Saving video issue

Yesterday I got a text message w/a short video in it. I clicked "save video" and figured it would show up in my camera roll. If I pull up the picture screen, the shot on the camera roll is of that video and it says something like X number of pictures in roll. However, when I open up the roll it says I have fewer number of pictures and the video isn't there.
What is going on with that? Anyone have any idea how I can fix this?
thanks

For the Audio Assets, the best that one can do is to use PCM/WAV, and use any number of audio-editing programs to convert that.
Still, your error is "Return a Video Frame." That indicates an error in the Video portion of the Timeline.
Besides gaps, do you have any overly large still images?
As for any gaps, did you use the method outlined in the linked article? They can be very hard to see, even when zoomed into the max view (Frame View).
I still did not see the CODEC of the used AVI files. Can you provide that please, as it might make a differenece?
Good luck,
Hunt

Similar Messages

  • After recording video - stuck on "Saving Video"

    I just got an iPhone 4 a few hours ago. Whenever I try to record a video it seems to work fine. But once I try to watch it, it says "Saving Video" and it won't do anything else until I press the home button to get out of it. I have let it sit for five minutes thinking that maybe it's processing something, but it just goes and goes.
    Anyone else have this issue?

    Never mind, I should have figured this out a lot faster - it's called reset the phone and now it works. lol

  • Jabber for iPad video issue

    How can I troubleshoot video issues?
    I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
    Is Jabber for iPad going to support G729 and if so when?
    Thanks,
    Doug

    Hello i have the same issue!
    Someone find the cause for this issue?
    Regards
    Leonardo Santana

  • Kernel Panic on iMac with Pixelated Video Issues

    One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
    Interval Since Last Panic Report:  8641685 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    E865F049-A575-4D59-A574-9D24C6EFD141
    Fri Mar 30 07:35:41 2012
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
    0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
    0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
    0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
    0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
    0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
    0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
    0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
    0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
    0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
    0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
    0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
    BSD process name corresponding to current thread: Dock
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: iMac6,1 (Mac-F4218FC8)
    System uptime in nanoseconds: 154254231492
    unloaded kexts:
    (none)
    loaded kexts:
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 121081986701
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.InternalModemSupport          2.6.2
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleIntelYonahProfile          14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleIntelPenrynProfile          17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleIntelNehalemProfile          11
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleGraphicsControl          2.10.6
    com.apple.GeForce          6.3.6
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.CSRHIDTransitionDriver          2.4.5f3
    com.apple.driver.USBCameraFirmwareLoader          1.1.0
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AirPortBrcm43xx          423.91.27
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.AppleYukon2          3.2.1b1
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBUHCI          4.2.0
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleHDAController          2.0.5f14
    com.apple.iokit.IOHDAFamily          2.0.5f14
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.nvidia.nv40hal          6.3.6
    com.apple.NVDAResman          6.3.6
    com.apple.iokit.IONDRVSupport          2.2.1
    com.apple.iokit.IOGraphicsFamily          2.2.1
    com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.iokit.IOATAPIProtocolTransport          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.driver.XsanFilter          402.1
    com.apple.driver.AppleFileSystemDriver          2.0
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.TMSafetyNet          6
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST3320620AS, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-85J
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8501, 0xfd400000 / 2
    USB Device: Express USB2, 0x0dc4  (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x1d100000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc50a, 0x1d110000 / 4
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x1d130000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8206, 0x7d100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8240, 0x7d200000 / 3

    Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
    27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) 
    I did that and it doesn't work

  • HT5313 What video issues were there on 10.7.4 that got fixed in 10.7.5? Any details?

    The OS X update bulletin for 10.7.5 lists that one of the fixes in this update is
    * Resolve a video issue with some VGA projectors when connected to certain Mac notebooks.
    What is really being addressed? Any details?

    Hi Tony, Ben and others,
    I'm not sure it was the same problem, but a little while ago I have problems too with RADIUS not working on Lion,
    and by searching for solutions I found out that it's necessarily to edit /etc/raddb/clients.conf
    My problem here it didn't work was with the shared secret.
    So I edited /etc/raddb/clients.conf and put at the end of the file :
    client  10.0.0.0/24 {
            secret          =  shared-secret-type-what-you-want-here
            shortname       = private-network
    BEFORE I started RADIUS and added AE's to it
    I hope it solves your problem too …
    GreetingZz John
    PS For some strange reason I had to change the
          'Wireless Security" from WPA2 Personal ---> WPA2 Enterprice on each AE manualy
         But maybe that's just a little bug in when opening the AE in Airport Utility 6.1 cause is WAS
         working before I looked into the AE's
    PPS iPV6 not changed here
    Message was edited by: Abhor

  • I received a message on my iPhone 4 that has a video attached to it. I "saved video" but don't know where. How do I find it and send it to mi MacBook Air?

