SB Audigy 2 ZS Platinum Pro stutter during DVD playb

I've just recently installed the SB Audigy 2 ZS Platinum Pro into my PVR. I am connecting to my stereo system via the SPDIF connector using a coax cable. I've set, via AudioHQ, to pass through any Dobly Digital and DTS signals to my amp therefore the Audigy card is doing no decoding of any kind for digital signals.
The player I'm using is the latest VideoLAN player available (v0.8.4a) and have also set the player to use SPDIF output. When I try to playback my DVD's using VLC, the audio stutters constantly. I know it's not a DVD problem because when I switch the player back to normal stereo, the audio comes through fine.
My amp also detects the signal properly as it goes from Dolby Pro Logic to either Dolby Digital or DTS depending on which audio track I use from the DVD.
My system has a P4 3.0GHz CPU, GB RAM, 200GB HD (partitioned 0GB for OS, ~80GB for PVR recording, 0GB swap), with XP SP2. My swap is system managed and the OS has set it to ~.5GB.
Has anyone experienced the same or similar problem? Any help would be appreciated as I've banged my head against the wall all weekend long trying to figure this out.
TIA...

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

Similar Messages

Microphone connection problems with SB audigy 2 ZX platinum pro

I am using an old SB audigy 2 ZX platinum pro purchased back in 2004. It is installed on a PC that I stopped using it in 2005. The pc has no problems and I have started using it again.My problem is that I cannot connect the microphone. Everything was working fine at the time I was this pc including the microphone.At that time I had installed win xp pro( no service packs were available). But after I had to move physically in another location(connection and disconnections etc)and a pc format I cannot use the microphone again. I am trying to connect it to the front panel and to the appropriate places as indicated in the user manual but nothing is happening. I have connected properly the sound cart and all other components are working fine. I checked whether the microphone is checked to silent mode and all other software/di'vers nonetheless everything is working fine. I am now using Win xp pro sp3. I have contacted Creative and they told me to check the mic boost option. But there is no mic boost option now. I clearly recall that there was one when I was using this pc in 2004 under win xp pro(again no service packs were available at that time).One solution I could think is to format again and install some old version of win xp pro (say 2003 or so) and then update to current. But I do not want to format again since I do not have that version of windows available(copyright issues may also raise) plus for some other reasons I do not think I should mention them on an Internet forum. I also tried to download the latest drivers ans apps form creative ,clean installation from the orginal cd including Daniel_K pack and everything someone could think without solving the issue.Creative during our last communication in a very polite way told me to stop emailing them and try to solve the issue on my own as this product is no longer supported. One thing I neglected to mention above is that the mic boost option is available in the motherboard sound chipset. I checked it in one of my attempts to solve the problem. But it disappears when installing the SB driver. I know that if I manage to configure mic boost in the driver settings I will solve the problem.But once again there is no such option. Could you please provide with some suggestions and solutions on how to solve this?. Thank you very in advance for any suggestion and help

Anybody?

Help Needed : Audigy 2 ZS Platinum Pro Hub doesn't w

Hi all,
I got a wierd problem with my SB Audigy 2 ZS Platinum Pro. The external Hub is VERY unstable, I mean that I own my SB card for two weeks now and I have the following behaviour:
* Midi IN on external HUb doesn't works. "SB Audigy 2 ZS MIDI IO 2" is not visible on all MIDI applications (but "SB Audigy 2 ZS" yes!)
* CMSS light on external Hub doesn't turn green when I turn CMSS on
* OSD doesn't show and sound volume does not change when I change volume from the external Hub button.
* Remote control doesn't works but red light flash on the external Hub when I press a button on the remote control.
* FYI the optical out is always red which seems to say that the optical out is working correctly (but I haven't tested it because I have nothing to connect on it)
For complexifying the problem I succeed in making all this stuff works only TWO times (in tow weeks) by reinstalling drivers and NOT restarting the computer. In this configuration, all the previous points works. I means that I can connect my midi keyboard to the Hub and play music thought the MIDI IO (and "SB Audigy 2 ZS MIDI IO 2" is available when everything works), I can use the remote control, OSD is showing etc ...
I have really no idea why it was working only two times during these two weeks and I reinstalled the drivers and all softwares at least 5 times, rebooted the PC 30 times, etc ...
Does anybody encoutered and solved the same problem ? Does my Hub must be changed.
For your information, I have checked the internal configuration of my soundcard and everything seems to be correctly connected (including alim). I have also connected correctly the Two AD_Link cables. I have Windows XP SP2 on Intel 3Ghz with GB memory on Soltek QBIC system. No antivirus loaded.
Please help.
Thanks in advance.
UPDATE :
I had the support by phone yesterday and for the moment they have no explanation on what's going on ! I will try to phone again to the support tomorrow for advancing. For information they proposed me to do the following tests:
- Does the optical out light is red when my hub doesn't work - the response is yes
2- Does I have installed correctly the Hub alim - the response is yes
3- Does I have installed correctly the connection cables between hub and card - The response is yes
For information my analysis is that is doesn't comes from the software as when the hub work the CMSS light turn green during the boot of windows XP, moreover in computer science the behavious is most of the time reproductible. So from my mind it could comes from the following point:
a- PC Alim not powerful enouth
b- bad connection cables
c- hub is not working and need to be changed

