Saving Variant on BEx Browser

Hi All,
We are using 3.5 version. In Analyzer when you open up a query, you have an option of saving the Variant screen so when you open the query again you can load the same variants by clicking there. Do we have that choice in BEx Browser to save the variant while accessing it from Browser? And if yes then how do we do that? FYI we have 3.5 BEx browser.
Thank you for reading and answering in advance.
JM

Hello,
Bex Browser is for arranging queries and related objects.
Once you execute it opens the underlying query or view etc...
once the query is executed you can provide the variant on the selection screen.
regards,
Lax

Similar Messages

  • BEX browser saving in favourites problem

    Hi gurus,
    we are recently migrated to  Bi 7.0. But the users are still using  BW browser. Users are able to save the reports to their favourites.Now in favourites they want to arrange the reports in a convenient manner.when they save the changes and refresh the browser the changes are not reflected.
    how to proceed.

    Rajesh,
    When you saw their changes are not reflected, do you mean that when the users move their favourites objects into a particular layout on the Bex Browser page it doesn't hold this?
    We have this issue also and it's become so frustrating for the users that they have given up using the Browser and they just go straight for the Analyser instead.
    Only one thing I can suggest is to concentrate on creating folders in the left hand panel in the Browser and put files into them as a system rather than creating groupings on the display page as they will end up all over the place as you have found.
    Regards
    Gill

  • Bex Browser layout changes

    Hello Gurus,
    We are using BeX browser [3.x version] as a launching pad for our BW queries. In one of the application area's, we have a main  role and within that 3 sub-roles. The layout of these sub-roles and the reprts under them in the browser are as follows. Role 1 is present in the left hand top corner of the browser. Role 2 is in the right hand top corner while Role 3 is below role 2 in the right hand side. Now Role 2 has got many reports under it and it so happens that the reports in the role 2 overflow and merge with the reports in Role 3 in the browser. The users now find it difficultto launch those reports at the bottom of Role2 & on the top of Role 3 as they appear mergerd together.
    Now we were able to move Role 3 to appear under Role 1 in our development system [the browser in our production system is locked for changes] and were able to save it. But my question is, how do I move this change from Development to Production? I don't find any option to create a transport request in the browser.
    Do I need to save the main role in a transport request, then make the changes in the browser and save it? Will my changes to the browser layout be saved in a TR if I do the above steps?
    Thanks
    Arvind

    Ehab Mansour 
    I am face the same problem  that I create a input reay query base on a real time infocube's aggregation level and set properties that can input ,but final I excute this query that I can not change data,that is why.
    appreicate you help very very

  • Adding workbook in Bex Browser

    Hi
      My requirement is i have to add a new workbook under a particular role in Bex Browser How can i do that please help with the steps
    Thanks
    Sheetal

    Sheetal,
    Bear in mind that you will need designer access to add a workbook to a role.
    Do you know you can also add a workbook to a role from the BEx Analyser? When you workbook is to be saved just select Save - New Workbook - and place it in the required role. It will appear in the Browser in that role.
    Regards
    Gill

  • Bex Browser Views

    Hello,
    We're experiencing an issue when user goes into the BEx Browser and saves a View. The problem is that the View is automatically saved to the "InfoArea". There is no option to save to "Favorites".
    Is there a way to prompt the user to choose either "Favorites" or "InfoAreas"? prior to the saving the View? Any information will be greatly appreciated.
    Kind Regards,
    Jason Chuang

    I am not as concerned about whether it is saved as a workbook or view. If I select Save a New Workbook in BEX Analyzer, it allows you to save in Favorites. When I select save in BEX Web, it does not give me an option and saves it under Roles.
    I just want users to be able to save workbooks, views, etc. to their Favorites folder and not under the public roles.
    Any insight would be much appreciated.
    Thanks,
    Wes

  • Arrange workbooks in BEx Browser

    Hi all,
          We are facing a problem arranging the workbooks in BEx Browser. In some folders we have many workbooks and these are just sitting on top of another. I tried to arrange them manually or with the properties option, but even then we still have many workbooks and the Users are having a tough time looking at them. I do not see any scroll bars that will make the window grow according to the number of workbooks.
         Do we have a option to set up the scroll bar in the Browser window so that the workbooks wont overlap or any other option to list the workbooks.
    Thanks,
    Prabhu.

