SB live! 24 bit with xp sp3! problem!

Hi to all! Sorry abt my bad English)))
So here's my problem...
Put in my card in PCI, turn on my PC, "find new device", setup driver....everything is going well! In "Device Manager" card is on and work norm! BUT(!!!) is no sound out( and what is more interesting....when i play in my player music. they stop at 00:0....and nothing(((?
Download my driver from here?<a rel="nofollow" href="http://support.creative.com/downloads/?h=7"]http://support.creative.com/downloads/?h=7[/url]?the last version for sp...from 2007 year) but there only sp2, not sp3! Can it is mean smth?
What im must to do) please help)?

I'm not sure exactly how you're connecting things. You say you connected an optic out to a digital DIN on the receiver? These are totally different connectors.
The output on the card itself isn't optical. What you could use is a minijack to RCA (female) adapter, and then connect a standard RCA to RCA, male to male (SPDIF) cable to that, which plugs into the coaxial input on the receiver. Alternati'vely you could use a minijack to Digital DIN adapter and connect the DIN cable to that, and connect to the receiver.
Do you have the SBLi've 24-bit External? Do you mean you connected the optical output to the optical input on the receiver?
It may be best to contact Customer Support to speak to them one-on-one, to go over the connections and settings, if you're unsure of which to use.
Cat

Similar Messages

Traktor 3.3 & SB Live 24-bit External in Windows Vista, Problem sol

Hi!, I'm from Mexico, I'm a dj, ok, few hours ago, I solved the poblem with my SB Li've External in Traktor 3.3 of NI, I use Windows vista in my tablet PC, and when I boutght it, Traktor never show me the 5. channels... I think the problem is with the driver for windows vista, one week ago I recovered my tablet and I install Windows XP, but my AMD Turion 64X2 runs bad the traktor 3.3, today I decided to install my SB Li've in W. Vista, again, And?I decided USE THE XP DRIVER CD, I had't installed any software of music in my PC, only the traktor 3.3, when I?trying to set the Audio COnfiguration in traktor I find one?option in Audio Device: ASIO4ALL v2,?and others options.the most unusual is that de option ASIO4ALL had't show me before. ok but this option allows us to use 8 outs of the SB Li've , & 2 for?front, ....etc. the last 2 outs (7 and 8), I thing that?are for the Digital Output(please confirm me it). I don't know how my?PC detected that option in traktor, I had another SB Li've External, & make the same steps & never show me that. my?NEW SB Li've Ext. I boutght it'stoday, I don't see any?unlike. Fortunately for me?traktor & SB LIVE Ext. runs great in Windows Vista. . maybe the XP Driver CD is new, I don't know! (for these news steps I never install the VISTS Driver CD).
When you configure Ur traktor Outputs, select ASIO4ALL and push the Control Panel button, Traktor will run another windows with many options.
I use this options in my PC (if U recommend me other please tell me):
Audio Device: ASIO4ALL
Sample Rate: 4400 hz
Audio Latency: 23.ms (configured in ASIO4ALL control panel)
------in ASIO4ALL control panel:
.-Select SB LIVE 24-bit Ext. and clic on enable button. if there are other please disable it.
2.- mark Always Resample at 44. Khz <-> 48 Khz, and force WDM Driver to 6 bit (optional)
?clic on exit.
go to output routing, and U will find the 8 outputs.
Note: in ASIO4ALL control panel I see a web page for support, cheak it: www.asio4all.com, maybe U will find more options.
I hope this hel
ps.
with my first SB LIve I visit this forum and many people have the same problem. . good Luck! and happy Mixes.
for questions please contact me:
[url=mailto:[email protected]">mortal_csw@hotm ail.com[/url]
www.trancemx.com
And Sorry for my bad english jaja. BYE!

ok, in output routing you will find all options to configure your outputs, for the cue?monitors select 2 outputs of the SB Li've, in my setup I have?3 &?4 outputs (C/Sub estereo output), for master I have & 2 (Front), & for Booth 5 & 6 (Rear). maybe your problem is that you have not?deactivated your old sound card, and haven't enable the SB Li've, U can use both at the same time, and get more outputs . U can configure Ur outputs?as U Like, if U use a external Mixer with 2 or 4 channels, select in output routing - mixer mode "External" and send the channels A, B, C & D in a specific?output. good Luck

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Does anyone know if Appleworks 6.2(education version) will run on windows 7 64 bit? I have it running on 32 bit with no problem.

Does anyone know if Appleworks 6.2 (education version)will run on windows 7 64 bit? I have it running on 32 bit with no problem.

It runs fine on 64 bit. I have it running on Windows 8 Pro 64 bit. Just have Quicktime installed first otherwise the install will fail. Sorry for the late reply.

Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.

Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish instalárselo. What do I do?

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish apply. What do I do?

