Saving to network in admin mode

My hard drive recently died and I had to reinstall Captivate 6 in the new drive running Windows 7. Upon doing so, I started seeing a Captivate message saying I must run as administrator in order to use all it's features. After checking the Windows settings on my computer it appeared I was already set up as administrator. Why is Captivate not recognizing my administrative status? Also, I noticed when I do run Captivate 6 as administrator, my network drive does not show up when I choose Save As. Why is this happening? Is there some additional setting in Captivate that has not been properly set?
Thanks,
Darin

Lieve is correct. Using the Save As command in Captivate to save a backup copy of your project file to a network drive is always a bad idea and can end up meaning that your backup copy on the network drive actually turns out to be corrupted when that day finally comes when you need it.
Use Windows Explorer to copy to your server ALWAYS.
If you ignore this advice, the risk is entirely your own.

Similar Messages

OIM_SERVER1 starting in Admin Mode

Guys,
Following Tasks(to upgrade Oracle Identity Manager from 9.x to 11g) from upgrade guide (http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm#CACIBHHJ) has been completed succesfully:-
•Task 1: Identify and Prepare Oracle Database for Oracle Identity Manager 11g (Optional)
•Task 2: Use the Repository Creation Utility to Create the Schema in the Database
•Task 3: Install Oracle Fusion Middleware
•Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema
•Task 5: Create a WebLogic Domain for Oracle Identity Manager
•Task 6: Start the WebLogic Administration Server
•Task 7: Configure Oracle Identity Manager Server 11g
•Task 8: Configure Node Manager to Start Managed Servers
•Task 9: Start the SOA Managed Server
In the below Task10 while starting OIM server, OIM_SERVER1 is starting in Admin mode ( i guess it should come in running mode).
"Task 10: Start the Oracle Identity Manager Managed Server"
Best Regards,
Manohar

