SB Audigy 2 ZS Platinum - no headphone sound from the front pan

Hi all,
I had replaced my old broken Asus Mobo with the same type. After all hardware was reconnected to the new mobo I have noticed the front pannel headphone output doesnt work.
I have connected the card and the panel with the proper cable, the pannel seems to be powered OK. I even connected the card and the panel with the internal firewire cable.
The only difference is I have this time installed the drivers from the Creative website, whilst I used the bundled CD with previous installation.
Would that prevent me from hearing the sound from the headphones?
Will appreciate your suggestions,
Greg
grzp at mp.pl

<!-- [endif] -->
<p class="MsoPlainText">Hey Ridenthatide,
<p class="MsoPlainText">?
<p class="MsoPlainText">I have the same problem as you. My system is MSI 865 PE motherboard and XP Pro SP3 with Audigy 2 ZS. I have reinstalled my system numerous times before and never had any problem, until this time....
<p class="MsoPlainText">?
<p class="MsoPlainText">- Format HD, install win XP, install SP3. Install Audigy 2 ZS driver and application from CD. Sound works.
<p class="MsoPlainText">- Install card's latest driver downloaded from Creative. NO SOUND!
<p class="MsoPlainText">- Device Manager shows everything ok. But control panel -> 'sound and audio devices property' has the device volume bar grayed out. Looks like system doesn?t recognize the card somehow.
<p class="MsoPlainText">- Install the latest application (organizer and other stuff), to no avail.
<p class="MsoPlainText">?
<p class="MsoPlainText">I tried to move the card to a different slot. After bootup, windows recognized new hardware installed, and started installing driver (I chose 'let windows auto search'). And sound came back. But if I re-install the latest driver again, the sound will go away.
<p class="MsoPlainText">?
<p class="MsoPlainText">I don't think moving card to a different PCI slot is an legitimate way of solving the problem, and problem still exists after the move. This has been really frustrating.

Similar Messages

  • Audigy 2 Platinum Ex -- no sound from external

    I've got internal system sounds, but no sound from the external I/O box. I've got standard RCA cables from my stereo to input3 on the box. I know I've got a signal there, because I can hear it through my other soundcard still installed if I switch to it. I just transferred the Audigy 2 from my old PC to a new one. It worked fine on the old PC.
    I've unchecked all the mutes in the control panel, played with volume levels, still no sound. I've got input selected as "what you hear". I do not see a specific "input3" selection for source. I only installed the drivers for SB Audigy 2, none of the other stuff (Mediasource).
    Any ideas for troubleshooting this dilemma?
    Thanks, Jerry.

    I don't have the External I/O module, but as a troubleshooting step, do the analog jacks on the rear of the A2ZS card work?

  • Audigy 2 plat- cannot get sound from headphone output, only from rear pa

    I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

    Inertia22 wrote:
    I put in the Audigy 2 zs from my old PC into my new one and I cant get any sound from the Headphones or Mic.
    Only sound from the external speakers. Any help would be greatly appreciated.
    If you getting sound from the external speakers....are we talking the ones on the laptop?
    Means you still have the onboard sound turned on at a guess.

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

  • I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

    i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

    You may get a better response in this community:
    https://discussions.apple.com/community/app_store/garageband_for_ios

  • Trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to do this on a macbook pro...please help

  • When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

    When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

    http://support.apple.com/kb/TS1630

  • I only get sound from the computer's speakers even though I put in headphones

    I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
    I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • Only getting sound from the left earphone

    I changed headphones to make sure its not a headphone problem but there is no sound from the right earphone. If I press the connector deeper into the socket then both the earphones work fine, however, I have to keep it pressed down with my finger. Does not work of its own accord. I have had it for 13 months now...any tips anyone?

