SB live 5.1 channel problem, pls h

I am running a ASUS A7N8X Mainbord with onboard Realtek ac97 6channe/5. audio, but have installed a SB li've 5. and having very weird problems
My speaker system is ( U.S-Can , I can not find a website for ) a analog 6channel/5. setup. 3 lines going to Rear out, line out, and sub/center pluged into the digital out jack , and all cables from speaker amp/control are hooked up to thier apropriate place's
when I diagnose then test I get : test center ( come out on rear left ) , nothing , nothing , test rear-left ( comes out on center ) test rear-right ( come out on Subwoofer ), nothing
in my BIOS I disabled the onboard ac97 Audio Controller and the onboard Audio ac97 modem contoller
I have search the knowledge Base and nothing relates to this problem.
My onboard 5. works fine all channels correct ( before disabled and SB install )
I am very confused on what is going wrong here.
Thanks
Message Edited by Bubbs on <SPAN class=date_text>-06-2004 <SPAN class=time_text>:50 PM
Message Edited by Bubbs on -06-2004 :5 PM

Hmm, wait a minute, how many jacks goes into the sound card?
or 3?
If its , make sure you plug it into the Digital Out jack and turn on the 'Digital Output' option in your mixer settings.
If its 3 going into the sound card, turn off Digital Output.

Similar Messages

Dual channel problems?

Hi all, I purchased an 8GB set of 10666 GSkill memory for my dv7t-3300 CTO core i7 laptop in December of last year. I first posted in the G.Skill support forums and they recommended I try HP, I will copy over my entire post there as it is detailed as to what I did last week.
Hi all, I've been having some weird issues that I can't be sure are memory related. It's lengthy but I'm trying to explain what all I did and why it's so confusing.
Last December I bought an 8GB memory set for my HP dv7t Quad (Core i7 720QM) laptop, the memory model is F3-10666CL9D-8GBSQ. Shortly after installing them I started to get a random BSOD for MEMORY_MANAGEMENT, but it is so rare and usually happens when I am away from the computer. The past month or so I have also been having my web browser random close quite often, sometimes 5 times in an hour (I use Palemoon/Firefox and it is constantly using over 500MB).
This week was dedicated to memory tests, I ran memtest86+ almost every evening in various configurations. I started with how it had been set up for months and I managed to get some errors in test 5 that were around 2000MB and 3000MB. The next step was to run each stick individually... no errors after 10 hours on each stick. I then put them both back in and ran the test again, no errors again. I then switched the sticks around and ran again, got errors in the same spots. I also tried using the standard memtest86 and the Windows Memory Diagnostic available on the Ultimate Boot CD, neither of which showed any errors at all with both sticks in. I also found MemTest 4.0 from HCI Designs that runs within windows, and it found an error in one of the 3 sessions but did not say where it was.
I have since put my original sticks into the laptop which were 1 2GB and 1 1GB stick from Samsung. Thus far (less than 12 hours) I have not had a single random browser close and no BSOD. I am wondering if the problem is the sticks themselves or dual channel being used(I assume dual channel only works if both sticks are the same size). I looked in the BIOS and can't find a way to disable dual channel, or any advanced BIOS options at all, and I do have the most recent BIOS from HP.
Does anyone have any opinions as to what I can try before trying a new set of memory? If it is related to the dual channel I'll just live with it and get mismatched sticks, not going to send it in under warranty for something easily by-passable.
One of the site admins over there was wodnering if there was any sort of BIOS upgrade planned in the near future. I'm not expecting anything since the last update released by HP was in December of 2010. If there is nothing else that can be done I will just live without dual channel as the memory appears to be working. As I mentioned in the other thread, this is something too small to be without a PC for warranty work.