What is the version of Acrobat you are trying to install?
Response: Acrobat Pro 11.
Are you getting any error message?
Response: I am not allowed to install.
Acrobat can be installed in 64 bits machine.
Response: every attempt in the 64-bit computer I rejected all attempts.
2014-06-12 10:42 GMT-05:00 Anoop9178 <[email protected]>:
Install Acrobat Pro program, with 32-bit Lenovo computer without
problems. Try to install HP computer with 64 bits and rejects me. I wish
instalárselo. What do I do? created by Anoop9178
<https://forums.adobe.com/people/Anoop9178> in *Creating, Editing &
Exporting PDFs* - View the full discussion
<https://forums.adobe.com/message/6453389#6453389>

What is the best way to remotely access my sister in laws Mac who lives in another city to help her with her computer problems?

as stated above
What is the best way to remotely access my sister in laws Mac who lives in another city to help her with her computer problems?

The best way? Get her to bring it to you, especially if she makes good cakes.
Apples Back to my Mac isn't really suitable for this - it is designed for a single person who wants their Apple ID on the system. It would mean she would have to share hers with you & you would also have to setup her Apple ID on your Mac - it is messy & causes trouble with iCloud, iTunes etc.
You can try Messages if she is able to begin a session with you, see the 'invite to share screen' in the menus, weirdly you need to use a service that isn't from Apple.
Messages (Mavericks): Share your screen
It may be better if you to setup LogMeIn or GoToMyPC. They should 'dial out' & maintain a constant connection so you can login whenever the Mac is powered up. It won't, require a human to initiate the process at the other end, just be aware that the router may cause issues depending on what is configured, you may need settings to enable automatic port forwarding - it really depend on which option you choose.

Problems with Flash Player 11.8.800.94 in Windows 7 (32 bit) with IE 10

I have recently upgraded my Adobe Flash Player to version 11.8.800.94 but despite going through all the online trouble shooting I cannot get this to work. I am running Windows 7 (32 bit) with Internet Explorer 10. Any assistance would be appreciated - not too technical though please!

What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

PE 4 Installation with Windows SP3

Is there a known problem installing Premiere Elements 4 on a system with Windows SP3? I installed it fine on my laptop with SP2, but when I tried on my desktop running with SP3, got an error 1008 "The installation of E:\Premiere Elements\Adobe Premiere Elements 4.0.msi is not permitted due to an error in software restriction policy processing. The object cannot be trusted." Any info would be appreciated.
AJM

Art,
I have PE4 running on my laptop with XP-SP3 with no problems. What I do not remember is if I upgraded to SP-3 before the installation, but *think* that I did.
The only problems that I encountered were with CS2 Production Studio. I had to do a bit of cleanup and file copying to get Bridge to work, and then had to do a "repair install" for P-Pro and Encore, but all is working well.
Do not recall seeing an error 1008 before in these forums.
It *could* be that PE4 was written, so that it looked for things in SP-2, and now some file names are changed, in SP-3. Still, I belive that I did my PE4 install after SP-3.
Good luck, and maybe someone will weigh-in with exact details.
Hunt

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

Really bad banding and artifacts in 16-bit layered greyscale file. Bad banding is retained when converted to 8-bit with No flattening. Flatten 16-bit image and banding and artifacts disappear even with no dither or noise layer. Is this a known bug?

Has anyone else experienced this?
I thought it was a monitor problem at first, but I'm using a 10-bit per channel Eizo. It seems to be a Photoshop bug based on many layers interacting with each other. When I flatten everything is fine. But I need to work on this image with layers and decent fidelity. Interestingly when I convert to 8-bit without flattening (and utilising the dither function to potentially reduce banding even further), it uses the terrible artifact laden/banding to do the conversion even though when I zoom into 1:1 in my 16-bit document it looks fine. But 50% or 25% zoom I suddenly get these awful artifacts.
Here's some screenshots to clarify. Please note I've used Photoshop for 24 years so I'm no slouch but this is the first time I've seen this. The problem is I need to do some subtle airbrush and texture work on this and it's almost unusable unless I flatten (please note, it does the same in the original 8-bit file and just to say I Gaussian-Blurred every layer with a 30px radius after converting to 16-bit so the there's no longer any 8-bit information in there or reasons for banding/artifacts). I can only think it is some of bug in Photoshop's layering engine.
Has anyone seen this before - dealt with this before?
Thanks in advance.
Not sure these embedded images will work.
8% zoomed - see all the strange banding and triangular artifacts
<a href="http://imgur.com/izrGuia"><img src="http://i.imgur.com/izrGuia.png" title="source: imgur.com" /></a>
Flattened view - all smooth:
<a href="http://imgur.com/Pn35IAK"><img src="http://i.imgur.com/Pn35IAK.png" title="source: imgur.com" /></a>
50% zoom, still there:
<a href="http://imgur.com/Z207hFd"><img src="http://i.imgur.com/Z207hFd.png" title="source: imgur.com" /></a>
100% artifacts disappear:
<a href="http://imgur.com/6aGOz0V"><img src="http://i.imgur.com/6aGOz0V.png" title="source: imgur.com" /></a>
100% 16-bit layered
<a href="http://imgur.com/0XJfe5e"><img src="http://i.imgur.com/0XJfe5e.png" title="source: imgur.com" /></a>
and finally 8-bit layered converted from 16-bit with dither.
<a href="http://imgur.com/PSxiu43"><img src="http://i.imgur.com/PSxiu43.png" title="source: imgur.com" /></a>
help!

