SB Audigy 2 ZS with older SB Live! 5.1 Platinum Live! Drive

I own an actual SB Audigy 2 ZS, which replaces a SB Li've! 5. Platinum. Is it possible to connect the Li've! Dri've II (CT4860) from the older Platinum card to the new Audigy 2 ZS?
Thanks for any answer.

Similar Messages

Audigy 2 card with Audigy 2 ZS drivers and Live Driv

I recently bought a Li've!Dri'veII bay for my system. To use this I plugged it into my Audigy 2 Value card which I have had for about 2 years. The bay came bundled with a SoundBlaster Li've! Platinum.
I tried to install my drivers, but as a Platinum, but the Bay still did not respond, didnt send anything out or receive a signal in. There is definitely power because when I plug in the headphones you can hear some white noise, but thats it.
I searched round for a solution and one was to install the Audigy 2 ZS drivers. I did this by following the following instructions:
http://driverheaven.net/showthread.php?s&threadid=45004
This allowed me to also enable lots of extras such as the THX console and other stuff previously unused as my Audigy 2 drivers didnt have them.
Now I have 2 problems:
) my Li've!Dri'veII Bay isn't working and
2) In games I get sound glitches such as random noises that shouldnt be there, Missing noises such as gunshots are not heard or parts of the noise are missing.
So what do I need to do to sort this out, because I do wish to be able to use my system to its full potential.
Thanks in advance to anyone who can help.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

Creative Live Drive 2 with Audigy 2 C

I bought my Audigy 2 card with some dismay at not being able to afford the platinum edition with its Li've Dri've. Well 2 yeas later Im proud to say I found for ?30 a Li've Dri've 2 bay, that can be used with my card. I eagerly installed the dri've in and booted up. Then i realised that I had no drivers for it. "No matter" I thought "Ill find them on the web". Well 3 days later I have not found them and my ?30 is going to waste and is sitting there doing nothing. I have downloaded the Li'veDrvUniPack and that opens and then says it finds no such creative device and promptly closes. I know this wont fall on deaf ears (eyes?) so thank you for your help.

You need an Audigy 2 or 2 Zs Dri've, but I presume that's just a semantic matter.
I'd suggest contacting CL Customer Support about getting the Software CD for the A2 Platinum as a replacement part.
-Dave
[email protected]

Cannot set up a microphone in surround mixer - SB Audigy 2 - updated with new drive

hy!
i cannot set up a microphone in surround mixer. this happend since i update the old drivers from CD rom (got with my audio card SB Audigy 2)with new drivers from your update site (SBAX_PCDRV_LB_2_8_000). i have made 2 screenshots that you can also see my problem. http://shrani.si/f/3J/pj/Py0pLJs/sb-audigy-2.jpg and http://shrani.si/f/3V/AO/hFfBELP/sb-audigy-2-2.jpg
on the pictures you can see that i can choose only between "cd digital/ s/pdif-in" or "cd digital/auxiliary". there is no microphone to choose. i didnt have that problem with older drivers!
have i installed a wrong audio card drivers or something?
please help!

ok. i have found a beta driver and i will try it.i?hope it work since nobody doesnt reply on this thread!
EDIT: now i can use microphone and for now its working just fine.
it would be nice from you that you tell me about this beta drivers. i spend a few hours to find drivers that could work!
but tnx anyway!
Message Edited by bostjand on -07-2008 03:00 PM

Live Drive I -port bay- with SB0410

Can I use a Li'veDri've I -dri've bay- (designed for the CT4830 card i think?)? with a SB040 card?

(Re: Li've Dri've I -port bay- with SB040 Please listen carefully. Old li've dri'ves work well with newer cards. Newer li've drivers DO NOT?? ALWAYS?? WORK with older cards. I have my very first li've dri've from 98 or 99 and it works with my FATALITY PRO PCI sound card beautifully. How about that? 0 or years old and it still works. But a newer Li've dri've with Infrared remote or firewire, etc will not work with an older sound card, because it does not know what all the new ports are or have outputs for those newer devices like firewire, etc. I use an Audigy 2zs dri've bay just fine with Fatality also, because I like the look and the color, but I only use the headphone and mic ports not the midi or optical jacks etc. Hope this hel
ps.

Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works.

Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works. So how can I fix this I have tried converting videos into different formats but it will not work.
Is IOS 8 really appropriate with Ipod Touch 4, if the older Ipods do not have the capability then why are we prompted to install new operating systems.
Thanks.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife. I restored it to original factory conditions. Now we cannot install iBook on it since it requires iOS 7. What can we do with older iPADS that are still 100% functional.

I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife. I restored it to original factory conditions. Now we cannot install iBook on it since it requires iOS 7. What can we do with older iPADS that are still 100% functional except for the fact that you cannot updrade the iOS above version 5?

