Saving window position at dual monitor system

Hi!
Is it just me, or is it a bug? I use flash at a dual monitor
system an place the stage on the first and the actionscript window
on the second screen. After restarting flash, both (the stage and
the AS-window) are at the first screen.
Ingo.

I am having issues with it too:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1288032&highlight_key=y&keyword1=dual%20monitor

Similar Messages

Studio CE IDE saving Window positions

For some reason my installation of Sun ONE Studio (on Windows 2000) has stopped saving window positions on exiting.
Every time I start the IDE it is completely empty (no windows open). Before it would save the window positions, open files, etc, so that every time I started it things would be the same as when I exited the application. It's understandably driving me nuts.
Does anyone know how to restore this functionality or if I'm failing to check certain options or preferences....
Thanks,
-T

I managed to 'reset' things by creating and specifying a new user-dir as per:
http://forte.sun.com/ffj/tips/tip02-09-27.html
A few settings had to be migrated over, but all is well again....for now.

System out on Dual Monitor systems

Hi,
I am trying to write an application running on single processor, but dual monitor facility. So differnet monitor must get differnet display from same process.
May I know how can I capture the monitor standard output. I know we have System.out that is set to standard monitor, in this case I "think" it will consider the first monitor has standard output. So, how can I capture actual output stream to each monitor so that I can set the system out property to which ever monitor I wish.
Thanks
HKG...

I don't understand. System.out and System.err write to the standard out and err streams. When running Java in a command window under a GUI environment like Windows, Mac OS or Unix or Linux with X-based graphical displays, these streams will be default be displayed in the shell window that started the program. This window will be on what every display you placed it, the Java program has no control.
If the Java program is a GUI (AWT, Swing or SWT), then System.out and System.err output still goes (by default) to whatever shell window started the program or into the bit bucket if no shell windows as associated with starting the program.

Remembering SaveAs dialog position on dual-monitor

Hello,
I'm using Acrobat 9 Standard with dual monitor setup.
How can I get Acrobat to remember the last position of the SaveAs dialog on the other monitor after moving it there?
I'm using a script to automate the extraction of each page and saving each as an individual file.
Every time a page is extracted, the SaveAs dialog will obstruct my view of the content, which I need to move to another screen, before I can type in the appropriate filename.
Thanks,
Devin

Can somebody please confirm if you're experiencing the same issue on your dual monitor setup? Thanks.

Problem on dual monitor system

Hi;
I have dual monitors and put Eclipse on the right monitor full screen. When I move the mouse over a variable, the pop-up is displayed in the left monitor.
??? - thanks - dave

I've a similar problem. But actually my problem is very common; I've seen a lot of programs showing this.
My monitors are arranged as [2][1]. That means the primary monitor is on the right while the secondary is on the left. But most programs suppose that we have [1][2]. This is a very very bad assumption.
So when the application window is placed on the secondary monitor, ie on the left, popup, tooltips or other things would appear on the right ([1]) !
Nitrox is, unfortunately, one of these applications.

Window Restore on Dual Monitors after Waking

I asked this question in the OSX forum a week or two ago and didn't receive a response. I'm thinking most of the dual monitor uses must have Mac Minis so maybe this is a better place to ask. When my monitors awake from sleeping, it's a crap shoot as to where my app windows will appear. Is there any way to fix this? The monitors are HP LP2475w's. I didn't have this problem with a single monitor.

I have this exact same problem. The only fix is a reboot. Currently I'm experiencing the opposite as well. My macbook still thinks it's hooked up to an external monitor. If I open up the display settings and click Gather Windows I can change settings for the no longer attached Dell 1905FP. It's an intermittent issue. Sometimes I don't have this problem for a week, other times it occurs twice a day.
I'm using the mini DVI to DVI adapter and like the parent, the only fix is a reboot.

Windows & Mac on Dual Monitors with Boot Camp

Can you run a windows program & a mac program at the same time on dual monitors using boot camp?

No. OSx licensing only allows running OSx on Apple hardware.
What program? Boot Camp only partitions the drive for Windows. Boot Camp has no impact or affect on Windows. The only difference between running Windows in a Boot Camp partition or in a VM is that Windows uses the computer's hardware natively in a Boot Camp partition.

Switching window layout on dual monitor

Hi i have color up with dual monitor but i want the scopes and color window switched between monitors. I can just drag each window across and switch them around but there is no resizing option so one window is larger on the smaller monitor when switched from the larger one.
How else can i switch windows around?
Thank You.

Dont worry i figured it out. If you change the Menu Bar in the OS display settings it will switch the scree arrangements of color

Safari window "stuck" on dual monitor

I have dual monitors set up as an extended desktop. Normally I can drag windows from one monitor to the other and back again. Today I dragged a Safari browser window from the right monitor to the left, and it wouldn't drag back again. It will drag offscreen to the right, but it "bumps" against the left hand border when I drag in that direction. I went into the monitor settings and set to "mirror", then back to extended, and that got my window back. But the next time I dragged it, it got stuck again. I've quit Safari, repaired permissions, run Cocktail and restarted. Still stuck. Anybody know what's up with this?
--bill
G4 tower, 10.4.3
G4 tower, Pismo Mac OS X (10.4.3)

This may be your solution (or not), but I see this as well, but usually when the window is near the top of the screen. This is because the Menu takes up space that windows cannot invade and act as a block. Dragging the window slightly down and over gets around this.

