Says sent box full all the time - but it is empty - cannot refer to any sent emails

when I write an email and send- it says sent box is full - I have compacted numerous times but no joy.
any suggestions welcome
I have 299 messages in sent now as have deleted alot bnad it say 4GB? inbox over 6000 and only 1.25 GB.

So your settings say:
IMAP mail acount:
selected: 'Place a copy in'.
selected: 'Other' and 'Sent on Local Folders.'
This means that although you use an imap account you are not saving the sent items on the server with all your other emails. Instead you are saving them in Local Folders on your computer.
Try this.
* Right click on the Sent Folder in Local Folders.
* select 'Properties'
* 'General Information' tab - click on 'Repair Folder'
* click on OK
* click on the small black arrow to the left of 'Local Folders' to collapse the Local folders tree.
* Then click again to open the Local Folder tree so that you can see all the folders again.
* Select / highlight all sent emails. (Ctrl+A); they should appear as 'conversations' in the Message Pane.
* Archive those emails - click on 'Archive' button. The emails should appear in the Local Folders Archive folder. Your Sent folder should now appear empty.
* Then right click on Sent folder in Local Folders and select 'compact'.

Similar Messages

  • My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

    My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

    Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
    If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

  • 40gb Ipod says "do not disconnect" all the time... please help!

    My 40gb ipod just says do not disconnect all the time when it is connected to my pc. itunes says the update is complete and my computer is recognising the ipod.
    please help!!!

    I'm having the EXACT same problem... it all started after I did the iPod software updater...
    HELP!!
    BTW - my iPod is the 20GB
    iPod is running fine (otherwise), but will not update, even though iTunes says update is complete. iPod screen continuously flashes Big Red Do Not Disconnect screen.
    Oy.

  • Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
    The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • HT1296 I have lots of apps that I don't necessarily want on my iphone all the time, but I don't want to delete them from my itunes account permanently. Is there a way to add apps manually?

    Is there a way to manually manage apps? I have lots of apps that I don't want on my iphone all the time, but I don't want to delete them from my itunes account permanently.

    Deleting apps on your phone does not remove them from your account.  They can be re-downloaded for free from the App Store, or synced from your computer as needed.
    The easiest way to manage apps is to connect to iTunes on your computer, go to the Apps page of your device in iTunes, select which apps to remove, then sync.

  • Phone makes "morse code" sound when in use, not all the time but quite frequently. The sound does not come from the speakers, infact it comes from the comments inside the phone.

    When in use my phone makes a quiet buzzing noise coming not from the speakers but the actual phone. It does not do it all the time but it is quite frequent, my phone is an iPhone 5. Please can you tell me what the problem  is?

    Make an appointment at the Genius Bar to have it evaluated by the techs there. This is not normal and is probably not something that a user can fix.

  • I use podcasts all the time but downloaded my first books from the istore this morning. how do I get them to my ipod?

    I use podcasts all the time but downloaded my first books from the istore this morning, I can't get them synced onto my ipod. What am I doing wrong?

    the audiobooks I purchased show up in itunes under books and under purchased items but i cannot make them sync to my ipod. I followed your directions but it did not help. I have drag and dropped to a playlist which shows up on itunes but not on my ipod even after repeated syncs. when I try to drag and drop to the books or audiobooks in the itunes list it gives me the NO symbol.

  • Mic is too sensitive, calls constantly cut out. People tell me y loud, and it sounds like I'm in a tunnel. Any background noise, and call is completely cutting out. This occurs all the time, but more so using earphones with in cord mic.

    I have iphone5 ios6 and the Mic is too sensitive, and calls constantly cut in and  out. People tell me there is loud background noise and it sounds like I'm in a wind tunnel. Any background noise, and call completely cuts in and out and sounds as if call is dropping. This occurs all the time, but more noticeable while using earphones with in cord mic. I never had this problem with my old iphone4. Has anyone experienced this, and is there a setting that can correct this problem?

    Same problem for me.  So bad in fact that I can't really use my headphones for calls.  I have tried it with several sets of headphones.  My primary are the Bang and Olufsen headphones which were great with the previous iphone 4 and 3. 
    Apple please address this issue.

  • I cannot get the edge dection tool to work i use to use it all the time but now i can't, how do i get it to work?

    I use to use the edge detection tool all the time but now I can't, how do I get it to work again.  When I try to use it, it will show the o with the line in side.

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Ipod is saying it's charged all the time, and won't connect at all to comp

    ok, so i have the white ipod nano, the first ones, and it's saying that it's charged all the time. you know the plug sign in the battery at the top of the screen, it's like that permanently!? and the only time when it's not showing it, is when the USB lead and the block charger that goes into the plug sockets is connected to it, which seems completly ridiculous i know, but yeh. and so when i want to connect it to the computer (obviously having to remove the socket block charger from the lead in order to connect to the USB port), it says it's charging again, and the computer doesn't recognise it whatsoever. anyone know how to sort this out, or any techniques to get the computer to connect to the ipod!?
    it's really getting on my nerves. i know my ipod is very old haha, but i hate the new ipods and i've been trying to rekindle it's life on many occasions haha
    pleease help, and suggestions would be very much appreciated!!
    xxx

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or maybe this:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • GE60 ONC - HDD scratching all the time but HDD usage near 0%!