Jminardi,
I think I am in agreement with conclusion b or c. Although there are a couple things to check, first off go to Device Manager and go to view/resources by type. In here look and see what the IRQ assigned to the Audigy 2 ZS is and see if it is sharing with anything important like the video card. If so you might try another PCI slot just to sure there aren't difficulties caused by this. If everything checks out you might want to call tech support back and try to arrange a repair on the external box and cables.
Jeremy

Audigy 2 ZS platinum pro and msvcrt.

scard: Audigy 2 ZS Platinum Pro
OS: Windows XP SP3
msvcrt.dll: 7.0.2600.552 located only in windows\system32 and windows\ServicePackFiles\i386
I tried to update the driver. (Full uninstall of the previous one as per the FAQ plus some cleaning tools like Driver Sweeper, Driver Cleaner, regcleaners etc) I started getting MANY msgs about "different".exe - ENTRY POINT NOT FOUND "The procedure entry point _mbsnbcpy_s could not be located in dynamic link library msvcrt.dll" (the"different".exe contains eg. CTRegSvr.EXE among others).
After restart the driver works but I don't have access to any Creative tools like the mixer for example. It's just the sound working. Nothing else.
I uninstalled everything again. After the previously described cleaning proccess I tried to reinstall the old driver from the installation CD. Same thing. Many errors during the installation proccess about "ENTRY POINT NOT FOUND on msvcrt.dll".
Any Ideas?
I appreciate the help
Pan

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Audigy 2 ZS Platinum Pro + Xbox 360

#Audigy 2 ZS Platinum Pro + Xbox 360? My xbox360 audio setup:
Xbox360 - Optical audio out - Dolby Digital 5. / Dolby Digital with WMA / Digital Stereo
Cable - Meter Fiber Optic cable audio Cable
Input - SPDIF/Optical-IN on Creative Sound Blaster Audigy 2 ZS Platinum Pro External Dri've
Decoder - Creative Built-in Dolby Digital/DTS SPDIF-In Decode @ 48/96KHz
Speakers - Creative Inspire T7700 7.
OS: Windows XP/Vista with Latest Creative drivers.
Concern:
1 - Whenever Xbox starts up - i have to remove the cable and replug it in for the sound to start coming.
2 - If i play any video or movie - there is no audio heard and after the movie ends - i have to reconnect the audio cable for the system sounds to return. (this does not apply to in-game FMV)
3 - Sound breaks and cracks in some games during multiple loud audio scenes. Such as in Forza3 - a car crash would cause cracking/breaking sound.
Overall most games run fine - I just dont know why no audio is heard when a movie is played! I've tried all different audio setups on the 360 but nothing works (WMA makes cracking worse)
Whats the cause and cure?