I can't speak to why, perhaps someone more knowledgeable than I can speak to that. But if it only happens at certain views then it's purely a display issue; it won't happen in print or when you downsample to display size. Such banding issues have always disappeared for me when I output to 8 bit.
I'd assume that it's because of your monitor; it can't display all the colors and when zoomed out there's too wide of a range in a small area so banding occurs. But that's just my guess.

P45 Platinum, Windows 7 Ultimate 64-bit, 8GB DDR2 PC8500 Problem

Anyone else experiencing this problem? or have a solution.
I tested Windows 7 Beta; I basically built a computer to test it.
Intel Quad Core P6600
MSI P45Platinum Motherboard Supports Max of 16BG & BIOS updated to current
4GB of Corsair (2 x 2GB) TWIN2X4096-8500C5DF (Native 1066MHz Overclocked DRAMS)
500 GB Western Digital SATAII
HIS HD 4850 512MB GDDR3 Video Card
No problem with Windows 7 Ultimate Beta 64-bit and Windows 7 Ultimate RC1 and finally Windows 7 Ultimate – Retail (RTM) 64-bit Boots in 15 seconds.
So I figure if 4 GB is great, then 8BG should be spectacular, So, I purchased an additional 4GB of Corsair (2 x 2GB) TWIN2X4096-8500C5DF memory and installed to fully populate my 4 dual channel slots.
To my dismay, my system boot time increased to 30 seconds and then the system became unstable and exhibited random crashes with all sort of page file and system errors.
I removed and swap the new 4GB memory for the old it boots and operates fine.
So then I thought maybe it was bad memory so I interchanged new 4GB for the existing 4GB and it worked fine. It seem to be an issue with installing more than 4GB.
I then searched the Internet for a solution and discovered this 8GB issue is a known problem with Windows 7 Ultimate 64-bit with no solution in sight. Some seem to think it is a hardware issue and other seem to think its an software issue with Windows 7 Ultimate – 64-bit.
I have seen some info indicating that installing 8GB of DDR22 PC-6400 doesn't have the problem.
Thanks in Advance
Calvin

The MB specifications state clearly that 1066 and above is OC only.
Quote
Overclocking
This mainboard is designed to support overclocking. However, please make
sure your components are able to tolerate such abnormal setting, while
doing overclocking. Any attempt to operate beyond product specifications is
not recommended. We do not guarantee the damages or risks caused
by inadequate operation or beyond product specifications.
That means its up the user to determine if they want to try/risk the OC condition. No stability is guaranteed. Every manual states that OC is not recommended and at your own risk, possibly voiding the guarantee. How much more should the manufacturers do in terms of stating what is regarded as OC and that its risky? All the P45 chipset boards with DDR2 state the same in terms of 1066 being an OC, no matter from which manufacturer.
Yes, with tweaking some are lucky to run at the OC speeds, but probably above the chipset, Ram and CPU recommended voltages. The more memory you add the more stress on the memory controller and subsequently an increased chance of instability, especially at the OC speeds.

How to dual boot window 8.1 64 bit with xp sp1?

Hello Hp PC Experts,
Sir i was bought HP 15-r119TU two week ago. So i face problem of dual boot with this HP note book. I need dual boot window 8.1 64 bit with XP SP1. Kindly help me at the earliest possible.

@mp56
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Nokia PC Suite running on Windows 7 (64 bit) with ...

Can you give us a date for when we will be able to sync our calendar and contacts from MS Outlook 2010 64 bit with PC Suite!?
OVI Suite support for this might be acceptable, but far from optimal as this program is pretty similar to using a 18 wheel monster truck to transport a pint of milk from the fridge to the dining-table..... somewhat bloated and way beyond what I need or want!
Please put some people on solving this issue, as it would indeed make more than one customer happy...and might indeed make for some new ones or make existing customers return...
borkrist

Thank you to all. Finally found an answer to what is going on here between laptop Vaio w/ Windows 7 64 bits and PC Suite, have not installed Ovi Suite, and will hold to do it until further news from Nokia.
Let me just tell you all my problem. It is as simple as not being able, once installed PC Suite v7, to have the connection with my E63. NO WAY JOSE, that PC Suite nor the computer, find the equipment. Get an error message stating that, no phone is connected.
I am sick and tired of this messages.
Agree with you on the fact that Nokia should do something to solve the problem with 64 bits, as most of the computers, laptops, nowadays come with 64bits.
I can see you get the connection but have some other problems.
If any of you can give me some hint what to do, will appreciate it.
Thank you in advance.
HC2DZ

SB live! 24 bit with xp sp3! problem!

Similar Messages

Maybe you are looking for