SB Live! 24-bit: mic turn off when starting to pl

Here is my problem:
When I'm talking with Teamspeak and start to play Call of Duty 2, my mic shuts down. Meaning the REC bar goes down. So after I have opened the game, I have to go back to windows and put from the mixer REC bar up again so that others can hear me.
The part which annoying is that I can speak for quite a long time, until I notice that no one is answering to me, then I remember that the mic is off
So if anyone has a good idea how to keep the REC bar always up, let me know. I have a friend who has the same card and same problem.
And my headset is creative HS-600 (no usb).
Thanx,
Late

Latebalazoo wrote:
COME ON! ANYONE?
I THINK I WILL NEXT TIME BUY SOMETHING ELSE THAN CREATIVE!!!
Go ahead then.
It's obvious that either your teamspeak or COD have problem and not because of the soundcard so if you think it's something to do with the soundcard then gd luck to you.

Similar Messages

W500 WAN radio turns off when starting/waking up

I'm getting a bit frustrated about the fact that my WAN disables itself when I wake or start up my laptop (I wan't it to be on, allways). I've checked my setting but I must be doing something wrong. The strange thing is that the WAN indicator light is on, it blinks and it goes off again. My solution is to manually turn on the radio once again (Fn F5). Is there a way to disable the automatic wradio shutdown?
Thanks in advance,
Lenovo W500: NRB3VNI, T9800, 4GB, 320GB 7200rpm, 9cell, VBE

If you want help, you need to provide some details.
Can you see the fan thru the ports on the bottom? I've got a dv2000 here and I can see a part of the fan.
If you can see any part of it, either grab a headlamp or position yourself under a strong table lamp. Place your finger on the Start button, flip the laptop over, push Start, tell us what happens.
If the fan doesn't even try to move, I'd guess the next thing to do would be to find disassembly instructions (HP seems to be pretty good at providing clear instructions) and either print them out or have them displayed on another PC. Get in there and find out what's going on. With any luck at all the tiny plug where the fan connects to the motherboard came loose. Or maybe a wire broke. Hopefully it's something simple, and not a dead fan.

IMac Turns Off when start using DVD Drive

I first noted this problem when I try to install windows and thought that was a boot camp problem: every time it start the instalation then shutdown (no warning, it seens like it was unplugged). I tried Vista DVD and Windows XP CD (both original medias already tested in a PC).
Then a noted that the problem occours when the iMac try to use the DVD drive. It's not related with the media, sometimes it happens and sometimes it does not with different CDs/DVDs and softwares (iDVD, Finder).
Any help?
P.S. Sorry for my english.

oooohh well that fixed up my DVD burning issue
UDMA 2 =~ 33 m/b sec?
16x DVD = ~ 25mb sec?
If the above numbers are correct then that should be fine as a band aid fix for my DVD burning issues
Thanks a load!
Your sir are a gentleman!
Also since my last post I found that I supposedly wasn't running the latest BIOS...
I flashed from 1.6 to 1.11 which is listed as the newest here:
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=252
But I installed MSI Live Update 3 (I've never used it before) and it said there was a "1.B" BIOS... so I let it re-flash to that one...
I'll try out my USB printer again once this DVD finishes burning

Horizontal spry menu style appears turned off when on the internet though can view it in live mode!?

The style of the horizontal spry menu seems as to have been turned off when on the web though is visible and functioning on CS4 Dreamweaver design and live views. I have styled the spry menu and can view it in the properties section though the style setting is there on the internet it looks as if the styles have turned off and appears unformatted vertically when it should be a cascading horizontal menu bar. Not sure where the error is, I have looked at the coding and as I'm not the most experienced with spry.....
this is the coding above the head.
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript">
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />

</script>
I have noticed that SpryMenuBarHorizontal.css doesn't appear in the spry assets folder, does this matter? (not sure how to insert into the assets menu). Any help would be greatly appreciated!

thanks for testing it. I'm not sure how to proceed though as the css file is in my local_sites/spry assets folder for the website. I've tried to point it to other (copies of SpryMenuBarHorizontal.css) and spry assets folder externally from the site and again internally in the root folder and seems to make little or no difference.
Your suggestion of what it should read,(sorry to sound so naive at all this) though would you mind giving a step-by-step guide on how to go about it? as I'm obviously missing something in the setup process.
thanks again for your help.

Screen not turning off when closing the lid

I have Windows 7 64-bit installed on my MacBook Air 13.3" as the only OS.
Everything is working great with the bootcamp drivers except that when I close the lid the screen does not turn off. I don't want to turn off the notebook but only want the screen to turn off when the lid is down. I have looked a lot for a solution and am not able to find anything which can solve this problem.
There is nothing in the power options that can be done. Bootcamp is supposed to recognize this by itself, but unfortunately it doesn't.
Does anyone know a work around for this?
Thank you

That is correct. I have noticed the same thing. Windows 7 gives better battery life on MacBook Air then Mac OSX.
I went to talk to a Genius about this, pretty useless, told me to wait for an update. It has been half a year but no update yet. This is the only problem with the Bootcamp drivers I have experienced. I have managed to live with it, but is still pretty annoying. I always once in a while think about finding a way to fix it, but there is nothing that can fix this problem. Unless someone at Apple sees and listens to what is going on in the online fourms and fix the problem.

My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen.

Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

Creative Zen ver1.21.01 - Screen doesn't always turn off when in lock m

The screen doesn't always turn off when we lock the player.
It's a random problem, maybe related to some screens only.
When playing songs, if we lock the player, the screen fades out a little bit and will turn off automatically after 2-3 seconds. But in some screens (try the System/Information by example), it always remains in faded-mode, even after more than 5 minutes.
Thanks.

It dit it again yesterday, when my album finished to play (in lock mode), I opened my case and discovered that the screen was still on.
Maybe something in the process of the playing makes the the screen turn on automatically. I usually?use playlists, maybe the screen turns on when the?play stop?
I know that's not a very important issue, but for me it's "buggy"!
I have my player since week and it froze 3-4 time, so yes I had the "chance" to use the wonderfull reset button!

Macbook works fine when plugged in, turns off when unplugged.

Hello all,
As stated my 2008 Unibody 13 inch, serial number W8******1AX turns on and works fine when it is connected to power.
When it is unplugged it instantly turns off and turns its fans on full until it depletes the battery (so it is obviously getting power.. just not where I want it)
Since the problem began I have tried two new batteries, neither of which had any different symptoms.
Before this, the computer had an intermittent life, it would turn off when it saw fit, which got progressively worse.
I have followed the guides to resetting the SMC but have had no luck
I have been running it without the battery (to save it charging and discharging for no reason) and sometimes when plugged in without a battery
the magsafe green indicator light goes from dim to bright.
With the battery installed it stays bright orange until it is charged and then switches to bright green.
(I have tried it with another charger, same symptoms)
Here is the Battery Read out;
Battery Information:
Model Information:
Serial Number:          ?00€›Æ⁄¬+9tt
Manufacturer:          GSA-1280
Device Name:          ASMB016
Pack Lot Code:          3230
PCB Lot Code:          30db
Firmware Version:          ddae
Hardware Revision:          dac2
Cell Revision:          2b39
Charge Information:
Charge Remaining (mAh):          4113
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          4200
Health Information:
Cycle Count:          1
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          379
Voltage (mV):          12275
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Automatic Restart on Power Loss:          No
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          2
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x00ebc719
Charging:          Yes
Power Events:
Repeating Events:
Type:          Wake or Power On
If this at all helps.
I'm at my wits end with this thing, I know it is getting on in age, but other then this, it has been flawless in its operation.
If anyone has any suggestions I would be happy to hear them.
Many thanks!!
<Edited By Host>

There may be a hardware cause behind the symptoms you cite, so a diagnostic
is recommended to see which parts are weak or failed in the computer. A visit to
an Apple Store with Genius bar may be helpful, as they can perform testing there.
A call ahead or use their web page, to schedule an appointment, is advised.
In the US and Canada, the Genius bar at a retail Apple Store can perform
a diagnostic service, for no fee, even on Apple products without AppleCare.
See links:
Apple - Concierge
Genius Bar - Apple Retail Store:
http://www.apple.com/retail/geniusbar/
List of Apple Stores, cities, countries:
http://www.apple.com/retail/storelist/
Also authorized Apple service providers who can test, repair and guarantee their
work should be able to handle an out-of-warranty older Mac, within age limits...
Ones too old for the Apple Store could be serviced at a Specialist, instead.
•Find Locations - Sales, Service, Training, Consulting:
https://locate.apple.com/
•Did you try resetting the System Management Controller?
Intel-based Macs: Resetting the System Management Controller (SMC)
•A reset of NVRAM may help with some issues:
About NVRAM and PRAM
•Calibrating is part of maintenance, esp with older portables:
Apple Portables: Calibrating your computer's battery for best performance
•The power adapter can be problematic and cause issues, so there's this:
Apple Portables: Troubleshooting MagSafe adapters
Also another item, other than keeping the magnetic connections clean of
debris, grime, and corrosion, is to check the MagSafe Board or have it
checked as part of a greater diagnostic. This board is behind the port
that supplies the computer and the battery with power from the adapter.
When it partially fails or if/when one of the connecting wires or plug fails
you can find odd issues or partial use. The battery may charge but it
may not be able to power the computer, and other odd effects.
https://www.ifixit.com/Device/MacBook
In older portable Macs, this was generally called a 'DC-in board' and as
such, you could read about it in an iFixit repair guide for the MacBook
model you have. These vary so the matching article is recommended to
see if that is something you may want to try. But I would have diagnostic
testing done and avoid additional damages from attempted DIY efforts.
There have been a few reports of other failure on the logic board that
contributes to a partial failure of the charging system, so about all this
may do is troubleshoot around the failure without finding an exact cause.
However it goes...
Good luck & happy computing!

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday. :(

My ipod 5 turn off when im listening to radio. It is brand new.... I bought it just yesterday.
. please help

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why won´t my display turn off when i call (iphone 4s ios 5.1)??

hi
i have a iphone 4s with ios 5.1
since i updated to 5.1 i have the problem that the display won´t turn off,
when i call with someone.
i have reset the iphone more than one time.
I don´t know what i can do more.
ps: sorry for my englisch

ach nee....
i have no protection on the iphone and i know the display turns only off when i hold it at my ear.
my problem IS that the display won´t turn off when i hold it at my ear.
This problem is since the update to 5.1!

How do I make my iPad turn off when the screen is covered?

My old iPad would turn off when I closed the cover but I cannot find how to make the iPad air turnoff in a similar fashion?

dpna wrote:
Yes it is a proper cover
If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
I'm going to quote from another post elsewhere ...
Are you using a genuine Apple cover or another third party cover?
It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
If you do have a genuine Apple cover then there is something going wrong here....

My Ipodkeeps turning off when i turn it on and it goseto the apple logo

Myapple i pod keeps turning off when im on it and it goseto the apple logo

What computer? What version of OSX is running? Some information other than my car won't start.

TS1398 my iphone turned off when using wifi

my iphone turned off when using wifi

That sounds like you have internal damage in the SIM card slot. Try taking the phone to an Apple store for evaluation. Make a genius bar appointment first at http://apple.com/retail.

SB Live! 24-bit: mic turn off when starting to pl

Similar Messages

Maybe you are looking for