SB Audigy 2ZS Programs not working after Vista Instal

hey yours, after installing Windows Vista, many of mind Creative program are non-working. ex. creative surround mixer, EAX, THX ( all these program are came from the CD when I purchase the sound blaster audigy PCI card. even updated the latest drivers. when I tries to plays computer games like Medieval 2 Total War or Tom Clancy Rainbow Six that I tries to set for the EAX, they don't even go through. I dont wanted to go back Windows XP, because that wasting a lot of money.
So anyway I can set to EAX for PC Games?
I wanted to used creative surround mixer, anyway?
So, it's everyone are waiting for the Vista Drivers came out?
Since SB Li've and SB X-Fi are out already.
Thank You.Message Edited by QuanL7B_P on 08-5-200704:4 AM

Use the Windows' Volume Control. It actually is more advanced, allowing you to lower volume on a per application basis. You can also run the Creative Mixer in Compatibility mode, but I don't recommend it, as you may have problems. For playing DS3D EAX games under Vista, you need to download and install ALchemy:? This is essentially a wrapper, making DS3D calls into OpenAL, as OpenAL is currently the only library allowing non-Microsoft rendering on audio streams.Message Edited by alexs3d2 on 08-5-200702:05 PM

Similar Messages

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • IMessage not working after IOS7 install?

    iMessage not working after IOS7 install?

    Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

  • Adobe reader not working after cs5 install

    adobe reader not working after cs5 install

    Nobody can tell you anything without proper system info or other technical details like exact version info.
    Mylenium

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • T mobile broadband stick not working after lion instal

    T mobile broadband USB stick not working after lion install

    No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

  • Creative Console Launcher not working after Vista Ultimate upgr

    I have a Dell XPS700 with the Creative SB X-Fi soundcard and fi've speakers. Surround Sound for MP3, WAV, TV etc Was working great under Win XP Pro SP2. Now, I can't seem to configure the rear speakers. When I go to Start - All Programs - Sound Blaster X-Fi - Creative Console Launcher, I get a "The console for the current mode of your audio device cannot be launched." message and I cannot select the Entertainment Mode.

    Actually, you need to/should update your drivers (Creative *has* Vista-ready drivers for the X-Fi, including a new Audio Console). The only cards that Creative does *not* have Vista drivers for are cards *older* than the base Audigy (the only relati'vely new card affected is the Audigy SE). The base Audigy (in fact, *all* Audigy-series except the SE) has Vista beta drivers available (and a new Audio Console is part of the package).

  • RAID Utility does not work after Vista upgrade

    Hi,
    I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
    Is there any way to get the software RAID to work again?

    Hi,
    just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
    Please give some feedback, if you installed the RAID drivers for Vista during the installation..
    Cheers

  • Qosmio F30: Multimedia buttons not work after Vista Upgrade

    I upgraded my Toshiba Qosmio F30 laptop to the Vista Home premium that I got from microsoft.
    After upgrading, the multimedia keys (First row) is not working and also some of the shortcuts which is done by combining the control + Function keys (like Control+F1 to switch off the screen).
    After upgrading to Vista, I updated all my device drivers with the second software dvd received with the Vista upgrade.
    Also again I updated these drivers with the final Toshiba drivers for Vista dated 25/4/07 on the internet. How to restore the function of these multimedia keys and other keyboard shortcuts which is not working.

    Can I ask you: Where did you downloaded the drivers and the tools software?
    As I upgraded my machine I had the same problem, so a user told me watching on the Canadian Toshiba website and there I found some useful drivers.
    Maybe it helps, but I cannot promise you.
    http://209.167.114.38/support/Download/ln_byModel.asp
    Greets

  • Backing up actions - Not working after re-install.

    I recently had hard drive issues that led to PC issues so I decided to do a full re-install of Windows 8.1 and all my programs.
    After installing Ps CS6 64-bit, when I loaded my backed up actions into Ps, some of my actions would not work.  Giving me 'missing' notifications when I ran them.  Things like 'Vignette Portrait 15%' which involved the steps - new layer, selection, feather, inverse selection, fill, set current layer (15% layer opacity is what caused this label) - this one would not work.  I understand some of the more complex ones like logo placement which involved a 'paste' step would not work, because it doesn't know where to paste from.  But then wouldn't that be the same instance after a reboot?  Because it still worked after a reboot.  Simple things like a 50% reduction action worked fine with steps - Image size (width 50% with scale styles with constrain proportions).
    Is there any way to avoid this?  Is there another folder I need to back up rather than clicking 'save actions' in the action panel?

    Updating was the first thing I did before anything else, reason being I always have problems with Photoshop and Bridge crashing unless I update it.  Something to do with my video card I think.
    Used the Adobe clean tool.
    Installed CS6.
    Ran update.
    Then rebooted.
    Installed usual third party software.
    Reboot.
    Loaded actions and presets.

  • Mail search not working after clean install of 10.5.4 on new 20" iMac

    Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It happens with both "In Box" and "All Mailboxes" checked.
    What's going on?
    I did a clean install of Mac OS X on a 20" iMac using the Install disk shipped with the machine. Then I ran Software Update. Still, the problem happens, on a clean baseline system.
    Argh.

    I've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
    After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine.

  • The Flash player is not working after i install.

    Windows Vista 32bt. I downloaded flash player 11.8, and install. It will not work.

    If IE see
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Time Machine not working after Lion install

    After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

    After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

Maybe you are looking for