SB Audigy Value 5.1 Driver for Vista ???????

i cant find it ...i ve dloaded 2 of 'em, but they aint working

What sort of sound blaster 5.
I'm guessing you mean the sound blaster live
Have a look in this thread and you find a link to drivers for....
This pack Supports all Live! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
- Live! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum- Live! 5. MP3+ / X-Gamer / Digital / Platinum
Does NOT[/u] support the following OEM / Retail models:- Host / software-based cards including Live! 24-bit- any external Live! soundcardsThe full spec is here and the drivers are here.Note the 2 gig ram thing.
Message Edited by split0 on 06-14-2008 05:54 AM

Similar Messages

  • Still no working driver for Vista

    Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
    For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
    Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

    Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
    I've since reactivated UAC, but not driver signing since several drivers are unsigned.
    But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
    All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
    All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
    There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
    Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
    Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
    I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
    So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

  • Tecra S10-106 - 3G driver for Vista Ultimate 64bit

    Hello,
    I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
    Thanks in advance.

    Hi
    To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
    That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
    Hope that helps.
    Regards
    Phil

  • Compatibility of graphics driver for vista with xp

    I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista:  NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
    This question was solved.
    View Solution.

    luit wrote:
    I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
    I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
    OK.
    Now that is new information that you should have shared earlier with us.
    You need to use all of the drivers that are available at the ECS website for the  ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
    FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Audigy Value users.. enter your vista 32bit problem here

    i am experiencing a problem from the driver release of SB audigy value for vista 32 bit?my card is sound blaster audigy value 24 bit 7. st I install the driver... works great2nd... play games..3rd...play music mp3's4rth restarted my computer5th play again...6th restarted again...7th after windows vista open... its automatically detecting pci to pci bridge, and multimedia audio controller(means it got disconnected automatically and been detected again and reset it's setting to default)?8th... when i click the playback devices @ the taskbar and click speaker and go to properties, advance... 96khz and 24 bit is gone... i can make it work again by uninstalling the driver and all of its components and intall it again... and then a few restart later the problem will happen again?i've'' been testing this alway's? when i am using winxp i did not experience anything like this before.. check my board and soundcard to other pc which have win xp its working great... so that mean's your driver has a problem... it's about compatibility....
    kindly help me with this problem... thanks...

    Hi, thanks for your answer!-)
    I cought some virus and I think it was hidden in power saver and after the infected file was deleted, I turn on my notebook and the first message what I see is that the toshiba power saver has an error and would be closed. I don't know what power saver it was, I've tried to install a driver for XP , but it doesn't match here.
    Sorry for my english =)

  • Creative Sound Blaster Audigy Value/SE/LS Driver 01.04.0

    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit Vista Beta Driver 0.04.0055
    Yeah, 32-bit, wooo.
    When will a 64-bit version be available?

    Has anyone tried the "AMD64" Driver for the Audigy Value (I assume this is the SE?) that is on the bundled CD?
    I tried different driversets from the download/support site to no avail.
    I didn't think about the CD driver until I got to work this morning.
    Really wishing I picked up the Li've! (yesterday) instead of the Audigy Value now
    ...expected this card to have a better chance, especially with "x64 drivers" on the box.
    Oh well, I'll give it one more shot tonight with those CD drivers... hopefully something will work.Message Edited by abz on 2-07-200604:08 PM

  • SB Audigy Value CMSS Successfully Enabled in Vista, if you call it CMSS

    I've been trying to enable CMSS (at least hear sound from all of the 4 speakers) for a long time and finally successed but in a very strange way.
    Steps written below are spesific to my system (SB Audigy Value, Onboard Realtek ALC 850) but can? work similar way on others i guess. For SB Audigy Value 6 Feb. Vista drivers are installed. U can use old XP drivers as explained in the forum too.
    I've been using my onboard audio device (realtek ac97) since I can't enable cmss on SB Audigy Value, so Realtek AC97 audio drivers were installed on my system. You can download Realtek AC97 audio drivers? from [url=ftp://202.65.94.22/pc/audio/623_Vista_APO.zip">ftp://202.65.94.22/pc/audio/623_Vista_APO.zip[/url]
    Download and install it (first enable the device from bios if you haven't)
    After installing the drivers,
    -) Open "Playback Devices/Speakers(Realtek A'97 Audio)/Properties" window and open "Enhancements" tab.
    2-)There's a "Speaker Fill" effect there. U can take sound from all speakers if u enable it on Realtek AC97 device. And let's import this to our SB Audigy Value device. I say "Import" because i noticed that?"Enhancements" tab is actually a set of registry entries which points to some features from Realtek device. So,
    3-) Open registry editor. Go to
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\MMDevices\Audio\Render\
    Under the Render key the playback devices are listed as some numbers and letters like,
    {50a7cf0-aad0-444c-a56b-ce655444d}
    4-) U have to find your own device (realtek speakers) , for instance my device is represented by {50a7cf0-aad0-444c-a56b-ce655444d}.
    (This is for Realtek ALC 850 model, may be different for other models?I guess)
    5-) Under {50a7cf0-aad0-444c-a56b-ce655444d} key you can see "FxProperties" Key. Rightclick on it and export to a file. Save it as RealtekCMSS.reg for instance.
    6-) Then find your SB Audigy Value Speakers device. (ES/LS whatever...)
    Mine is {5ecbbccc-eca-446-aa2-a7390cf094f6}.
    7-) Rightclick on it and select "Permissions"
    Go to Advanced/Owner, and change the owner to administrators.
    (Don't forget to select "Replace owner on subcontainers and objects)
    8-) On "Permissions for {5ecbbccc-eca-446-aa2-a7390cf094f6}" window select "Administrators"
    and select "Full Control" to allow. Then click OK.
    9-)Close registry editor and open RealtekCMSS.reg in notepad.
    0-) Replace {50a7cf0-aad0-444c-a56b-ce655444d}
    ????to {5ecbbccc-eca-446-aa2-a7390cf094f6} using replace function.
    -)Save the file as SBAudigyCMSS.reg and execute it.
    2-)Now go to
    "Playback Devices/Speakers(SB Audigy)/Properties" and you'll see "Enhancements" tab.
    3-)In "Enhancements" tab enable "Speaker Fill"
    Open an mp3 and test your speakers. Other effects work too.
    From now on you can disable your AC97 device from bios. But don't uninstall Realtek software.
    Message Edited by atabrk on 04-26-200708:09 PM

    The previous post is inaccurate:? CMSS includes many modes, which will work depending on the speaker configuration. This means that CMSS set?to ON on 5. speakers is not the same as CMSS on Headphones. The selection is done automatically, depending on your selected speaker configuration. For example CMSS on headphones uses HRTFs to produce the effect, while on multi-speaker systems it simply maps and pans the sound. From my experience, CMSS works?good on headphones, not only for games, but for music as well. It expands the soundfield, where on simple stereo and headphones you normally hear the sound inside your head. My opinion is, that CMSS sounds much better on headphones than on speaker systems.

  • Nvidia Geforce 8600M GT Driver for Vista

    Hi mac-world!
    I'm using BootCamp to start Windows Vista on my Mac Book Pro. I recently bought a seperate TFT-Display from Belinea, which I connect to my Mac Book via DVI. This isn't a Problem while using MacOS, but in Vista I can't adjust the resolution of the seperate Display to more than 1024x768 px. I already installed the Belinea Driver, but that doesn't solve the problem.
    I am wondering, if I maybe need a driver update for the grafic-card. Unfortunately, Nvidia doesn't provide a driver download, but says, I need to contact my Laptop-Vendor for this issue. I didn't find a driver-download section on this page. Does someone know a solution? Where do I get the new driver?
    Thanks in advance
    regards
    Thorsten

    In my case after going through normal Shut Down procedures, I
    noted that after I go through normal shut-down-from-Windows, the machine does not power off. I can only turn off the machine by pressing the power switch for a few seconds.
    When I do not press this switch, Windows restarts after about ten minutes;
    after, however, I receive a brief report (which I never manage to read in full)
    informing me that a software may not have been properly installed or that I
    need a windows update.
    This problem appeared long after I installed all the software that I use,
    and I have checked whether I'm fully updated (I am).
    Lately when I start-up after experiencing this problem, Windows indicates
    that the problem is caused by an NVIDIA graphics driver and suggests that I
    check for a driver update. I have tried the NVIDIA Website but there was no
    reference to the graphics card installed in my machine, namely GeForce 8600M
    GT - I only found a driver for GeForce 8700M GT.
    I have since solved the problem as rerported in http://discussions.apple.com/thread.jspa?threadID=1492731&tstart=0
    However, I stll wonder why there is no reference to 8600 in the NVIDIA site.

