SB live 24bit quest

i was wondering if there is a way for me to have my two speakers conected and my headset some how when i plug my headert into the other line outs it doesnt work any ideas?

omnio,
The easier way is to get a stereo splitter plug/adaptor so that your device can connect to the same output source.
Jason

Similar Messages

Differences between live 24bit and audigy se?

hi!
anyone knows whats the exact differences between the creative soundblaster live 24bit (found in the k8n diamond and p4n diamond) and creative soundblaster audigy se (found in k8n diamond plus)? the chipsets seems to be identical among each other. the specs are also identical.
pls advise.

Quote from: alg7_munif on 29-July-06, 04:00:10
Why my device control on my K8N Diamond plus did not have the decoder tab?
Maybe that's why I can't get 5.1 sound from my digital speaker...
https://forum-en.msi.com/index.php?topic=99326.0
Looks like you don't have the right software drivers installed. Instead of the nVIDIA Audio drivers, you should be installing the Creative Labs drivers from the enclosed driver CD-ROM, the separate one from the MSI disk. Next go to Creatives site and run all the updates from their Auto-update service.
You should be able to select the tab shown above as I also see it. Each selection also works for me so I can say that the Dolby decoding does work.

Live External 24bit Quest

Im considering buying this unit for the purposes of getting my music of my ADAT and onto my computer.
Does the line-in handle stereo signal?
Thanks, Conor

Yes.

SB Live 24Bit External: Reproducible System Freeze after installing Windows Upda

I have a SB Li've! 24Bit External and am quite content with it. However, my Windows Update has recently installed the following updates:
- Cumulati've Security Update for IE, KB9282
- Cumulati've Security update for OE, KB9567
- Tool for Spyware Removal, KB890830
- Security Update for Windows XP, KB90853
- Security Update for Windows XP, KB9562
I suspect one of the last two ones to be at fault. Afterwards, my computer froze completely on the Windows startup screen whenever the SB came up. I could verify that it was the SB by removing the USB cable (which solved the issue) and plugging in again later to the running system (which brough the freeze again).
A was able to get a running system again by using the System Recovery, but I'd *really* like to install those updates (. to be a little more safe and 2. because the Windows Update nagging me about those updates is really annoying).

This has got to be the craziest IRQ table that I have ever seen. Windows will not let me change any of the settings. It doesn't seem kocher, and I am pretty knowlegible from other systems I have set up, but not this one. I have been keeping a few charts to see if anything changes, and these have changed since this morning, though nothing else has been installed. I know they shouldn't share as they do, but it won't let me have control over these. Am I am doing something drastically wrong. On USB is Epson 760, Logi cordless opticle mouse, and MS Internet KB with combo PS2 / USB 2 port hub. I have the mouse plugged into KB. HERE GOES:
IRQ 0 : Sys timer
IRQ 1 : Keyboard
IRQ 2 : Prog Interupt Controller
IRQ 3 : Com 2 (yet I have disabled in bios)
IRQ 4 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 4 : STD OPEN HCI USB HOST CONTROLLER
IRQ 5 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 5 : NVIDIA USB 2.0 ENHANCED USB CONTROLLER
IRQ 6 : FLOPPY
IRQ 7 : EPSON PRINTER PORT LPT1 (MY HP540 IS HERE)
IRQ 8 : SYS CMOS / RTC
IRQ 9 : SCI IRQ USED BY ACPI BIOS
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : NVIDIA NFORCE MCP NETWORK CONTROLLER
IRQ 10 : NVIDIA NFORCE PCI SYSTEM MANAGEMENT
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : SB LIVE
IRQ 11 : STD OPEN HCI USB HOST CONTROLLER
IRQ 12 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 12 : NVIDIA GF4 INTEGRATED GRAPHICS GPU
IRQ 13 : NUMERIC PROCESSOR
IRQ 14 : STD DUAL PCI IDE CONTROLLER
IRQ 14 : PRIMARY IDE CONTROLLER (SING FIFO)
IRQ 15 : STD DUAL PCI IDE CONTROLLER
IRQ 15 : SECONDARY IDE CONTROLLER (SING FIFO)

Using Live 24Bit With Vis

Hello there,I have SoundBlaster Li've! 24Bit with Inspire T7900 7. Speaker System. I upgraded to Windows Vista 32Bit, used the latest Creative Driver (Feb 2007)?and now I have sound and speakers test is working....but not in music playback and stuff... I was confused reading all the threads here, I know everybody has this problem... but is there a BETA driver or a way to make my 7. works again?cause reading the threads about the previous drivers confused me more!?thanx for help!

