Sb Live! 24 bit - Creative support probl

I think that Creative do not remember about "NO X-fi" users. What do you think about this problem?
When you make a new driver for sb li've 24 bit's There are so many thigs to improve and repair.
It's completly unfair that when Creative make a new card, forget about last cards which maked. This is a very bad politic.

$I take you do know about MS pulling Direct Sound 3D out Vista on up
EAX or Direct Sound 3D version?is in Alchemy how ever you will need a Sound Blaster Audigy on up
http://www.creative.com/soundblaster/alchemy/

Similar Messages

Soundblaster 5.1 live 24 bit - Woofer+center probl

hi guys
i just bought a sound blaster li've 24 bit sound card, and i can`t make it sound good on my Philips 5. sound system
the problem i have is with the woofer, i mean i can`t controll the sound that comes out of it at all
and it is not linked with the "center" like it should be
my wofer sound goes up or down when i turn my rear or front up or down
also my center sound very very very low compared to the front and rear
i`m pretty sure the problem is not with my Philips 5. system cuz i had a diffrent sound card before and it worked very good
please help me in any way ... this is very frustrating

i know that my wofer is not linked with my center, cuz when i pull out the black and green jacks and leave only the orange jack in, i can only hear low sound from my center and nothing from the wofer
also like i said the "subwofer" volume slide has absolutely no effect

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install a

When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install apps?

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Typically, How many back and forths with Creative Support before they acknowledge your questi

Typically, how many times does one have to go back and forth with Creative Support before they acknowledge an issue or question?
This is ridiculous.
I'm on the forth reply now.
All I want to know is if there is a?64-bit ASIO driver for the X-Fi Titanium on 64-bit Vista?
They will not answer me.
All of my testing indicates that there is not a 64-bit ASIO driver for Vista, but they will not confirm or deny.
:angry:

dRe: Typically, How many back and forths with Creative Support before they acknowledge your question?U I don't know what Creative would have written if you asked SUpport these days?
I assume, they lied when they wrote this. There are several walkarounds for XFI cards
with beta drivers. In releas drivers they exclude the ASIOx64, but in beta it's included!
Creative has a very awkward marketing strategy. This was with Vista not having EAX on Audigy as
the said it is impossible. The newer X-FI was able to?do it and after a few weeks the Audigy also could-
after paying for it. The same with DolbyDigital Li've... and now with x64 ASIO. They reduce features
in cases the cheaper card had same possibilities as the more expensi've EMUs...
Shame on them. I?baught a creative Card for the 4th time (SB, SB AWE32,Audigy2, and now Titanium).
I'm going to thinking about selling it...

Traktor 3.3 & SB Live 24-bit External in Windows Vista, Problem sol

Hi!, I'm from Mexico, I'm a dj, ok, few hours ago, I solved the poblem with my SB Li've External in Traktor 3.3 of NI, I use Windows vista in my tablet PC, and when I boutght it, Traktor never show me the 5. channels... I think the problem is with the driver for windows vista, one week ago I recovered my tablet and I install Windows XP, but my AMD Turion 64X2 runs bad the traktor 3.3, today I decided to install my SB Li've in W. Vista, again, And?I decided USE THE XP DRIVER CD, I had't installed any software of music in my PC, only the traktor 3.3, when I?trying to set the Audio COnfiguration in traktor I find one?option in Audio Device: ASIO4ALL v2,?and others options.the most unusual is that de option ASIO4ALL had't show me before. ok but this option allows us to use 8 outs of the SB Li've , & 2 for?front, ....etc. the last 2 outs (7 and 8), I thing that?are for the Digital Output(please confirm me it). I don't know how my?PC detected that option in traktor, I had another SB Li've External, & make the same steps & never show me that. my?NEW SB Li've Ext. I boutght it'stoday, I don't see any?unlike. Fortunately for me?traktor & SB LIVE Ext. runs great in Windows Vista. . maybe the XP Driver CD is new, I don't know! (for these news steps I never install the VISTS Driver CD).
When you configure Ur traktor Outputs, select ASIO4ALL and push the Control Panel button, Traktor will run another windows with many options.
I use this options in my PC (if U recommend me other please tell me):
Audio Device: ASIO4ALL
Sample Rate: 4400 hz
Audio Latency: 23.ms (configured in ASIO4ALL control panel)
------in ASIO4ALL control panel:
.-Select SB LIVE 24-bit Ext. and clic on enable button. if there are other please disable it.
2.- mark Always Resample at 44. Khz <-> 48 Khz, and force WDM Driver to 6 bit (optional)
?clic on exit.
go to output routing, and U will find the 8 outputs.
Note: in ASIO4ALL control panel I see a web page for support, cheak it: www.asio4all.com, maybe U will find more options.
I hope this hel
ps.
with my first SB LIve I visit this forum and many people have the same problem. . good Luck! and happy Mixes.
for questions please contact me:
[url=mailto:[email protected]">mortal_csw@hotm ail.com[/url]
www.trancemx.com
And Sorry for my bad english jaja. BYE!

