SB CT4810 audio prob

Hi all,
first of all I'm sorry for my english ! :-(
Ok. I have installed one pc two sound card. Initially a ES37 but I had some audio problem. So I think that there are some device problem. I have change model with CT480 but I have the same indentical problem. Audio is bad..very bad.. not only with the normal speaker but also if I use a external Aux.
I have try to use some different driver (form creative and form other source)but the proble is always the same. No good audio.
Someone has some suggestion for me ? for solve the problem ?
Thank's for all
Tiziano

chrischin wrote:
taezius, what you mean by "Audio is bad..very bad" ? Are you saying the sound coming from the speakers are bad? They've poping and cracking sounds?
Hi ....
bad means very bad. with a lot of noise and a wrong speed.
Do you have some idea ?
Regards
Tiziano

Similar Messages

KT4VL Audio prob....Help???

I have been trying to setup the sys below now for three weeks. Have used this forum and suggestions with no success, to include MSI Hardware/OS install sequence req.
I am currently using this sys with a fresh install of XP. All BIOS are at default save FSB @ 133 and Audio = disabled.
I have set FSB @ 100 and 133 Enabled/Disabled APIC/ACPI, LAN, USB, Audio etc... in every possible combo.
The minute I enable ANY type of AUDIO device... crash o-matic. This includes Audigy2, Onboard Audio (with or without speakers) and USB Audio.
Without Audio I've run benchmark, system stress/burnin utilities loaded all other drivers without any errors/crashes.
With audio I get BSODs, reboots, Explorer errors, CRC errors, missing/corrupted file errors, service not available errors, but only when any audio device is loaded.
At this point my presumption is a defective mobo, but before I submit for an RMA one last try for any suggestions/opinions. TIA

Never get the chance to uninstall had to reinstall a fresh copy of XP after enabling or connecting any of the mentioned audio devices.
Onboard audio was allways disabled in bios prior to installing windows.
Try latency at 32 and 64 same results.
Cleard CMOS half of the time prior to reinstalling XP. Even remove power and batt for 10 hours twice same results.
I though the same but I've disable all devices that share IRQ's ie... LAN, all USB's
I've tried slot 3,4,6 same same.
I ran the system with all update and latest drivers for up to 8 hours without audio. Enable/Add/Connect an audio device, it will crash in less than 5 min. Once it hits a reboot on next load will run checkdisks-load-reboot, checkdisks-load-reboot, and so on.
Edit: I talked to MSI Tech he said the prob is one of the following: Mobo, CPU, Mem, PSU
Since I have two PSU's and two sitck of Mem and tried both it must be CPU or Mobo
I sent mobo to tech will find out

Imac 8,1 audio prob until wakes from sleep mode

audio pulsates
usb communication with majic jack pulsates
something to do with new system install

Does it do it with Magic Jack unplugged?

Pp cc 2014 import audio prob

help please! tried to import clip into pp cc2014 and the audio is out of sync will video file its never done this before? file on the card is all good.
shot on canon c100 avchd. could this be a update problem? using a mac

Are you doing as it describes in the links below?
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

Creative soundblaster x-fi xtreme audio PROB

Hello!
Ive just bought a ceati've soundblaster x-fi xtreme audio some days ago but it dosent work properly.
I bought a ( http://www.clasohlson.se/Product/Product.aspx?id=383530 ) becouse i wanted to connect my PC to my reci'ver but i cant choose Spdif in the console launcer.
-It just says unknown or no signal in the Digital I/O menu.
What am i doing wrong?
Help!

The Digital I/O jack on the Xtreme Audio soundcard isn't an optical out jack so you can't use an optical cable directly with the card. If your receiver has coaxial jack, you can get a 3.5mm minijack to coaxial cable to work with the soundcard.
JasonMessage Edited by Jason-CL on 04-08-2007 02:6 AM

Can anyone help with Quicktime Pro audio prob?

I've been trying to compress an audio/video file shot on my Cybershot so that I can upload on a contest website. Every time I copy into I-Movie, I have no audio (although it plays fine on my desktop). I was told I-Movie does not support muxed streaming. At Apple's recommendation, I upgraded to Quicktime Pro.
The audio and video both work fine when I play it in Quicktime Pro; but when I export it from Quicktime to either MPEG4 or Quicktime Movie, I get no audio. (Also, the audio setting area is grayed out.) Any suggestions? I need to send the file 320X240 around 15 mb by midnight tonight.
Thanks for the help...

Use the "Export to DV" option. (Any of the sub options will work.) Split into segments if needed for older versions of iMovie.

