Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. Is there any way to turn this off ?

== Issue
==
I have another kind of problem with Firefox
== Description
==
Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. This is very very very annoying & I see no options in the settings to turn this off. Is there any way to turn this off ? Even if I just press the X button to close Firefox then later in the day I open Firefox the previous pages always open & it is annoying. I apologize for the language but that is just how ''irritated'' & annoyed I am about this
<blockquote>language cleaned up by a moderator - eh</blockquote>
== This happened
==
Every time Firefox opened
== It started randomly
==
== Troubleshooting information
==
There was nothing in the Troubleshooting about this
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Default Plug-in
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.1 r53
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.50106.0
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Hello David.
Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you want (probably to show your home page?). This is the very first option that appears in the options screen, but I understand that it may not be very easy to find. Firefox 4 will not include any redesign to the options screen (except possibly it appearing in a tab, rather than in a popup), but you may interested to know that there are plans to redesign the options screen for versions after Firefox 4, to make it easier to use. If you want to know more about the redesign, just ask.
Anyway, if that doesn't help (it probably does, but just in case), it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

Similar Messages

  • Sometimes when I roll the cursor across a bookmark, my browser jumps to that web page without me clicking on it. Is there any way to turn this function off?

    On occasion I will roll my cursor across a bookmark and my browser will take me to that web page without me clicking on it. I've been unable to detect a pattern; it seems to happen randomly. Can someone explain why this is happening? Am I doing something wrong? Is there a setting I can change to prevent this from happening? And if so, can I be given instructions how to do that?

    this should not be happening, maybe one of your addons is interfering?! - can you try running firefox in safemode or with all extensions disabled for a while and see if this behaviour is still there...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • HT201209 My friend has sent me a code that doesn't work with a US based itunes account (says UK only).  I'd love to hear the music he has bought for me. Is there any way to change this?

    Please help me work out a way to redeem a voucher sent by my friend for some music -- saying it's only in UK based accounts that it's redeemable.

    You cannot redeem codes from one country in another. Must be redeemed in the same country where it was purchased.

  • I have a question when I try to authorize my daughters ipod to itunes on a new computer it pulls up a email addresse I do not know and will not transfer her music is there any way to fix this Thanks in advance

    When trying to authorize my daughtes ipod classic to a new laptop it pops up and asks for apple id but  the email is not one of ours and  it will not let me change it is there any way to fix this problem Thanks in advance

    To whom does the email address belong to? Are you sure it wasn't an email address used in the past or perhaps one that had belonged to a friend of hers?
    Either way, if the music on her iPod was purchased under an account not belonging to her or you, there is much you can do. Sorry.
    B-rock

  • When sharing screen from work with my home computer, is there any way to turn off the display at home?

    Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
    Thanks in advance!
    Matt

    I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
    Matt

  • TS4040 SafariDAVclient is shutting my computer down. Is there any way to turn it off?

    SafariDAVclient is shutting my computer down. Is there any way to turn it off?

    In this thread, Jack Zahran1 has a possible solution: https://discussions.apple.com/thread/3204349?start=0&tstart=0

  • Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACB

    Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..

    I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!

  • HT201635 Is there any way to turn off Safe Sleep?

    http://support.apple.com/kb/HT1757
    Is there any way to turn this off? Very annoying feature

    You could try a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart.  If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

  • LWAP AP1131 Is there any way to turn off the Round BLUE LED

    The 1131 Access point in IOS mode had an option to turn off the BLUE LED circle on the access point. The access point has been converted to LWAP and connected to controller and now the BLUE LED circle is back.... is there any way to turn it off ??
    Can not see an option on the controller.
    Very bright in a dark room (ie hospital beds...)
    Charles