    Hi,
    You can assign workbooks to roles and assign roles to users. After that a person can login to the Bex Browser and based on the roles that he/she has see only those workbooks.
    using tcode PFCG you can create what you want: assign roles to specific users. after saving workbooks under role and a role's menu item a user depending on his/her roles will see only what was allowed.
    check this sap help...
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a54cee09411d2acb90000e829fbfe/frameset.htm

  • What is difference between bex analyser and bex browser

    what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

    hi
    Bex Browser
    The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
    Document types that you can work with in the BEx Browser are:
    · BW workbooks
    · Documents that are stored in the Business Document Service (BDS)
    · Links (references to file system, shortcuts)
    · Links to internet sites (URLs)
    · SAP transaction calls.
    · Web applications and Web templates
    · Crystal Reports
    Bex Analyser
    The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
    Features
    You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
    Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
    You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
    Overview of the Functional Area of the BEx Analyzer:
    ·        BEx toolbar
    You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
    ·        Evaluating Query Data
    The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
    Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
    ·        Queries in Workbooks
    Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
    When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
    You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
    ·        Precalculating workbooks
    You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
    Activities
    To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
    You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
    Hope this will solve your issu
    nagarjuna

  • Replacement for BEx Browser in BI 7.0

    Hello.
    I'm at a customer that will upgrade their system from BW 3.1 to BI 7.0.
    Nowadays they have a lot of workbooks published in the BEx Browser.
    I understand the BEx Browser is not longer available for use in NW04s - BI 7.0.
    How can I have the same functionality of BEx Browser ( a single point of entry for all my workbooks) in BI 7.0?. is it a mix between KM and the BEx Broadcaster?.
    They needed a "pull tool" and the BEx Broadcaster is a "push tool". doesn't it?
    Kind regards
    Rebeca

    Hi,
    You can also look at implementing bNavigator which has been developed by <a href="http://www.entelsoft.com/">Entelsoft</a>, as a BEx browser replacement.
    bNavigator does not aim to compete with the Enterprise Portal - rather it is complementary with some unique advantages. It has "Powered by Netweaver" certification for installation in the Enterprise Portal or it can run standalone on the SAP Netweaver J2EE Application Server that comes with BI 7.0.
    More information can be found at <a href="http://www.bnavigator.com/">www.bnavigator.com</a>.
    Cheers
    Adrian
    [P.S. I work for Entelsoft, so my apologies if this comes across as a shameless plug :)...Please feel free to take any discussion on bNavigator off-line, by submitting your queries via the [url=http://www.entelsoft.com/]Entelsoft Website[/url]

  • BEx Browser content in KM

    We have used the BEx Browser extensively over the past 10 years to keep track of all our queries, links and workbooks.
    Now we are taking the first steps towards the use of KM. And we face the problem of accessing all these queries through a KM file.
    We can broadcast a query or publish it to the portal. Easy enough. But we have several thousand and accessing them one by one is.............time consuming.
    So the question is, if it is possible to create a KM portofolio that points to the BI server where the existing BEx Broser structure are, presenting them to the endusers.
    Frank Carlsen
    Business Intelligence section
    Danish defence IT Agency

    I'm not a BI Consultant, so I don't know the Bex Browser but what I found at SDN is that is is possible to call it via ITS (WebGui)... as the Portal supports Transaction Iviews you could try that...
    Please note that the notes reffering to the use of Bex Browser in the web are very very old:
    - BEx browser in the Web (SAP Note Number: 318352 )
    - Use of the BEx browser in the Web with a logon (SAP Note Number: 535561)
    But I would strongly reccomend you to look at the possibilities that SAP intended to use in combination with Portal and KM otherwise you will get in trouble if SAP stops the support on the Bex Browser...
    For more info and a detailed comparison matrix what is possible look here:
    http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
    Cheers,
    Benjamin

  • Input of Multiple values in BEX Browser

    Dear All,
    Can I input multiple values i.e Can I copy values from a excel or a data base which are at random and paste in BEX Browser as a input variable. is there any way to do this operation.
    Note:- Values need not be in series as stored in table.