ok, in output routing you will find all options to configure your outputs, for the cue?monitors select 2 outputs of the SB Li've, in my setup I have?3 &?4 outputs (C/Sub estereo output), for master I have & 2 (Front), & for Booth 5 & 6 (Rear). maybe your problem is that you have not?deactivated your old sound card, and haven't enable the SB Li've, U can use both at the same time, and get more outputs . U can configure Ur outputs?as U Like, if U use a external Mixer with 2 or 4 channels, select in output routing - mixer mode "External" and send the channels A, B, C & D in a specific?output. good Luck

Creative Support. What R U Doing About The Firmware Update Iss

This post is primarily aimed at Creative Support.
Like many other out there that have a Zen player, i recently decided to upgrade my 40Gb Zen Touch's firmware from .0.03 to the latest PlayforSure version 2..0.
This is what i did on my Dell p.c.
) Upgraded my Win Media Player from version 9 to 0.
2) Backed up all my mp3 data to the HDD.
3) Erased all of the mp3 data from the player.
4) Connected the player to my p.c via USB ( 2.0 ).
5) Ran the firmware update, and selected to proceed with the upgrade.
During this process it warned me that the player may reboot a number of times during the 5min upgrade. The player rebooted twice, but on the 2nd time the update software couldn't initialize the player. I left this for about 5mins, to no joy.
I stopped the update via the close button and disconnected my player. When rebooted this shows the error "Firmware Problem" and proceed's to the Recovery Mode screen.
If i choose the "Reload Firmware" option this proceeds to Erase the firmware and then states "Start firmware update now". Even though the firmware software is on my desktop and the player connected to the p.c it fails to reload the firmware.
Now.... On my p.c, if i go into "My Computer", the player is clearly linked and present as an other linked device. However if i run the firmware update software from the desktop it say's "Your player is not connected, please connect your player".
This is a contradiction since the fact that my computer successfully detects the connected player and Media Player 0 also recognises that it is connected.
Like many other's out there we have paid good money for your products and expect a bit of commitment back to resolve these issues. For now i have player that might as well be a book-end.
Questions to Creative Support:
) Are you fully aware of the amount Zen owners experiencing this problem?
2) Are you working on a fix for this update problem?
3) If yes to question 2, when are we likely to see the results of this?
Regards

Wish I had seen this thread before attempting to update my firmware to the SurePlay version.
This is what I did.
I downloaded the Firmware, downloaded the extra software and download Windows Media 0.
I ran the firmware update and connected my player to the computer, no problems.
It said the player would reboot several times and on the 2nd or 3rd, it would no longer connect my device. It would tell me that there were no drivers for the device.
I tried re-booting the player several times, as it will now only boot into recovery.
I have re-installed the drivers, I have even re-verted back to the original drivers from the CD, but it now will not even connect. If I can't connect the device, I can't put any firmware on the Zen, which means I can't use it at all now.
I have been through the knowledge base, but even narrowing down my search to only Zen Touch players, I get several pages of irrelevant information.
I have e-mailed Creative and will see what response I get and I have also posted on another forum.
There must be someone out there that can help sort this, it was an excellent present to me and now its not working
Thanks
Bubs

Integrated SB Live 24 bit on K8N Neo4 SLI Plat and custom EAX

I want to be able to create some custom EAX settings but I can't seem to find any way to do that on the SB Live 24 bit that's integrated on the K8N Neo4 SLI Plat board. Is anyone able to do this or is it a limitation of the integrated SB Live 24 bit? I hope it's not the latter... Thanks.

Hello, uninstall your sound drivers and go to creative site and get the lastest drivers with creative sound console, install both this sould work.. also clean out all the old sound drivers after uninstalling with driver cleaner. I think thats how i did it. good luck henry9

Creative Support =

I m about to tell a story about how bad Creative support is. First I email them. I ahve to send what year I bought my card. I put a random date cause I'm to lazy to look for the invoice. I theng et a email a couple days later saying they won't help because my card is to old. I then email them again but saying I bought the card within a month. They then email me back a couple days later again giving me a couple obvious things to look up that had nothing to do with my problem. Then I reply back giving so much detail into my problem that a 5 year old would understand it fully. Then I get a reply a couple days later and it links me to download the latest drivers. OMG I ALREADY HAVE THE LATEST DRIVERS. If Creative wants to call it sound cards for gamers then they should fix a major problem for the most success online action game of all time Counter-Strike. What I've been wanting all this time is for them to code a locking tool into the surrond mixer so you could choose to lock the voice to only mic. I jsut though of a slogan for Creative "We are Creative and think of Creative-vly bad responses to your support emails. "When writing your message, remember to keep the language clean." - Like thats gonna happen when people have to go through this horrid support.Message Edited by defi on 07-25-2006 08:07 AM

