Saving Template doesn't update pages
I just made changes to my template, saved it, and the connected pages are not updating. The FAQ say's to select the 'Update' button, which I can't seem to find.
Any suggestions?
File extension is .dwt
Not exactly sure of your 2nd question. I only have one web site I work with. I’m quite the novice. But I think the answer to your question is yes.
The .dwt file is located within my Templates folder of the site
Thanks,
Stacy
Similar Messages
-
Dreamweaver CS6-updating template doesn't update pages, update screen hangs
I'm working with a dwt file provided with shopping cart software which I purchased from a third party developer. I've made changes on the main.dwt provided to personalize it for my business. To begin with, everything seemed to be going smoothly, but then at some point, updating the template stopped updating the pages dependent on it, unless the pages are actually open in Dreamweaver. Even when the pages are open, however, the "Update files dependent on" box seems to hang. If I click "close" it asks if I want to stop updating the site. It's very cumbersome to have to open every page in the site in order to get the changes in the template to propagate to the pages. I'm running CS6 on Windows 7 Home Premium. My site is not yet published, so I can't provide a link to it. It's still on the drawing board.
Is the .dwt template file still within the Dreamweaver generated Templates folder in your site root?
index.html <--your site's home page
Templates <-- the Templates folder on same level as site home page
yourtemplate.dwt <-- your .dwt file
If it's not, that can cause all kinds of problems in DW. -
Template doesn't update properly
Last July, we converted our website from GoLive to
Dreamweaver. Now, for the first time since our conversion, I had to
make some changes on the template and there's a problem on the
updated pages.
The problem is that the navigation is not working properly on
many (not all) pages updated with the template. The nav works fine
on the template itself. The template ("template.dwt") is in the
Templates folder.
The specific nav problem is that on rollover, the white
subheadings do not show. Only an image icon shows. This problem
occurs with the files located in a folder WITHIN a folder.
For example:
VSSC/contact.html: nav works fine
VSSC/News/books.html: doesn't work (white subheadings don't
show)
I see the code pointing to the image is the same for both of
these pages even though one is a folder within a folder:
VSSC/contact.html:
'../images/navigation/espanol_topics/libroso.gif'
VSSC/News/books.html:
'../images/navigation/espanol_topics/libroso.gif'
The code before I updated with the template was:
VSSC/contact.html:
'../images/navigation/espanol_topics/libroso.gif'
VSSC/News/books.html:
'../../images/navigation/espanol_topics/libroso.gif'
Is this making any sense? Is there a quick fix to this? In
other words, a preference setting to check before updating the
Template?
Thanks for your help,
NancyPost a link to the site, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"eucalyptus1" <[email protected]> wrote in
message
news:fhi88m$5g$[email protected]..
> Last July, we converted our website from GoLive to
Dreamweaver. Now, for
> the
> first time since our conversion, I had to make some
changes on the
> template and
> there's a problem on the updated pages.
>
> The problem is that the navigation is not working
properly on many (not
> all)
> pages updated with the template. The nav works fine on
the template
> itself.
> The template ("template.dwt") is in the Templates
folder.
>
> The specific nav problem is that on rollover, the white
subheadings do not
> show. Only an image icon shows. This problem occurs with
the files
> located in
> a folder WITHIN a folder.
>
> For example:
>
> VSSC/contact.html: nav works fine
> VSSC/News/books.html: doesn't work (white subheadings
don't show)
>
> I see the code pointing to the image is the same for
both of these pages
> even
> though one is a folder within a folder:
>
> VSSC/contact.html:
'../images/navigation/espanol_topics/libroso.gif'
> VSSC/News/books.html:
'../images/navigation/espanol_topics/libroso.gif'
>
> The code before I updated with the template was:
> VSSC/contact.html:
'../images/navigation/espanol_topics/libroso.gif'
> VSSC/News/books.html:
'../../images/navigation/espanol_topics/libroso.gif'
>
> Is this making any sense? Is there a quick fix to this?
In other words,
> a
> preference setting to check before updating the
Template?
>
> Thanks for your help,
> Nancy
> -
Placeholder text won't disappear + template doesn't update
Hi,
I'm using the latest iBook author version (2.2) on Yosemite.
I selected a text as a placeholder, but when I type my new text, it doesn't disappear. I've already created many sections using this template and I don't want to recreate them all over...
Also, it seems like the modifications I have made in my template, even though I save them, don't apply, like the template is not updated. I tried to right-click on the template to select "reapply to layout section" but I don't have access to it.
Thanks a lot!Have you tried to give it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if the badge is still there.
-
I tried getting an answer to this question a while ago, but I
guess my question got lost in the shuffle. So here it is again:
Last July, we converted our website from GoLive to
Dreamweaver. Now, for the first time since our conversion, I had to
make some changes on the template and there's a problem on the
updated pages.