Windows 7 and dual monitors

Hello,
Just bought a new iMac for black friday (woohoo). I know I can install windows 7 but my question is, if I use another monitor(iMac being the primary computer) is windows 7 going to work with my dual monitors? Sometimes I work from home and I need 2 monitors under Windows. I will mostly use the remote desktop connection program from Windows.
Thank you

if you install the apple drivers you make with the bootcamp app in osx or download from apples site sure
been using a 24" dell dvi monitor as second monitor for my imac in windows7 and windows 8 and now windows 8.1
work as well as it does in osx

Windows left on dual monitor after disconnect

(I'm sure this is easy so I apologize in advance for being clueless
I have a 15" powerbook AL. When I disconnect my dual display, I often have windows that get stuck on the "other" display. For example, Google Earth seems to think it should display on my (now disconnected) other display. "Detect displays", restarting Google Earth, and rebooting has no effect. I can FN-F9 and see the window but when I click on it, it zooms back off screen.
How do I convince the computer there is no other display attached?
Thanks!

You can open your system preferences, go to display and hit detect displays.
This should take care of it when it realizes that there are no external displays attached)
(This is also where the gather displays button is located)

Snow Leopard does not remember screen position with dual monitor

Hello,
I have an external monitor, which I like to be on top of my Macbook Pro monitor. In the monitor preference pane, I can set the monitor disposition such that my external monitor (main monitor) appears on top of my laptop (secondary monitor). However, every time I unplug the external monitor, I have to do the settings again, because when I plug it back, it shows as "side-by-side" configuration.
How can I make this setting stick ?
Thanks

Try deleting a related plist:
~yourUserName/Library/Preferences/com.apple.systempreferences.plist
Then reset position.

Illustrator color picker position on dual monitor mac

o/
Is there a way to control where the color picker appears in illustrator cs5.5 on mac os lion 10.7.3?
I have a mac pro with a monitor and a cintiq, the monitor is the "active" monitor, it has to be for my use, and the cintiq is the secondary monitor.
I have everything set up now so illustrator "lives" on the cintiq, except for the color picker that insist on popping up in the middle of the normal monitor, and if I move it, next time it does not remember I moved it.
Every other dialog I've come across behaves nicely, and sticks to the cintiq, but the color picker dialog does not.
Hopefully someone out there has an answer, thank you very much for your time!
Kind regards,
dukk

Hi Mike,
Thanks for your reply, however I don't want to swap "main" monitor as that causes all other kinds of issues
I only use the cintiq for illustrator, everything else on the main monitor.
So I'm looking for a way to have those last couple of windows follow every other illustrator dialog, such as save etc to the cintiq.
Kind regards,
dukk

Cannot default Adobe Reader 9 Screen position on Dual Monitor

We have recently upgrade to Adobe Reader 9.0 and I have 2 monitors on my machine. Can any one advise how can we set adobe reader open on a screen 2. instead of the primary screen. At the moment only open on Primary screen 1.
I look through the preference but cannot find any related setting can be applied. It was working fine on Adobe version 8.0
Thanks

A solution for "Video output"
When sending an FCP 5.1.1 HDV sequence to "Motion project", it sends it at 1440 x 1080 and Motion 2.1.1 will open a new project to that size. Once that FCP HDV sequence is opened in Motion 2.1.1 and "Full screen mode" is selected it will play to a full screen in 16 x 9 at 30 fps on the "Main Computer Monitor". In this case the main monitor is a LaCie Electron blue 19". Now if "External video" is selected that being a Sony PVM 1351Q the image will show as a 1440 x 1080 and play at only 5 fps. Furthermore it will create a letterbox on all four sides. (looks like a stretched vertical 4 x 3). Now if a new project is opened in Motion 2.1.1 in HD (1920 x1080) and the same HDV QT file is imported in Motion ; the same procedure repeated, the image will play at a proper size and the 16 x 9 aspect ratio on the secondary NTSC Monitor will be respected, mind you it will still play at only 5 fps.
"SOLUTION"
By canceling the "Video output" on Motion, a full frame 16 x 9 image can be viewed on the "Main Monitor". By the way, that image is astonishing compared to what it was with the previous video card. Now by dragging the "Viewer image" above the timeline to the "Secondary Monitor (Sony)" and selecting the "Full Screen Mode" it will then give a proper full screen image with a 16 x 9 aspect ratio on the Sony PVM 1351Q at 30 fps. The image seen on the NTSC monitors when using FCP 5.1.1 in HDV has also improved to a great degree. It has improved to the point where the Radeon® 9800 Pro Mac® Edition 256MB AGP becomes an interesting solution for HDV editing in Final Cut Studio.
If somene has a better solution, I'm all ears! ... or all read!
Dual 1.8 (original) G5 Mac OS X (10.4.6) Radeon® 9800 Pro Mac® Edition 256MB AGP

Window position in a monitor

Hot on the heels of positioning the stage I would like to
open a NetPage in a window of a specific size in a specific
location. So below is the call for the page but how do I manage its
size and Loc?
goToNetPage "
http://www.adobe.com/"
Thanks
Ron

You can do both of those using Javascript. Here's a page that
describes how to use both:
http://www.codeave.com/JavaScript/code.asp?u_log=7072

Saving window position at dual monitor system

Similar Messages

Maybe you are looking for