Saving the same image with different croppings for printing various sizes

I've searched for this to no avail. I tend to always have a few pictures in rotation that I end up cropping multiple times when I am printing. Pictures where today I need to print a 4x6 and tomorrow it's a 5x7 of the same picture, etc. I am trying to figure out a way to save the file with that cropping. Ideally there would be a way that if I also modified anything else in the image that would also show up in the other versions. I know there is Create Virtual Copy, and that could work if I could then figure out how to change the file name so it would show that it was cropped for 5x7 or whatever. Are there any other creative ways I am missing?

When you create a Virtual Copy it is given an individual Copy Name (as well as the original file name)....default would be Copy 1, Copy 2, etc. However, that Copy Name is editable in the Metadata Panel, simply click in the name field and you can give it a more descriptive name, e.g "VC Crop 5 x7". See here:
Before:
After:

Similar Messages

HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
Then resync with your iPhone and all will be well.

Use the same form with different button turned on in different calls

Can I use the same form with different buttons turned on in different calls?
Thanks!

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

HELP!! Authorization in the same laptop with different operation systems

My BF installed Win 7 operation system on his laptop yesterday and re-authorized it when he used iTunes. However, when he finished authorization, a dialog block showing that "*Including this one, you have authorised two computers out of your available 5*" appeared; what's worse, when he connected his iPhone to the laptop, it deleted all the bought apps in the iPhone, instead of synchronizating.
I also want to install Win 7 operation system, but I'm afraid that the same thing would happen again (to my iTouch).
We're quite confused that why the authorization in the same laptop with different operation systems is counted as two times. Friends who know please tell us whether this is the case.. If not, please tell us how to deal with it as we frequently re-install operation system for quicker operation.
Message was edited by: Shiwen
Message was edited by: Shiwen

It's the *operating system* that is authorised, not the particular user profile or the hardware. Before upgrading/reinstalling deauthorise and you won't run out...
tt2

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502)

Why can't two different users use Itunes on the same computer with different log ins

Why can't two different users use Itunes on the same computer with different log ins

Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching.

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

Can you have 2 ipods on the same accounts with different play list?

Can I have 2 ipods on the same accounts with different plalists?

Sure. Each iPod is identified in iTunes with its own name and you configure each one as you wish:

How to automate saving the same image multiple times?

Hello. I wish to save the same image multiple times in a folder... is there a way to automate this function? I also need the flexibility of determining the starting number in this image sequence. Thanks.

Good day!
I would recommend asking for help over at
Photoshop Scripting
And going into more detail about what you want to achieve (maybe post a screenshot, diagram, mock-up to illustrate it).
Regards,
Pfaffenbichler

HT5622 I have 2 iPads in the same household with different addresses and I get my wife's emails which I don't want , she doesn't get mine , what is the problem

I have 2 iPads in same household with different email addresses , I have just set up my wife's one and her emails are coming to both address why is that, as her details are not on my machine and vice versa, help

You must have added your wide's email account in the Settings app.
Settings > Mail, Contacts, Calendars > select on your wife's email account > scroll down to Delete and delete her account from your iPad.

Capture window shows the same image with Viewer

Hi there,
I'm trying to capture a movie from HDCAM-SR via Sony SR-5500 deck.
Deck's settings look fine, It plays the tape very well, I can see it from it's original display screen.
I think somethings wrong with my FCP setting.
I use FCP 5.1. When I say CAPTURE, I see the same image in viewer and in capture windos. if the viewer is black, capture win. is black too. I tried to change my display settings, but it didn't work.
I'm capturing it via KONA 3 card and 10 Bit Uncompressed.
This happened before, but I don't remember how I get rid of that...
thanks in advance

scs...
Can you take another shot at explaining this? I'm confused.
CaptM

Share Photos on the same iMac with different user accounts... How do You???

Hello,
I was wondering if there is a way to share photos with another user (same computer, different log-in names) on the same iMac?
There are two users on my iMac and I want to be able to share photos and other documents, music etc. with them, but can't seem to do it.
Please help.
Thank you.