The problem is that the navigation is not working properly on
many (not all) pages updated with the template.
The specific nav problem is that on rollover, the white
subheadings do not show. Only an image icon shows. This problem
occurs with the files located in a folder WITHIN a folder.
For example: here's a page updated from the template:
http://www.vedanta.org/vssc/news/fire1.html.
This page is in a folder WITHIN a folder and as you can see, there
is a problem with the main navigation at the top. On rollover of
the subtopics, the orange buttons should appear white, and they
don't.
The template nav works fine:
http://www.vedanta.org/Templates/template.dwtThat would be it, Nate. DW cannot manage links embedded in
javascript, EVEN
INCLUDING THOSE IT WRITES!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"NateBaldwin" <[email protected]> wrote in
message
news:fikhik$45e$[email protected]..
> >The specific nav problem is that on rollover, the
white subheadings do
> >not
> show.
> >Only an image icon shows. This problem occurs with
the files located in a
> folder
> >WITHIN a folder.
>
> It looks like you build the drop-down navigation and
rollovers using
> GoLive
> actions, yes? As far as I know, Dreamweaver can't manage
relative image
> and
> link paths in GoLive-generated JavaScript code, so all
the paths are still
> relative to the Templates folder, and not the actual
location of the page
> using
> the template. So, you're likely to have path problems in
any pages that
> aren't
> 1 subdirectory deep.
>
> To fix it, you'd need to either make all the image paths
root relative
> (from
> your site's html root - "absolute" paths in GoLive-talk)
in the GoLive
> action
> JavaScript, or you could rebuild the navigation using
Dreamweaver
> behaviors so
> the relative paths can be managed dynamically (assuming
DW can do that).
> -
Template doesn't update nav buttons
Hi, Having a problem getting my template to update the spry menubar links. Spent a lot of time on the template to get it right. The banner and navigation buttons are part of the template. So here's what I did....after creating and saving the page as a .dwt file I then created a page from template, the update links box was checked. Once opened I save it as index.html added my content, saved, published and continued the same way for the other pages. The pages look fine but none of the nav buttons work. Don't know what to do. Any suggestions. Using Dreamweaver CS4
Thanks
FrankSorry, not sure how to do the 'show us a link to your Template.dwt file/" So here's the code Thank you very much
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Levick Multi Services</title>
<link href="../oneColFixCtrHdr.css" rel="stylesheet" type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
a:link {
color: #FF0;
-->
</style></head>
<body class="oneColFixCtrHdr">
<div id="container">
<div id="header">
<h1><img src="../Levick Banner.jpg" alt="Banner" width="900" height="232" border="0" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="7,9,885,179" href="#" />
<area shape="rect" coords="690,184,897,219" href="mailto:[email protected]" />
</map>
</h1>
<table width="855" border="0" align="center" cellspacing="0">
<tr>
<th height="39" scope="col"><ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="../index.html">Home</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">About Us</a>
<ul>
<li><a href="../AboutUs.html">Our History</a></li>
<li><a href="../OurPrivacyNotice.html">Our Privacy Notice</a></li>
<li><a href="../OurLocations.html">Our Location</a></li>
</ul>
</li>
<li><a href="../Services.html">Services</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">Your Policy</a>
<ul>
<li><a href="#" class="MenuBarItemSubmenu">Home</a>
<ul>
<li><a href="#">Types of Coverages</a></li>
<li><a href="#">Optional Coverages</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Auto</a>
<ul>
<li><a href="#">Underwriting Factors</a></li>
<li><a href="#">Liability Damage</a></li>
<li><a href="#">Property Damage</a></li>
<li><a href="#">Optional Auto Coverage</a></li>
<li><a href="#">Tort Options</a></li>
</ul>
</li>
<li><a href="#">Commercial</a></li>
</ul>
</li>
<li><a href="../WhyChooseUs.html">Why Choose Us</a></li>
<li><a href="../ContactPage.html">Contact Us</a></li>
</ul></th>
</tr>
</table></div>
<div id="mainContent"><!-- TemplateBeginEditable name="MainContentRegion" -->
<p> </p>
<!-- TemplateEndEditable -->
<!-- end #mainContent --></div>
<div id="footer">
<p>Website created and maintained by<br />
<a href="Francis" _mce_href="mailto:[email protected]">Francis">mailto:[email protected]" >Francis J. Cunningham, Jr. </a></p>
<!-- end #footer --></div>
<!-- end #container --></div>
<script type="text/javascript">
<!--
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html> -
Template does not update pages
When I change a menu item in a template (located in the Template folder), and attempt to save it, DW asks if I want to update all pages created w/this template. When I hit OK, all seems well. The log shows all pages have been updated. When I preview, the browser displays a message that xxx.html cannot be found in the Templates folder.
