SB Extigy - Only getting sound from my headphone j

Hi
I no longer have anything coming from the regular analog and digital outs. Just the headphone jack works. There is no light from the S/PDIF.
any thought?
cheers
Norman

Do you mean that there is no light from the Optical SPDIF out port? Sounds like it's faulty though. Try do this test.
Disconnect the Extigy from the USB connector on your computer. Connect the Line-In jack on the Sound Blaster Extigy to the Line-Out jack of another audio device, such as a MP3 Player. Play the music and verify that the Extigy functioning correctly.
Jason

Similar Messages

  • I only get sound from the computer's speakers even though I put in headphones

    I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
    I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • IPod touch audio issue: why do I only get sound from one channel in my ear-pods?

    After upgrading my brand new iPod touch 5th generation to IOS 6.1.2 I only get sound from the right channel of my ear-pods.
    I did not have this issue with IOS 6.1.1. Is this a problem derived from new IOS? Any idea on how to solve it?
    Appreciate your help!

    Have you tried other headphones? If you confirmned it is an iPod problem:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • HT201401 Only hearing sound from one headphone?

    I only receive sound through one headphone, but have tried different headphones and the same problem exists. Any ideas on fixing the problem?

    (Found this by another user)
    "You simply need a replacement headphone jack. The problem is one of the contacts in your headphone jack (the metal that touches the plug on your headphones) got bent/damaged/etc. Replacing the headphone jack should do the trick.
    You can probably get it sent somewhere for servicing as well. You also have various options of trading it in or selling it, etc.

  • Only getting sound from the left earphone

    I changed headphones to make sure its not a headphone problem but there is no sound from the right earphone. If I press the connector deeper into the socket then both the earphones work fine, however, I have to keep it pressed down with my finger. Does not work of its own accord. I have had it for 13 months now...any tips anyone?

    I have had a the same problem, only its my left headphone that doesnt seem to work.
    I've tried using dozens of headphones and speakers but the left speaker or headphone never works.
    I have found a cheecky way of getting some sound through however. If you push the ipod jack up at an angle to the roof of the ipod jack hole then you should find that it works. Just press down on the ipod jack (nib bit close to the speaker hole).
    Only problem with this is that you have to hold the ipod to listen to it and it can become quite tiresome. As soon as you let go it will stop sound going through that speaker.
    I did also find out that this happens to quite a few people and most commonly is caused when dirt (e.g. sand) gets into the ipod jack hole.

  • Dell OptiPlex 3020: I only get sound from the internal speakers

    I have a brand new Dell OptiPlex 3020 running Windows 8.1. I am able to hear through the internal speakers, but I cannot get external speakers or headphones to work - I've tried both the jacks on the front and back.
    The microphone on my headset works correctly, but I still hear only through the internal speakers.
    Advice?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • TS2771 only getting sound from one side of the headset.  Any fixes available?

    I have an used Ipod touch.  When i connect a headset, i only sound from one channel.  Any fixes out there?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Only Getting Sound From Left Speaker/Earbud

    I don't know what's wrong with my Nano, but I've tried the R's and they aren't working.
    Basically, there's no sound coming from one of my speakers/earbuds. At first, I thought it was a problem with my earbuds, so I got new ones, and it still didn't work. And then I tried plugging my IPod into my portable speakers, and only one speaker works. I really don't understand. Help Please?

    That is very interesting.... I have 2 ideas (meaning they probably will not work but try them anyway)of how you can get the sound correct.
    1. try putting sound check on ( if it is on, then put it on then off. if that doesn't work, go to step 2...
    2. try restoring the ipod(*MAKE SURE YOU CAN GET THE SONGS BACK EASILY BECAUSE THIS MAY NOT WORK, IT'S JUST AN IDEA!*)
    Good Luck!

  • Im trying to record but im only getting sound in one headphone so it only plays in one speaker how do I record in both speakers

    Im having problems recording

    Make sure your tracks are mono. Then try again and let us know. Or if you are sure you need a stereo track, make sure there are information both on the left and right channel. Also check your pan settings.

  • Why I only get sound from 1 channel when I connect an earphone or satelite speakers?

    HP Paviliong7-1150 notebook, OS Windows 7 premium 64-bit

    Hi frankgonzalez,
    Take a look at this document and follow the troubleshooting steps.  Please let me know if this helps to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Can't get sound from Insignia BT headphones w/ BT-equipped dv3t

    Both are brand-new, I charged the headphones and downloaded the updated drivers from www.broadcom.com (actually Vista seemed to do it automatically) and the device is paired but I can't get any sound out of it (it's turned on:-)).
    Under the Playback tab in the Sound control panel there are three items:
    Speakers: Bluetooth Hands-free Audio
    Speakers and Headphones: IDT High Definition Audio CODEC
    Independent Headphones: IDT High Definition Audio CODEC
    All say they are working, but when I test the sound of each one I only get sound from the notebook speakers using the second option. The only weird thing I can think of is that I had the USB adapter plugged in when I downloaded the drivers, so maybe it downloaded drivers designed to work through USB? (I can't get sound with the adapter plugged in, though, either).
    Any suggestions welcome, I really want to get this to work and not have to send the headphones back to seller (which is what Insignia tech support told me to do).
    P.S. I know I have BT turned on because I'm also connected to a wireless home network, they go together.

