Says Credit Card is already in passbook but does not show as being in passbook

My phone had to go through a restore.  After i restored it using a backup I noticed that my credit card that was previously in my passbook for apple pay etc. was no longer there.  When I tried to manually insert the data for the card, it would not let me saying the card is already in passbook (which it is not).   I used to get alerts when the card was used and now I do not and I can't use the card for apple pay since it is not in passbook.  It was my only passbook credit card.  Thanks for helping.

Wondering if the Card you were using is the same Card you use for iTunes?  If yes, you may want to remove it from iTunes and then add it back.  After that see if you can add it to iTunes.  Another possibility is that your Bank can remove the Card from Apple Pay and then you can add the card back and re validate with your Bank.

Similar Messages

  • When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone' The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?

    When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'.  This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?  It doesn't sync either.

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • HT3702 I want to know why charges on my credit card were made when my account does not have valid expiry or CCV details?

    I want to know how can Apple charge a credit card number on my appleid which does not hold valid expiry date or CCV details?? surely this does not meet all the security measures

    iTunes Store: What to do if your account has been compromised

  • TS4062 I can't sync music on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. Suggestions?

    I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device.  I've already spent way too much time trying to figure this out and it's driving me crazy!  Thanks for any help you can offer.

    This is correct.  It will not show in finder.  It is not an external storage device.
    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Open itunes connect ipod, do not sync, click File>Transfer Purchases

  • Domaindnszones Forestdnszones exists but does not show in Dns

    Guys I have a weird situation where the Domaindnszones and Forestdnszones partitions exists but does not show in dns.
    If I try to recreated the partition in DNS it says "partition already exists".
    I try Recreating it in DNS by creating a new domain under the "mydomain" zone but it never gets populated.
    Replication seems to be working fine between my DC's
    This domain was created from way back in the NT days and has just been upgraded over the years..
    currently we have 1 2003 Dc and 2 2008 r2 Dc. we want to retire the 2003 dc. all 3 dc are DNS, and GC servers.
    at this point should i even worry about this two partitions. ( Domaindnszones, Forestdnszones).
    I think Dns was never configure correctly when we went from 2000 to 2003
    thanks

    HI.
    Correction. the 2003 dns and dc is no loger in the environment. It was the Primary FSMO role holder.looks like all the roles has been transfer over to the new 2008 r2 dc. 
    I did not set this domain up. but are trying to clean it up.
    I notice in dns there was only one AD integrated zone (mydomain). that the (Domaindnszones and forestdnszones) are not visible. I tested replication between the DC via sites and services and replication is ok.
    I created and AD integrated Zone in DNS called _msdcs.mydomain and it looks like it populated it with all the corrected corresponginng zones.
      _mcdcs.mydomain
    ----------dc
    ----------domain
    -----------gc
    -----------pdc
    when i try in dns to Create default application directory partition, it tells me the "partition exists"
    using adsiedit connecting to DC=domaindnszones. dc=mydomain I can see the partition same is true for Dc=forstdnszones, dc=mydomain
    so digging around i found this similiar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b5551ad5-65ec-48f7-81b2-2a00bbd93def/msdcs-doesnt-exist?forum=winserverNIS&prof=required
    I followed solution suggested by ACE. which did allow me to delete and create the new (domaindnszones and forestdnszones) partitions. but sitll not showing in dns.
    some more research showed this link..
    http://blogs.technet.com/b/the_9z_by_chris_davis/archive/2011/12/20/forestdnszones-or-domaindnszones-fsmo-says-the-role-owner-attribute-could-not-be-read.aspx
    and indeed the script did clean up the deleted 2003 Dc/dns server. and assigned the new 2008 r2 dc/dns server
    still the Domaindnszones and Forestdnszones are not visible.
    Manually Creating a delegation under Mydomain (domaindnszones forestdnszones) only yield Grayed out folders
    Manually Creating 2 domains under Mydomain (domaindnszones forestdnszones) shows the folders. but once I restart netlogon and restart dns
    the folders disappear...
    any suggestion solutions will be greatly appreciated...

  • USB Drives works, but does not show up in "Safely Remove Hardware"

    USB Drives works, but does not show up in "Safely Remove Hardware"
    windows 8 
    USB Drives works, but does not show up in "Safely Remove Hardware"
    Here are my symptom
    - USB Flash Drives , USB External HDD works normally
    - I can see them in "My Computer"
    - I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
    - They show up as "Disk drives" in device manager
    - When I right click their icons in "My Computer", there is no option to "Eject" them
    - In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
    After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
    I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
    Thank you

    Hello Mickey2003
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

    hi
    USB Drives works, but does not show up in "Safely Remove Hardware"
    Here are my symptom
    - USB Flash Drives , USB External HDD works normally
    - I can see them in "My Computer"
    - I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
    - They show up as "Disk drives" in device manager
    - When I right click their icons in "My Computer", there is no option to "Eject" them
    - In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
    After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
    I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
    Thank you

    Hello takpesar,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My iphone 4S shows up on my computer but does not show up in itunes devices. I have all security

    I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
    I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
    I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
    Any help is greatly appreciated.

    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Thanks!  For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine.  It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do.  The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
    So, thanks anyway!  Pretty cat!
    Mona

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are there OK. Any suggestions?

    I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?

    It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.

  • HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

    I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.  Any Suggestions?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

  • My ipod shows up in itunes, but does not show up on my pc as a drive

    my ipod show up in itunes - but does not show up on my pc as a drive
    cannot figure out why it now doesn't show up

    Maybe
    iOS: Unable to import photos to computer
    Did it show before?
    If you connect to another PC does the iPod show up in My Computer?
    Have you installed only camera or scanner programs on your computer?

  • I am trying to uninstall a program that is running in the background but does not show when I force quit.  How do I remove it?

    How do I uninstall a program that is running in the background but does not show in Force Quit?

    Open Activity Monitor and look for the program.  Select it and Quit or Force quit it from within Acitiviy Monitor.
    Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages.  You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
    OT

Maybe you are looking for

  • MAC BOOK AIR Unusual Data Consumption by Mountain Lion OS

    Hi, I am using MAC Book Air and my OS is upgarded to Mountain Lion. After upgradation I am facing a problem of data consumption by my MAC all the time from my wifi modem, even without opening any brpwser or Mail. Kindly provide solution for this prob

  • Between Operator in physical join

    Hello, Can we use between operator in physical join. We did that, its successfully checking in, but when we re-open the join, its show in RED color. So, got doubt, can we use between? and we have another error "No fact table exists at the requested l

  • Indesign framed edges

    Is anyone experiencing framed edges around text and vector art work after creating a PDF of the Indesign work? It only show up on the PDF and not on the Indesign file. Im running CS3, MAC 10.4.11 Thanks, -Z

  • What is this crash log and how do I fix it?

    Here it is: ## Crash log <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict>      <key>AutoSubmitted</key>      <true/>      <key>S

  • Personalizing the PERWSHRG form by making the supervisor field mandatory

    Hello I need to make the Supervisor field on the Assignment screen of the PERWSHRG form mandatory. There are many employees in our oracle system without a supervisor. I need to force the user to capture a supervisor whenever an employee is queried wi