SB Live 24bit internal Line

Everytime I connect my TV to the Li've! 24-bit card Line-in I get a low rumble, like an electical one. Its only detectable when the volume of the speaker is moderate high+, But this doesn't happen when I connect it to my Hi-Fi.

Hey there jgcable if you are still checking out this thread I found the answer to the line input problem. At least for me and hopefully for you too. The answer I think was there all the time but with Vista moving things around I didn't find it until now and feel really stupid about it. If you have your level control down in the icon tray right click on it and choose playback devices.On 'Speakers' right click and choose properties.... Then go to the 'levels' tab and in there is the playback input slider for the line input. I knew that had to be in there somewhere and feel really silly for not finding it til now. With the older CL mixers it was all right there up front and easy to get to. If you don't have the icon in your tray just go to your control panel and then 'Hardware and Sound' and then 'Sound' again you will get to the same place for going to the properties for the speakers. I hope this helps you out,Wayne?

Similar Messages

I get 5.1 sound in test, but not while playing music?? Live 24bit internal

When I select the 5. setting in the control panel and run the test... the system plays the little bells through each speaker. But when I play music (with ANY PROGRAM) or play a game, I only get sound out of my two front speakers and my woofer. What's the problem? Anyone have a guess?shoot me an email if you must, [email protected] or add me to MSN [email protected] I would like to get this resolved if anyone has an idea.

welcome mate! You're another stolen customer... yeap, I can tell you what happend: creative sound cards NOT WORKS with VISTA, try another one NON CREATIVE, that the short answer...

Is there a way view the internal lines of perspective grid?

It would be very beneficial to view all of the internal lines of the sectioned rectangular prism that the perspective grid consists of. This is a standard workflow for drawing 3 dimensional objects. Without this, it is very difficult to draw accurately.
Essentially this but in perspective mode:
http://mathforum.org/workshops/sum98/participants/sanders/IsomGrid.html
This doesn't appear possible to in CS5. Please specify if this is not the case and if it is possible in CS6.

Do you mean doing this?
You have toi use the proxy to select the different planes and shift key if you are drawing to that plane but on the grid's base in this case the top of the cube.

Differences between live 24bit and audigy se?

hi!
anyone knows whats the exact differences between the creative soundblaster live 24bit (found in the k8n diamond and p4n diamond) and creative soundblaster audigy se (found in k8n diamond plus)? the chipsets seems to be identical among each other. the specs are also identical.
pls advise.

Quote from: alg7_munif on 29-July-06, 04:00:10
Why my device control on my K8N Diamond plus did not have the decoder tab?
Maybe that's why I can't get 5.1 sound from my digital speaker...
https://forum-en.msi.com/index.php?topic=99326.0
Looks like you don't have the right software drivers installed. Instead of the nVIDIA Audio drivers, you should be installing the Creative Labs drivers from the enclosed driver CD-ROM, the separate one from the MSI disk. Next go to Creatives site and run all the updates from their Auto-update service.
You should be able to select the tab shown above as I also see it. Each selection also works for me so I can say that the Dolby decoding does work.

SoundBlaster Live! 24bit & - defective line-in function

3 of my Li've! 24bit cards had their Line-IN function terminate after about an hour of use. ? Another card never had a working line-in function. The output is not affected. The operating system is WinXP SP3. Cards work flawlessly in output mode. I had never tried to use the line-in function before now.
I checked all connections & confirmed correct signal from my tape deck entering card. Everything works OK with on a computer utilizing another brand card.
The problem has occurred on PCs with different motherboards. Everything looks OK in the software.
I realize others have posted the same problem. I cannot find a posted solution. I would really like to find a fix or workaround. .
I STUMBLED UPON THIS SOLUTION:? THE ORIGIN OF THE PROBLEM IS THAT WIN XP SCRAMBLES THE LIVE!24 SOUNDCARD SETTINGS WHENEVER YOU REBOOT.
Go to the "Sounds and Audio Devices" section of Control Panel & click on the "Audio"? tab. Then change the recording settings from line-in to microphone. Next go to the "Playback" section & see that XP reset your settings & checked the mute box at line-in so? uncheck that box and the normal line-in function resumes? working. I don't know why this works but it has now worked on 3 different PCs including one with a Dell version of the Li've!24 card.You need to to this every time you reboot if you want to use the line-in function.
Message Edited by sellbuyologist on 06-23-2009 07:37 [email protected]

Yes, I have repeated it several times now. It doesn't make sense to me to check "microphone" when you really want line-in but it [email protected]

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

Help please no luck recording vinyl thru line-in port on External USB Soundblaster Live 24bit

Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.

hardingt2345 wrote:
Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.
Have you tried by installing www.asio4all.com drivers and then by using some?ASIO capable recording software as like Kristal, VSTHost, Reaper, etc (there are many others available)?jutapa

SB Live 24Bit External: Reproducible System Freeze after installing Windows Upda

I have a SB Li've! 24Bit External and am quite content with it. However, my Windows Update has recently installed the following updates:
- Cumulati've Security Update for IE, KB9282
- Cumulati've Security update for OE, KB9567
- Tool for Spyware Removal, KB890830
- Security Update for Windows XP, KB90853
- Security Update for Windows XP, KB9562
I suspect one of the last two ones to be at fault. Afterwards, my computer froze completely on the Windows startup screen whenever the SB came up. I could verify that it was the SB by removing the USB cable (which solved the issue) and plugging in again later to the running system (which brough the freeze again).
A was able to get a running system again by using the System Recovery, but I'd *really* like to install those updates (. to be a little more safe and 2. because the Windows Update nagging me about those updates is really annoying).

This has got to be the craziest IRQ table that I have ever seen. Windows will not let me change any of the settings. It doesn't seem kocher, and I am pretty knowlegible from other systems I have set up, but not this one. I have been keeping a few charts to see if anything changes, and these have changed since this morning, though nothing else has been installed. I know they shouldn't share as they do, but it won't let me have control over these. Am I am doing something drastically wrong. On USB is Epson 760, Logi cordless opticle mouse, and MS Internet KB with combo PS2 / USB 2 port hub. I have the mouse plugged into KB. HERE GOES:
IRQ 0 : Sys timer
IRQ 1 : Keyboard
IRQ 2 : Prog Interupt Controller
IRQ 3 : Com 2 (yet I have disabled in bios)
IRQ 4 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 4 : STD OPEN HCI USB HOST CONTROLLER
IRQ 5 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 5 : NVIDIA USB 2.0 ENHANCED USB CONTROLLER
IRQ 6 : FLOPPY
IRQ 7 : EPSON PRINTER PORT LPT1 (MY HP540 IS HERE)
IRQ 8 : SYS CMOS / RTC
IRQ 9 : SCI IRQ USED BY ACPI BIOS
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : NVIDIA NFORCE MCP NETWORK CONTROLLER
IRQ 10 : NVIDIA NFORCE PCI SYSTEM MANAGEMENT
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : SB LIVE
IRQ 11 : STD OPEN HCI USB HOST CONTROLLER
IRQ 12 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 12 : NVIDIA GF4 INTEGRATED GRAPHICS GPU
IRQ 13 : NUMERIC PROCESSOR
IRQ 14 : STD DUAL PCI IDE CONTROLLER
IRQ 14 : PRIMARY IDE CONTROLLER (SING FIFO)
IRQ 15 : STD DUAL PCI IDE CONTROLLER
IRQ 15 : SECONDARY IDE CONTROLLER (SING FIFO)

Live 24-bit ---- Line-In -- ignores custom suround

Computer HardwareHP Pavilion - PIII 500 - 384 ramLi've! 24-bit (internal)Inspire 5800 speakers
Non-Computer HardwareSony External DVD Player
My point in this project was to set up a surround sound system for my TV. To that point I bought RCA -> Stereo Mini plug and have my DVD plugged into the Line-in of the Li've! 24-bit sound card. After futzing about and finding the CMSS input I was able to get the rear channels enabled. My problem is that it Line-in seems to be ignoring the custom mix levels of the surround sound. Because of the proximity to the speaker while sitting on the couch, we set the Front(s) & Middle to 00% and the rear channels to ~45%. These settings are honored when playing MP3's, AVI's or DVD's from the computer; however, anything from the line-in ignores these custom percentages.
Am I missing something here or just mis-interpreting the way Line-in works. Is it driver related? Should I check the Drivers from the KXProject?
My current drivers are the "Creative Basic Audio Suite for Creative Sound Blaster audio devices" (35.59 MB) right off the downloads, dated 5 Jun 05. I never even tried the Driver CD that came with, I immediately upgraded to the newest.
Message Edited by nekron99 on 06-28-2005 2:47 AM

With the set up you are doing you will not get true sound sound. Currently you are only getting a stereo signal from your DVD player. Ifyou put it into the Line-In on the speakers the audio will only come outof the front speakers. If you plug the DVD player into the Li've 24 Bit's Line-In again you really only are send a stereo signal to the sound card. However will CMSS enable it will upmix the stereo signal out to the other speaker as what it thinks is the rear and center audio but it is just simulated so depending on how the audio tracks are cut inthe movie then it may not sound the same as a true 5. surround sound. Now one thing you want to check is in Speaker Settings make sure the card is set to 5. not 7.. If you have it set to 7. the CMSS may try to send some of the audio to the side speaker and since you have a 5. system you may lose some of the upmix.
Now if you would like true 5. from your DVD Player you could hook the 6channel analog outputs to the speakers. However most likely you have a newer one that does not have the 6 channel analog but it should have a digital output of some type. If it does all you will need is something that will decode the 5. digital signal. With this you will get your true 5. surround sound from your 5. encoded movies. There is 2 thing you can get to do this ether you can get one of our Audigy 2 ZS PlatinumKits. The front dri've bay has connection for digital optical and coax connections. Another option is if you are not able to exchange the cards is get our DDTS-00 Dolby Digital Decoder.
http://us.creative.com/products/prod...6&product=9468
I have one of these myself. This would connect between your sound card and the speakers. What you would then do is plug the DVD Player into the decoder box and it would decode the 5. signal and send it out to all your speaker with out you having to run the DVD Player to your computer. Also you can hook up your other audio devices to as well. This is what I use as the receiver in my living for my Entertainment Center. If you have any more questions let us know.

