SB Live! 24Bit Works for a few seconds then st

my SB li've works for a few seconds then sto
ps.
if you mute it, then un mute it, it works for a few seconds and stops again. when it stops working it makes some low clicking sounds with no audio output, has anyone seen this before or have an suggestions, its not the speakers its definitly the soundcard.

more info:
i just purchased and installed the card
i have tried everything in the faqs
if u play music it goes in and outMessage Edited by noobguy on 07-0-2005 09:42 AM

Similar Messages

  • Widgets work for a few seconds then stop!

    Recently all my widgets, default or notepad3 for example simply stop working after a few seconds in use, has anyone else experienced this, i searched all over and found terminal commands, suggestions to putting prefs in trash but i must be doing something wrong becuase the problem returns again and again.
    can anyone advise
    cheers

    My problem is that i use this widget called notepad 3 and i have multiple copies open with tons of info, i have tried putting the prefs on the desktop to see whether or not notpad 3 will return but un fortunately they where all gone so i will have to back up the info then try this, so ill get back to you soon, THANKS AGAIN FOR THE HELP, VERY MUCH APPRECIATED!

  • Iphone stops working for a few seconds then starts working again

    ok so i have an Iphone 3gs. the digitizer was messed up so i switched it from another iphone i have. they are both 3gs. after a while my 3gs started to lagg completely. the screen freezes and i cant do anything for a couple seconds then it starts working fine again. this has started to happen a lot. when im playing music it suddenly stops playing for a couple seconds and continues. i tried rebooting it and it didnt work. could it be the software? or the hardware? i doubt that it could be the changing of the lcd screen since the iphone completely stops working. should i try a restore?

    have you done a reset, hold down the home/poer button together until you see the apple logo and then release, then wait for the phone to boot back up.   see if that helps.

  • My 80gb doesn't boot up this morning. apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

  • My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

    The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
    Thank you, Neil.

    Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

  • I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

    I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

    Your warranty includes 90 days of phone support. Contact Apple.

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
    Problem signature
    Problem Event Name:          APPCRASH
    Application Name:          iTunes.exe
    Application Version:          10.2.1.1
    Application Timestamp:          4d756476
    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.3
    Fault Module Timestamp:          4d4d9a00
    Exception Code:          c0000005
    Exception Offset:          0034a672
    OS Version:          6.0.6002.2.2.0.768.3
    Locale ID:          2057
    Additional Information 1:          fd00
    Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:          fd00
    Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

  • Video Frozen audio works for a few seconds

    Hello all heres my problem.
    Video frozen on frame navigated too with the track bar.
    Audio works for a few seconds after the track bar is used then stops.
    Timer on the side dosen't incriment only changes when the track bar is used.
    Every time the video is paused and then played again the audio starts from the
    same place and stops in the same place again
    All videos are downloaded from itunes.
    Works fine in Quicktime.
    VGA Card: GTX 480 - drivers up to date
    Processor: AMD Phenom II - Quadcore
    Itunes Version: 10.7.0.21
    The whole thing strikes me as a failure of the video to increment the current frame and not a result of the failure in the video prossessing
    the short amount of audio is proably just buffered ahead of the video for syncing reasons.
    I have no real idea though but it is my best guess.
    Thank you in advance for any assistance rendered,
    Nargodian.

    Hi Thomas,
    Ok this does seem to say that the ports are set up and iChat is connecting properly.
    iChat also thinks there is enough bandwidth at the start and makes the connection.
    Is this to a PC ? Video freezes have been seen here when connecting to faster PCs.
    What you describe though sounds more like a PC that has not "Tuned" their cammera or Mic to the AIM Application.
    Ralph

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • IPhone 3G displays apple logo for a few seconds then reboots (continuously)

    Hi all,
    So far my iPhone has gone from not turning at all to booting with the apple logo for a few seconds, then disappearing. My device will do this over and over again until the battery is dead. When I plug it into my computer, it works completely fine, syncs, restores, etc. The phone will remain powered on after unplugging from my computer, but my screen is unresponsive to touch and occasionally the lcd will become very dark (dimmed)
    My assumption as of right now is that it is a hardware issue, any suggestions or pointers for my next steps? I'm running out of ideas before I give it up and send it to apple

    Hello xtn,
    As paulcb mentioned, try resetting the iPhone. The behavior you've mentioned would be consistent with a stuck Sleep/Power button. However, it is odd that it mounts and works OK with your computer. A physically stuck button would tend to cause the iPhone to repeatedly mount and dismount from iTunes as well.
    One last thing you can try is to restore the iPhone and set it up as a new phone.
    If the issue persists, you may need to have it serviced:
    http://www.apple.com/ca/support/iphone/service/faq/
    Charles H.

  • Having issues with hard drive, trying to start up football manager 2015 but it reads for a few seconds then ejects itself , ive tried other cds and it reads fine so tried older versions of football manager which ive used before and they dont either

    im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
    and have tried older versions of football manager and they dont read either
    any help would be greatly appreciated
    thanks

    Try resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
    Intel iMac SMC and PRAM resets

  • Macbook screen goes black for a few seconds then reappears fine

    The last two days my macbook screen has gone black for a few seconds then reappeared a few seconds later. Its as if it goes to sleep for a few seconds. The two times it has done this it has been charging. I have checked for hotspots but i have not activated any. I only bought the macbook air two months ago and have been really careful with it so i am confused.
    any help? Please?
    Thanks people.

    Hello @bobbiy58,
    I understand that your HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop PC is going black for few seconds and coming back. I need to ask has this just started? Like since you connected your X-box? If so have you tried disconnecting the X-box to see if it stops?
    Please re-post and let me know. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Why does my ipod classic (80gb) connect for a few seconds then disconnect?

    I have a ipod classic 80gb, granted its old, but it has a big memory so I can store my whole collection. Anyway, when I connect it to my PC (with windows 8.1) it will connect for a few seconds then disconnect. It will sometimes start to sync, but then disconnect after a few seconds. My computer is pretty new, Acer Aspire V5. I have tried reinstalling itunes, a new cable to connect it, different usb ports(2) and with and without the pc plugged into the mains, which is when it starts to sync for a brief second. Has anyone else had the same problem??

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • TS1424 i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

    i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes
    If you aren't in a country where you can re-download music or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for

  • HT4906 how hard is it to delete photos in photo stream

    I had a heck of a time getting some old photos out of picasa. I would hate to make the same amount of work for myself with photo stream. Is it hard to delete photos once they are added to photo stream? Thanks, in advance.

  • Updating CSA server w/MS updates

    Are there known issues with applying the monthly critical MS hotfixes/patches on the CSA server? It is CSA 6.0 on a Server 2003 OS; I am about to start patching all Windows servers as MS releases them, but I don't want to break CSA in the process.

  • Hi Experts, a questions concerning next page of first page in smartform?

    Hi Experts, I have a smartform layout and it has only first page, can I make the next page empty for the first page? I want to print one page. Kind regards Dawson

  • Can anybody tell me the link to download 10.1.0.5 patchset

    I want to patch my DB with 10.1.0.5, So Can anybody tell me the link to download 10.1.0.5 patchset ?? thanking you

  • Adobe Reader 9 prints garbage

    When printing some PDFs, the text output is incorrect (any graphics are OK). Each PRINTED text character is printed as the next ASCII character in sequence. As an example, the on-screen text "REGULAR" prints incorrectly as "SFHVMBS". My environment: