SB Audigy SE NO SOUND! Please H

Hello!?i?am sorry my english is very bad ^^ i come from austria?i have a very big problem, my onboard soundcard sb audigy se don't works, i have no sound in games and in windows. i have the actually drivers from the creative site ... i tried many things but it didn't help anything. my system: Amd X2 64 6000+????MSI K9N Diamond????4096 MB????GeForce 8800 Gtx 768 MB?i am very sad because i buyed this computer a few days ago, but the sound don't works and i have no idea what i should do. PLEASE HELP ME ?

A new computer and no Windows sounds.
One thing you may want to check, Click on Start>Control Panel> Administrati've Tools>Services and scroll down to Windows Audio and see if it is Started and set to Automatic. If not enable it.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Similar Messages

Sound blaster audigy platinum ex constant static sound, PLEASE HE

hey, i just got my sound blaster audigy platinum ex sound card today and the second i installed it and plugged in my speakers i got this static noise that would come out at all times, when i would play music you could hear the music softly, but still the static dominates. I disables my onboard sound and tried reinstalling in a different pci slot but still same problem. This is my first time buying a creative card and it has not been a pleasant experience so far. Can anyone please help me?
My pc is
windows XP pro
amd 3000+ 64
Asus K8V SE deluxe socket 754 via k8t00 ATXASUS

siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck )

Audigy 2ZS - No Sound!

For Christmas I got the audigy 2 ZS sound card for my 5. Altec Lansing Speakers. I booted up my computer and detected new hardware and installed it automatically and boom I had sound. Then I put in the audigy 2 ZS cd to install eveything and then asked to reboot so I did... then when windows started up I heard the windows start up tune and then it cracks out and I have no more sound. Can't listen to anything. I've tried several time unistalling the drivers and starting from scratch and the same thing always happens I get no sound after completely installing everything. I've noticed a number of people with this problem and I think Creative should finally help us out and give us a solution. I know its not the speakers as I've tried them on another system. Please help me out I've been struggly the past 2 days to try and get this to work and I'm getting tired of it...
Thanks,
Andrew

Hey,
The only thing i coudl think that might be the problem is when you installed the software and it asked you if you wanted "digital out sound" you selected it and continued with the instalation. That would prevent any sound coming out unless you are plugged into the digital port on you sound card.
Go into speaker settings in the creative folder from the start bar and make sure the digital sound box is unticked.
Let us know if this fails

I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

I don't have sound, please, help me !!

I don't have sound , please i need help !! Thank you very much

Hi Mr. Shahid,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if you don't hear sound from your MacBook Air:
OS X Mavericks: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH13841
Best,
Jeremy

Audigy 2 ZS sound from USB headphones but none from speakers

<Audigy 2 ZS sound from USB headphones but none from speakersw Hello everyone. Lately my computer has been acting up a bit (HP xw6200 workstation) and I updated the graphics and sound drivers to fix the issues with crashing. I first tried to update the audio drivers from the Creative support website but when the installation was finished and the computer restarted there was no longer any sound and all of the volume controls stopped working (sliders, buttons, checkboxes, etc. turned gray). I tried a couple more times to uninstall, then reinstall the driver but it still didn't work. Finally I went to the HP support website and downloaded the audio driver from there and installed it. Now the volume controls work again and when I plug in my Logitech USB headset I can hear sound just fine but when they are unplugged and I try to use my desktop speakers there is no sound at all. I played around with the volume controls, made sure the device and output was correct, and plugged the green output cable to the speakers in all of the sockets I could find while playing a song on Windows Media but it still doesn't work. Anybody have an idea of what might be going on and how to fix it's

@? OK another update (sorry I know I'm posting a lot). I downloaded and installed a different driver from the Creative support site and I now finally have sound in my speakers again. BUT the original problem I was having came back. Whenever I play a game (lately it's been Warcraft III) that seems to have more advanced 3D sound (more than, say, a web video on YouTube) the screen will all of a sudden turn some really weird pattern, the sound will stop, and the entire computer freezes; I then have to manually shut down (with the power button), wait a few seconds, then reboot. I thought this was a graphics issue so I downloaded and installed the latest driver for my video card (nVidia Quadro FX) which didn't help. Now I think it might be a sound card issue (or maybe motherboard?) because this problem doesn't happen when I use my USB headphones to play games. Might my sound card be dying or "breaking" somehow?

