Says my system has not been modified to complete installation?
the wizard was interupted before cisco jabber video for TelePresence could be completly installed. Your system has not been modified. To complete installation at another time, please run setup again,
I have tried multiple times and will not complete.
Hi Travis,
What are your system specs? Do you meet the minimum?
Jabber Video system requirements
Windows
Windows 7, Vista, or XP (SP 2 or newer), with:
• OpenGL 1.2 or newer
• For 720p HD calls, Intel Core2Duo @ 1.2 GHz or better
• For VGA calls, Intel Atom @ 1.6 GHz or better
Webcam (built-in or external; you'll need an HD webcam for the other side to see you in HD)
Broadband Internet connection with a recommended bandwidth of 768 kbps upstream and downstream. A 720p HD call will require approximately 1.2 Mbps upstream and downstream.
Mac
Apple Intel x86 processor computer, running OS X 10.6 (Snow Leopard) or newer, with:
• For 720p HD calls, Intel Core2Duo @ 1.2 GHz or better
• For optimal performance, we recommend Intel Core2Duo @ 2 GHz, with 2MB L2 cache per core
Webcam (built-in or external; you'll need an HD webcam for the other side to see you in HD)
Broadband Internet connection with a recommended bandwidth of 768 kbps upstream and downstream. A 720p HD call will require approximately 1.2 Mbps upstream and downstream.
Similar Messages
-
Can someone please help me? How do I modify my system so I can upgrade to iTunes 11?
The installation stops before iTunes could be configured.
It tells me to run the installer again but I get the same message that my system has not been modified.
I am using Windows 8 64bit on a laptop.This may help:
http://support.apple.com/kb/ts2446 -
Unable to download iTunes "system has not been modified"
I'm unable to download the new iTunes! I have a Windows 8 HP Envy m6 & it's less than a year old. I have never had a problem with iTunes until now :/ When the download starts it only lasts a few second then I get an error message saying my system has not been modified and to try again later. Any help at all would be greatly appreciated.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work
See:
Trouble installing iTunes or QuickTime for Windows -
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.
I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.
-
Your system has not been modified err message
I just purchased an HP 15 notebook and I am trying to install a Nikon ViewNX2 photo editor app; however, I keep getting "Your system has not been modified. To install this program at a later time, run Setup Wizard again. Click the Finish button to exit the Setup Wizard", am I missing a patch? If I do, can you please send me the link?
Hi @avlimuaco ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your installing the Nikon ViewNX2 photo editor app. This app is not compatible for Windows 8 according to their specs.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
TS3212 your system has not been modified
what does your system has not been modified mean
Exactly what it says.
Whatever you were attempting to do did not happen. -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified.I
I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone. Anyone facing the same issue or can point me in the right direction?You may get better information on that error message by reposting in the iPhone forums:
iPhone
It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than just "G4" will get you help faster. -
While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
How do I modify the system.Hi Rgardezi,
The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
2) Perform a selective Start up using the steps mentioned in this link.
Please suggest if the above mentioned steps were able to resolve the query for you or not.
Cheers,
Kartikay Sharma -
"Your system has not been modified" iTunes download error.
Hello, this is my first time asking for support so I hope I provide all the information needed.
Background:
A while back my elder sister went into my computer and messed some settings up because iTunes was being wonky and not updating her new iPhone properly (turns out later the iPhone itself was having issues - not my computer nor iTunes). I used an older version of iTunes because I had an older iTouch and didn't need the newest version, but I didn't have any complaints when she updated it. I come back one day and iTunes isn't working alltogether, and when I plug in my iTouch it tells me there's an error and I need to re-install iTunes (or somewhere along that line, I was stupid and didn't screencap the message). (I asked her what she had done and said "Updated your computer! It hadn't been updated in so long, and then iTunes stopped working! Beats me!" and she can't tell me exactly WHAT she changed and downloaded.) So, I went through the uninstall process and went to the Apple website to download it again, but it kept giving me a "Your system has not been modified" error. This was a long time ago but I came back to my computer to try and solve it again and I've tried to redownload it off the website multiple times but it gives me the same error.
I went into my control panel and "add/remove progreams" to see if anything was left over from the uninstall process but I can't find any iTunes files. Any idea on how to get iTunes back onto my computer?
TL;DR:
"iTunes Installer Completed
The installer encountered errors before iTunes could be configured.
Errors occured during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."I had the same problem.I tried every solutions on the net but nothing worked.Luckily on that very day my free avast antivirus date expired(I dont currently have a paid antivirus) and I uninstalled it.Then I tried to install itunes and did it on the first go.But I am using a windows 7 32 bit so it might not work for you as you are on the 64 bit.Actually the antivrus was the culprit.Hope it helps.Thanks
-
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
My iTunes installer was interrupted & now it's telling me "Your system has not been modified. To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.
I'm not sure anyone here knows more about the Java plugin than you do...
Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs"). -
I am unable to download itunes due to an error message that popped up after installing (or so I thought) was completed. It said it could not complete the process because "system has not been modified". What?
OK, can anyone explain how am I supposed to deal with this reply from apple? (I used a report a problem of a song purchase to ask why I can no longer access USA content)
Quote
Dear Darren,
Greetings from iTunes Store Support. My name is Subramani and I am happy to assist you today.
I understand that you are unable to make the purchases from your iTunes store account. I know how important this is for you and I am glad to provide you with the necessary information.
Darren, you are not authorized to obtain content from the United States iTunes Store. We are unable to provide further information regarding this situation. I apologize for any inconvenience this has caused.
For more information on Apple's requirements for using the iTunes Store, please refer to the iTunes Store Terms and Conditions:
http://www.apple.com/legal/itunes/us/terms.html
Thank you for being a valued iTunes Store customer. Have a nice day!
Unquote
Nice day? W-T-F?? They cannot tell me why I can't access USA content with my USA based account?
Anyone?
Thanks
Darren
Maybe you are looking for
-
Place single quote around string
Hi, I am wondering how I can Place single quote around string in the following. I have tried double and triple quote but it doesn't take variable name from rec.tablename. any idea rec.table_name ==> 'rec.table_name' rec.column_name ==> 'rec.column_na
-
Capture card necessary or recommended?
I've read conflicting advice about capture cards and HDV. One reviewer said he imported HDV footage into FCP 5 using Firwire from camera to Mac, and it was as easy to capture and edit as DV footage. Others say that it's much better to go through a ca
-
Failed over to a Aysnc Replica and now previous primary replica(Now Secondary) is in NOT SYNC state
Hello All, Here is my situation : 3 Nodes in an AG configuration, and its a multi-site cluster. Sync commit between 2 nodes in one DC and Async commit to a node in the DR DC. AG is failed over to the Async Replica which is the DR site and all the da
-
Why am I getting this error page?
Hi All, On my application I have a form that I use to add new Users of the system. On the Users table User Id is the primary key & it's the first item on the form. Also, on this form I have a password field (among other fields) which is read only & i
-
URGENT!!!!! JDev is not showing my project (when I opened it this morning)
Hello All, I am using JDev 10.1.3.4 for the last 3 months and all was well. I worked in it yesterday night and everything was working as expected. I saved my work before logging off and when I opened it this morning, I don't see my application/projec