Says its a blank dvd and it is not!
my friend has a pc and burned a dvd for me with jpgs and raw photo files. when i put the dvd in my imac it says that it is blank and won't read anything on it. i put it into my husband's pc laptop to check the dvd and the images come right up. why won't my imac recognize the contents of the dvd and how can i get it to? PLEASE help! the files are too big for me to email and there are a lot so i need to be able to just pull them up on my imac!
thanks in advance! i would really appreciate any help!!!!!
Has this iPad every been jailbroken?
Similar Messages
-
Blank DVD and CD not showing up in Finder or anywhere
My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.
AppleHoop wrote:
When I open the Disk Utility I see SuperDrive but I can't burn nor eject the disk. The only way I can eject the DVD is to restart my computer.
Do other blank discs appear normally?
Do other commercially manufactured discs (software, movies) show up normally?
Those questions are to help narrow down exactly what the problem is.
AppleHoop wrote:
I have no idea what it means to "zap the PRAM" and Reset the SMC"
Honestly i don't think those are going to make much difference for this problem. Go ahead and do them, but they're usually last resort desparation solutions, not first resort. -
I purchased the new gen 7 ipod nano and needed to update itunes to 10.7 but my current software says its up to date and won't download 10.6.8 Currently I have 10.5.8 Why won't this update?
The first generation Intel-based Mac's were released in January 2006.
Snow Leopard requires an Intel processor:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
If you go to the Apple menu & "About this Mac" this will tell you what type of processor you have: -
hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).
Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
i cant connect to my wifi due to the fact that it says its a wrong password and ive tried resetting all the ways i can and it still says i have the wrong password what can i do
Do other devices connect to the same wifi router?
Have you tried powering off and then back on the router?
Did you connect before OK?
Have you reset the iPod?
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Reset network settings: Settings>General>Reset>Reset Network Setting
-The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???
ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you
-
I want to by gems in an app called clash of clans "consumable app-in-app purchase" but it keeps saying its cannot be conepleted and that i have to contact you .. What should i do
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have a redeem code for an app but it says its a USA code, and I live in the UK, is there anything I can do?
iTunes gift cards can only be used in the country in which they are issued - so US gift cards can only be used with US-based iTunes accounts. Do you know anybody in the US that you could sell/give the card to ? Or you could just sell the card.
-
Matshita DVD-R UJ-875: I cannot get it to accept blank DVD and CDs.
I have the super-drive Matshita DVD-R UJ-875. I have tried 5 different brands of DVDs they all get spit out. (My Macbook accepts them.) My iMac has some trouble reading a few DVD movie discs, but I eventually get it to go. CDs seem to have no trouble. Just blank DVDs and CDs get spit out. I get one success every about 50 discs to stay in and can burn. I have had the problem when running in Leopard, but not so much so, now I have the problem much more profound after updating to Snow Leopard in September. I switched from PC to Mac because my wife really enjoys video and photo editing on it. She feels very let down that she cannot burn any of her work. I really want to get this fixed. Anyone have any advice? I do have the 3 year warranty, but want to avoid taking it in if possible.
Having the same problem with my MATSHITA DVD-R UJ-875 drive on my Intel 24" imac. It still reads commercial CD and DVD discs, but for some reason spits out 75% of the CD-R discs I put in and now refuses to burn anything onto any blank CD I put into Itunes (on the few it WILL read to begin with). I suppose I will take it to the local authorized Apple repair shop and wait a few days to get it back. This will be the third time I have had it in since purchasing it in 2008. Once to have the defective hard drive replaced, again to have a defective hard drive fan replaced and now this. On one hand I am very glad I bought that $129 AppleCare, but on the other, I am tired of dragging this huge thing around and being without it for so long.
-
Anyone know how to reset my iphone vm password (so I can listen to my messages) while in Canada and not turning on cellular so I don't get charged for roaming? Verizon says its an iphone issue and Apple says to contact my carrier?! I don't want to pay for roaming and I am able to use my phone fine and also connect to wifi while at friend's houses etc.
It's not a Verizon reset - under General and phone there is a place to reset my password however I can't do it without cellular turned on.
-
MY IPHONE 4S WONT SWITCH ON THE APPLE SIGN JUST KEEPS FLASHING ITS 4 MONTHS OLD AND HASNT BEEN DAMAGED HAD ABOUT A QUARTER OF CHARGE AND JUST WENT OFF TRIED RESETING BY HOLDING HOME AND LOCK KEY, NO LOOK, TRIED DOING IT THROUGH ITUNES, IT SAYS ITS IN RECOVERY MODE AND WILL ERASE ALL DATA AND RESET, THEN SAYS IT CANT BE BECAUSE OF AN UNKNOWN ERROR CODE3194, PLEASE HELP!
Stop using caps then I'll read your post.
-
I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?
iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space". -
My iPad is locked and it says to connect to iTunes, and iTunes will not let me connect.
My iPad is locked and it says to connect to iTunes, and iTunes will not let ,me connect.
Try this:
1. Go to Settings>General>Date and Time>Set Automatically>Off
2. Set the date ahead by a few months
3. You should then be able to connect to the store
Maybe you are looking for
-
How to display 3 alv with top-of-page using splitter container
Hi, I want to display 3 different alv in a single container corresponding to the 3 check boxes on selection screen. i.e. If user selects 1 check box only one alv should be displayed, if 2 checkboxes selected by user 2 alv should be displayed and same
-
I can´t synchronize more than one catalog in lightroom mobile
I am a professional photographer, shooting 100,000 pictures a year and I usually create many catalogs. I can not understand how Lightroom mobile does not allow me to sync multiple catalogs at the same time. Just leave me one and if I sync new one , i
-
Installing OD Master impossible
Lion 10.7.2 Trying to install OD master there is the failure "lion server the hostname does not resolve to any configured address" - impossible to establish. changeip -checkhostname is ok, everything with "success". In another thread I found this: /v
-
Creating Proxy service over a secured BPEL process
Hi, I have a BPEL process project A which I have secured using oracle/wss_username_token_service_policy Now, I want to expose it over OSB as a proxy service. After registering the WSDL, I tried to create Business Service over it. It gave me a warning
-
BAPI_SLSTRANSACT_CREATEMULTI + Organization
Hi, I need help to problem with BAPI_SLSTRANSACT_CREATEMULTI bapi. Situation: SAP CRM 5 SP 8 I fill all the relevant fields and the document is created. But exist a role for organization determination and it don't works when bapi process. I fill the