Hi Kevin,
Thanks, pasting text from cammand prompt.
:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\antisamy-bin.1.3.jar;E:
\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-configuration-1.
5.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-fileuplo
ad-1.2.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\commons-lan
g-2.3.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\nekohtml-0.9
.5.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.owasp_11.1.1\xercesImpl-2.9.
1.jar;E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;E:\ORACLE~
2\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;E:\ORACLE~2\MIDDLE~1\WLSE
RV~1.3\server\lib\xqrl.jar
PATH=E:\ORACLE~2\MIDDLE~1\patch_wls1036\profiles\default\native;E:\ORACLE~2\MIDD
LE~1\patch_ocp371\profiles\default\native;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server
\native\win\x64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\bin;E:\ORACLE~2\MIDDLE~1\
modules\ORGAPA~1.1\bin;E:\Java\JDK16~1.0_3\jre\bin;E:\Java\JDK16~1.0_3\bin;E:\Or
acle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\Syste
m32\Wbem;C:\Program Files (x86)\Windows Imaging\;E:\Java\jdk1.6.0_32\bin;C:\Wind
ows\sysWOW64;E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8;E:\O
racle_11g\middleware_home\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_32"
Java(TM) SE Runtime Environment (build 1.6.0_32-b05)
Java HotSpot(TM) 64-Bit Server VM (build 20.7-b02, mixed mode)
Starting WLS with line:
E:\Java\JDK16~1.0_3\bin\java -client -Xms768m -Xmx1536m -XX:PermSize=256m -XX:
MaxPermSize=512m -Dweblogic.Name=oim_server1 -Djava.security.policy=E:\ORACLE~2\
MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.security.SSL.trustedCA
KeyStore="E:\Oracle_11g\middleware_home\wlserver_10.3\server\lib\cacerts" -Xver
ify:none -da -Dplatform.home=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\ORAC
LE~2\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\
server -Dcommon.components.home=E:\ORACLE~2\MIDDLE~1\ORACLE~1 -Djrf.version=11.
1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
-Ddomain.home=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=
E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dor
acle.server.config.dir=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMW
CON~1\servers\oim_server1 -Doracle.domain.config.dir=E:\ORACLE~2\MIDDLE~1\USER_P
~1\domains\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=E:\ORACLE~2\MIDD
LE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=E:\
ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Dora
cle.security.jps.config=E:\ORACLE~2\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fm
wconfig\jps-config.xml -Doracle.deployed.app.dir=E:\ORACLE~2\MIDDLE~1\USER_P~1\d
omains\BASE_D~1\servers\oim_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -D
weblogic.alternateTypesDirectory=E:\Oracle_11g\middleware_home\Oracle_IDM1\serve
r\loginmodule\wls,E:\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:
\ORACLE~2\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.ha
ndler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler
"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.
jdbc.remoteEnabled=false -DXL.HomeDir=E:\Oracle_11g\middleware_home\Oracle_IDM1
\server -Djava.security.auth.login.config=E:\Oracle_11g\middleware_home\Oracle_
IDM1\server\config\authwl.conf -Dorg.owasp.esapi.resources=E:\Oracle_11g\middle
ware_home\Oracle_IDM1\server\apps\oim.ear\APP-INF\classes -da:org.apache.xmlbea
ns... -Dsoa.archives.dir=E:\Oracle_11g\middleware_home\Oracle_SOA1\soa -Dsoa.ora
cle.home=E:\Oracle_11g\middleware_home\Oracle_SOA1 -Dsoa.instance.home=E:\ORACLE
~2\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Dtangosol.coherence.clusteraddress=227.7.
7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.x
ml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.tr
ansaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Dj
avax.net.ssl.trustStore=E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks
-Dem.oracle.home=E:\Oracle_11g\middleware_home\oracle_common -Djava.awt.headles
s=true -Dums.oracle.home=E:\Oracle_11g\middleware_home\Oracle_SOA1 -Dweblogic.ma
nagement.discover=false -Dweblogic.management.server=http://mapidmapn01:7001 -D
wlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -D
weblogic.ext.dirs=E:\ORACLE~2\MIDDLE~1\patch_wls1036\profiles\default\sysext_man
ifest_classpath;E:\ORACLE~2\MIDDLE~1\patch_ocp371\profiles\default\sysext_manife
st_classpath weblogic.Server
<Aug 22, 2012 5:30:27 AM GMT-06:00> <Info> <Security> <BEA-090905> <Disabling Cr
yptoJ JCE Provider self-integrity check for better startup performance. To enabl
e this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=tru
e>
<Aug 22, 2012 5:30:28 AM GMT-06:00> <Info> <Security> <BEA-090906> <Changing the
default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To d
isable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 22, 2012 5:30:29 AM GMT-06:00> <Info> <WebLogicServer> <BEA-000377> <Starti
ng WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.7-b02 from
