Saving the Compressor file after it is encoded?

I just encoded some QT files as M2V. I was prompted to save the changes to the document within Compressor before closing it. Why would I want to save the Compressor file?
Thanks.

If you are continually encoding files being saved to the same location, you can save the batch and re-encode the updated files with one click...
For example I encode the day's edits to mpeg2, if I export to the same location and resubmit the batch I get that day's mpegs (although you have to delete/rename the others or Compressor complains).
Jason

Similar Messages

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature. I'm using Adobe Acrobat Pro 9

signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature. I'm using Adobe Acrobat Pro 9

Do you mean the drop-down list that shows up when you right-click on the signature (in the Signature Panel or signature field)?
I do not think that just saving a PDF with no changes would result in that unless you somehow flattened the PDF.
Can you see the signature in the Signature Panel? Can you expand ([+] at left) the signature? Does the Signature Panel provide info for this signature? Is the signature validated? If "yes" then is the signature status Valid?
It could be that when you saved the file you somehow flattened the signature, so that now you have only signature appearance in the PDF but not a real signature field which contains all signature properties. If the Signature Panel does not contain your signature (enpty if your signature was the only one) then this is the most likely cause.

Is it possible when saving the psd file to have an automatic jpg file saved at the same time?

My work involves preparing images for printing lightboxes and window installations. My clients require to pre-approve the photos before printing.
I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size. This makes it possible for me to add these to a presentation and and send them to my client.
Is it possible when saving the psd file to have an automatic jpg file saved at the same time? Or do I still have to do this manually?

If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette. You may be able to write a Photoshop that would do as save as Jpeg, And you should be able trigger its execution by setting up a Script Save event using the Script event manager. When You do a manual save the script should be triggered. I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event. I have only use open events.

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

How do i transfer a compilation photo file from iPhoto consisting of canon(img) and lumix(p..) in the order i compiled them to a usb stick as at the moment it is putting all the lumix files after the canon files?

I have a macbook pro 15 inch retina 16 gb 1600mhz 2.7intel i7 osx 10.8.5
I have just put together an iPhoto file of wedding photos consisting of a compilation of images from my canon(img files) and lumix(p..files) I want to know how to transfer them to a usb stick in the order i compiled them as at the moment it is putting all the lumix files after the canon files which is not how i want to present them to the newlyweds?

Files are ordered by the file-viewer being used. What viewer are you using, and what data field are you sorting by?
In Finder, as in most applications, you can select the data field to sort by clicking a column header. Clicking the selected header will reverse the sort.
This is the Aperture forum, but what applies to Aperture is likely also true for iPhoto: if you want to be able to sort your files in a specific order in a file-viewer, you should give them names that allow for sorting in that order when the name field is selected as the data field to sort by. In Aperture, one creates new files by exporting, and one uses a File Naming Preset to name the files. The File Naming Preset can start with an ordinal count or a sequence number. Either of which will allow you to retain your order when viewing your files in a file viewer.

Can't create a new illustration. Problems occurred while saving the print file.

I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
I have rebooted with no avail.
System:
Adobe Creative Cloud CC
Mac Book Pro 2012
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3

Is a printer connected? Is it turned ON? Is the driver up to date?
Illustrator checks this every time and also writes information on the printer into the file.

Adobe X pro 10.0.0 stop responding while saving the pdf file as word

Adobe X pro 10.0.0 stop responding while saving the pdf file as word, i chose file>save as>microsoft word>Word Document.
I tried to install on the X pro on another machine and tried to convert also the same issue.
Any help? please advice

I suggest you bring Acrobat up to 10.1.2 by appltying the most recent maintenance.
Ken Friedman

Could not download the ordered file after five attaempts due to network problem

Hi,
Could not download the ordered file after five attaempts due to network problem.
Help required.
Regards,
Nilesh Shah.

http://prodesigntools.com/tag/ddl
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Mylenium

Is there a way to work with AutoCAD files in Illustrator without saving the autoCAD file back to a 2

Is there a way to work with AutoCAD files in Illustrator without saving the autoCAD file back to a 2007 .dxf file format?

Different versions of Illustrator can import different versions of DXF.
Maybe there's a plugin by hotdoor that might enable you to import the latest version of the file format.

While saving the Ai file its taking much time

I am using windows 7 and Ai CC, when i am working on files while saving the Ai file its taking much time. I got 4 GB RAM. now i got better system too with ram of 6GB. stillthe Ai is taking much time to save 300 MB file.

Thank you Jdanek.
1. I am saving the file in my local HDD only.
2. Scratch disk is F Drive [100 GB free space], there no data is stored.
3. Even i increased the Virtual memory too.
4. Now I switched off the "Save with PDF compatability" too, No luck!

SPD "The server could not complete your request" while "Saving the XOML file"

Greetz!
I'm trying to resolve an issue where a SharePoint Designer Approval workflow on a list fails while "Saving the XOML file". The workflow has been reduced to a single step for tests and it still fails.The more details dialog is empty.
The Event Viewer does not record the event and no unexpected events show up in the logs.
Any ideas on what might be causing this?
Thanks!
Love them all...regardless. - Buddha

Hello Kansas,
Did you ever get a solution for your publishing issue. I have been seeing the same problem and I am reading blogs that is pointing to a Feburary 2011 CU as the possible solution. http://support.microsoft.com/kb/2557533

An error occurred while saving the following file

I want to build an app but I get this message:
An error occurred while saving the following file:
C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
Nothing more, absolutely nothing more.
Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
I really hope somebody can help me.
Thanks,
JuanM

What's changed in your code? Have you tried undoing anything or reverting back to a pervious version?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Cannot view notes made on sticky notes after saving the pdf file. Any idea on how to fix this?

After listening to a 3 hour recording of a lecture, i finally finished typing my notes. I saved the file the same way as usual and now when i click on the sticky note nothing happens. I click on the comments sections and it says no comments have been made. Anyone know how to get all the info back?

after reinstalling firefox 4, still unable to successfully download plugin program updates from the software publisher's websites.

Saving the Compressor file after it is encoded?

Similar Messages

Maybe you are looking for