  • NVIDIA GeForce 8600M GT driver for Vista x64

    Hello,
    I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
    It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
    I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
    'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
    I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
    Anybody has the same issue?
    Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
    MacBook Pro 2.4Ghz   Windows Vista   nVidia GeForce 8600M GT

    There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
    I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
    So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
    Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
    Message was edited by: Melnyk

  • Laserjet 4050n basic driver for vista causes crash on print command

    This is a printer that works fine with several windows xp systems on the network, but on this LG LGR40 laptop, the print command causes a bluescreen crash. A previous intsallation of different drivers for vista caused the same problem. The OS is completely uptodate. Pls help!!!
    Here's the incident report from Vista:
    Product
    Windows
    Problem
    Shut down unexpectedly
    Date
    29/03/2009 9:33 PM
    Status
    Not Reported
    Problem signature
    Problem Event Name:    BlueScreen
    OS Version:    6.0.6001.2.1.0.768.3
    Locale ID:    4105
    Files that help describe the problem (some files may no longer be available)
    Mini032909-02.dmp
    sysdata.xml
    Version.txt
    Extra information about the problem
    BCCode:    1000008e
    BCP1:    C0000005
    BCP2:    8CBFBC49
    BCP3:    A72CFC98
    BCP4:    00000000
    OS Version:    6_0_6001
    Service Pack:    1_0
    Product:    768_1

    The printer is on the network, so it's directly to IP address.
    The driver was installed as admin user
    No problem with the printer for >8 years.
    No other vista systems. 

  • Missig Driver for Vista

    I have an old Tungsten T3 and just bought a new HP with Vista home.  I have download the new vista desktop manager.  Everytime I try to sync the computer tells me it needs to look for a "driver" for a new device.  My previous laptop also had vista and I did not have this problem.  I am using a new USB cable.  Could this be the problem?  Or am I missing a driver patch?
    Post relates to: Tungsten T3

    Hi, and welcome to the Palm Community Forums.
    By "new vista desktop manager" do you mean Palm Desktop 6.2 by Access?  If so, that version is not compatible with the old T3.
    If you go to the Palm Desktop download page, select your device and Windows Vista, it will lead you to a downlad of Palm Desktop 4.1.4E.  This is the one you should try.  Note, the Quick Install tool does not work with 4.1.4E under Vista, but normal data synchronization should.
    Post relates to: Centro (AT&T)
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Laserjet 3100 driver for Vista OS

    Need help finding a driver for my Laserjet 3100 on Vista OS
    Thanks

    DA61--
    Here's another idea, with a caveat.
    **I do not know if it will work. Please create a restore point on your PC before attempting this.**
    Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
    http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
    Please let me know if you try this and how it turns out.
    Best,
    AlliBee
    I am an HP employee, but opinions expressed here are my own.
    Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

  • Satellite A60-156: Where to find graphic driver for Vista

    I've recently upgraded my A60 with new dvd, memory and hard drive.
    Upgraded to Vista and all works perfect except i cannot find an upgrade for my display driver.
    Just shows as standard graphics adaptor and i cannot get any 3d functionality on it even for Vista Windows games or screensavers.
    Can anyone advise as to where I can get updated drivers for this function? Graphics card is ati radeon 7000igp.
    Thanks.

    What to say It seems Toshiba page doesnt provide any Vista drivers for this unit.
    So you could try to use an graphic driver from the 3rd party website like www.omegadrivers.net
    But note; these are not Toshiba drivers and therefore the drivers are not tested on the Toshiba notebooks. You can install it but only at your own risk.
    Best regards & good luck

  • Sound Blaster Live! Value Sound Card Driver for

    Hi, I have an older sound card that I purchased in 200: Sound Blaster Li've! Value Sound Card. The website doesn't seem to have the driver for this specific model. I'm looking for an Windows XP driver. Can anyone direct me to the right place to download this?

    http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=24&y=3
    They really should make the "Search archi'ves" link on this page,
    http://us.creative.com/support/downloads/welcome.asp?action=next
    bright red and about six inches high.

  • I have an 8300 a3 printer driver for vista not working

    hi all
    when i download the driver for the 8330 or 8350 for vista they dont work
    when i opened the startup information is says 5100 series for windows xp does anyone have a solution for this
    thankyou

    Make sure your scanner is on. Go to System Preferences > Printers & Scanners
    If you've been using your scanner before the update, then you should see your scanner in the left-hand sidebar. (If not, you'll have to add it by clicking on the + sign.) Click on Open Scanner. It will scan, but I would rather not have to go to System Preferences to scan.
    Solution - use application Image Capture, a default Mac app in your Applications Folder. Drag it to your Dock. Launch application. You will find your scanner under Devices. VOILA!
    It's not the same Epson Professional scan window I'm accustomed to using. It's now a part of Image Capture. The Scan interface is much cleaner.

Maybe you are looking for