Says PM where signal bars should be?
On the main screen at the top it has PM (where the signal bars should be), the battery percentage (where the time should be) and nothing to the right... When I open safari, everything is back to normal at the top. When I go back to main screen it's there again...
I restarted my iPhone and its not there anymore.. What happened?? (So I know if it happens again)
Just a one time glitch, most likely. Glad you got everthing working again.
Similar Messages
-
FIve dots where volume bar should be
My nano seems to be working fine but instead of the time bar / volume bar that is supposed to be at the bottom of the screen while a song is playing, i see five dots. how do i change this? is it a tech issue or just a setting that i cant seem to find? thanks
PC Windows XPIs it "stuck" on that screen?
If so, this is a known bug with some iPods.
http://docs.info.apple.com/article.html?artnum=303130
You may need to update your firmware to the latest version to avoid this happening again. -
I just updated my mbp with the icloud update and now my wifi signal bars in my menu bar stopped working and say that there is no airport card installed. I am connected to the internet through wifi just fine and the system preferences says that I am connected, just weird that the menu bar signal stopped working. if there is no fix, is ther an alternate wifi signal bar that i can put up there?
Thanks for the help.anyone?
-
There is a check in the navigation box but there is still no address bar. The only thing that is where the address bar should be is speed dial icon. Above that is file, edit, history, etc, Below the speed dial icon there is most visited, getting started, latest headlines. below that are the tabs
Could you attach a screen shot of the "speed dial?"
'''Safe Mode'''
You May need to reset toolbars and controls via [[Safe Mode]]
Make sure you completely close Firefox first. When you get to the Safe Mode window, select Reset toolbars and controls and then Make Changes and Restart.
Hope this helps! -
My iPhone says "o death" where the date should be on the lock screen, why is it doing this and how do I get the date back?
I tried powering off and on and it went away, but I can't tell if it's been broken into since everything works fine (I'm using it now) is there a test to see if it's been broken into?
Thanks for all your replies! -
I updated to Yosemite and now I can't open my YNAB finance app. There is a question mark in the Dock where the App should be and when I hover over the question mark it does say YNAB but I can't open it. When I double click on the question mark nothing happens. Has the link to YNAB been broken with the update? Has this happened to anyone else?
Check the Application folder.
If it is not there, contact YNAB Finance for a OS X Yosemite compatible version of the application.
Best. -
Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple RoutersTwo ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john -
When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.Thanks so much for your reply fanboy20.
Yes, just made sure of that. I do have the latest version of Flash player. But I have just staggered upon the answer. Chalk it up to being a newbi. I was not putting my apple tv to sleep and it would not allow me to see
you tube on my computer while it was still operating on my TV. When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine. Thanks again for your response. -
Change Visible Signal Bar Text???
Can the text in the "visible signal" bar be changed? We'd like it to say "My Company IT Support" or some such. I see where the permissions dialog text can be changed, but I can't find any documentation on the "visible signal." Our teachers and staff freak out when the "ZENworks Remote Management" bar pops up. Sometimes they turn the system off. No, I can't get anyone train or explain to them what this means, and some people simply forget. It would really help to be able personally brand the "visible signal."
If it requires editing server files, I may be out of luck, as my boss can't remember and didn't write down the primary server's root password for the third time.
Thankselphantasmo,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
I need block a particular site, just like in IE when i goto Privacy option I can specify and site & say Block - where can i find thi s in firefox?
I've been getting some junk websites while I am working. I need to block them completely.
Please advise. Thanks,There is no equivalent in Firefox. You can use the [https://addons.mozilla.org/en-US/firefox/addon/3145/ BlockSite] extension to add a similar feature.
If the junk sites are coming up whilst you are browsing, this may be caused by malware. You should consider scanning your computer with some malware programs. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D] -
"/" symbol where my disk should be mounted in disk utility.
I have a "/" symbol where my disk should be mounted in disk utility. I was just wondering if this is normal. I feel like it used to be a bunch of numbers and letters (probably saying where my disk was mounted). I have been having a bunch of hardware and CPU issues and maybe this could be why?
diskutil list:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 499.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *16.1 MB disk1
1: Apple_partition_map 32.3 KB disk1s1
2: Apple_HFS Flash Player 16.1 MB disk1s2
Diskutil cs
No CoreStorage logical volume groups found
Mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse) -
In Yosemite, I try to import mail from Apple Mail 8.0 into Thunderbird 31.20.0, but it says "No mailboxes found"--what should I do? I've tried all sort of other approaches, but none works. I'd appreciate any help. Thanks! Ken
Try copying the whold SD card to your desktop by holding down the Option key and dragging the SD card icon about 2 inches away from the where the card sits on the desktop. This should trigger Mac OS to make a copy of the whole SD card onto your Macintosh's desktop. Once it finishes from there, eject the SD card. Reboot your Mac then open iMovie without launching any other programs whatsoever. Go to the File Menu Import Movies from File... And point it at the copy of the SD card and see if it crashes again.
-
i have a macbook pro and it says i am online but for my friends it says I'm off. what should i do to fix this?
Hi,
Could you state what sort of names you and your Buddy have ?
Knowing which version of iChat we are talking about will also help.
However it is late where I am and further replies will be in about 20 hours (Sleep, work, in that order)
9:59 PM Monday; January 16, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My ipad says "ipad is disabled" what should I do?
my ipad says "ipad is disabled" what should I do?
are the original owner? where did you purchase it?
Maybe you are looking for
-
PLD report from user defined query
Hello experts, Is possible to create a new PLD report from a user defined query ? Thanks in advance. Best regards Andrea
-
Unable to create SUS Vendor User ID
Hi Gurus, I've ticked the "Portal Supplier" indicator in BP screen. System triggered XML msg to PI and received successfully in SUS. Unfortunately the processing is failed, XML error msg as below: <?xml version="1.0" encoding="UTF-8" standalone="ye
-
Cost center for Production Order
Hi all, We are now not able to get a report of Material consumption cost, Cost center wise. It is Because cost center is not linked to Production order or not linked to material issued to production order. Can we get the cost of material cosumpt
-
How to handle large result sets?
Hi All, I have a large result set to be displayed to user using jsp's. Problem is that result set is too big, so I can't display all the records in a single push. I want to show the results page by page say 25 per page. Now for every page I have to f
-
Wrong interpretation of special characters
I´m developing an application that using .NET Oracle Data Provider (Oracle.DataAccess.Client) to execute stored procedures that perform insert / update actions. When a varchar2 parameter value contains any special character, like a "â¢" (alt-0149)