Audio Probs W/I Tunes

When i start itunes i have no probs. it is after i open the store & play snips of songs. I can listen to maybe 3 then it stops playing, from both the store & my library. Not frozen i can still click on things, just doesn't play. Sound still works, have updated drives, taken off any plug-ins, everything the site has suggested. it still doesn't work right. it has only started happening since i updated to the newer version. Please help.
Thanx.
Compaq laptop Windows XP

Oops--I just found the missing checkmark on the preferences menu. (Wonder how that got itself unchecked during the upgrade?) Nevermind!

So Strange : Video Fine but Audio Prob :((

I've encountered a strange problem in my search for best settings for videos.
For H264 encoding, I tried using settings of:
768 Kbps(video) + 160(audio)--> iTunes transfers to iPod, but iPod just displays black screen for 5-10 secs, and then go back to menu. Settings for as low as,
384 Kbps(video) + 160(audio)--> iTunes transfers to iPod, but iPod just displays black screen for 5-10 secs, and then go back to menu.
But Strangely, video bitrate isnt the problem, since playing with the audio settings i find,
768 Kbps(video) + 96 Kbps(audio) runs fine on iPod, whereas
768 Kbps(video) + 128 Kbps(audio) gives the same problem as above, i.e. video transfers to iPod but doesnt run on it.
For all the above settings, when iPod is connected to PC I am able to run the video from iPod on my PC. But the video just wouldn't run on the iPod until I use a lower audio bitrate, which *** for music.
Note: BTW I use Videora for encoding my videos.
Intel Pentium4 Windows XP Pro

By "toslink" do you mean digital optical cable? I have tried running a digital optical cable from the ATV to the Sony receiver along with the HDMI cable from the ATV to the Sony reciever and still did not get sound our of the receiver when on the receiver is set play for the HDMI port selected.
Here is the thing. I have Blue Ray player with a HDMI cable running into the Sony Receiver port and a digital optical cable running from the same Blue Ray player to the Sony Receiver and the sound is fine. I was doing the same thing with the ATV (but using the DVD port on rhe Sony Receiver for the ATV).

Stoopido modem/audio prob

Dearest all,
HEEEEEEEELP!
Had my k7n420 since may this year and this problem has always existed;
When my pci modem dials / disconnects it causes the computer to have a quick case of the gitters; audio stutters and the mouse doesnt move. This doesnt happen for more than a second but its a large annoyance all the same. Tried everything to sort this; the onboard audio and modem are not sharing IRQ's, I have the latest drivers for both modem and motherboard and the modem is in PCI slot 4.
What the bleeding heck can I do?! ;(
Thanks in advance for any suggestions.
Nadz
[size=11]Msi K7n420 Pro
AMD Athlon 1700 XP
Windows XP Home
Onboard sound/audio
Modular Technology Lucent PCI V.92 56k modem
LG 12x10x32 DVD / CD-RW
TEAC 32x CD-ROM
Original BIOS Version (too scared to update!)
Latest drivers from NVidia site.[/SIZE]

Hey guys, thanks for the replies.
Here's how Modular Technology described my modem:
[size=11]"the correct description is a ‘controllerless modem’, this means that it performs all the modulation and demodulation without taking resource from your PC processor. The PC processor handles only error correction, data compression and dialing control. The term Win-modem simply means that its driver runs under Microsoft Windows." [/SIZE]
So it appears I have infact just bought a complete crock of sh*t!! That'll teach me to rush out and buy the first thing I see! :O **gives verbal bashing to self**
Modems are far too complicated now-a-days. I miss my ISA modem. Worked like a b*tch on speed and never let me down! Can you get completly hardware-based internal modems now then or not? Problem is i like a nice clear desk, and an ugly box of flashing lights is sure to make me head-butt something. Recommendations greatly appreciated!
Thanks guyz!
Adam

Odd Audio Prob

Hello,
I've contacted Creative with this problem, but they offered little to no help; so I'll copy and paste what I wrote to them:
After having a new Asus A7n8X Deluxe motherboard placed into my computerI noticed, I've had some audio issues with my Sound Blaster Audigy ES "SB062". The issue is the great annoyance of having no audio when playing MP3, orany audio file format. The only way I can retrieve audio in that file isto hit the STOP or PAUSE button on the media player (Windows Media Player, Real Player), then to hit PLAY again. I wasn't able to find specific drivers on this card, so perhaps I mixed up drivers for the card and this is causing the issue; I'm unsure. Any assitance would be greatly appreciated. Thanks,Aaron.
In their support letter, they told me to download the Audigy LS drivers, which were to no effect due to the fact I don't have a Sound Blaster Audigy LS. I've noticed this problem affects everything, from video files to audio.
http://www.newegg.com/app/viewproduc...d&CMP=OTC-C73T
My Card
Message Edited by aarono on <SPAN class=date_text>-8-2004 <SPAN class=time_text>2:52 AM
Message Edited by aarono on -8-2004 2:52 AM