Sun Microsystems Inc.>
<Aug 22, 2012 5:30:31 AM GMT-06:00> <Info> <Security> <BEA-090065> <Getting boot
identity from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Aug 22, 2012 5:32:43 AM GMT-06:00> <Info> <Management> <BEA-141107> <Version: W
ebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Aug 22, 2012 5:32:45 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to STARTING>
<Aug 22, 2012 5:32:45 AM GMT-06:00> <Info> <WorkManager> <BEA-002900> <Initializ
ing self-tuning thread pool>
<Aug 22, 2012 5:32:46 AM GMT-06:00> <Notice> <LoggingService> <BEA-320400> <The
log file E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\servers
\oim_server1\logs\oim_server1.log will be rotated. Reopen the log file if tailin
g has stopped. This can happen on some platforms like Windows.>
<Aug 22, 2012 5:32:46 AM GMT-06:00> <Notice> <LoggingService> <BEA-320401> <The
log file has been rotated to E:\Oracle_11g\middleware_home\user_projects\domains
\base_domain\servers\oim_server1\logs\oim_server1.log00022. Log messages will co
ntinue to be logged in E:\Oracle_11g\middleware_home\user_projects\domains\base_
domain\servers\oim_server1\logs\oim_server1.log.>
<Aug 22, 2012 5:32:46 AM GMT-06:00> <Notice> <Log Management> <BEA-170019> <The
server log file E:\Oracle_11g\middleware_home\user_projects\domains\base_domain\
servers\oim_server1\logs\oim_server1.log is opened. All server side log events w
ill be written to this file.>
Aug 22, 2012 5:32:54 AM oracle.iam.platform.auth.providers.wls.OIMAuthentication
Provider initialize
INFO: Authentication module initialized
<Aug 22, 2012 5:32:58 AM GMT-06:00> <Notice> <Security> <BEA-090082> <Security i
nitializing using security realm myrealm.>
<Aug 22, 2012 5:33:06 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to STANDBY>
<Aug 22, 2012 5:33:06 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to STARTING>
<Aug 22, 2012 5:33:29 AM GMT-06:00> <Warning> <oracle.jps.upgrade> <JPS-06003> <
Cannot migrate credential folder/key ADF/anonymous#oimBpelCredKey.Reason oracle.
security.jps.service.credstore.CredentialAlreadyExistsException: JPS-01007: The
credential with map ADF and key anonymous#oimBpelCredKey already exists..>
<Aug 22, 2012 5:33:34 AM GMT-06:00> <Warning> <oracle.adf.share.ADFContext> <BEA
-000000> <Automatically initializing a DefaultContext for getCurrent.
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initializati
on is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent
To see the stack trace for thread that is initializing this, set the logging lev
el of oracle.adf.share.ADFContext to FINEST>
<Aug 22, 2012 5:33:39 AM GMT-06:00> <Error> <Deployer> <BEA-149205> <Failed to i
nitialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.pla
tform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
Password for .xldatabasekey is not seeded in CSF.
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
Password for .xldatabasekey is not seeded in CSF.
at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAp
pInitializationListener.java:145)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.r
un(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListene
rAction.invoke(BaseLifecycleFlow.java:199)
Truncated. see log file for complete stacktrace
Caused By: oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
Password for .xldatabasekey is not seeded in CSF.
at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAp
pInitializationListener.java:145)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.r
un(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListene
rAction.invoke(BaseLifecycleFlow.java:199)
Truncated. see log file for complete stacktrace
>
<Aug 22, 2012 5:33:40 AM GMT-06:00> <Warning> <Munger> <BEA-2156203> <A version
attribute was not found in element application in the deployment descriptor in E
:\Oracle_11g\middleware_home\Oracle_IDM1\server\apps\spml-xsd.ear/META-INF/appli
cation.xml. A version attribute is required, but this version of the Weblogic Se
rver will assume that the JEE5 is used. Future versions of the Weblogic Server w
ill reject descriptors that do not specify the JEE version.>
<Aug 22, 2012 5:33:40 AM GMT-06:00> <Warning> <Munger> <BEA-2156203> <A version
attribute was not found in element application in the deployment descriptor in E
:\Oracle_11g\middleware_home\user_projects\domains\base_domain\servers\oim_serve
r1\tmp\_WL_user\spml-xsd\s8d2b9/META-INF/application.xml. A version attribute is
required, but this version of the Weblogic Server will assume that the JEE5 is
used. Future versions of the Weblogic Server will reject descriptors that do not
specify the JEE version.>
<Aug 22, 2012 5:33:40 AM GMT-06:00> <Emergency> <Deployer> <BEA-149259> <Server
'oim_server1' in cluster 'OIM_CLUSTER' is being brought up in administration sta
te due to failed deployments.>
Loading xalan.jar for XPathAPI.
05:33:57 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] -
----------------- NEXAWEB SERVER LICENSE ------------------