I was the same way. Of course my setup is not 7. but 5.also my speakers are not using a digital connection...and when i went into media centre i had zero sound and same with music playback till i went into the control panel/sound window and selected digital connection...which again i am not using but this seemed to fix everything sound wise... maybe they got it backwards..who knows. but i'm trying to find out if you can get the cmss or eax stuff back. this having no treble or bass or equalizer or anyhting but plain ole sound..well.. sucks. I mean I might as well be using my onboard motherboard sound..

SB Live 24bit reverts to 2 speaker m

Every time my computer is rebooted my SB Li've (Previous 5. and now 24bit) return to 2. speaker configuration. This is despite the fact that I have selected 5. or 4. in speaker selection. How do I get it to stick to 5. or 4. on reboot?
Running Win2000 Pro on SP4
On board Audio has been disable in Bios.
Thanks
Andrew

It seems after doing a search on this forum that this has been a problem for a while. It would be nice of Crati've to get this addressed.
It was not a problem in the older Mixer/Effects consoles so I am assuming this is a software related problem.
Anyone have any answers?
Thanks,
Andrew

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

Sound Blaster Live 24bit External - No B

I am hoping that someone can help me here. I am running Windows Vista Ultimate and have my PC setup purely as a Media Center machine. It has an onboard Intel 5. Sound Card that was producing average sound, but works 00%?I have since installed my Li've 24bit External, I first ran the CD and then realised that it was not Vista software so I downloaded the updated drivers and software. First I removed the old software and then installed the newer version. Now everything seems to work and when I test all the speakers via the?drivers / control panel?they all work - including the sub. When playing anything via Media Center or Media player, I get no bass what so ever. - I have even tried 5. DTS DVDs?I have subsequently plugged the speakers back into the onboard card and the sub works. Any suggestions?Thanks in advance.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Genius SW-HF5.1... on Live 24bit and Audigy

Hi all,
I've tested this set of speakers on those two sound cards ans when I try listening to music or a DVD I still have no sound from both sub and middle speakers. I'd like to have some help please. I tried the same set on my onboard sound card and it works well (an Asus A8N-E Deluxe). I'd prefer my Audigy but it does not work even in BF1942. Tried to update drivers with no result.
Thx anyways guys.
Flussiger Engel
Message Edited by Flussiger-Engel on 01-31-2005 09:23 PM

Oppozith wrote:
My Question is: Li've 24bit or Audigy LS.
Yes I noticed that, but couldn't find any Audigy LS card.
Is it a discontinued model?
I found it priced about the same as Audigy 2 Value
(Audigy LS + Hitman 2 = ~66? vs Audigy 2 Value ~40?)
So why get LS?
For the game shake?
.jtpMessage Edited by jutapa on 03-2-2005 07:59 PM

SB Live 24bit.....need to run on 98se...is it possib

I use two seperate hard dri'ves....one is xp pro and the card works well...When I go install it my 98se dri've.... I don't have the needed drivers....any suggestions, Thanks

Baddog,
I'm afraid the minimum OS requirement for Li've!24bit is Windows ME.
Jason

SoundBlaster LIVE 24BIT.....Microphone ISSU

Alright, Alright...... I have Been playing United Offensi've for quite some time now with an Onboard Soundcard and i just got sick and tired of having to listen to my games through 2 pissant speakers.

I decided it was finally time to get myself something bigger, so i went to staples and purchased a Soundblaster Li've 24Bit Sound Card with a 5. Logitech Surround system, WORKS AMAZING......untill.........................


When i get onto the game or hop into my Voice Server, everytime i push my "Talk" button for my microphone they hear everything my comptuer is doing, wether it be from my AIM sounds, or music in the background......and thats with my headset pluged into my headphone port on my speakers,.....acually well it does it either way , pluged into the headhphone port or unpluged, i thoguht it might have had something to do with my speakers being too loud, and just my microphone was picking up background feedbakc, but NOPE!!!!