What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. The problem here is that OS X works very hard to keep your data safe and secure from the other users. You're trying to beat what's built in to the system. So, to beat the system
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Lastly: This method seems a little clunky at first, but works very well. Most importantly, it uses the System to do the job for you.
Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
If you want to add photos to the Library: Log into the Media account for that purpose.
To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
No partitioning, no permissions issues. Uses no extra disk space. What's not to like?
Regards
TD

Creative cloud education on the same computer with different account

hi, I bought a 1 year creative cloud (education version) which will expire in few months. Perhaps I will skip to a different version or maybe not, still don't know. My question is: I have plans to sell my computer to a friend (student) and he would like to buy also a creative cloud (education version) and install it on that computer (or just use the adobe softwares already installed there and buy an education licence)...is it possible to do it or on a single computer (same ip) could run only 1 creative cloud installation?
I try to explain it in different words: is it possible to install adobe softwares (or use the already installed adobe softwares) on the same computer but with a new (and different account) creative cloud education version (once the previous one expired)?
thanks in advance for the reply

When you sell the computer to your friend, then you have to just deactivate the CC Activation & Deactivation Help , you do not have to uninstall Adobe CC, your friend needs to sign in with the Adobe ID under which he purchases the CC.
Regards
Rajshree

Confused about synching multiple phones to the same computer with different content: itunes wants to erase everything??

I have had an i5 for some time, but my partner just bought one to replace her 3GS. We both synch to my itunes, and have been doing so for as long as I can recall. When we got her i5, we backed up her 3GS and reloaded the content into her i5. So far so good. Now, this couple of weeks later, I decided I wanted to put some of the movies, music, etc. that I have on my itunes library on her phone. I had previous installed some of the apps that I have there without trouble. However, when I tell my itunes to put movies (etc) onto her phone, it warns me (upon apply) that this phone has been sync'ed to another itunes, and that I can do what I am asking, but it will erase everything on the phone now! I cancelled this op at this point.
As far as I know neither of us has sync'ed her phone to any other itunes, although she has probably downloaded stuff directly into the phone using the onboard itunes. Is that what it's warning me about? Is there any way to either pull the content off the phone, or merge the content with what she had locally downloaded? If not, I'm willing to sacrifice the few things that she had locally loaded as long as it's not going to, for example, erase all her photos, and contacts, and everything else as well at the same time!
This is all rather confusing to me. It's actually rather confusing that one can synch multiple devices with different settings at all, and I'm extremely surprised that it works at all. Can someone clarify what's going on here? What I should/shouldn't do? What I can/can't do?
Thanks in advance!

First make sure you have authorised the iTunes computer you are using for all of the associated apple ID's via the Store Menu>Authorise this computer and enter the apple ID and password used on the phone (repeat for as many apple ID's are in use on the phone).
Then right-click (or Control Click) on the name of the phone and select Transfer Purchases (this can also be found under File>Device>Transfer purchases). This will back up all of the purchases on the device to your computer, then when you sync with the phone it will put them back on even though it has just removed them.
Its a round about way of doing it but she shouldn't loose anything as long as the computer is authorised for all of the apple ID's used on the phone

Install many executable on the same PC with different names

Hello,
I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher or existing version is already installed in this computer"
I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
Thanks and regards,
Armindo PINTO

Hi Armindo,
Thank you for using the NI forums!
From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
install package with the same product ID number. That means, if the
deployed PC has the previous version installed, which had been
generated from the same project file, the new install package will
remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
means, the previous version will be no longer available on the deployed
PC. If you are creating an upgraded version to the product this is
fine.
However, if you need to re-use the LabView 8.x project
file and generate a new product, which can potentially co-exist with
the previous on the end user PC, you need to generate a new installer
with a different product ID number. One of the way to do it:
Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
Open the new instance of the project
Expand the "Build Specifications"
Right click on the installer specification, e.g. "name1 Installer"
Select "Duplicate" from the menu
You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
Make changes that are needed between the two versions, for example:
Select a new source VI
Build a new exe file
Reflect the new exe file in the "name2 Installer"
Make
any other changes needed in "name2 Installer", for example different
documentation files included in install, change in the target install
directories, changes in the start menu shortcuts. etc.
Build the install.
Please let me know if this solves the issue, and let me know how you get on.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

Saving the same image with different croppings for printing various sizes

Similar Messages

Maybe you are looking for