    Hello to all!
    I recently bought an MSI GE60 ONC.
    I started the computer by running Windows 8 OEM. Then my nightmare began.
    1/ Waited almost 2 hours to DL Windows Update (60 upgrades found)
    2/ Extremely HIGH HDD usage was encountered 100% when using WU...
    3/ After all updates where done HDD usage at 0% down to 100% so I tought the problem was solved.
    4/ Now when starting my computer the HDD usage seems ok BUT my HDD is still scratching all the time as if he was working... I'm sitting on the desktop doing nothing but the HDD is always working.
    And now I heard a litle weird noise every 5 min.
    Refreshing Windows 8 with F3 DONE
    Installing Windows 8 with F3 DONE
    Help!
    PS: Sorry if my english is weird it is not my first language.

    how much system RAM you got?
    and yes HDDs are not much fastern and they N1 units which slow down systems.

  • 3g on all the time but use only wifi

    I would like to know, how to setup 3g on ipad in a way that the 3g will be on all the time, (for purpose of using it as a gps locator), but use only wifi for data.
    I have 10euro prepaid card and I would like to use it for emergency, I do not want to have pushed email while I'm driving ..etc.
    How to set it up?

    Having 3G on or activated shouldn't be necessarily for GPS - some people have the 3G iPad for its GPS capability and never activate 3G on it

  • F1 Key seems to be constantly pressed all the time but it is not the key

    My Envy DV7 was getting too hot so I decided to open it up and clean the fan myself ( After I cleaned the fan, It was very difficult for me to close it back, because the keyboard on this Pc is attached to the whole top so I had to take it to a laptop shop, so they can close it for me) When I finally got to close it the F1 key seemed to be pressed all the time when it is actually not, the thing is that it only happens when it first boots up after a while the laptop works just fine.

    It should only scan when you select the AirPort drop down menu. Anytime you do this it is going to scan for wireless networks in case you want to connect to one that has come online or gone offline since the last scan. That doesn't mean it is always scanning, it just means it is scanning anytime you use the drop down menu. This is normal.

  • IPhone 4 shuts down on its own all the time. Sometimes restarts without ability to make calls, receive emails, and the wrong time.  Only a restore fixes it.  What can I try?

    So my iPhone had a broken screen and back for a while, which may have something to do with this.  I mean like missing peices.  I realize this leads to corrosion and I may have a broken iPhone but this is a really strange problem.  It's always shutting off on its own, sometimes in my pocket while locked and sometimes randomly while in use.   For example the other day this started happening everytime I started safari.  This happens all the time, I usually just restart it and it works for a while.   Sometimes after shutting off a few times in a row, after restarting it will show the wrong time, screws up phone calls and says that it cannot locate the gmail server, or something to that extent (won't load emails).   The phone calls are weird, I can't receive any.   Any calls that are made from the phone, go through on the other side and ring for them, but won't ring or make a connection on my side, also I can't end the call when this happens, it responds to me pressing end by fading the screen to that graytone color that it does before ending usually but stays on that screen whenever you go back to it, only disappearing after reseting.  Texts work, not in iMessage, and internet seems to work.   The only thing that fixes this condition is a restore. The iphone has been turning itself off over the last 3 months and its been getting progressively worse.  Recently its been pretty bad, and then the phone started to do all that weird stuff I've been talking about.  That started about 3 weeks ago and has happened 4 times, the last two times relatively close together.   This is really annoying and I can't afford to replace it.   Do I have to live with it?   What can I try?  Should I maybe replace the battery?  I took the panel off to look at it and the plastic around it was pitted possibly from being really hot.

    Please don't respond with useless comments.  I've already addressed the fact that my screen was broken a few months ago.  My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone.  It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find.  Don't be a dickhole.

  • HT4528 My phone says its charging all the time but wont turn on

    My phone says its charging but wont turn I have it plugged in all day long and it just continues to show the low battery on the front! About every 6hours it will turn on for 5 minutes then shut right back off! Idk what's going on please help! All the support things on here want my serial number but obviously I cant get to it since my phone wont turn on!!

    Hello Monica121,
    Thank you for using Apple Support Communities!
    It sounds like the phone will not boot or load up even after being given sufficient time to charge.
    I had a couple of recommendations for this issue:
    First reset the device with this procedure.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If the issue persists after that, then I would try these steps from the iPhone: Hardware troubleshooting article found here http://support.apple.com/kb/TS2802.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Cheers,
    Sterling

Maybe you are looking for

  • Ipod wont turn on, or cant be seen on my computer or anyothere

    The only thing i can do to it is click the holf on and off, then hit the middle button and left for about 6 seconds, that turns on the screen, but i have tried the click hold, adn menu and center button I have tired this about 40 times, any other Sug

  • Error thrown while trying to connect the remote data base

    Hello, I am trying to connect the database(orcale 7) which is in the remote machine using Microsoft JDBC driver. But the following errors are thrown. If any one know how to solve this, pl let me throw some lite on this. Errir message as/./...........

  • Fans working extra time since last software update

    I have a MacBook Pro 13" (Late 2011) with Lion. Two days ago I updated the OS to 10.7.3(11D50). Since the boot after the update, the fans make a lot of noise and it seems like they work really hard. Any clue why is it or how should I solve this? Than

  • Pulsausgab​e mit Pulspausen

    Hallo zusammen. Ich möchte mit einem Counter der PXI 6713-Karte Pulse mit Pulspausen ausgeben. Dabei sollen Frequenz und Pulsanzahl während der Laufzeit veränderbar sein. Die Frequenz soll dabei zwischen 0Hz und 15kHz variabel sein. Bsp.: Ich möchte

  • Premiere CC poor quality quicktime .mov exports

    Hi all, I always experienced a poor video quality when exporting to .mov files. This happens from cs5 to cc, with the last quicktime version installed..in all pc. Video has artifacts, blocks, blurrines...a poor general quality. Using other NLE softwa