    Hello again,
    oops, I must have missed your last message... sorry for that!
    I have to say, that I don t have my digital sound system that long, that I can answer this question for sure. However...
    You re right, that it should be possible, although I wasn t able to find a way to do that... yet... Somewhere (don t know if it was this forum or another place) I ve read, that the SPDIF support for Windows Vista isn t that nice at this time... perhaps a new driver will solve this
    Furthermore... I don t use the Media Center that much. So I don t even know if there is any option to set the output device (within the application Media Center). That would be important to realize "the best of both worlds". Explanation: If you want headphones support, you (always) have to leave the Speakers device as default. Other applications (such as Winamp,...) allow us to set the output device (in Winamp for example you can set it under the preferences Output -> Directsound device) to the SPDIF device, although we have selected "Speakers" as default in the control panel... nice, isn t it's For sure... if it would work...
    That way you don t get a(n) AC3/DTS signal via SPDIF... so, if you use Windows Vista (I can't answer your question related to other operating systems, because of my newly purchased system -> I haven t used it on XP) the only way that I know ( til now) is to select the SPDIF device as default...

  • How com I only get sound on my left earphone after updating to latest ios7

    As title says, suddenly I'm only getting sound from the left earpiece...

    Have you checked the balance slider?
    Settings --> General --> Accessibility. Scroll down and check the balance slider.

  • Audigy 1 PCI card, only have sound from right side speak

    hi guys and gals, I'm thinking my audigy has finally kicked the bucket as i only get sound from of the two side channels, its not a cable or speaker issue, and can find no loose connection or burn through on the card, anyone had this problem is there some simple fix or should i just buy a new card :P
    Cheers
    Raiden

    Wow, so after testing it in linux and not working, i thought to myself definitely something in the connections.
    So I look at the sub/rear/front connectors and decide to just disconnect and reconnect them. Surely, enough the rear connector on the soundcard wasn't in all the way hence the only rear speaker working.
    Well after spending a day on this and finding the very simple fix all i can say is DOH

  • Audigy 2 plat- cannot get sound from headphone output, only from rear pa

    I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

    Inertia22 wrote:
    I put in the Audigy 2 zs from my old PC into my new one and I cant get any sound from the Headphones or Mic.
    Only sound from the external speakers. Any help would be greatly appreciated.
    If you getting sound from the external speakers....are we talking the ones on the laptop?
    Means you still have the onboard sound turned on at a guess.

  • HT204291 Can only get sound on AirPlay from sky go no picture

    I can only get sound on skygo from iphone5 in AirPlay

    Hi sallywinddancer,
    Welcome to the HP Support Forums.
    I see you are having sound issues when you hookup your tv to your notebook with an HDMI cable.
    I would be happy to help you. Firstly, a few more details about your notebook would be helpful, as there are many different versions of the HP 2000 Notebook. Please read the following documents, if you need help in finding your product/model number and OS version.
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Has your HDMI/TV connection ever had sound before, and if so were there any updates that could have affected it?
    Some general information that may be helpful for you:
    Connecting a Monitor, Projector or TV (Windows 8)
    Overview of HDMI and DVI Connections for PCs
    In the following link, please pay particular attention to the section on Troubleshooting TV setup as a second monitor.
    Using Two or More Monitors with One Computer (Windows 8)
    Other things that could help would be to insure that you have updated all the video and audio related drivers for your notebook. The drivers can normally be found from the product page for your notebook, or from the original chipset manufacturer. I would link that page to this, but I need the exact product/model number to get the right page for you.
    Another thing that could help with drivers is the:  HP Support Assistant as it can automate the driver updates for you.
    Please let me know if any of this information has been useful to you, or if you need any further help.
    Regards,
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • Data Recovery of data from laptop hard drives

    This hard drive is from a T60 laptop - please read below, thanks 1. Working laptop with a working hard Download drive ( I know this is the case as if you insert the drive into the laptop , power it on, it loads windows xp, you can use the laptop as p

  • Setting up SAX and Crimson

    Hello. Thanks in advance for any help or advice. I am trying to parse XML. I have done a bit of background reading and made a few attempts - but i am stuck. I would like to parse XML using Crimson. I would like to use SAX as the API to that parser (h

  • Need Help, URGENT PLEASE!!!

    Hello word! I have to deliver a project tomorow, and I<m experiencing a serious trouble! I've created all parts of my project on separate director projects. but when I try to integrate the "ALL" in one project, by importing exe files of the parts (of

  • How to delete self defined "Swatches"?

    I work with Adobe Design Std CS5 Illustrator (German version), newly installed - not migrated from an older model! - on iMac27, i7, SSD and OS X 10.8: German:  Ich habe viele eigene Farbpaletten (Farbfelder) unter "Benutzerdefiniert" gespeichert. Ich

  • FTP Transfer problem Vista

    Hi everybody. I'm using Adobe Dreamweaver CS3 since yesterday and everything is working fine. Except the transfer to the FTP server. It seems to work fine but when a file appears on the server the byte size goes after two seconds to zero. Does anyone