Savings Plan with Monthly contribution to be used for employees weekly paid

Hi,
We have a Savings Plan with Monthly contribution. This plan has to be used for employees for weekly paid employees.
How to configure this for weekly paid employees and for which payroll will the contribution gets deducted.
Please help on this issue.
Regards,
Ilyas

Ilyas ,
In SPRO - Personnel management-Benefits-Plans-Savings plans- Define employee contribution rules
In the contribution limits for regular payroll - If your savings plans contribution types is by percentage then give the maximum pre-tax has 100.00 , if it is not by percentage -then give the contribution units to its maximum .
To recheck -go to Pa30 and benefits tab -saving plans and regular contribution tab and check your reference period for contributions.
Let me know if it doesn't work
Shalini

Similar Messages

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

Use the same cleaner as for shoes.

My Airplay icon has disappeared! It was gone maybe two months and then came back for one week. Now it is gone again. How can I correct this?

I really enjoy watching YouTube videos on my big screen TV using Airplay but Airplay just goes away for weeks or months and then comes back for a week or so. All I can think of would be to reload the OS but I can't figure how to do this. I wonder if anyone else has had a similar problem.

Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5)

Does The Ink Of DeskJet Printer Gets Dried If Not Used For A Week?

Hello Guys, I have recently bought a HP DeskJet 1510 All In One Printer. But the Shopkeeper said me that the Ink of the DeskJet printer gets Dried up if not used once for a week or two. Is that true? If yes is there a way to get back my ink?
I have seen some Diagnostic Option in HP Printer Assistant is that the option?
Please help me. Thank You...........

Hi HP990
I'd have to agree with Charles. Powering down at the On/Off switch is always recommended as it will ensure the cartridges get capped properly.
The DJ 1510 uses IPH (integrated printheads). They won't 'dry out' if not used for a week. If you happen to run into any print quality issues you can always run a Cartridge Clean using the automated tool, see the link below for details...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03800862
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

Can I Create A Hotspot With My iPhone 4 To Use For iPod Touch?

I'm considering signing up for the tethering plan with AT&T.
My main purpose would be to create a hotspot for my iPod Touch.
I use my iPod Touch at work using Keynote. I would like the ability to download my Keynotes via Dropbox on my iPod Touch.
Can I create a hotspot with my iPhone 4 so my iPod touch would have access to the internet?

Yes.

After using for a week only appearing apple logo on my iphone 6....

iPhone 6, 16gb I'm not familiar with the O.S sorry, but the unit is functional for a week, now second day only apple logo appearing...I tried to press home @ on/off switch at the same time, still the logo appearing...waiting for the help out there

Hey Ice14344,
Thanks for the question. Oh man! I’m sorry to hear that. Luckily, we have a set of steps that usually resolves issues with devices getting stuck during startup:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
http://support.apple.com/en-us/HT201412
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Thanks,
Matt M.

My I Touch is frozen. I have rebooted it, restored it to factory settings and restored it with backup. Sometimes it works for a week or 2, sometimes not.

My iTouch is frozen. I have rebooted it, restored it with backup and restored it to factory settings. It works for a week or 2 and then freezes again. Now it just will not unlock.

pop the sim card out...
full restore, will wipe out the system & lock code...
resync with your data, and you should be good...

Which EBO should be used for employee absence data.

Hi,
We have the employee absences records in oracle ebiz which should be polled and send to a file.We have to implement this using AIA.Can anyone please tell me which EBO is used for this purpose.
Thanks.

Hi,
I have the same requirement. Can you suggest which EBO did you use finally?
Regards,
Neeraj Sehgal

TS3274 My friend's iPad has not been used for several weeks. When I first turned it on, asked for a four digit pass code. After several wrong "guess" attempts it kept asking for more, with a note saying I cou

It on, it asked for a four digit pass code. After several guess attempts, making me wait for an hour to try each time, I gave up. The next day, it asked me to connect to iTunes. I remain locked up with that request. I've re-booted several times and get same request.
Advice!! Help!

You have to reset the iPad using iTunes if you can not remember your passcode.
http://support.apple.com/kb/ht1414

What is the latetest iPhone I can use for a pre paid phone plan

I want to buy a phone and pre-pay month to month. Everyone says I can't but my X-wife, my daughter and my granddaughter all have that type of service.

