Saying no tv signal when want to record certain ch...

my signal on tv is perfect but keeps saying cannot record this channel because of tv signal. has anyone else had this problem?i only had this box since monday and it allowed me to record from any channel that day and the next

I regularly have his problem and it frequently causes recordings to fail.
I commonly see that youview box reception is poor yet the same ariel lead when plugged directly into the TV gives perfect signal.
Sorry not much help but a problem shared!

Similar Messages

  • 40L6353D ... "No signal" when trying to record to usb

    Hi, please help..
    Having a fee problems with this tv and this is the latest..
    I have an 40L6353D and today i bought a usb stick so i can record some programmes, however after ive set it up and try to record or even pause is alerts NO SIGNAL...
    Could anybody explain this or how i can deal with it please, many thanks

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    - Peter

  • Want to record what I'm hearing on Aux 4 when soloed

    Hi, I've an effect on bus 4, that I want to record to an audio track...
    I want to record what I'm hearing exactly/only when I solo bus 4
    this bus has a flange effect 100% wet and is a really exaggerated flange effect...and loud too
    Currently, I can only figure to put input of audiotrack as bus 4 but this for some stupid reason is not working....
    all thats getting is what I'm SENDING to bus 4, a basic Closed Hat.
    Now I've been talking to a guy who seems to say my problem must be my send control is to little BUT
    even when I turn this full, the signal picked up/recorded to the audio track with bus 4 as input is STILL
    just the originasl hat sound- no flange.
    A solution to this would save me going mad here today!
    p.s can't bounce unfortunetly because I dont want to dither twice at 24 bits, which also the finished track will be later
    ..which is a totall different topic I don't wasnt to get into
    thanks

    What you want to record is not bus 4, but the Aux channel that is receiving the signal from bus 4.  Set the output of the Aux to a different bus, then use that as the input to the audio track.

  • Why does my Vizio hdtv say no signal when I connect my minidisplay port to hdmi cord between my macbook pro and tv?

    My Vizio hdtv says "No Signal" when I use my mini displayport to hdmi cord. It worked flawlessly for a month but randomly decided to no longer work.
    I am using a macbook pro from early 2011 running os x Lion 10.7.5 and a thunderbolt to hdmi cord. The cord has worked without a hitch the numerous times I've used it until recently. Now plugging it in will cause the macbook to flash blue quicker than normal and immediately go back to the normal screen. I know the macbook recognizes the TV because changing the input on the TV to the hdmi connected to the computer will cause the macbook to flash blue again, with the same result. The TV remains unresponsive. I have tried all combinations of turning on and off the TV and macbook with the cord plugged in and unpugged from either and both systems and in both hdmi inputs on the TV. I've changed the display resolution to every possible option with no result. The TV is not recognized as a display on either the Display section of System Preferences or the Sound section.
    It confounds me that the cord should work flawlessly until now, a month after buying it, for no apparent reason. I've been gentle with the cord, so the problem being a result of damage is unlikely. I had not updated my computer in any way between the successful and unsuccessful uses of the cord, but I have since updated my computer and the problem remains.
    I have searched for this problem on the Internet and have seen others with similar problems, but I have not found a solution that resolves my problem. I hope to avoid having to make any additional purchases.
    And a thousand and one thanks to any and all who help.

    Do you have gfxCardStatus installed?  Is your monitor set to "Integrated" or "Discrete".  You want it set to Discrete to drive the external HDMI display.
    Try resetting the PRAM and SMC
    <About NVRAM and PRAM>
    <Intel-based Macs: Resetting the System Management Controller (SMC)>
    Are you sure you have a good miniDisplayPort to HDMI cable?
    Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
    Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

  • I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

    I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

    This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
    On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

  • My lg tv says no signal when I connect to my macbook pro on the rgb/vga

    my lg tv says no signal when I connect to my macbook pro on the rgb/vga port. I have tried my windows pc as well, different cables, changed screen resolution but no joy. Help please.

    Possibly because you haven't told the TV which input port to find your MBP on?

  • Keeps saying a problem occured when I want to convert my PDF to DOC

    Keeps saying a problem occured when I want to convert my PDF to DOC

    Good day,
    Sorry to hear about the trouble you're having. Could you send us a copy of the file which isn't converting correctly via our File Conversion Issue Form? In the form, please include a link to this forum post. We'll try to take a look at it for you and hopefully we can figure out what's going on.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Why does Safari say "Blocked Plug-in" when I want a video?

    Why does Safari say "Blocked Plug-in" when I want a video?

    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.

  • TV Screen says "No signal" when I try to use apple TV.  Was working.  ie Little Apple symbol would appear on TV screen, but now  get "No signal"  Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal"

    TV Screen says "No signal" when I try to use apple TV.  Was working.  ie Little Apple symbol would appear on TV screen, but now  get "No signal"  Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal" HELP please

    Same exact problem with my Apple TV.  Worked like a charm the first two times we used it.  Haven't used it in about a month, now no Apple logo when I turn it on, or the logo appears momentarily and distorted, and then an error message from my Samsung HD TV:  Mode Not Supported.
    What changed?
    Bill O'Rourke
    ***@***********.com
    <Email Edited by Host>

  • I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions? Thanks

    I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
    Thanks

    email ituens at expresslane.apple.com and they will help you for nothing

  • When i remove power adaptop it says ''are you sure you want to shut down your computer now?'' what should i do????

    when i remove power adaptop it says ''are you sure you want to shut down your computer now?'' what should i do????