    Hi Abhijit,
    I hope u are asking about input multiple values in data selection of the Query (Infact at selection screen, where u input the value for the query).
    Well u can do this if u are using BW3.5 or Above. What u need to do is copy all those selection values from Excell sheet then at selection screen u have to there is a button of multiple copies which will suck values even more than 12 in numbers.
    This functionality is perticularly benefial when u want to check the status BW for randon numbers of document numbers.
    Hope this works for u.
    Kindly assign the points if u feel this solution workable for u.
    Regards.
    Sunil Tayade Alias Sun Raj .

  • Hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files

    hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files. I feel like it interferes with iPhoto as well because it says it is locked and I have no rights to view it. I wanted to see if anyone else had/s this issue and how you fixed it before lugging it into the apple store and being without a computer for a few weeks...

    A few other suggestions here as well:
    http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

  • Workbook in Bex Browser

    Hello Gurus,
    When user opens Bex Browser and try to drag the workbook on to the windows desktop it creates a shortcut for the workbook on the desktop.  But when double click on it it doesn’t open up the workbook. 
    But the same thing work fine for the queries.  Does anybody encountered such problem. Pls help.
    thanks
    jose

    Hi Jose,
    The problem is the way a workbook is opened from the bex browser when you click on it.
    When opening the bex workbook, it tries to reuse the existing bex browser sapgui connection to connect to the bw server.
    So even though a shortcut to the workbook is created there should be the bex browser open and connected to the system, so that the bex analyzer starts and tries to establish a connection to the bw server using the same rfc connection.
    In the case of queries that you refer to, i suppose the shortcut just points to the web url of the query, which is then executed in the internet explorer.
    So in your case does the shortcut at least open the bex analyzer ? and can you see that the bex analyzer is connected to the server ? if not then at least you should be prompted to logon i suppose..
    Best Regards,
    Dabre

  • BEx Browser BEx Workbook: No "Insert Entire Row" Option

    We have a workbook with 2 queries embedded in it. Query 1 starts on Row 10 and Query 2 starts on Row 15. When the workbook is launched from Analyzer, we receive a popup window that has the title "SAP BEx: Not Enough Cells to Display Results" and it provides us with 3 options:
    1) Overwrite Existing Cells
    2) Insert cells below the results area
    3) insert entire rows
    When we launch the same workbook through BEx Browser, this popup window does not appear, which causes the results to be displayed in error.
    I was wondering if anyone came across this situation and what was your fix.
    We do not have the option of moving the queries to separate tabs on the workbook.  We have also attempted to write a macro that would launch both queries with many, many rows between them and then have the macro delete the blank rows in between them so that the two queries are together in the worksheet.  But the issue here is that the macro works when we launch the Workbook through BEx Analyzer, but when the same workbook is launched through BEx Browser, the macro is not processed.
    Thanks for your help.

    Hi P-Dup,
    Just pass by and see this thread, maybe this helps you: I have the same issue, I simply remove the query from its worksheet, create a new worksheet and insert this same query in the new worksheet. It works then for me. (You might reuse the same worksheet, but I prefer clean one).
    Please note that if you have other worksheets with formula refering to this query, the query worksheet should be copied to another worksheet and these formula should be link to this result worksheet (search and replace). It is not good to refer directly to the query worksheet though. Otherwise you would loose the references.
    Hope that helps you.
    Cheers
    Hoang

  • How to change color in BEx Browser?

    Hello Friends,
    How to change color in BEx Browser?
    My browser shows all the report description with pink color. I want to change the color.
    Please let me know.
    Thanks in advance.

    Hello Bhavin,
    It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
    However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
    It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
    Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
    The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
    Best regards,
    Pat M.

  • Hide folder in BEx-Browser

    Dear all,
    We still use the BEx Browser 3.x (based on Backend SAP BI 7.0). In folder-structure on the left side we see also folders based on roles which are designed for using in web - and should not used under BEx Browser.
    Does anybody know how to hide these folders in BEx Browser?
    Best regards
    Daniel

    Hi,
    The documentation says that once personalization has been activated it cannot be deactivated again. (personalization being Bex history, variables and web templates).
    You could try unchecking the checkboxes in SPRO, although I don't think it will work...
    Also check this link..
    Hide Favorites and History in BEx
    Hope this helps u.
    Best Regards,
    VVenkat..

Maybe you are looking for