    I have had a the same problem, only its my left headphone that doesnt seem to work.
    I've tried using dozens of headphones and speakers but the left speaker or headphone never works.
    I have found a cheecky way of getting some sound through however. If you push the ipod jack up at an angle to the roof of the ipod jack hole then you should find that it works. Just press down on the ipod jack (nib bit close to the speaker hole).
    Only problem with this is that you have to hold the ipod to listen to it and it can become quite tiresome. As soon as you let go it will stop sound going through that speaker.
    I did also find out that this happens to quite a few people and most commonly is caused when dirt (e.g. sand) gets into the ipod jack hole.

  • I have a 30 Gig 5th Gen IPOD It plays but there is no sound from the head phones and when its docks can anyone help

    I have a 30 Gig 5th Gen IPOD It plays but there is no sound from the head phones and when its docks can anyone help

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

    my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

    Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

  • Sound from the speaker iPhone 4S 5.1.1. disappeared!?

    About one hour ago I lost the sound from the speaker iPhone 4S 5.1.1. Lost in the middle of a conversation with a friend whom I put on speakerfon, first started to choking and after that sound is disappeared, and than appears in the fraction of a second and after is completely gone. On two occasions it choking when I put some videos and that's all. There is no sound even when someone call me, only vibrates. Note that phone was never dropped, as a new one, and I got it from July last year. Headphones works normaly. Any help without service?

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    More Info Here  >  http://support.apple.com/kb/TS2802

  • I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

    I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

    the hdmi should transfer both sound and picture
    http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
    Supports multi-channel digital audio output on compatible devices
    make sure your ipad is not muted
    make sure you volume is not all the way down
    make sure audio play out of the ipad when not connected to the hdmi adapter
    if you did and it don't work then it's likely an issue with the connetor
    or the tv or it's settings

  • No sound from the TV when using HDMI cable, No sound from the TV when using HDMI cable

    I recently purchased HDMI cable and adaptor, so that I can play downloads from my Macbook Air on my TV. There is only sound from the Macbook, not the TV - Do I need as separate cable for sound?

    I've got the same issue: when I connect my Macbook Air (2011) to TV via HDMI cable there's no sound through the TV system, only from the Macbook Air. I used to use my older Macbook Pro with the same HDMI adapter and it worked just fine, but not with the Macbook Air it doesn't.
    My software is up to date. I tried to select the TV as an output option in sound preferences, but it doesn't yield any results.
    Rebooding multiple times doesn't help either.
    Any suggestions on how to tackle this problem?
    Thanks in advance.

Maybe you are looking for

  • PC Suite - no USB and Serial Connection Type avail...

    I have been trying to solve this problem for days now. I have Windows XP and Nokia 5310. After I installed Nokia PC Suite, there is no USB or Serial connection type in the Connection Manager; it only has Blue Tooth and Infrared conection available. I

  • Computer Projector or TV with Bootcamp

    I have an Infocus projector that has DVI input, but the cable that came with it was from VGA to DVI. (I assume they expect only PC users to use the projector.) From my MBP I can display through the projector fine from the Mac 10.4.11 partition (using

  • Updating Media Content - stuck at Reset Read Only Attributes.

    I'm currently using - MDT 2010 on Windows 7 on a Virutal Machine. I deploy my images using a USB stick. (Advanced Configuration / Media). The process of creating a selection profile, Creating Media, and updating my media works perfectly. I wanted to

  • [MSI P4MAM2-V] PC keeps reseting when booting/installing windows XP

    G'day fellas. I bought a MSI P4MAM2-V yesterday, with new ram, psu, videocard but use a previous hdd. Now this hdd has XP already on it, so i tried booting into that with my new system. as soon as the logo for XP came up, the pc shutdown. Werid. So I

  • GRPO QUERY WITH FREIGHT

    Dear All When i run the following GRPO query (with freight) it shows me 2 lines when there is multiple freight lines in the freight screen. Can anybody guide where the changes is to be made in this query. SELECT T0.[DocNum] as 'GRPO Number',T0.[DocDa