SB Audigy 2 ZS Platinum - Front/Center Channels Not Work

I've tried everything I could think of, software and hardware wise - reinstalling/updating drivers, re-seating the card and cleaning the contacts, complete reformat/reinstall of windows, toggling every software setting that I could find, etc. Has anyone else had this problem? And if so is there a way to fix it, or do I just need to replace my soundcard? Thanks for any input.

So, you're saying the surround L/R channels are working? I think we need to know what you're using for speakers. I would suggest swapping some of the cabling around and seeing what results you get from the speaker test. This will often give big clues as to whether the problem is in the speaker system, the soundcard, or the cables.
-Dave
[email protected]

Similar Messages

Rear and center channels not working

I just got a Griffin Fire Wave for my iMac and it works great when playing DVDs and such. But when I'm mixing in STP2 I pan the surround to the rear and I don't hear anything, I did a test to see if it exported in 5.1 and it did, I could hear all channels. But its frustrating not being able to monitor the
Ls Rs and C channels. Any Ideas?

Its definedly the soundcard which makes the funny noise, I just tested the outputs with headphones. Its really funny thing that center channel works perfectly if rear channel plug is disconnected, but you plug the rear channel plug it mixes up with the center channel also.
I just want to be sure before I send it to supplier (warranty is still good), because if it works on their computer they will charge me for 50? for the checking.

MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please help

Quote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents.

Center Chanel Not Working: SB ZS 2 Gamer & Klipsch ProMedia

Not sure which section is appropriate for this answer but it could fall under speakers or the soundcard
I've read a few things on here about getting my center channel to work, but no luck. I have Audigy ZS gamer and for speakers I have Klipsch ProMedia 5.
I've switched the sound panel in my control panel to 5., I've looked into the audio console as well in the EAX section s well as the CMSS 3D and still no luck. I've unplugged and replugged the wires as well. I know for a fact that it was working before I reinstalled Windows a few months back. I've done all the necessary driver updates as well. Any other changes or possible "buttons" somewhere?
Thanks in advance for any help

Does it work on the speaker test in the Creative software? If it does then try turning on CMSS.Message Edited by nvidiot on 08-27-2006 09:39 PM

Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
Anyone got any ideas???? I'm stumped.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

Left rear channel not working - Xfi

My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My iPod Touch Front Camera Is Not Working Properly.

My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
Please Help.
Thank You.

The poster said he has iOS 5.1 which is the latest update.
apple81 wrote:
Hi: I had the same problem but it was fixed by performing software upgrade iOS 5. Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

TS4079 My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

Did you flip the switch?
http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg

My front camera is not working, what to do?

Some pls tell me how to restore camera settings as my front camera is not working.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

The front row is not working. Remote control not triger,

Front row is not working, Remote control no response, command-esc not triger as well.
check keyboard shortcut from system preference, there is no front row.
anyone know why?

Ok first try it in another Account.
1. Open the account system pref window (System Preferences > Accounts)
2. Click the plus button at the bottom
3. Specify an account name (ex: test)
4. Add account
5. Logout of your current account, and login to the newly created one
If it works, then something was wrong with your account, move your files to the new account, and delete the old one.
If it did not work:
1. Try the reinstall again (DO NOT DO "ARCHIVE AND REINSTALL", as this may keep some file that is hindering FR from operating correctly
2. Make sure the FR file is in the Core Services Folder (Macintosh HD/System/Library/CoreServices/Front Row.app)
3. Make sure that you do not have the IR sensor turned off on your computer (System Prefs > Security > Uncheck "Disable Remote Control IR Sensor")
4. Make sure that your remote is paired (http://docs.info.apple.com/article.html?artnum=302545)
5. Make sure that the Command + Esc key is setup to respond by opening front row:
(1) Open system prefs
(2) Open keyboard & mouse prefs
(3) Click keyboard shortcuts
(4) Scroll down until you see front row
(5) Assign the Command + Esc key if it is not mapped
6. Finally, if all else fails, call AppleCare while your computer is still under warranty
Hope this helps,
Cory

My front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

my front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

Did you try to set it up "as new device" without using the backup afterwards? How to set up your iPhone or iPod touch as a new device
If this does not work, get it serviced or visit your next Apple Store.

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

My front camera will not work after I downloaded the IOS 7.0.4 .. Why is that ?

My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

SB Audigy 2 ZS Platinum - Front/Center Channels Not Work

Similar Messages

Maybe you are looking for