my iPhoto open & near the end, I walked by to see all of my photos & documents disappearing to trash. Nothing has been the same since. The "Genius" was rude & no one could tell me what went wrong or fix my problem. I had over 8,000 items that were no longer in folders or albums or anything. All that was done was to move them from my trash to desktop to ONE folder for which I was left to deal. (Possibly go back to that time in my Time Machine??? But don't really know how to "pick out" all that was good, leave out the "mess" & still have all the new that I have done in the past 2.5 years??)
I had paid for 1 year of classes AND for the 3 year coverage & APPLE CARE. I was on the phone with those guys for hours & hours & months on end to NO avail. I am not a "happy camper". I think that they owe me a new one, even after all this time. My intent was to write them a very long detailed letter, but lightening has struck my house & fried all my components EXCEPT this "P.O.S", which would have been paid for by the Insurance company... Argh. And then my freezer went out & the new one was "DOA" & I have been fighting them & my dog has been lame for a year now, & I am a non-practicing vet, because of debilitating Depression. It has been over 10 months & my roof & chimney are still not repaired. I know... "TMI", but I guess I am venting to let you know why I haven't addressed Apple about my "P.O.S" macbook.
Any help wrt new WARNING message,(previous question), Safari winding down every time after some use, why my keyboard is going nutso & what to do about all the 1000's of files that are in my Macbook, (I thought that we moved most of them to an external HD, My Book. I have one for the Time Machine back up & one for "Storage". But, alas, it seems that most are still in my macbook & there is very little memory & that may well be a big part of my problem.)
Thanks for bearing with this "newbie on here".
I realize now, that this probably should have been at least 3 questions or more, sorry. If I have to redo, I will.
Just wrote a separate one regarding the "WARNING-SUSPECTED PHISHING SITE, every time I click on a new website on Safari.
Thanks to any & all. (Forgive me, if I don't know all the ettiquette & rules of this site. (Be kind & guide me.)Hello & welcome, let's see if we can help out here!
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts? -
why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.
-
HDD Problem - Freezes for a while during linux init
I've got a problem with my HDD. My Arch usually boots like thunderbolt, but since 3-4 days it freezes for a while before login screen. So I checked dmesg and this is what I found:
[ 53.360021] ata1: lost interrupt (Status 0x50)
[ 53.360041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 53.360045] ata1.00: failed command: WRITE DMA EXT
[ 53.360053] ata1.00: cmd 35/00:18:e0:d9:46/00:00:12:00:00/e0 tag 0 dma 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 53.360056] ata1.00: status: { DRDY }
[ 53.360075] ata1: soft resetting link
[ 53.562494] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
[ 53.628863] ata1.00: configured for UDMA/100
[ 53.628868] ata1.00: device reported invalid CHS sector 0
[ 53.628883] ata1: EH complete
[ 76.701622] fuse init (API version 7.21)
This is output from smartctl:
smartctl 6.1 2013-03-16 r3800 [i686-linux-3.9.4-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3500630A
Serial Number: 5QG1X3G1
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Fri Jun 7 11:41:09 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 095 006 Pre-fail Always - 43863857
3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2833
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 047 036 030 Pre-fail Always - 32856947045143
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16160
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3563
187 Reported_Uncorrect 0x0032 016 016 000 Old_age Always - 84
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 047 045 Old_age Always - 43 (Min/Max 23/43)
194 Temperature_Celsius 0x0022 043 053 000 Old_age Always - 43 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age Always - 32213260
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 118 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 118 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:18.309 NOP [Abort queued commands]
Error 117 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 116 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 115 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:13.895 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:13.895 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:13.887 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:13.419 RECALIBRATE [OBS-4]
00 00 10 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 114 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:13.895 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:13.895 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:13.887 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:13.419 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:13.419 NOP [Abort queued commands]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16160 -
# 2 Short offline Completed without error 00% 15759 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It would be great if someone could help me a little to prevent some major incident and point out what's happening. Thanks in advance!@pok0j
You best bet at getting the most uncorrupted data out of that disk, is to stop using it until you get a new disk that is at least twice as big as that one. The reason is that when you get a new disk, you want to try to do a full disk image in one go and get as much data out as possible before more data corruption occurs or the disk stops working at all.
The twice as large requirement is because you can then take your time to extract the files you want from the image and have enough free space to store them. After that make a backup strategy if you don't have one yet.