Audigy 2 OEM sound quest

I have a Audigy 2 value oem sound card.
Do anyone have a audigy 2 value sound card? Do you guys experience hissing noise on this card? Also I feel this card cannot take high level treble signal in music, even with my Sennheiser PX00. This is suppose to be a good head phone. I feel audigy 2 value is even not as good as the onboard sound. Is this because of this particular piece of card I have or it's because audigy 2 value suck?

Hello
I have the same card Too.
i have no problems with hissing. My problems are in very different aspects. With very low level of background effects in some games ( UT2004, Colin Mcrae 04) Infact with all games i have tried on My PC. These effects are weak in EAX console too. All other sounds are good.
I have problems with Dolby Digital EX decoder too. When I play DVD-Video I've heard sound only from rear speakers. when I check the field to hear rear speakers from rear and side speaker it is no effect.
I don't know wath to do. I have usin latest di'vers, eax console, and winXP SP2.
Thanks in advance!!!
Message Edited by Ewing on 04-09-2005 05:46 AM

Audigy 4 Digital sound set up. Help me please!!

I recently brought an Audigy 4 sound card. I want to hook it up through my digital amp so i can have 5. digital sound etc. I connected the card with an optical cable in the digital input socket on the card.....Nothing works.
What am i doing wrong?
Do i need a different kind of cable? If so which one? Or is there someting i need to do in set up?
Please help me. Many Thanks

Contacts are designed to be synced to a supported application or cloud service. If you have failed to use the device as designed, there is no guarantee that the contacts are safe.
iTunes will back up the following information
Contacts* and Contact Favorites (regularly sync contacts to a computer or cloud service such as iCloud to back them up).
* Your contacts are part of the backup to preserve recent calls and favorites lists. Back up your contacts to a supported personal information manager (PIM), iCloud, or another cloud-based service to avoid any potential contact data loss.

Audigy 4 pro sound card HELL please advise!!!

hi all,
right i'll TRY to keep it simple!.....
BEFORE my (recently brand new) hard dri've died and caused me all sorts of probs (and ?300) my soundcard was fine it was :
windows 7
audigy 4
cubase 4
daniel k's drivers (i think OR it was the one that came with the card)
with this i HAD the option of acti've X driver OR creative asio (used this as was much much better)
SINCE it died i've tried everything for days and days of hell to get this driver on, heres the symptoms:
using the CD that came with the audigy it takes 45 mins to load and then tells me there is NO sound card fitted (tried this 3 or 4 times)..
i physically took t?he card out (twice) and it made no difference and still didnt recognise any card fitted.
i've had to system restore a few times to get it 'see' ANY driver.....i've also downloaded some drivers but same symptoms as above.
using the acti've x the latency is a prob though i have adjusted it to make it work BUT am thinking this is one of the reasons my cubase freezes / crashes / and now makes crackling noise especially when using a reverb vst.
the whole system was great B4 this and i've lost 3 or 4 days and am now at the throwing it out of the window phase.
BEFORE it handled superior drummer as a VST and midi / audio files + reverbs all at the same time NO problem.
the current set up is almost identical and in fact a tickle better than B4 so WHY wont it see a sound card ?when trying a different dirver?
HELP! Si in Brighton.

ta...yes it does.
works (almost) fine with the acti've X driver, apart from telling me line/mic is NOT available....spent all day (again) trying to get the 3.8 daniel K pack on there.....came back with 'somethings wrong' meessage each time.
it just baffles me that my hard dri've
cd rom AND now (maybe) the card all ferk up at exactly the same time!
i recorded afterwards and it was fine for hours.....
cheers si

Lost My Audigy 1 Gamer CD Please Help!