That depends on where you are and what carrier you want to use.
In the US, there are no supported GSM carriers that offer pre-paid service for the iPhone. There are a number of CDMA carriers that do, but you must purchase a phone specifically for their network.

What to do with Time Capsule when not using for Wireless Internet

I previously connected my Time Capsule to my fiber optic router but in my no home this is no longer needed as the cable TV company now provides 160 MPS Internet in a router that contains a wireless router built in. It works fine. My computer is now connected wirelessly to that router (too far to take advantage of the wired connection).
Therefore I want my Time Capsule to just be connected to the computer for backups. I gather I have to connect it via Lan and make sure it does not transmit r receuve wirelessly. In fact, other wireless computers in the huse occasionally try to log into the old Time Capsule PPoE settings, so I want to erase them and start fresh.
This seems to be similar to what I want t do, but I want to make sure and ask:
https://discussions.apple.com/message/8256674#8256674
If this is not correct, can someone advise.
By the way, I have a first generation Aiport Express that I hope to use with my new cable router (modem?). I assume it will work as it did with the Time Capsule. Purpose is for Airplay with an audio system.
Thanks!

Thank you for your replies. I really appreciate it.
To answer your questions in order, but first I should mention that due to work reasons, I will be away from my computer until Friday night Japan time, or Friday AM US time.
Anyway, probably better I go slowly,as I tend to get overwhelmed by technical things.
1) You said: "The TC does NOT require an Internet connection for network connectivity. You DO have to connect the TC by Ethernet to the Fiber Optic router in order for it to gain network connectivity AND to allow network clients to access it."
-->Ok, this is in reference to my Time Capsule and the previous network n myold apartment. But your next question makes me wonder:
2) "Is this Motorola device the one that replaced the Fiber Optic router that you mentioned in your original post? What is its model number? Do you have the TC connected directly to it by Ethernet?"
Ok, this is what I have:
Wall--> Cable modem with wireless (Motorola SURFboard SBG6580J Wireless Cable Modem Gateway.)
Other Room IMAC connected wirelessly to Cable Modem (no Ethenet connection to it since there is no jack and too far to run a cable (permanently--I can do for setup if needed)---> connected to TC and Time Capsule is backing up ok. Time Capsule is also not connected to the Modem
3) "Since you will only want to use the Time Capsule for Time Machine backups, I understood that you wanted to disable its wireless network. If this is still the case, the Express would need to be configured to join the wireless network provided by the Motorola wireless router."
Yes, This is what I am wondering. Do I have to connect it by LAN to the Motorola? A few times, when it was just plugged into the Wall, my Mac airport utility found but them could not connect to my Express. maybe because I did not configure it to work with the Motorola as you say.
4)
"By default the Express will broadcast its own wireless network with a network name of something like: Apple Network NNNNNN. You would need to connect to this network with your computer prior to attempting to access it with the AirPort Utility. Another option would be to temporarily connect it, by Ethernet, to the Motorola router during its setup phase. Once completed you can move it to the desired location."
Ok, this confirms what I guessed. Connecting the computer to the Expressby Lan? Is that what you mean?
I do understand the second option---connecting the Express to the Motorola.
If that is right, I can try that. Do I need to do anything other than connect it?
I will be able to try this Friday or Saturday I hope.
Once again. thanks for all your help. Really appreciate your taking the time to explain it.
paul

Why can't we use the ipad with build in internet be used for a hotspot

Will Apple and Verizon make the ipad 2 with build in Internet to have the ability to use it for a hotspot ?