    I received a message on my iPhone 4 that has a video attached to it. I "saved video" but don't know where. How do I find it and send it to mi MacBook Air?

    It would have saved to your camera roll.  Connect the phone to your Air via a USB cable and then run Image Capture which is located either in your Utilities folder or Other folder, depending on what version of Mac OS X your are running.  You will then see all the photos and videos stored on your iPhone and can then download them.

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • Video issues in mac os 10.6.4 and windows 7 64x

    To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
    My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
    I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
    I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
    Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
    Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
    Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
    I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

    To start with, my computer is the late 2008 model Imac, has 3g of memory …
    I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
    I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
    I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
    Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
    I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
    What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
    No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

  • Video Issues in Adobe Presenter 9

    Video issues - I have inserted a 3 minute video in a Presenter 9  file and it plays fine when previewing but only 6 seconds when published. Plays 6 seconds and then buffers.  I have tried inserting  different formats and still get the same results.  Anyone else have this issue or ideas on how to resolve?

    Hi there,
    I got a solution from the Adobe Captivate technical team.
    As an attempt to resolve your issue
    Uncheck the option “Accelerate 3D graphics” under VM Settings by going to VM >> Settings >> Display>> 3D graphics
    Once done please try capturing and hopefully this must resolve your issue
    I did this and it worked, yeah. However, it is still incredibly frustrating using VMWare, when I am recording using Presenter it keeps freezing and I have to shut the entire system down. Guess I'll try the Partition!!!
    Thanks again

  • IMac G5 video issues.

    I have a iMac G5 20" 2.16 s/n W86494YZVUV that has a serious video issue. What appears to be a set of small lines appears on each side of each icon and the cursor.  Additionally, large random angular spikes appear all over making the display virtually unreadable. Is there an economic solution to this issue or is it a throwaway?

    Hello.
    Once my iMac G5 experienced this blue tint problem.
    The solution was to:
    Open System Preference > Display.
    Click on the highest resolution.
    Close Display pane.
    Close System Preference.
    Hope this helps.

  • Can we record a video from a web cam and let saved video take our previous setting

    Can we record a video from a web cam and let saved video take
    our previous setting
    fps: 20
    bitrate: 1000
    Size: 500*400
    can we configure that in code or is it a webcam specs?

    Hi, Vikas-
    After a brief bit of research, you're definitely hitting upon the limitation of the browsers.  Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
    Thanks,
    -Elaine

  • Saving video messages from viber to Iphone

    Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.
    I would appreciate your suggestions. Thank you!!!

    I have tried it myself, and it actually works. However, it takes a rather long time for it to show up in your gallery.
    It requires a little bit of patience.

  • Saving\updating issue or bug in C5?

    When I update buttons or even text in captions, the changes do not seem to be taking effect after I close the project, so I have to continuously go back and make the changes either on my local mathine or if another developer opens the files from our network. Is anyone else experiencing this problem?
    Thanks.

    Rick,
    Typically we use the network drive to store and pass the projects back and forth. I am checking to see if others are actually editing on the network drive. I am experiencing this on my local HD as well, with changes that I made last week not being reflected when I open the file locally today (no network drive involved). I am wondering if this is a cached project issue.
    Thanks
    Dewey Cooper |
    From: Captiv8r [email protected]
    Sent: Monday, January 03, 2011 12:05 PM
    To: Dewey Cooper
    Subject: Editing Saving\updating issue or bug in C5?
    Hi there
    From what you are asking it would seem that your mode of operation is to make edits to a project while the project is on the network? If so, that's a pretty awful way of operating and is fraught with issues.
    The preferred way of operating is to only edit a Captivate file while it is on your local hard drive. Then if you want it on the network for others to make edits, copy it there. When others need to edit, they copy it locally, edit and copy it back.
    This also requires careful coordination so that simultaneous edits aren't made. Then one person saves back to the network and his/her changes are saved, the person number two saves back and blows their changes away and replaces them with the changes they made.
    In other words, in this situation, whoever saved last wins. So you need to be very careful about coordinating who is making updates and when so that only one person is making and saving changes at any given time.
    Cheers... Rick
    http://www.robowizard.com/pc.gif
    Helpful and Handy Links
    http://www.gooberguides.com/ProductPages/Captivate/Captivate5Foundations.htm
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com

  • Unable to share saved video through whatsapp

    Hi Everyone... How can I share a saved video from my phone album through whatsapp on my lumia phone??

    Hi,
    Whatsapp on Windows phone now supports video sharing from Albums, just update to the latest version 2.11.340:
    http://discussions.nokia.com/t5/Phone-Applications/Whatsapp-on-Windows-phone-now-supports-video-shar... 
    Enjoy

Maybe you are looking for