    Hi tdennehy
    Well, first of all thanks a lot for your replay. We have perfect LOS with certainly more than 60% of the Fresnel zone being clear. The Yagi antennas are pointed at each other with no doubt, we actually got while in the "install root" and "install non-root" bridge mode the I and R LEDs on and stable, and S blinking. At times we got all the LEDs blinked fast but I guess we were passing through some strong signal concentrations. Heh, the client sugested to install the Yagi antennas as the omni but I just ingnored him, what else could I say hehe.
    When we were installing all the equipment I had a play with different channels and it seemd like CH 1 worked best. The antennas use the cable they come with because the BR-1310 bridges we have installed right beneath the antennas, only the coaxials cables go down to the office to the power injectors.
    Please see the attached screenshot from the signal and SNR reading. It seems like we have a little bit of noise. The signal was -61dB to -63dB on the installation day but 2 weeks later it went down to about -65dB.
    So, you suggest we rotate both Yagi antennas by 90 degrees correct? I guess one needs to be turned clockwise and another anticlockwise correct? What de we actually gain by doing that? We change the polarization from vertical to horizontal? Could you please explain it to me a little bit more?
    Thanks in advance for sharing your experience. I am going to troubleshoot this on Monday so I would be great if you could give me some sugesstions. I thought of changing the Yagi antennas to 19dB direccional flat pannel of 3rd party but with this distance 13,5dB yagi I think are sufficient. Does the "distance" settings on root bridge have impact on the signal sterngth?
    One more question, at the moment the 2 connected offices are in the same subnet so to speak in the same broadcast domain. On one site (non-root bridge)  they have up to 150 client connections to the servers on the other site (root bridge) but with 20kbps per station making it roughly 3Mbps total bandwidth needed. When they connect all at the same time, our client say the wireless link go. I really don't believe that becasue on the wireless readings we get betwenn 18 and 24Mbps so it should be way more than enough. Do you think by putting both sites in different VLANs would help a little bit so the local traffic would not need to be broadcasted over the wireless link back and forward? Can you shed on that a little bit of your experience? I suspect they have something to do with the switching on local site because when I was pinging the non-root bridge from the local site but connected to a different switch then is connected the Cisco bridge, I got funny reposnses, between 5 and 40ms over ethernet with 10 connections to the remote site over the wireless link but when we pingged the same CIsco bridge from the local site but connecte to the same switch as the Cisco bridge the responses were 1ms. It makes me think that they have some broadcast storming on the local site and that also propagates the wireless link...

  • Is there any way to turn off the "Determining Gapless Playback"

    Every time I open Itunes the "Determining Gapless Playback routines starts. I always let this finish and after a while it appears to stop and I only have the Apple logo at the top of Itunes. However, if I close Itunes and restart it the "deteriminig Gapless Playback" routine starts all over again. Isn't there any way to turn off this annoying new feature....

    You could try a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart.  If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

  • Is there any way to turn off the volume rocker of the side of the iPad?

    Is there any way to turn off the volume rocker of the side of the iPad?
    Please help!!!!!! I forever have the square with the volume control on my screen because my volume rocker does not work.

    You could try a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart.  If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

  • Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

    probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

    Hey there 79usma79!
    I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Is there any way to turn off the auto formatting in Pages?  I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way".  I HATE this!

    Is there any way to turn off the auto formatting in Pages?  I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to.  But NO!  Pages keeps changing the font size!  I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size!  I am getting SO FRUSTRATED!  I've spent over an hour trying to get the stupid program to let me just type my letter!  Can anyone help?

    The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
    You're welcome Rich. Glad to help.
    Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
    Mahalo for the and Aloha from Big Island.

  • I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?

    I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?

    The light cannot be turned off, but if you stop by at the office supply store and get a sheet of small 1/2" white routnd labels, you can place a few over the light to dim it significantly. Add more labels as needed to adjust for the brightness level you want to achieve.
    Of course, you could use a piece of tape, but the white labels look much nicer and won't be noticeable once you get 4-5 feet away from the device.

  • Is there any way to turn off keypad sounds when making a phone call?

    I am a new user to iphone....is there any way to turn off sounds of keypad when making a manual phone call of someone not in address book?
    Thanks

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

Maybe you are looking for