When I restored the entire site from a Time Machine backup, the problem persisted.
Any help would be most appreciated.Not a templates user, but I am asking why your page is looking for a file with an HTM extension in the Templates folder. As I understand it, only template file(s) with the dwt extension should reside in the Templates folder.
Can we see your code to determine what is calling for that HTM file? -
Updated Template does not update pages
When I update and save a template it does not ask if I want to update the pages that use that template. I recently down loaded and reinstalled all my Adobe applications. Is there a parameter that has to be tuirned on to fore pages to be updated when the templete is changed?
I am using CS 6.Have a look here http://forums.adobe.com/thread/953304
-
Template is not updating the rest of the pages
This is odd. I have a template, from which I created all child pages in this website and now want to change the navigation to add a new drop-down menu structure under "cases."
Here's the website: http://ghostsofnewengland.org/
Here's the template: http://ghostsofnewengland.org/Templates/goners.dwt
From the template, you'll see that I have changed some commented-out sections in the code. Then I saved the .dwt file, it did not ask and did not update the rest of the pages in the website.
Normally, I work with templates as a fast way to handle just about any change to navigation and other commonly-available sections on a website. This is the first time I've seen Dreamweaver simply fail to update pages (or even ask) after a template change.
Anyone have a quick way to get Dreamweaver to wake up here?
-Mark HollisMy advice is to exit DW, reboot, open only your template and make a minor change (add a comment someplace) save and update child pages. If that doesn't work, then give Adobe a call because something isn't right.
Jim -
Any way to turn off errors when updating pages from the template?
I'm using Dreamweaver MX. My site is huge. It's an intranet
spanning dozens of departments. Some of those departments have
subsites that don't fall under the intranet's control, although
they are embedded within our site's folder structure. When I make a
change to the template and update pages, every time I hit one of
those subsites I get tons of errors, from "template not found" to
"unmatched body tag". The errors that pop up each have to be
clicked on before the updating can continue. I get hundreds of
these.
Is there any way to make errors not pop up while updating
pages from the template? Or even to exclude certain folders from
being checked? (Cloaking doesn't do it.)> I'm using Dreamweaver MX. My site is huge.
Both of these are problems, I'm afraid. Combining that with
templates is
really trouble.
> "unmatched body tag".
Errors such as this are definitely caused by errors in your
page itself.
Can you show me a page where you would get this?
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
Valid code will not produce these errors. Unfortunately, the
only way to
avoid them is to remove any validation hiccups from your
pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"abna" <[email protected]> wrote in message
news:f14ue2$pk5$[email protected]..
> I'm using Dreamweaver MX. My site is huge. It's an
intranet spanning
> dozens of
> departments. Some of those departments have subsites
that don't fall under
> the
> intranet's control, although they are embedded within
our site's folder
> structure. When I make a change to the template and
update pages, every
> time I
> hit one of those subsites I get tons of errors, from
"template not found"
> to
> "unmatched body tag". The errors that pop up each have
to be clicked on
> before
> the updating can continue. I get hundreds of these.
>
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
> -
Template not updating pages upon save
I'm having an issue with DW CC where I make changes to a template and save it but it doesn't update any pages. What is even stranger is if I open the pages and I save the template it will update the opened pages but not any closed ones. Anybody else run into this problem?
I filled out the form that somebody linked to aboe and I actually got a response from Adobe recognizing this as a BUG. Now if they would just fix it. Response from Adobe is below.
Hi Patrick,
Thanks for writing to us with your concern.
We would like to let you know that we are working on this so that Dreamweaver CC users can “Open” and/or “Save” ASP/CFM files.
We have already logged an internal bug # 3609524 for the same. We solicit your patience in this regard.
Please check this help document for opening Cold Fusion documents in Dreamweaver CC: http://helpx.adobe.com/x-productkb/policy-pricing/open-coldfusion-dreamweaver-cc.html
Please let us know if you need help regarding anything else. We will be more than happy to help you.
Thanks,
Arindam Ghosh
Dreamweaver Team,
Adobe Systems -
Template not updating pages in MAC CS4
I have Dreamweaver CS4 on a iMAC (latest computer) w/ Lion (recently upgraded). I had been using Dreamweaver 8 on a PC but moved everything a few months ago.
I updated the template. When I saved it, Dreamweaver was supposed to ask to update all related pages, but it didn't ask that. When I open a page and apply the template, the change shows up. But I have too many pages to do that. I tried going to Modify> Template> Update pages. I turned the LOG on and it said the pages were updated. I did a Review at the top level and the pages showed up and I moved them to the server. I don't know why the changes aren't showing up on the server. I refreshed the page on the server and the change still didn't show up.