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Analog inputs no longer working on Audigy 2 ZS Platinum Pro's external dr

I have an Audigy 2 ZS Platinum Pro. After two years of use without problems, the analog inputs on the external dri've have stopped working. I get no signal from them, not even noise. All 3 inputs are silent, Line in / Mic and Line 2 in the front, and Line 3 in the back. Otherwise the dri've appears to function normally - I get output from the headphone jack, and the volume control knob works. I have not tested digital inputs or outputs, as I currently have no digital devices to connect to them.
I had made no major changes to my computer - software or hardware - when the problems began. I recently added a new SATA hard dri've, but the Audigy dri've did work after that.
I've taken steps suggested in another thread on this forum and uninstalled all Creative software and drivers, used the latest driver package's uninstall program as well as Driver Cleaner, and finally manually deleted everything related to Creative and Audigy from the system registry (and rebooted quite a few times in between). I then installed the original drivers from the CD that came with the sound card (a setup that has worked before), but still the problem persists.
Any ideas on where to even begin looking for a solution? I find it hard to believe that it's a hardware problem, since three inputs suddenly went silent at the same time, and no other connections were affected. Yet I've done as clean a reinstall as possible, and that hasn't solved the problem.
My current computer configuration:
OS: Windows XP Pro (SP2 and all latest updates)
CPU: Athlon XP 500+
RAM: 2x 52 MB
Motherboard: Abit AN7 (integrated sound chip disabled)
Video card: Sapphire Radeon 9800 Pro
Network card: D-Link DFE-530TX
Hard dri've : Seagate ST320026A, 20 GB IDE
Hard dri've 2: Maxtor 6L080J4, 80 GB IDE
Hard dri've 3: Seagate ST330083, 300 GB SATA-II

I don't have a Platinum Pro or the dri've, but a general hardware troubleshooting step I would take would be to remove the soundcard and either move it to another slot or re-seat it. Also, I'd disconnnect and reconnect all cables to and from the card and the dri've. If I had another machine I could try the card or dri've in, I'd do that. If I could borrow another dri've or even another card, I'd test those too. (Swapping parts is often the simplest diagnostic.) Yeah, maybe it's not a hardware problem, but I'd take these steps just to rule out some possibilities.
Edit: And if you can remove or disconnect the SATA dri've and restore the system to the condition before you installed it, that's another good test.Message Edited by Katman on 2-8-2005 2:56 AM

HELP! Hey, (Yeah YOU!) I need some HELP with an OEM Audigy 2 ZS Platinum Pro SB0360 installat

Hi Everyone.
I'm new here so I'll try to be kind and make lots of helpful friends, especially folks at CL.
Do you like a challenge?
Try this on for size.
My problem.
I'm working on a PC for a doctor friend. It's a Gateway P4 dual 3.0 gHz "Media Center" unit.
He let the antivirus proggie lapse and it was full of spybots, trojans and some missing stuff his kids (he says) had done (little kids like to click on stuff and he has 4 kids under 6 years old...).
Anyway, I needed to re-install the whole system back to the original state. GW2K docs seemed to make that a piece of cake.
Everything went well until the turkeys at GW2K threw me a curve - their CD re-install system just stinks. The CDs don't seem to AUTOSTART very well, the OS looks different than original (fo example - just plain ole XP Home instead of the neat-looking "Media Center" branding on the startup splash page), and then I got to a real problem.
The SB0360 Audigy 2 ZS (Platinum Pro, I think) driver from GW2K installed OK, but the associated apps CD keeps spitting back that it doesn't find a "Sound Blaster" card.
The Device Manager says its a Creative SB Audigy 2 ZS.
I've tried to use updates from CL but they also spit at me - "No Sound Blaster found, Exiting".
It seems that the Plug and Play only likes the GW2K driver, but the Apps CD don't like the "Creative" part, and so it balks. The CL drivers give the same message.
GW2K tells me to contact Creative Labs or (haaaa) SAM'S, the purchasing store.
Talk about the royal runaround...
Anyway, anyone got any good ideas?
I can't seem to find anything on the net to help.
I'm about Google-ed out.
Thanks in advance!
P.S.
I do have sound, Music CDs play fine and Windows sounds work OK.
I just need to install those Audigy Apps from the GW2K CD...
Message Edited by GrimWeeper on 2-02-2004 03:0 AM

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Audigy 2 ZS Platinum Pro - GigaWorks 7.1 - Tracktor DJ Studio - Setup help ple