- Customer ID : 122
- License type : Enterprise
- Max unique IPs : unlimited
- Max XUL sessions : unlimited
- Max CPUs/server : unlimited
- Clustering allowed : true
- Expiration date : none
Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
Nexaweb Technologies Inc.
10 Canal Park
Cambridge, MA 02141
Tel: 617.577.8100. Email: [email protected]
05:33:57 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] - Clustering is OFF.
05:33:58 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] - Servlet Engine: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PS
T 2011 1441050 Oracle WebLogic Server Module Dependencies 10.3 Thu Sep 29 17:47:
37 EDT 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencie
s 10.3 Wed Jun 15 17:54:24 EDT 2011
05:33:58 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] - Servlet API Version: 2.5
05:33:58 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] - Nexaweb Server Info = Nexaweb Server 3.3.1072
05:33:58 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (
self-tuning)'] - Nexaweb Server initialized successfully.
<Aug 22, 2012 5:34:04 AM GMT-06:00> <Notice> <Log Management> <BEA-170027> <The
Server has established connection with the Domain level Diagnostic Service succe
ssfully.>
<Aug 22, 2012 5:34:04 AM GMT-06:00> <Notice> <Cluster> <BEA-000138> <Listening f
or announcements from cluster OIM_CLUSTER on 239.192.0.0:7001.>
<Aug 22, 2012 5:34:04 AM GMT-06:00> <Notice> <Cluster> <BEA-000133> <Waiting to
synchronize with other running members of OIM_CLUSTER.>
<Aug 22, 2012 5:34:07 AM GMT-06:00> <Error> <Cluster> <BEA-000166> <Some other c
luster in this domain is configured to use the same multicast address as OIM_CLU
STER. Clusters cannot use the same multicast address.>
<Aug 22, 2012 5:34:34 AM GMT-06:00> <Notice> <Security> <BEA-090171> <Loading th
e identity certificate and private key stored under the alias DemoIdentity from
the jks keystore file E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jk
s.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090169> <Loading tr
usted certificates from the jks keystore file E:\ORACLE~2\MIDDLE~1\WLSERV~1.3\se
rver\lib\DemoTrust.jks.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090169> <Loading tr
usted certificates from the jks keystore file E:\Java\JDK16~1.0_3\jre\lib\securi
ty\cacerts.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2
009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,
O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a cer
tificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier obje
ct: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, I
nc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.
,C=US". The loading of the trusted certificate list raised a certificate parsing
exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.1135
49.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Ce
nter,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted cert
ificate list raised a certificate parsing exception PKIX: Unsupported OID in the
AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Ce
nter,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted cert
ificate list raised a certificate parsing exception PKIX: Unsupported OID in the
AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3
". The loading of the trusted certificate list raised a certificate parsing exce
ption PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.
1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Syste
ms CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certifi
cate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object:
1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU
=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=
VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a cert
ificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier objec
t: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The l
oading of the trusted certificate list raised a certificate parsing exception PK
IX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Security> <BEA-090898> <Ignoring t
he trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(
c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loadi
ng of the trusted certificate list raised a certificate parsing exception PKIX:
Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Server> <BEA-002613> <Channel "Def
ault" is now listening on 132.189.236.47:14000 for protocols iiop, t3, CLUSTER-B
ROADCAST, ldap, snmp, http.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <Server> <BEA-002613> <Channel "Def
aultSecure" is now listening on 132.189.236.47:14001 for protocols iiops, t3s, C
LUSTER-BROADCAST-SECURE, ldaps, https.>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000332> <Star
ted WebLogic Managed Server "oim_server1" for domain "base_domain" running in De
velopment Mode>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to ADMIN>
<Aug 22, 2012 5:34:35 AM GMT-06:00> <Notice> <WebLogicServer> <BEA-000360> <Serv
er started in ADMIN mode>