    It sounds like you need a new battery. Does it show any charge left when you unplug AC?
    If it does, try this:
    http://support.apple.com/kb/ht3964

  • I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

    i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Severe static when trying to record electric guitar

    I've been trying to record a clean electric guitar and every recording is just covered in heavy hissing static sound. This didn't happen when I recorded an acoustic guitar through a microphone. I have an electric guitar going into a small amp, with the amp level set on the clean channel at a very low setting, then the headphone/output is running directly into my M-Audio FastTrack USB interface, which is connected to the computer. I have adjusted the "recording level" in garage band so that the signal never gets close to the red in the individual instrument track. The "output" knob on the FastTrack is set relatively low also, about "4" out of 10. When I play back the recorded track, the master level meter never goes into the red either. Yet no matter what volume I record at I'm getting this strong crackling/hissing as if it was extremely overdriven.
    Related question: When I play on the electric guitar, is it supposed to show an indication in the LCD box, as it does when I'm playing on my midi controller? It doesn't have the little indicator light showing signal, nor does the master level indicator, when I'm recording. Only the individual track level indicator shows the signal coming in. Maybe this is normal...
    Any help is greatly appreciated.

    OK, well I solved my own problem through trial and error. Rant: I switched to GB from ProTools on the theory that GB was supposed to "just work" and I want to be a musician, not an audio engineer. Here is how I fixed the static: one of my garage band books told me I could set the Garage Band audio preferences to "System" default, and then set my computer's audio preferences to my audio interface for the ins and outs, because I wanted to play all of computer's audio, whether in garageband or not, through my reference studio monitors. Well doing it this way results in massive static when recording a real instrument, for no apparent reason. So to fix this, you have to set Garageband's own audio in/out settings to your audio interface, NOT to the system settings. This caused the static in my recordings to completely disappear. Go figure.

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Want to record ext. synth/voice as tracks in GarageBand 3/Controller Q's?

    I want to record sound from my microKORG into GarageBand 3. I purchased a cable with the right connectors (which unfortunately I can't even find now, but when I do) to go from the output of the microKORG to the input on the mac Mini, but I was never able to hear any sound when recording it.
    I AM able to use the microKORG synth as a controller for GB 3 using an M-Audio Uno USB cord, but have a MIDI keyboard with larger/more piano keys (though the first key is broken) I plan to use for playing instruments in GB instead if not playing sound into a track from the microKorg.
    Also since I can't find the connection cables yet- or even if I do- should I use my Griffin iMic with cables coming out of the microKORG into the RCA cables in the Griffin iMic, hooked up via USB (does the iMic even have a preamp in it? Basically, will it sound better anyway to use the iMic until I purchase an input device/GB controller like Apogee's Duet? And, if I get a mic, can I use it for recording vocals?) Should I get an old iControl (I heard it had a MIDI input, which I can use for my microKORG since I only have 1 free USB input on my Mac Mini, as I have a USB ext, HD- by the way, can I save all my GB audio files- or even the whole GB application- onto my ext. HD, I've learned you can move your iTunes Library to one? Just how useful WAS the iControl, and will it work with the new GB 5 in iLife '09?) or just wait till I can get the Apogee Duet (I hear it's a superior Firewire controller with great sound and built-in presets for GB and Logic, though it's $500) but I'm a bit confused as to how the Apogee can supposedly control GB so well with just 1 knob that I guess is turnable and clickable?
    Finally, as a choice for a new keyboard controller, I know you can't control many functions in GB via a MIDI controller, but since I could possibly also use it to control the microKORG's sounds and play normal-sized piano keys, as well as maybe using it with other software, would you recommend I get the M-Audio Oxygen 61-key controller with lots of MIDI assignable buttons (or move up to the even more MIDI programmable Axiom 61 key, which I can get for $230), or just go down to the Keystation 61 ES, with semi-weighted keys (I can get both the Oxygen and the Keystation at around $140 at jr.com). Or if I want to give up some MIDI control for a full keyboard (though I may NOT want to, since I plan to learn other programs like Live and Reason, which I suppose could benefit from the Oxygen's extensive MIDI control- can anyone confirm this?), if I AM willing to give up as many controller functions for the use of a full-sized keyboard, should I go with the Keystation 88 ES, which may be my best bet, as I found one used at $129, if I use the iControl and/or Apogee Duet eventually for a controller, I just don't know how well it can control my microKORG- would I still have to use it for programming/instrument changes and the keystattion 88 es just for playing the instruments? I know I have a ton of questions here, and would appreciate any help anyone can offer- what I need to do first is see if I can use the iMic to record my microKORG into GB 3, and continue using it even after I find my cables that go directly into the computer from it?

    No, the iMic has Left and Right stereo RCA inputs, that's the whole point, ...
    Then you must have a very special model - all the ones I know have 1/8" inputs:
    But anyway - it doesn't make a lot of sense to pick your hardware equipment according to the cables you have. An adaptor from RCA to mini-jack or vice versa costs a single digit dollar amount. Why don't you just get your gear connected and then come back with precise questions? It's not a very good idea to poor out all the questions you ever had about recording in one post and expect concise answers.

Maybe you are looking for