@drhill1
Has far as I know, both Current_Pending_Sector and Offline_Uncorrectable attributes start out at zero and 1) increase when there is a problem with a sector, 2) decrease when the problem is solved either by overwriting the affected sectors or when the sectors get reallocated thus decreasing the count, which should return to zero when there are no more sectors with problems. This implies that the count should never exceed the total number of user addressable sectors. Like I said, I have never seen any disk where those attributes didn't make sense, if those attributes weren't defined they wouldn't be reported I suppose. -
4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
IndiaYou are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried. -
Trouble saving images for web in CS3
Hello All,
I am trying to make buttons, etc. in Illustrator CS3 then saving them for web stuff as either gif's or jpg's. Everything was working fine for a while - the images and text looked great. Mid project the images and text started becoming super pixilated. No matter what type of image I tried to save it as, or what quality they're set to they're very jagged, grainy and awful looking! I don't think I've changed any setting and wracked my brain and the forums, FAQ's, help for a solution to this. Just seems like it came out of nowhere!
Thanks in advance for any advice and councel!!I am wondering why my advice was any worse than yours. I admit I mistakenly suggested Monitor RGB instead of Windows RGB but as far as I know sRGB is the default for most monitors. This would put them all pretty close. Am I missing something?
I would think that having someone set the images with icc profiles and then adjusting their own browser to correctly display such images would cause the exact same problem you say my solution does. It would give the image editor an impression of the image that nobody else is going to see. I don't know anyone that uses icc profiles for web work. In general I don't think you will find many people who have set their browsers to correctly view images that have these profiles. So it seems like someone that has will be thinking the images look great on their system but not on someone else's.
If someone may eventually repurpose these for print then worry about icc profiles for the printer. It seems like a huge waste of time for anything that is purely on screen.
I am not trying to battle with you over who is correct I just want to understand what your saying. -
Asked for CMYK and got SD/SP-codes
I am not sure I got the right category. If not I am so sorry!
I asked my customer for CMYK-codes. They d
ont know what I am talking about, and just sent me some color codes, they got from the printing bureau. Now I am the one whom dont know what they are talking about.... I got: "Red/Orange - SD30014" - please help, what color scheme is that? How can I transfer it safely to web (NOT interested in websafe colors tho!!!!)? Hov can I calc the other colors as well?
Kind regards
Lone JOK. First Photoshop Elements DOESN'T support CMKY color management. Never did. This is one of the primary reasons for upgrading to Photoshop itself, because of the publishing abilities of that professional category product. CMKY color management is used to interface digital image files with printer's inks, along with (generally) "Pantone" inks color swatches
Second, your post is bordering on incoherent, at least to me. First you're talking about customers giving you CMKY codes, then you're talking about the web. It could be me, who knows? Feel free to wait for a second opinion, you won't hurt my feelings.
IMHO, this post is possibly incorrectly directed. If you do have Photoshop itself, then this should go to that forum; http://forums.adobe.com/community/photoshop and then the appropriate OS (Windows or Mac) sub-forum. That said, it still might be a bit too cryptic to get your point across accurately.
Or perhaps, someone with more experience in the CMKY color space will be able to interpolate your intended meaning. Read between the lines, so to speak. -
WARNING: No saved state for javax.swing.JTable
Hi All,
I have a JTable component in my code and I used Netbeans to add swing components. However, I get this warning after I run my app:
WARNING: No saved state for javax.swing.JTable[jTable1,0,0,329x80,alignmentX=0.0,alignmentY=0.0,border=,
flags=251658568,maximumSize=,minimumSize=,preferredSize=,autoCreateColumnsFromModel=true,
autoResizeMode=AUTO_RESIZE_SUBSEQUENT_COLUMNS,cellSelectionEnabled=false,editingColumn=-1,
editingRow=-1,gridColor=javax.swing.plaf.ColorUIResource[r=128,g=128,b=128],
preferredViewportSize=java.awt.Dimension[width=450,height=400],rowHeight=16,rowMargin=1,
rowSelectionAllowed=true,selectionBackground=javax.swing.plaf.ColorUIResource[r=51,g=153,b=255],
selectionForeground=javax.swing.plaf.ColorUIResource[r=255,g=255,b=255],showHorizontalLines=true,
showVerticalLines=true]What is the reason of this? If I need to catch this exception, how can I add it with netbeans?
Edited by: Darryl Burke -- broke a long line into several linesSet the name property of your JTable, it's a Netbeans thing, rather than a Java problem. table.setName("MyTable");Have a look at this thread for details: SessionStorage warning while program is running
Please only post Java related questions here and post Netbeans questions to a netbeans forum/mailing list, thanks. -
I need to cancel my photoshop lightroom package. I cant afford to keep paying for it while I am at college and my parents cant afford it for me. I tried to cancel it last night but my laptop decided to crash. I then went to try and do it today and it wouldn't let me cancel it.