Existing wireless network in client mode

Hi,
I' m trying to join my existing wireless network in client mode. I' ve followed the directions of "AirPort Express: How to join an existing wireless network in client mode"(http://docs.info.apple.com/article.html?artnum=302153) with success, but when i try to play a song, itunes can' t join the network. I' ve try to configure it again but airport admin utility can' t scan it.
Thanks

Hey I am having the same problem.
I have a home network with a netgear router I am following the instructions to join the existing network. After I join I can play music over airtunes but I do not have Internet access. I restart the Airport Express and then my computer and now I get Internet access but I can see there is a base station connected but it timesout when I try to connect to it.
What did you do to fix it?

Very slow ADMIN gui (/console) and ADMIN mode problems

The admin gui is painfully slow for us for some reason. We're currently running three clusters in on one admin server. There are 55 applications installed spread out pretty evenly on all clusters.
Listing the 10 first deployed applications takes around 50-60s. CPU usage and so forth is fine. This seems to get worse when more applications are added. Some of our other admin servers works fine but they have far less applications installed.
Perhaps not much to go from but has anyone else experienced this ? Possibly cause, solution ?
Note:
version: 10.3
jdk: 1.6_06 (64 bit)
os: solaris
We're also experiencing some serious problems when deploying application, possibly because of the problems with the admin server and that the deployment sometimes just halts (activate changes times out). Servers can all of a sudden be in ADMIN mode, applications can be in ADMIN mode. And servers and/or applications in ADMIN mode is not a good thing since the load-balancers can't handle this situation because the server still listens on the http port while in ADMIN mode. Not sure why this happens but it seems to be connected to when we deploy application, and that part seems to be a hit'n miss thing. It works perfectly sometimes, sometimes it justs halts. A restart of the admin server and then it might work again. Other times it's a restart of all the servers and then the admin server before it works again.
Same as the first question, anyone that has experienced these problems ?
/Laban

Support has "support patterns" to work through these issues and I definitely recommend opening a case. Various things can contribute such as networking issues causing the clustered communication to not work properly. Thread dumps can also be helpful to see where the time is being spent.

WSM Managed server starts in ADMIN Mode after upgrade to 11.1.1.7

We have just upgraded our 11g SOA Cluster environment from 11.1.1.4 to 11.1.1.7. The issue is after the upgrade, our WSM servers are starting to ADMIN state with following error.
<Sep 25, 2013 7:14:35 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'DMS Application [Version=11.1.1.1.0]' due to error weblogic.application.ModuleException: Failed to load webapp: 'dms.war'.
weblogic.application.ModuleException: Failed to load webapp: 'dms.war'
Caused By: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@381802823[app:DMS Application module:dms.war path:/dms spec-version:2.5 version:11.1.1.1.0]", defined in weblogic.xml [Extension-Name: jstl, Specification-Version: 1.2, Implementation-Version: 1.2, exact-match: false]
at weblogic.servlet.internal.WebAppServletContext.processWebAppLibraries(WebAppServletContext.java:2750)
Our cluster environment has one Admin Server, and two of each OSB, WSM and SOA managed servers. As our WSM servers are not coming up, we are not able to start our SOA servers too.
Thank You

Same issue here :-)), Just playing around with policies configuration, the server was running just fine, I wanted to check if the policies are applicable during runtime even the WSM managed server is down. After restart, it started in ADMIN mode, well the solution is straight. It is exactly telling that the dms application is missing the jstl library reference
<Error> <Deployer> <iwpdcdevsoaa.iwater.ie> <WLS_WSM1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <bcfaf10ec8fbdfc2:-26d85d29:1429ffae24c:-8000-0000000000000003> <1385663491675> <BEA-149205> <Failed to initialize the application 'DMS Application [Version=11.1.1.1.0]' due to error weblogic.application.ModuleException: Failed to load webapp: 'dms.war'.
weblogic.application.ModuleException: Failed to load webapp: 'dms.war'
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)
        at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
        at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
        at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
        at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
        at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
        at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
        at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
        at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
        at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
        at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@384044243[app:DMS Application module:dms.war path:/dms spec-version:2.5 version:11.1.1.1.0]", defined in weblogic.xml [Extension-Name: jstl, Specification-Version: 1.2, Implementation-Version: 1.2, exact-match: false]
        at weblogic.servlet.internal.WebAppServletContext.processWebAppLibraries(WebAppServletContext.java:2750)
        at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:416)
        at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:494)
        at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)
        at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:976)
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384)
        at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
        at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
        at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:44)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
        at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
        at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
        at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
        at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
        at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
        at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
        at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
So search for "jstl" within the weblogic console in search bar, it is type of library, click on it and target it to the managed server where OWSM is running as weel. It was root cause in my case, somehow the library was not targeted to our WLS_WMS1 managed server. Now the server is back in RUNNING mode. Of course apply this in case of problem with SOA servers, target it to the cluster or exact nodes and it should work.
Still I don't know how the issue has been crated, I don't think that somebody removed it from deployment. Rather I think that somebody was applying patch or some artifacts to OSB or SOA managed server and this library was required as well, but as soon as we have separated WSM cluster, it was maybe assuming that it is running within OSB or SOA clusters and therefore didn't target the WSM cluster automatically. But this is just the idea :-))
Ladislav