Aarono,
Could you look on your Audio Card and give us the model number off of the card? It usually begins with SB and has 4 numbers in it. Also if you still have the original install CD I could use the contents of the disk.id file that is found in the root directory of the CD (it can be opened with notepad). I need to determine this so I can see if we have drivers online for this card, or if your original install CD would be the best driver package for it.
Jeremy

"the" DVD-Audio prob

Hi, I'm having the same problems with playing dvd-audio as others have experienced, the greyed out play button, recognized tracks and durations but no progres in the creative player and windvd, powerdvd plays stereo only. I st noticed this after updating to the newest drivers. I've tryed re-installing everything in every way but had no luck. Has anybody came up with a solution to this yet? I have an audigy 2 zs on a windows xp sp2Message Edited by oneofakind on 2-02-200605:47 PM

Hi pmhs teacher:
Welcome to discussions!
If the audio is out of sync on the DVD, do this:
http://www.danslagle.com/mac/iMovie/audio/1001.shtml
If the audio from another movie is playing on the DVD, then do this:
When I burn a DVD, the audio that was used in my slideshow, and played correctly in 'Preview' isn't the audio that plays on the completed DVD. What am I doing wrong?
http://www.kentidwell.com/idvd4/#faq_26
Sue
iMac G5 1.25GB 20FP & iMac G4 800MB 17FP Mac OS X (10.3.9) Superdrives & 1 G RAM all around

KM2M Combo no onboard audio prob. resolved

I've finally got the audio to work. As you said, Just had to search for the correct audio driver (Realtek AC'97 in the sound folder) from the cd. Ran setup from there and the install wizard took care of the rest. Still find it strange that the cd won't startup automatically when inserted, which caused all this hassle. Nonetheless, audio's cranking now ! Thanks again for pointing me in the right direction !!!!!!

Had the exact same problem with the km2m and win 98. Nothing but grief from the realtek site and the driver CD that came with the mobo. What you need is a 98 specific driver that realtek has available but don't list in their search menus.
The solution for win 98 is to go to this url: http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
Ignore the downloads in the menu, as they offer nothing but the win 98SE driver that is on the driver CD (wdm_a357a.exe) and which doesn't work. On the left side of the screen is a "downloads search" box. Type in wdm_a354a.exe and hit enter. Your download of the proper win 98 driver should start right up.
Once you have wdm_a354a.exe, go to control panel and uninstall all sound devices under the device manager, then run wdm_a354a.exe. Should have you running sound after a reboot
Bit late to help the original poster, but the info may save someone else a headache or two LOL
Tiger

CQ56 audio probs

my 3 week old cq56 suddenly all sound sounds like its on helium any ideas skype was a laugh for a while now not so.

Okay, slight qualification to the above joy ... occasionally it'll lose internal Wave playback, and you'll have to restart it. But that sounds like some driver issue that M Audio haven't quite sorted for XP yet
But when it's good, it's very very good - I can even enable the C Media sound, set that as default in Windows as 4-channel, then take the SPDIF out from the C Media card into the SPDIF in on the Audiophile, giving me ultra-high quality for the front left and right speakers, and take the surround L and R from the S-bracket output for the rears! Not that I've got any rears - yet! - but that's not the point, getting both soundcards to cooperate is a real winner! And it worked first time!
Eee, technology, it's great when it works

Zen Micro audio prob

My Zen Micro has poor sound quality, you can barely hear the vocals and everything else has a watery sound. I know its not the headphones because I checked them on my cd player and they worked just fine, and when I put in a different set of head phones into my Zen Micro it still had the audio problems. Has anyone else encountered these problems? If so, what is the problem and the best way to fix it's

I have the same problem and it seems to be caused by the headphone jack. If I adjust the headphone plug by turning it or holding it in the jack, I get normal sound. If the headphone plug shifts, I get the weird sound you're describing. It happens no matter which headphones or speakers I use, so I think I have confirmed it's the jack on the player itself.

Is anyone else having audio probs with iPhone 5?

While using the iPhone 5 the audio goes in and out....sometimes louder/quieter, sometimes it feels like I'm listening through a shell, sometimes it sounds like the call has been dropped and there is absolute silence. Anyone else experiencing this?

I, too, am having this problem and wonder if it is a defect. A co-worker with the I-phone 5 does not seem to have the same problem.

SB CT4810 audio prob

Similar Messages

Maybe you are looking for