I would love to pay for my photoshop but due to saving for uni I can't afford it. Is there any way I would be able to pay for it when I can afford it? Thank you very much.Have you tried calling on the phone?
1 (800) 833-6687
Contact Customer Care
Nancy O. -
when i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out
Hi,
This is mostly about what is called Away as a Status and setting an Away Status Message when going Idle.
Idle happens when there has been no Keyboard or Mouse input for 10 mins.
(read as for any Input device like Trackpad, Graphics pad, Trackball etc)
The Bottom section of the General Section of the iChat Preferences is abouut what happens when you go Idle. (The Orange Arrow and Text in the pic Below)
(Your Status indicator will go Amber)
Some of this does depend if you have Set "Block others for Seeing me as Idle " in the Accounts section > Account Info Tab on AIM Logins.
It is also linked to Fast User Switching (your Mac User Account could go Idle whilst you are Logged in as another Mac User Account).
The Blue Arrow and Text points out you can make sure iChat stays at the Last Status (And Message) you used on Quit (The default is for this to be Ticked and iChat to change to Available).
The Red Arrow and Text is about whether you appear as Fully Off line on Quit and Sleep.
On Quit iChat does not fully log you out of the AIM Servers.
You will appear as Off Line to your Buddies but the AIM servers will keep Off Line Messages for you (well, if you have never replied "NO" to the first Off Line IM you ever got)
However it does seem that in certain Combos of these settings that you can "Seen" by your Buddies as Away rather than Off line.
Picture of General Section of Preferences
If you add in to this mix a shorter time than the Idle time to make the computer go to Sleep then you can also create other "states" as well.
So...
In it's default settings:-
1) iChat will always set you to Available on Launch.
2) At 10 mins of no input you will go Idle (Amber)
3) For Fast User Switching you can set iChat to go Off Line or to Go "Away" (A Status Message setting).
(It has been so long I forget what the Default was)
4) iChat is set by default to show you going Idle (See the Accounts section of the Preferences)
5) If you specifically set an Away Status (or Message) then iChat will do whatever is set in the bottom part of the General Section.
6) Sleep will put you Off Line and the "When I Quit iChat, Set My Status to Off Line" option will kick in
The Default is for this to be Unticked.
There is no setting to create going to Away if left alone.
I am not entirely sure on this one though as I think it can be created via "Second Pass" things.
Note:-
Example of Second Pass.
Go to the View Menu and the Sort Buddies option.
If you sort by First Name then the Buddy list is likely to Reorganise itself based on the Address Book Entries.
If you now Sort by Availability it will organise those First Names by Availability rather than reverting to what was set before.
(Screen Names Only Buddies will appear alphabetically in any list)
Now repeat by Sort by Last Name then Availability and you will see that the list is not in the same order as First Names and Availability.
At this point I am not sure exactly what you meant.
The Title bit implies that Sleep was/is getting in the way.
The actual question details leave me wondering what you think you have set iChat to do ?
8:40 PM Friday; May 6, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I was holding my iphone in my hand for a while and suddenly the screen is gi-normous...what do I do??? how do I reboot???
to reboot you hold the power on/off button and the large home button together until you see the little apple logo.
However if you take three fingers together you can tap the screen back to its former size.
See article below.
My iPhone Icons Are Large. What's Happening?
Good Luck
Maybe you are looking for
-
Flash Builder 4.7 refactoring is broken
I'm unable to rename methods or classes in Flash Builder 4.7. Attempting to refactor gives this error: "An unexpected exception occurred while performing the refactoring. See the error log for more details." This happens in all my projects. I've recr
-
This question was posted in response to the following article: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6c43a.h tml
-
SAP APO DP/SNP (C_SCM3) certified
Hai, I got certified on <a href="http://www50.sap.com/useducation/certification/curriculum.asp?rid=251&vid=5">APO DP/SNP certification</a>. Just want to give some information to all those who want to take this exam: The duration of test is 2
-
Link to Bug Report Forum on Forum help page is dangling...
The link Bug Reporting Forum (http://social.answers.microsoft.com/forums/en-us/reportabug/threads/) on page Answers > Forums Home > Help (http://social.answers.microsoft.com/Forums/en-US/help) is dangling. Makes it a bit more complicated than necessa
-
A few albums in my Music Library have wrong artwork, so i tried to change it, but when i change the artwork and then restart iTunes, the artwork goes back to the previous one! Any sollutions?