Updating only when using Admin mode (since 3.6) and "ghosting" leaving images of others sites, apps, even pdfs I have opened in a browsing session that you can see when you shut FF down.

I can update FF while in admin mode but when I switch back to my user log-in it says I still need to update and has been this way since 3.6 at least.
FF is also leaving ghost images from other apps as it is shut down you can see, not sure if it is a memory leak or what but it is a little annoying.

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

Opening a PDF file in Admin mode from a windows forms application (C#)

Hi,
I need to open a pdf file using Windows Application. I have used the below code launch the pdf files.
Process prc = new Process();
            prc.StartInfo.FileName = "cmd.exe";
            Environment.CurrentDirectory = @"C:\SamplePDF\";
            prc.StartInfo.Arguments = " /C sample.pdf";
            prc.StartInfo.UseShellExecute = false;
            prc.StartInfo.CreateNoWindow = true;
            prc.Start();
This code is working fine without admin mode. But while running the output exe from bin folder with admin mode(right click the exe and choose "Run as Administrator"), pdf files are not launching . But its opened in the background application and I can see this from windows task manager.
Could anyone please help me on this issue ? Is there any other ways to launch a pdf file in admin mode ?
-Balaji.

Thank you for replaying so soon..
Well you are right by using a widget and etc.. but the problem is that I have been told that this application should open a PDF file that has bookmarks to each chapter of the text and one can make a search on this text by using pdf search.. So I do not have any other choice than opening a pdf :D and my time is unfortunately limit.
For solving the problem that the user may not have PDF reader.. well I have been told that user should install the pdf reader, so in my application package I am putting the installation file of PDF.
But going back to my problem.. I guess is someway I have to get the OS type of the user and I have to do a SWITCH or something on the OS type and then change the content of the Runtime.exec(). But the question is how can I get the OS type and what should I change in Runtime.exec().
So now any idea? any solution??

How to get installer created via LV project to install executables on a Vista machine which are in admin mode?

I have an installer for a program created via a LV project which installs two executables.
On Vista, only one of the executables is in admin mode. So, I always have to right click
on the other and select 'run as administrator'.
Any way of getting both of them set to run as administrator by default?

Do your executables include a manifest inside them or are you installing a manifest file next to your executables?
What happens if you just manually copy the executables to your system rather than installing them? Same thing, or different behavior?
-Bob

IMac no longer connecting @ 270 mbps on 5GHz n Network in wide mode....