TrudyThe next thing to try would be this -
1. In DW's Site manager, export the site definition (make sure you note where you export it so you can find it again - also make sure you export the FULL site definition).
2. With the site still selected in Site manager, REMOVE it.
3. Now IMPORT the site definition you just exported.
That can also fix this troublesome problem. -
Lost prompt to update pages that use template..
Yes I know I should not use templates but I do on very small sites with under 10 pages. When making adjustments to the templates I used to get a prompt asking me if I want to update pages that use that template, but I no longer get that. I must have changed something but I am wondering how I can change it back. I can manually update but I always forget and I do not wantto go that route....anyone know how I can get that prompt back to update pages that use template? Thanks much!
Well you have suggested SSI's before instead Murray....
No, I've suggested SSI's instead of Library items, or a combination of SSI's and a template instead of nested templates, but I've never suggested using SSI's instead of templates, although it is a workable solution.
I dont think it matters what I have in the code. It used to prompt me whenever I changed ANYTHING and had to save.
I do. However, try this simple test -
1. Create a new, blank HTML file.
2. Save it with FILE | Save as Template... (verify that the page is saved in the "Templates" folder)
3. Spawn a new child page from this template with FILE | New > Page from Template.
4. Save this page with any name you prefer.
5. Return to the template page and change the title from Untitled document to "Whatever". Save it. Are you prompted? You should be.
If you are not prompted then there is something systemically wrong with your DW installation. -
Template will not update in pages
I've changed the template and saved. The other pages will not
update to show
this change. I try to manually do it through
>File>Templates>update current
page. It displays a message saying ".....contains an invalid
path." Then
another window that says "Error accessing file .......bad
file path (error
code 3).
I just downloaded this whole website from where it was
hosted, made some
changes and then I am going to upload changes. The only thing
I can't get to
work is updating pages from the template. Any help would
greatly be
appreciated.> The "template.dwt" is in the Templates folder as it
should be.
Is the Templates folder in the root level of the site?
Nothing in that template looks out of place or improper.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Andrena Lefdahl" <[email protected]> wrote
in message
news:[email protected]...
> Here is a link to the template:
>
http://ideal-mfg.com/fastway/Templates/template.dwt
>
> Also when I go to >Modify >Templates >Apply
Template to Page
> The "template.dwt" is not listed anymore. How do I get
it in there?
> The "template.dwt" is in the Templates folder as it
should be.
>
> Thanks
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> Clearly something is wrong. Can you show me the
template page? Post a
>> link to it, please?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Andrena Lefdahl"
<[email protected]> wrote in message
>> news:[email protected]...
>>> I've changed the template and saved. The other
pages will not update to
>>> show this change. I try to manually do it
through >File>Templates>update
>>> current page. It displays a message saying
".....contains an invalid
>>> path." Then another window that says "Error
accessing file .......bad
>>> file path (error code 3).
>>>
>>> I just downloaded this whole website from where
it was hosted, made some
>>> changes and then I am going to upload changes.
The only thing I can't
>>> get to work is updating pages from the template.
Any help would greatly
>>> be appreciated.
>>>
>>
>>
>
> -
Error when updating pages from template
When updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
PaulWhen updating pages from a template I have been occasionally
getting this error message:
While executing onLoad in Swap Image.htm, the following
JavaScript error(s) occured:
At line 325 of the file "Hard Drive: Applications: Macromedia
Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
Reference Error: createObjRefs is not Defined
I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
Any ideas on how to fix this?
Thanks,
Paul
Maybe you are looking for
-
Please Help! I have set up my cable modem to my Airport. It's an old Airport, so that may be the first of my issues. I have no problems connecting my iBook through the Airport, but I'm trying to hook up my roommate's PC (Toshiba using a Linksys Wirel
-
How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network? The actual remote doesn't work anymore, so I've been using the remote app on my phone but now that our internet changed, I c
-
Maintain settlement rules in a PM order
Hi! I would like to find an easy way to automatically fill the settlement rule in an existing PM order. If it is possible I would like NOT to use BDC (Batch input). A function element or maybe a BAPI would be the best solution. If anyone knows a way
-
FDM schema upgrade error 91-Object variable or With block variable not set
Hi, I try to upgrade FDM schema to 11.1.2.1 using FDM Workbench Client. From log it looks like we go fine through first 4 steps. When it comes to metadata (5 step) FDM gives the same error: Step 5: Updating Metadata Failed! 91-Object variable or With
-
hi, i broke my n500 screen, and im using an External screen. the problem is that the fnkey works only after i boot an os. i want to format, but it wont switch to the ex screen till im boot the os. Thanks