I am trying to work out the best way to configure the following components so I can mix 2 tunes - listen to the mix on one channel and the incoming song on the headphones.
SoundBlaster Audigy 2 ZS Platinum Pro
GigaWorks 7.
Tracktor DJ Studio
Currently with the Gigaworks connected to the Audigy and the headphones connected into the External IO Hub - selecting any combination of channels in Traktor to become master or headphone yields all tunes being played through speakers and headphones.
Reading the spec on the Audigy it appears I can use Line out on the soundcard itself to connect the headphones direct - but with the Gigaworks requiring all 3 line outs - how should i then best connect the speakers?
The Traktor instructions indicate that this config is possible using a multichannel soundcard - which this is.
I've attempted config in Traktor using all of the following Audio Devices:-
SB Audigy 2 ZS ASIO [ECCO]
SB Audigy 2 ZS ASIO 24/96 [ECCO]
Creative ASIO
DS SB Audigy 2 ZS Audio [ ECCO]
No luck with any of them.
Im obviously not understanding something - and im sure im not the first person to attempt this.
Any help appreciated.
Regards
Simon

I think what you're missing is that the headphone out is really connected to the same signal as the front speakers out. The assumption is that you're either going to be listening to the headphones or to the speakers. Tracktor can probably use the soundcard channels independently, but anything directed to the headphones also goes to the front speaker output. I believe you can set things up so plugging in the headphones will mute the speakers, but that doesn't help the front speakers play a different signal than the headphones.
I don't think there's a connection setup which you can use both for Tractor and for 7. listening. You can probably get Tractor to send the output you want to hear on your headphones to line out 2 and the mixed signal to line out . That would mean connecting the headphones to what is normally the surround left/right output, which you'd need to disconnect from the speakers while you're doing this.
If you end up trying to rig up switching to help you go back and forth, using 4 Sony-type camcorder cables for line out 2 and 3, and 2 stereo minijack to RCA cables will probabably be helpful because it will be a lot easier to get RCA-connector switching than 4-pole minijack switching.
-Dave
[email protected]

Audigy 2 Zs platinum pro - Spdif in Prob

I ' ve got an audigy 2 zs platinum pro card and xbox hooked up to its optical in. Here is my problem:
- At boot up of xbox a stereo signal is coming out of it in dashboard menu. I can hear the sound coming out of the front speakers. When I start a game with dolby digital sound (fifa2005), no sound is heart. I unplug the optical cable and plug it rigth back. It says "dolby digital" on pc' s screen, and dolby digital sound begins (coming out of all speakers)
I guess that audigy accepts the first sound format coming from the optical in ( stereo in this case), and when the signal changes to dolby digital audigy does not recognize it. So when it is unplugged and plugged again, it recognizes that the format is dolby digital.
Is there anyway that Audigy looks to check if the format is same and changes it accordingly?

I have EXACTLY the same proble. There is not only no signal in, I cant hear anything monitored at all when using Cubase or in fact any other sound application. The only sound I can hear is when I plug my speakers/headphones straight into the back of the sound card. I checked my 'Digital Output Only' setting as previously suggested (it wasn't checked) - still no joy.
Somebody please help....

Audigy 2 ZS Platinum Pro - spdif and optical at the same t

Hi,
I own a Audigy 2 ZS Platinum Pro, DR release .84.40. I have an optical source and an coax spdif source that I would like to connect to the external module. I have found that as soon as I connect a spdif source the optical is cut off. I can't get it back on until I reboot. Is this as designed? Is the setup capable of taking two spdif and optical input at the same time?Thanks in advance for any help!

I'm no expert but I think he should be fine. Might want to make sure that both the computer and speaker setup are connected to a surge protector (I would recommend one with at least 3000 joule protection). With a good surge protector I don't think he will have any problems...