Hi everyone,
Hoping someone can shed some light on this.
I have a wrt610n dual band n router. Up until a few weeks ago all my n enabled devices were connecting at speeds of upto 300 mbps (except the iMac which would only ever reach 270 mbps).
Now the iMac will only connect at 130 mbps max. Both network utility and alt clicking on the wireless icon in the menu bar read a rock solid 130 mbps, whereas a few weeks back it was a rock solid 270 mbps.
I have been through all the usual rigmarole of checking settings on the router, re-flashing, deleteing all existance of wireless networks on the iMac etc.
No matter what the iMac will still only get 130. I can put my 2 laptops next the iMac and they will both hold rock solid speeds, in excess of 200 mbps for the HP and 300 (yes 300) mbps for the MBP.
I know for a fact my router hardware is set to wide (40 MHz), and that it is the 5GHz band I am connecting to. I am using WPA2 Personal AES for security. I have been through fiddling with the Beacon Interval, RTS and Fragmentation Thresholds as suggested in other posts around the net, even forcing the mcs to 15:270 mbps etc etc, all with no avail.
Before anyone starts, it's nothing to do with the country I am in, or inflated speed quotes by manufacturers, 300 mbps is realised for me so be sure I am not dreaming of theoretical maximums.
This network throughput was excellent, capable of streaming full 1080p HD to the Xbox whilst numerous other transfers are taking place, now this glory is no more.
Basically it was connecting at 270 mbps in this location with the self same settings, and now it is not. So far as I can remember nothing has changed drivers wise on the iMac...
In case it is of help I have grabbed this from system profiler.
Software Versions:
Menu Extra: 6.2.1 (621.1)
configd plug-in: 6.2.3 (623.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1.1 (311.1)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x87)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.27)
Locale: ETSI
Country Code: X3
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
Status: Connected
Current Network Information:
dehouseofting_N:
PHY Mode: 802.11n
BSSID: 0:22:6b:86:3a:27
Channel: 40
Network Type: Infrastructure
Security: WPA2 Personal
Signal / Noise: -63 dBm / -91 dBm
Transmit Rate: 130
MCS Index: 15
Other Local Wireless Networks:
dehouseofting:
PHY Mode: 802.11n
BSSID: 0:22:6b:86:3a:26
Channel: 5,1
Network Type: Infrastructure
Security: WPA2 Personal
Signal / Noise: -56 dBm / -88 dBm
Thank you in advance for any help

have I really extinguished all possibilities? Does anyone have anything so say?

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password

Weblogic starting in ADMIN mode for Epmserver0...11.1.2.3 version

Hi All,
I have installed Hyperion 11.1.2.3 version with sql server 2008. after configuration .. services are up and running.But i'm unable to login to worskpace/shared services.
i tried login to weblogic. under servers epmserver0 in running in ADMIN mode...insted of runnin mode.
also EPMA services are not starting...
Can anyone give me the solution for this 2 issues...
Regards,
Ravi

user9060912 wrote:
Hello hyperionEPM...
Firstly thank you very much for your help.
I haven't check the forum due some prob... pls dnt says like this... i have marked helpful for your post.
once again thank you hyperionEPM.
One more thing... please try to help the people if you know the answer and dont expect anything from them.they will automatically do this.
and about my questions analysis ... please don't do like this to anyone.
thanks for you big big help...I am not here to fight, so relax... :)
Sorry to say but you shouldn't be saying all this...After all points encourage users on the forum to answer to your queries..
Thanks,
hyperionEPM

Files saved to network server sometimes get deleted

Hello,
I work as a graphic designer using a year old iMac and latest version of Photoshop CS5.
Every now and then when saving a .psd file with photoshop it will get deleted instead. As an example, lets say I'm working on a brochure cover image. I open photoshop, open the file and work couple of hours on it. Then I save it. File gets deleted and is now no where to be found. Assuming no backups it's lost for good.
Naturally I use backups so this usually only means I've at most lost a days worth of work, but it's still highly irritating as you can get quite a bit done during one day.
What I've figured out so far:
1) Only .psd files get deleted and only by photoshop. Illustrator, Premiere, Indesign are unaffected.
2) Only files that are being saved on network (Buffalo) drive get deleted. Files saved on my macs hard disk have not gone lost so far.
3) It seems that when I use "Save As" the files save correctly. Only when using "Save" do they get deleted.
4) File getting deleted does not happen every time. But it does happen around 20-30% of the time when saving.
My current solution is to keep file browser open at all times. And every time I save file with Photoshop I check it's still there. If it's been deleted I will save it again with new name. As long as it's still open in Photoshop I can still save it.
Due to my work place, saving on the Buffalo is currently the only realistic solution. I realise this is not a Photoshop only problem. It has a lot to do with the network drive as well. How ever as Photoshop is the only program affected it seemed like a good idea to post it here as well. We've been in contact with Buffalo and they deny any knowledge about this problem, so we've hit a brickwall there anyway.
Has anyone else run into this or similar problem? Any suggestions besides taking more backups?