Look at this similar problem in getting Netflix on an iPad 1. Same technique should work for you.
https://discussions.apple.com/thread/5753106?tstart=30
 Cheers, Tom

Using Windows 8.1 With Older Domain Controllers

Is there any document that would specify types of incompatibility we might expect when using Windows 8.1 with older domain controllers, either Windows 2000 or Windows 2003?
I assume at minimum that these older domain controllers would not have group policies that are able to support the full security policy feature set of Windows 8.1? For such cases, how do we configure security policy on those 8.1 domain member
computers? Would we use LocalGPO.wsf to import a local security policy, then join the computer to the domain to override just the settings that are supported by the domain controller and windows 8.1 in common?
Will

Hi,
You could refer to below guide to complete your migration process:
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012 R2
http://blogs.technet.com/b/canitpro/archive/2014/04/02/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Meanwhile, about the details how to migrate the doamin controller, I would like to suggest you consult Windows Server Forum for more professional help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverDS
Karen Hu
TechNet Community Support

My LR 5 is in a state of partial crash, many hundreds of photos I have recently processed having somehow been deleted. How can I talk with an actual live adobe expert person to find out if this is salvageable?

Suddenly today, in the process of going through a large backlog of images from the last month of wildlife photography, using Develop, and deleting large numbers along the way, I noticed that hundreds of images from the last week of my work have at some pointat some point in the last hour or two today, while I have been working on them, simply disappeared from from the Catalog's "All Photographs" and from the individual day by day photo folders in the Catalog. I also noticed when trying to figure this out that simply clicking the black flag bar after selecting an image as a prelude to clicking "Delete Rejected Photos" or even just clicking only the white flag, causes the selected image to disappear from all photographs and from the image folder for that day!! My last LR backup was a weeklyJune 16, but in the last week I have done several solid days of work processing these images. (Whatever happened does not appear to have deleted the raw images from my hard drive, all of which are backed up when I finished work last night.) Is there any way I can talk directly with an adobe live expert person to see if there is any way to salvage the processed images that appear to have disappeared from the LR system?

You generally won't get staff here but you will get help from people with a vast knowledge of Lightroom inside and out.
If what you says happens when you use the flag filter, is it reproduceable and does Ctrl/Cmd-z undo the removal.
Tell us your OS, Lightroom version and where the image files are stored.
You can always try the Help Chat but I think you will be better off here.

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007)

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.

Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank

Need to reduce `target-player` to support users with older Flash versions?

Right now we are currently compiling ZeroClipboard using the Flex 4.6 SDK, which has a minimum (and default) "target player" version of 11.1. I am uncertain if this is preventing users with Flash 10.x from utilizing ZeroClipboard but the documentation I found related to this certainly suggests that may be the case:
Use the target-player compiler option to specify the version of Flash Player that you want to target with the application. Features requiring a later version of Flash Player are not compiled into the application.
One reason for setting the target Player version is if you are unsure of Player usage penetration rates and want to choose a Player version that is lower than the most recent one. Another reason is if your users are locked in to a particular Player version, such as when they are on an intranet and cannot upgrade.
If users with older versions of Flash (i.e. 10.x) cannot use ZeroClipboard because of this, I would've expected more bug reports on it by now. However, as Adobe is pretty good about pushing Flash Player updates out, perhaps most users have already upgraded to 11.x.
Can anyone confirm or reject this hypothesis? Obviously our goal would be to support as many realistic user configurations as possible (i.e. support both Flash Player 10.x and 11.x with a single SWF).
Resources:
Targeting Flash Player versions
About the application compiler options
Backward compatibility
ZeroClipboard task to investigate this topic
Any help would be much appreciated. Thanks in advance!
Sincerely,
James Greene

Just to add to this thread the links I posted in the other one:
I can't speak to anecdotes like parents' or friend's computers, but in general Flash Player 10 is extremely widely available -- installed on over 95% of the world's desktops & laptops. There are more people still using IE 6 than there are people lacking FP 10. Even in enterprises, which tend to upgrade very slowly, FP 10 is probably on well over 75% of computers by now.
Catalyst projects truly require Flex 4, which truly requires FP 10... there's not much getting around that. If you absolutely must support FP 9, one option is to use Catalyst purely as a mockup/prototyping tool (for user testing, client/executive approval of designs, etc.) and then build the final app from scratch in Flex 3. You won't be able to directly reuse most of the material you created in Catalyst, but it can still be a valuable tool in this workflow -- we've heard from many people that Catalyst lets them create mockups far more quickly than tools they've used in the past.
Hope that helps!
- Peter

Trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), nad do I want to relace with older version. I do this and then it says change can't be done because Firefox is in use. ??

trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), and do I want to replace with older version. I do this and then it says change can't be done because Firefox is in use. ??

That version cannot be upgraded further if it's a 2G model. The 3G model can be upgraded to iOS 5.x.x. You can't have a 2G model because the maximum iOS version is 4.2.1.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

i bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
Look carefully but do tell us if you got this iPad reapired. Thanks.

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems
As stated earlier even though when I have an incoming message I hear the "Beep" Firefox does not open the dialogue window as it used to do.
Also I am not able to open a new dialogue window or tab by clicking on an online contact of mine.

Known issue, See:
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
this issue maybe fixed in beta/ nightly, you should try it
* firefox.com/beta

SB Audigy 2 ZS with older SB Live! 5.1 Platinum Live! Drive

Similar Messages

Maybe you are looking for