Audigy 2 ZS Platinum Pro to front case ja

Hello everybody!
Joined the forum to see if I could get this here question figured out. I've done a whole bunch of searching for the issue, stared at my card and manuals for... a long time... and cannot seem to come up with a solution.
I love Creative Labs, have just ordered an X-Fi Elite Pro and Gigaworks S750 to use on my new PC... and am turning my old PC into a lanparty machine of sorts, so I'd like to be able to use the front headphone/mic jacks without logging around the external I/O device.
I wish to simply connect my Sound Blaster Audigy 2 ZS Platinum Pro to the stereo headphone and mic jacks built into my case. The pins from the case are arranged in AC'97 form (a rectangle,) but are also split away from eachother, for use in whichever arrangement I need (this is what I assume I'll need to use.)
I have seen on many forums a white "J" port which can be customized and connected to... however, my Aud2 ZS PlatPro does not have this magical white connector. In fact, I see no connectors that would even appear to be helpful. All I have is a 5pin "Joystick" header, 4pin power connector, 4pin "AUX_IN", and 2pin "CD_SPDIF"
...Another option I thought might work for me would be to somehow connect the case pins into the 3.5 stereo jacks on the back of the soundcard... where the speakers would normally go! But how would I go about connecting those dangly female pins to the stereo jack? Simple wire soldering? Would I need fancier electronics?
Worst case scenario, I'd either have to A) use my mobo's onboard audio... B) get unlazy and reach around my case to plug in.
Thanks in advance for any light that can be shed on this subject!
Ross Adam Baker

Well - apparantly, nobody know how to fix this...
Well, I did find a solution... custom made a cable that went from the rear 3.5mm stereo jack into the pin block from the side of the case. Works like a charm, both headphones and mic!
Just thought I'd give you all an update!
~Ross Adam Baker

Audigy 2 ZS Platinum PRO meltdown All fixed

Hi all.
Normally I tend to help, but this time the tables have turned and I am looking for help. :smileysurprised:
My lovely Audigy 2 ZS Platinum PRO sound card was working lovley, no hickups or problems until I upgraded my monitor yesterday.
I have upgraded to a lovely CTX Triniton USB CRT monitor (to replace my old generic 7" monitor).
For some unknown reason EAX console nolonger works. It crashes with an error report.
"AppName: eax.exe AppVer: 2..8.0 ModName: unknown ModVer: 0.0.0.0 Offset: 0082ce85"
Surround Mixer no longer works either, in fact NONE of the Creative applications work, however the card works in games and music applications.
I am completely at my wits end. I uninstalled ALL of the drivers/applications and deleted the Creative directory. I am using the stock drivers and applications off the CD, but even THEY do NOT work!!!
HELP!!!
I reverted back to my old generic 7" monitor, but the problems still persisted!!
What is going on?
I did a full virus and spyware scan and that found NOTHING!!
Any help and advice would be appreciated.
PS I cannot reformat because I am using a RAID0 array which has important data on it.
Thanks
Message Edited by JohnZS on 09-09-2005 0:3 AM

JohnZS wrote:
Hi all.
Normally I tend to help, but this time the tables have turned and I am looking for help.
My lovely Audigy 2 ZS Platinum PRO sound card was working lovley, no hickups or problems until I upgraded my monitor yesterday.
I have upgraded to a lovely CTX Triniton USB CRT monitor (to replace my old generic 7" monitor).
For some unknown reason EAX console nolonger works. It crashes with an error report.
"AppName: eax.exe AppVer: 2..8.0 ModName: unknown ModVer: 0.0.0.0 Offset: 0082ce85"
Surround Mixer no longer works either, in fact NONE of the Creative applications work, however the card works in games and music applications.
I am completely at my wits end. I uninstalled ALL of the drivers/applications and deleted the Creative directory. I am using the stock drivers and applications off the CD, but even THEY do NOT work!!!
HELP!!!
I reverted back to my old generic 7" monitor, but the problems still persisted!!
What is going on?
I did a full virus and spyware scan and that found NOTHING!!
Any help and advice would be appreciated.
PS I cannot reformat because I am using a RAID0 array which has important data on it.
Thanks
CTX Triniton USB CRT --> does USB mean, there are USB hub/controller(s) 'onboard' --> how many USB controllers more can be seen on device manager? Some of these may share IRQ with Audigy or its 'add-ons'.
Try to disable all those new USB controllers 'comes with monitor' or turn them OFF (from monitor panel) if it's possible. You can then later apply them easily.
Also, did you install some software bundled with monitor. Thse may have changed some files to newer or older versions. Try re-installing SP2/directX/patches for OS.
.jtpMessage Edited by jutapa on 09-08-2005 :23 PM

Audigy 2 ZS Platinum Pro and Vista 64

I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

Is there no one out there that can help?

SB Audigy 2 ZS Platinum Pro stutter during DVD playb

Similar Messages

Maybe you are looking for