I posted another question here asking for help so ignore it. I've lost my cd for my sound blaster audigy gamer card. I am trying really hard to enable my digital out on the card but can't without this software.

thomasbayer wrote:
Hi,
can someone please upload the CD setup in order that i can install the card.
It would be really nice.
Thanks a lot!
Hi
(Normally you should search this forum st, and then ask if not found what you're after!!!)
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677
jutapa

Audigy SE - No Sound - DirectSound Test F

Hey guys,
I have a Sound Blaster Audigy SE (PCI card) installed on a DFI Infinity n650i motherboard. I am running XP pro 64-bit. I have tried everything to get this to run (including everything posted here, clean boots and all).
Here are some facts:
- I have disabled the onboard HD audio in the BIOS.
- I have installed every set of drivers (deleting the old ones each time) that should support this system, but I cannot get it to play a single sound (the speakers work and are set up correctly, I made sure, every time, twice).
- Mostly, it will install everything correctly, but then just not make any sound. If I go to the speaker set up panel and test the channels, I get nothing there. (2. setup)
- This might be a critical clue: If I run diagnostics with the drivers that came on the cd, it passes all the tests (except making noise in the speaker channel test). If I run the auto update and get the latest drivers, it fails the directSound test (and the speaker channel test).
I am really stuck here, anything I should try next?
What is the likely culprit for a directSound fail error?
If I have to RMA this card (looking likely) what card will work more reliably with this setup?
HELP!

Sorry no help here but same or similar problem. Had problem with Realtek onboard audio which brought me to wits end. Disabled onboard and installed a Audigy Se. I have no sound from any line out and mic doesn't work either. I have an old but excellant speaker setup, MS Digital Sound System 80. WinXP Pro SP2 32 bit. Odd thing here is if I plug the USB in from the speaker system I get sound but still nothing out of Line Outs on sound card. Headphones or speakers get no sound from out ports. I did find in one forum that using the USB connection from the speaker system bypasses the sound card. So I uninstalled the drivers, unplugged the USB, reinstalled (figuring the install without the USB plugged in may make a difference), but still no sound from sound card ports. Instead I get the error message "Device Not Found. Please Select another Device In Configuration. Error Code 88780078". At this point I'm confused. Good Luck to us both.

Windows7 64 bit and Audigy 2 choppy sound while recording what you hear

Driver version I have currently installed 6.0..37 I tried to record off youtube in "What You hear" while using Wavelab5 mode and the sound is very choppy, I tried every setting I could think of but am unable to record, I managed to get one recording but tnext one with same settings is coming up rearry choppy. Another problem when browsing the support I click on "If your product is not listed above, please click here" I choose Audigy-->Audigy2 but I get nothing in the next window, I tried on FF and IE8 but nothing populates in the next field, found another way to get to the drivers but when I choose Windows 7 64 bit and choose drivers it takes me to the main support page here <a rel="nofollow" href="http://support.creative.com/welcome.aspx"]http://support.creative.com/welcome.aspx[/url]
I am on:
Intel Q2600
Gigabyte GA-X48-DQ6
2 x 2GB DDR2 - 800 CL4 Ballistix
Windows7 Ultimate 64 bit
Kaspersky Internet Security 200.
All current Windows7 updates are installed.
Oh yeah I can hear music (mp3, avi, youtube or any online source) no problem in either winamp, WMP2 or in Wavelab5 while monitoring. It's only the recording that is giving me trouble.
Cheers
Rob.