Live Captioning from Line 21 to onCaptionInfo with Live Media Encoder 3.2

We are a government broadcast facility charged with broadcasting live meetings via the internet. We need to upgrade our available video to provide Flash, but everything needs to be captioned. Our live captions are done via a caption encoder that embeds on Line 21. We currently are SD only and don't caption HD live. My research indicates that for closed captioning in a flash environment, the captions need to be embeded in the onCaptionInfo metadata. It appears that the Flash Media Server supports this, but I don't see any way to tell the Adobe software encoder to do this.
I'm currently testing with Brightcove as a CDN, and they do support onCaptionInfo in their player. If the data is present, a CC button will appear in their player. So far in my tests, I haven't been able to provide this metadata for the player to interpret. I've even tried shifting lines through a frame sync on the fly anywhere from -4 to +4 to no avail.
Am I missing something? Can the Adobe encoding software even do this? Does anyone know how to get Line 21 caption data passed to onCaptionInfo? I can see that line 21 is being passed through but apparently the flash players don't know what to do with it.
Thanks.

As far as i know onacptioninfo needs to enabled on the server as stated on the following link
http://help.adobe.com/en_US/adobemediaserver/devguide/WS5262178513756206232b27a91396cda04c 9-8000.html
I am not sure on how it works on live streaming but on VOD the closed captioned are embeded into mp4 with software such as captionmaker for adobe media server to stream it later on.
I believe i read that the closed caption are imputed via adobe media live encoder, but i am not sure about it....
I hope it helps and i would like to know how it gets done once you find out!

Live Trace: center line instead of outline?

In Streamline, in the conversion setup, I had the option of "center line" or "outline". Is there anyway to get "center line" in Live Trace or in another function. I am converting TIFF images to DXF for line drawing engravings in stone.
Thank you in advance.
Diane

Wade? Diane is talking about Live Trace. Did you mean she could alter the location of the stroke AFTER the trace?
Diane, I don't think this is precisely what you want. But depending on the nature of the source TIF, you might try selecting the stroke option and deselecting the fill option on the right side of the Live Trace dialog. Turn on Preview and then adjust: (1) the stroke weight setting; (2) the amount of blur applied to the source image (left side of dialog).
Sometimes this gets me a satisfactory line drawing, sometimes not. Again, depends on nature of the source image.

Using Live 24Bit With Vis

Hello there,I have SoundBlaster Li've! 24Bit with Inspire T7900 7. Speaker System. I upgraded to Windows Vista 32Bit, used the latest Creative Driver (Feb 2007)?and now I have sound and speakers test is working....but not in music playback and stuff... I was confused reading all the threads here, I know everybody has this problem... but is there a BETA driver or a way to make my 7. works again?cause reading the threads about the previous drivers confused me more!?thanx for help!

I was the same way. Of course my setup is not 7. but 5.also my speakers are not using a digital connection...and when i went into media centre i had zero sound and same with music playback till i went into the control panel/sound window and selected digital connection...which again i am not using but this seemed to fix everything sound wise... maybe they got it backwards..who knows. but i'm trying to find out if you can get the cmss or eax stuff back. this having no treble or bass or equalizer or anyhting but plain ole sound..well.. sucks. I mean I might as well be using my onboard motherboard sound..

SB live 24bit quest

i was wondering if there is a way for me to have my two speakers conected and my headset some how when i plug my headert into the other line outs it doesnt work any ideas?

omnio,
The easier way is to get a stereo splitter plug/adaptor so that your device can connect to the same output source.
Jason

SB Live 24bit reverts to 2 speaker m

Every time my computer is rebooted my SB Li've (Previous 5. and now 24bit) return to 2. speaker configuration. This is despite the fact that I have selected 5. or 4. in speaker selection. How do I get it to stick to 5. or 4. on reboot?
Running Win2000 Pro on SP4
On board Audio has been disable in Bios.
Thanks
Andrew

It seems after doing a search on this forum that this has been a problem for a while. It would be nice of Crati've to get this addressed.
It was not a problem in the older Mixer/Effects consoles so I am assuming this is a software related problem.
Anyone have any answers?
Thanks,
Andrew

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

SB Live 24bit internal Line

Similar Messages

Maybe you are looking for