The "What You Hear" setting in my "Creative Surround Mixer" seems to be allowing my freinds on the other end to hear every little noise my comptuer makes, If...i turn it all the way down....thinking maybe they wont hear it........ THEY NOW CANT HEAR ME TALK!!!!!.....there is no way around it.....or is there? :angry:

If anyone would be so kind as to help me out with this little problem it would be wonderfully appreciated, i cant handle playing Online games without overwhealming sound and my **bleep** microphone!

Thanks: Cory. *aka* Gafston




Ok dont get desperated , escuse my English , but am not american , please try and open your mic option in the xp sound panel not creative sound panel , you can find it at your control panel , sound and audio devices, enable sound icon on task bar , afther that you sould see a little speaker in the botton right of your desk top , now mute mic setting whit in this panel and run set up audio in you msn messager , that is all mic not li've and enable to use your coms in games , have fun , Bassbait 47th , ahhh run the set uo sound everry time before opening your coms , to enable mic , make sure it is muted at the panel of xp setting then do it

Soundblaster Live 24bit Prob

Hi i've been having problems with my new Sb li've 24bit card, having problems in some games that i can't seem to remedy was hoping i could get some help or ideas to try.
Heres the problems i have, when playing 2 of my favorite games Il2 Forgotten battles, and World War II Online I experience crackling , some sounds are to faint and some are to loud.. sounds are more loud if i look up appose to looking forward or to the side at objects making the noise.. Some sounds are missing altogether.
I think both these games use Directx for there sounds. Must be a problem with directx.. I've tried everything to fix the problem and nothing makes a diffrence. I've reinstall the drivers 4 times, tried playing with all the settings for the soundcard like speaker settings, equalizer, EaX, bass booster, lowering hardware acceleration for sound in directx, tried diffrent settings in the games setup and nothing seems to help.
I alos have windows Xp Pro fully updated and directx 9.0c, and all other drivers are updated including my motherboard drivers. it seems like to me.. that maybe its not positioning the sounds threw my headphones correctly.. even thou i have headphones selected in speaker settings sounds like its working in surround sound threw my headphones and missing some of it.. i donno.. But anyways thx for any help in advanced.

Yes i updated the drivers for my graphics card as well, i have tried 2 diffrent video card drivers . I've updated every driver for my system and tried some older drivers for my motherboard to. I've tried everything in that knowledgebase article as well over the last couple days and nothing seems to make a diffrence. I don' have another system to try the card in at the moment but today i put my old SB li've Value card back in and tested these games and the sound was perfect.. maybe this card just dosen't work well with certian sound technologys? or maybe its just defecti've i donno.. Is there anything else i can try?
Thx for the reply

Onboard SoundBlaster Live 24bit probl

I just recently got a MSI nforce 4 motherbaord (platinum SLI) with onboard Li've 24bit. It works fine for low quality sound, but if i try and utilise it fully in games, like Halo, then it lags and only plays parts of the sound. I was wondering if it could be that the hardware it not fully accelerated but i'm unsure where to find that option.
I'm running XP with the latest drivers. Please help.
Cheers, Mcphie

i guess creatives products are just cack then! all i have read on these forums is how people from a variety of different soundcards, experience this pop and crackle noise. but yet, no proper drivers fix for most! and the fix they suggest rarely seem to work. certainly not for me!
quite frankly, im rather anoyed that creative are being allowed to get away with this. i for one will NOT be buying anything in your range again.

Sound blaster live 24bit full volume buzzing soun

hello ,??i just recently bought sound blaster li've 24bit, i have got 2.0 alteclansing VS220 speakers(no subwoofer), wanted to ask when i turn my speakers to medium volume ok no buzz , no problems but when i turn it to max. loud buzz comes from speakers, is it my speakers or is it the sound card signal to strenght ratio thing i don't know help me out.

Type in run " msconfig" and look for the startup item for the app, in your case?CTsysvol . Place a check in the box next to it.
Also type in run "services.msc" scroll down and enure that anything for Creative is set to Auto.
Try that and see how ya go.
Message Edited by xmn on 03-29-2006:55 PM

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

SB live 24bit quest

Similar Messages

Maybe you are looking for