2) Only files that are being saved on network (Buffalo) drive get deleted.
There you have it – Adobe’s position with regard to Photoshop is: »Adobe Systems does not provide support for networks and removable media.«
http://kb2.adobe.com/cps/406/kb406793.html
http://kb2.adobe.com/cps/902/cpsid_90279.html
In case you are interested there are threads on this, for example
http://forums.adobe.com/message/4016082#4016082
One workaround might be to always do Save As’ as you claim those work; this could be automated with a Script for example.

Weblogic managed instance started in "admin" mode.

Hi,
I tried to startup a managed instance for my cluster and it was started in "admin" mode and not "running" mode. I am using WLS 9.2.
Saw some error messages in the weblogic logs related to Database. Could it be the reason for that?
Thanks.
Vincent
####<Mar 18, 2013 9:39:02 AM SGT> <Info> <JDBC> [ACTIVE] ExecuteThread: '2' for
queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1363570742322> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
        at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOsesskey(T4CTTIoauthenticate.java:293)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:357)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:300)
        at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:204)
        at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1076)
        at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1000)
        at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:1870)
        at weblogic.common.resourcepool.ResourcePoolImpl.access$800(ResourcePoolImpl.java:37)
        at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePo
olImpl.java:1984)
        at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:265)
        at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Sri Mud <> wrote:
Hi,
I am trying to start a Managed server running on WLS9.2 when the Admin
server is down. I am using the following:
./startManagedWebLogic.sh <Managed server name> <Admin URL>
I am getting the following error:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: failed to connect to server ldap://<Admin
URL> (91)Hi,
Did you activate the managed server independent mode? (msi replication)
If you, did you find those files on the managed server?
rgrds,
Bart
Schelstraete Bart
[email protected]
http://www.schelstraete.org
http://www.linkedin.com/in/bschelst

BI_server in Admin Mode

Hi friends,
When i tried to open my OBIEE 11.1.1.5 which is installed in my windows machine, by starting the BI services through Start-->Program-->Start BI Services, the BI services is not coming to an running mode, as it seems that
BI presentation services is down. We analysed about this problem, and when we seen under the servers section in my weblogic domain i have two servers
<li> Admin Servers
<li> BI Servers
Admin Servers seems to be in running mode, but the BI Servers is seemed to be in ADMIN mode. and we though that due to this only my BI presentation service is getting down. Can anyone friends, try to help me out with this issue.
On how to make my BI Servers back to the running mode in the weblogic console under the server section during the start up of my BI services (via) Start-->Program-->Start BI Services.
Is im missing anything.
Thanks in Advance
Brgds,
Hari

It look like another instance of weblogic is running some where in your processes.
When the server starts it checks if any .lok file in present in the tmp file.If yes, it would try to acquire a lock on that one.
If the lock is already held by some other process, then it would throw error.Check the running processes which can acquire lock on the .lok files and kill them.
If you are running in on unix use the commands below to kill java and weblogic services.
ps -ef | grep "java" or ps -ef | grep "weblogic" and kill everything .
If you are running on Windows PC , go to task Manager and kill all javac and weblogic instances, and restart weblogic using startweblogic.cmd and then startManagedWeblogic.cmd.
Does your logs say any specific error .?
Let me know.
-VS
Edited by: 925007 on Jul 12, 2012 2:16 PM

How to stop B2B listener polling when SOA server in Admin Mode

Hi ,
I recently came across this situation like my B2B FTP listener is polling and deleting file when my SOA server is Admin Mode.
Can anyone help me to stop that polling when server is in Admin Mode ?
Thanks,
Saba

thanks for quick reply...
the "catch (IOException e) {... } " block in Server already catches this exception, and as there is no other code but printing the exception, the method run() is quitted (no need to terminate the loop). However, the thread is NOT terminated even after that. To make it sure, I added a public variable and accessed it from Handler at the end of the code, after sd.resetSock(); !!!
You told that it doesn't stop because of the way I coded it, isn't it the traditional way of setting a listener socket? If no, may be recoding the listener would be much better...

Saving to network in admin mode

Similar Messages

Maybe you are looking for