Did you try what they listed in FAQ\support section at steam? Anyway here's a link to the very first thing I found when doing a search for "Mic"
Problem: Microphone input switches when launching a game<IMG height=6 alt="" src="http://support.steampowered.com/rnt/rnw/img/trnsp.gif" width=> Question
I have all the recording settings for my mixer and select Line /Mic, and it works before I play a game, but whenever I start CS it sets the recording device to Wave Out Mix, instead of Line /Mic. As a result the game engine is binding it's mic input to the wrong source on the sound card.
I can alt-tab out of the game and set it back to Line /Mic then it works for the test in the options menu, but when I join a Server it puts it the mic back to Wave Out Mix again so my mic won't work.
How do I fix this?
<IMG height=6 alt="" src="http://support.steampowered.com/rnt/rnw/img/trnsp.gif" width=> Answer
Other software applications like CD Recording programs can change the wavein input to come from the CD player instead of from the microphone, then when players try and use their microphone in the game it won't work.
To solve this, the HL engine tries to make sure the mixer control settings are set properly when the game runs, but not all soundcards work the same way, especially very high-end sound cards like Audigy 2ZS pro cards.
To prevent the HL engine from trying to set the mic input, players need to set this CVAR in their userconfig.cfg file or in the launch properties of the game.
Add this line in userconfig.cfg:
voice_forcemicrecord 0
or in the launch properties for each game you play:
+voice_forcemicrecord 0
(you don't need both)
This will prevent the engine from attempting to configure the mixer settings.
You might also check and make sure these settings are correct:voice_enable ""sv_voiceenable ""voice_scale "0.75"voice_enable ""voice_modenable ""voice_dsound ""voice_modenable ""
Message Edited by bratboy on 07-25-20062:49 PM
Message Edited by bratboy on 07-25-2006 2:50 PM

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PM

No, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine.

How do i get a live chat with apple support with no phone

My phone is dead, how do I get to have a live chat with apple support online?

You'll need to contact Apple support.
Go to:
http://www.apple.com/support/contact/
and Navigate through the options.
Eventually you 'll find you can setup a call to a landline if you wish, or get a chat session if a support person is available.

I am done with Creative support is terrible

Is it me, or does Creative support suck? I have a Zen 6GB purchased in Jan 08, with a two year protection plan. I have been communicating with Creative Support because my battery goes from fully charged to dead after about 5 days of no use. If I use it, it goes from full to half charge within the first hour or two.
I contacted support to find the procedure for getting the battery replaced. I would have thought that since Creative went to a non user-replaceable battery that there would be a way to obtain the procedure, but so far I have been back and forth with support multiple times and still have no knowledge of how to get the battery replaced (I was even willing to pay).
As of the latest response from Creative support (who obviously did not read my request) I am to try charging it fully or pressing reset during charging.
Personally, I think the replies are canned responses based on keywords and generated without a support person involved.
Never again do I buy a product where I cannot change my own battery. As of now, I continue to use my Zen either plugged in to an A/C adapter or a Car Adapter,? I cannot use it on an airplane or anyplace where I must rely on the battery.
Message Edited by philakid on 07-03-2009 06:03 PM

Is it me, or does Creative support suck? I have a Zen 6GB purchased in Jan 08, with a two year protection plan. I have been communicating with Creative Support because my battery goes from fully charged to dead after about 5 days of no use. If I use it, it goes from full to half charge within the first hour or two.
I contacted support to find the procedure for getting the battery replaced. I would have thought that since Creative went to a non user-replaceable battery that there would be a way to obtain the procedure, but so far I have been back and forth with support multiple times and still have no knowledge of how to get the battery replaced (I was even willing to pay).
As of the latest response from Creative support (who obviously did not read my request) I am to try charging it fully or pressing reset during charging.
Personally, I think the replies are canned responses based on keywords and generated without a support person involved.
Never again do I buy a product where I cannot change my own battery. As of now, I continue to use my Zen either plugged in to an A/C adapter or a Car Adapter,? I cannot use it on an airplane or anyplace where I must rely on the battery.
Message Edited by philakid on 07-03-2009 06:03 PM

Windows Server 2008 Standard 64 bit edt support Hyper-v replication

Dear Team.
Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
If my primary physical server down so my secondary server act as primary server.

Hi,
Windows Server 2008 Hyper-V do not Support Hyper-V replica.
This is a new Feature in Hyper-V for Windows Server 2012.
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
Regards
Sebastian

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

HT1846 which edition of windows 32 or 64 bit are supported by macbook pro late 2011

which edition of windows (32 or 64 bit) are supported by macbook pro late 2011

I would go so far as to say there is no reason or need for there to even be 32-bit version.
64-bit has better memory and graphic handling with whatever you have.
http://www.amazon.com/s/ref=nb_sb_ss_c_1_16?url=search-alias%3Dsoftware&field-ke ywords=windows+7+system+builder&sprefix=windows+7+system%2Caps%2C201

Sb Live! 24 bit - Creative support probl

Similar Messages

Maybe you are looking for