That should work without a problem. Set to dhcp on the networking.
Robert

Would like help with treeset ,the codes that using for sorting, please ?

hi every body. i faced a problem while writing this program, everything worked properly except this one. The program is related to Jframe and it asks the user to add three labels , three text field , one text area and three Jbuttons which are add sort and exit. i could deal with add and exit but sort, i couldn't do it properly because i don't know the codes that should be added in actionperfomed?
These codes are :
package gui;
import javax.swing.SwingUtilities;
import java.awt.BorderLayout;
import javax.swing.JPanel;
import javax.swing.JFrame;
import javax.swing.JLabel;
import java.awt.Rectangle;
import java.util.ArrayList;
import javax.swing.JButton;
import javax.swing.JTextField;
import javax.swing.JTextArea;
import sun.misc.Sort;
import domain.Student;
public class StudentFrame extends JFrame {
      * This method initializes btnAdd
      * @return javax.swing.JButton
     private JButton getBtnAdd() {
          if (btnAdd == null) {
               btnAdd = new JButton();
               btnAdd.setBounds(new Rectangle(13, 135, 59, 27));
               btnAdd.setText("Add");
               btnAdd.addActionListener(new java.awt.event.ActionListener() {
                    public void actionPerformed(java.awt.event.ActionEvent e) {
                    btnAddClicked(); // TODO Auto-generated Event stub actionPerformed()
          return btnAdd;
     protected void btnAddClicked() {
          // TODO Auto-generated method stub
     String name = txtName.getText();
     String id = txtID.getText();
     String age = txtAge.getText();
     Student s = new Student(name , id , age);
     txtArea.setText(String.valueOf(s ));
      * This method initializes btnSort
      * @return javax.swing.JButton
     private JButton getBtnSort() {
          if (btnSort == null) {
               btnSort = new JButton();
               btnSort.setBounds(new Rectangle(95, 136, 62, 25));
               btnSort.setText("Sort");
               btnSort.addActionListener(new java.awt.event.ActionListener() {
                    public void actionPerformed(java.awt.event.ActionEvent e) {
                         btnSortClicked(); // TODO Auto-generated Event stub actionPerformed()
          return btnSort;
     protected void btnSortClicked() {
          // TODO Auto-generated method stub
      * This method initializes btnExit
      * @return javax.swing.JButton
     private JButton getBtnExit() {
          if (btnExit == null) {
               btnExit = new JButton();
               btnExit.setBounds(new Rectangle(173, 134, 61, 23));
               btnExit.setText("Exit");
               btnExit.addActionListener(new java.awt.event.ActionListener() {
                    public void actionPerformed(java.awt.event.ActionEvent e) {
                         System.exit(0); // TODO Auto-generated Event stub actionPerformed()
          return btnExit;
      * This method initializes txtName
      * @return javax.swing.JTextField
     private JTextField getTxtName() {
          if (txtName == null) {
               txtName = new JTextField();
               txtName.setBounds(new Rectangle(79, 11, 60, 23));
          return txtName;
      * This method initializes txtID
      * @return javax.swing.JTextField
     private JTextField getTxtID() {
          if (txtID == null) {
               txtID = new JTextField();
               txtID.setBounds(new Rectangle(73, 55, 65, 26));
          return txtID;
      * This method initializes txtAge
      * @return javax.swing.JTextField
     private JTextField getTxtAge() {
          if (txtAge == null) {
               txtAge = new JTextField();
               txtAge.setBounds(new Rectangle(74, 96, 61, 24));
          return txtAge;
      * This method initializes txtArea
      * @return javax.swing.JTextArea
     private JTextArea getTxtArea() {
          if (txtArea == null) {
               txtArea = new JTextArea();
               txtArea.setBounds(new Rectangle(138, 5, 154, 128));
          return txtArea;
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    StudentFrame thisClass = new StudentFrame();
                    thisClass.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                    thisClass.setVisible(true);
      * This is the default constructor
     public StudentFrame() {
          super();
          initialize();
      * This method initializes this
      * @return void
     private void initialize() {
          this.setSize(300, 200);
          this.setContentPane(getJContentPane());
          this.setTitle("JFrame");
          return jContentPane;
}Edited by: hypocrisy on Apr 26, 2009 6:51 PM

There are three actionPerformed in that program.One for add Jbutton , Sort , and Exit
the codes that i have added for add button after action performed are
String name = txtName.getText();
String id = txtID.getText();
String age = txtAge.getText();
Student s = new Student ( name , id , age);
System.out.println(s);
the codes for Exit button to make it works properly was :
System.out.println(0);
But when i came to Sort Button and i tried to enter many codes but it didn't sort properly so would you like to help me with the right codes :)

Savings Plan with Monthly contribution to be used for employees weekly paid

Similar Messages

Maybe you are looking for