<div class="DownloadDate">"Release date : 3 Jul 09<div class="DownloadShortDesc">This?download is a?driver providing Microsoft? Windows?7, Windows Vista? and Windows XP support for Creative Sound Blaster? Audigy? series of audio devices. For more details, read the rest of this web release note."?
Right where do I start...... I got the latest drivers installed, "What You Hear" was working for about oh four recordings then stopped and back to choppy recorded sound, I went through alll options and nada. So I downloaded Audacity to see if this was a problem with Wavelab and re-tried. Well same thing choppy sound and even rebooting did not help. So I will be taking EVERYTHING!!!!!! CREATIVE off my machine, if these idiots cannot be bothered to release drivers that work then I'm going elsewhere. My music creating will have to be put on hold, my 22m will still have to sit in it's box.
Creative you are all a bunch of ?$"?%$%" idiots period. You have ALWAYS (till now in my case anyway) had good drivers. Even though Windows 7 has been in RC for ages you (absolutely missed that boat, hell you didn't even get up to try to catch it) cannot be bothered to write drivers that work and your idiotic half cooked attempts at customer service to give your bread and butter (that's right your customers who keep you in business) solid drivers are an absolute joke. YOU CAN KISS MY SHINY METAL HINEY!!!!! (thanks Bender lol). I am going to my onboard drivers. Thanks Creative (the name "creative" is kind of contradiction in itself, you should look up the meaning of the word lol). Oh and I will be advising EVERYONe who thinks of upgrading to Windows7 to avoid Creative hardware.
:angry::angry::angry::angry::angry::angry::angry:: angry::angry::angry::angry::angry::angry::angry::a ngry::angry:
Question for forum users: what is the best way to get rid of every bit of drivers?

I CAN'T RECORD INTO CUBASE SX 3 THOUGH MY OPTICAL INPUTS ON THE AUDIGY PLATINUM EX SOUND C

Hi
Can you tell me how I can get sound into cubase sx 3 via the Audigy Platinum ex optical card? I have an optical output on my seperate mixing desk whic I have linked to the optical input on the card, but I just cannot get any signal into cubase. If I attempt to record using the creative software recorder - it works perfectly! As soon as I turn on cubase sx 3, it just doesn't work. Have you got any suggestions please.

Hi
Can you tell me how I can get sound into cubase sx 3 via the Audigy Platinum ex optical card? I have an optical output on my seperate mixing desk whic I have linked to the optical input on the card, but I just cannot get any signal into cubase. If I attempt to record using the creative software recorder - it works perfectly! As soon as I turn on cubase sx 3, it just doesn't work. Have you got any suggestions please.

Audigy 2 ZS sound crackles when accessing hard dr

I hve been having problems recently with my audigy 2 zs. Whenever anything accesses my hard dri've I seem to get an awful crackling over my speakers (i do not know whether this is the problem but thats it seems to be the worst), which are the creative inspire 600, as far as i remember. This does not happen when playing DVDs or mp3 files stored on my hard dri've through WMP0 or PowerDVD. I have tried searching the forums and have not found an answer yet. I have also searched the KnowledgeBase and all of their solutions do not seem to work. It is rellystarting t bug me now. Ialso cannot get EAX to work through Call of Dty 2 anyore, i get an error messagesaying it needs debuging.
Also when i try to ue my microphone, i hear a crackling sound and I cannot get it to work. it is a new microphone that works fine on my mates computer, so i am guessing it must be something to do with my sound card. I have all the latest drivers from the creative website, but i still cannot seem to get my sound card to stop crackling!
Can anyone please help?

First I thought when installing those JMicron newest drivers that this issue is corrected but I was wrong. I can't connect anymore this to anything like before it was "clearly" hard dri've access related like it was. Now when I was surfing with Internet explorer it started to freeze again.. Goosh. I could use that integrated sound circuit or software cause at least it works but it's so crappy that I can't stand the sound quality on it. Perhaps I'm barking on wrong forum and I should be telling this to MSI support rather than here. Anyways, any suggestions are greatly appreaciated.

SB Audigy SE NO SOUND! Please H

Similar Messages

Maybe you are looking for