Read here https://forum-en.msi.com/index.php?topic=117284.msg883658#msg883658

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

Boot problem == pls HELP

I have use the utility disk and format the machintos drive , and use Extended (Journaled , Encrypted) , it ask me for a password (typed the password, confirmed the password - done) , after that i tried to install a fresh copy of Lion (i waited to be downloded from apple.com - done) after that it said that the fresh copy it will be installed and it will reboot by itself -> done ... from here the problem it's starting .... now my macbook air , it dosent start anymore it keep showming me, instaid of the apple sign from the start , a sign like the one from ghost busters (but without the ghost in it ) , i have tried to boot from cd , from usb , nothing dosent seams to be working.
If anyone know a solution to this problem, pls HELP! Thank you in advance...
p.s. before i had 2 hard drives that show up when i press the ALT button (machintos hd and utility drive, or something like that) now.. the only thing that it's showing me is : mac os base system , and if i try to use partition magic or something else, from a usb, it will tell me something about a bootguard , but i don't know how to insert the password.

Glad your issue is fixed. Thanks for the update!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Sender JDBC Commn channel problem - Channel is not reading any data.

Hi,
I am referring to the following blog as i have exactly the same problem:
[Blog|Sender JDBC Commn channel problem;
I communication channel monitoring i am getting the following logs -
6/21/10 7:19:07 PM Processing started
6/21/10 7:19:07 PM Retry interval started. Length: 86400.0 seconds
Here in the channel the poling interval is 86400 seconds.
Now according to this blog the solution to my issue is "Check whether anything is locked in "Locking adapter" in VA? If there is then just release the lock and restart the comm channel. Note: In "locking adapter" the name will be something like $XIDBAD.JDBC2XI."
Mine is a PI7.1 system and i am not able to find any thing like this in NWA.
Can some one please help me on this?
Thanks & Regards,
Anshul

try;
Goto NWA -> Availability and Performance Management -> Resource Monitoring -> Locks

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip Couridis

iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece.

JDBC Sender Channel problem. Pls help

Hi,
In JDBC Sender Channel in Connectiion String I am giving value
jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1
where cscappnoi022.asiapac.globalcsc.net---is where Oracle server is installed
1527 --- is my Port
IS1 is my system SID --- Pls let me what value should come here and how to find.
I am getting error
"Error during database connection to the database URL 'jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1': SQLException: Io exception: The Network Adapter could not establish the connection'"
Regards

hi,
Your connection should be :
jdbc:oracle:thin:hutting/[email protected]:1521:pnt
jdbc driver should be:
oracle.jdbc.driver.OracleDriver
Regards
joel.
I only hope that your other jdbc scenarios are working fine , this is just to rule out the possibility of driver related errors.

Mp3 audio channel problems in h.264 video file

I'm trying to encode an mp4/h.264 video file with an mp3 audio channel. I'm tried encoding it with both Adobe Media Encoder and ffmpeg (using libmp3lame). I'm streaming the video files using ffmpeg to stream the file through Red5 as a live stream. When the Flex AIR clients play the stream (using the Spark VideoDisplay component), I hear a frequent sort of chirping sounding audio artifact. I've also tried playing these files directly from my harddrive in a simple AIR app using NetStream and the Video component. When I try this I don't hear any audio at all. In both tests if I use an FLV (On2 VP6) file with an mp3 channel it sounds fine. Unfortunately I need to use h.264 video.
I've tried using AAC audio but am having a different issue with that: http://forums.adobe.com/message/4096536
Any ideas why I am seeing this audio artifact problem and how to resolve it?

Most h.264 should work.
Have you tried FILE/IMPORT MOVIE and then navigate to the h.264 file?
If that does not work, but the h.264 will play in QuickTIme PLayer, then you can get MPEG Streamclip from Squared 5 (which is free). Drag the h.264 file into MPEG Streamclip. Then FILE/EXPORT TO QUICKTIME. Choose Apple Intermediate Codec for Compressions. You can use this file in iMovie by clicking FILE/IMPORT MOVIE.

Pearl 8120 - email setup problem-pls advise

Hi everybody,
I bought my bb via ebay - unlocked,new. I cant setup my email, as it only has 2 options:
1/ setup using bb enterprise server
2/ skip email setup
missing the option setup /add new email address for bb internet email
i am a private person with no enterprise password, is there something i can do to make this work?
my seller has no clue what i´m talking about, replaced the phone and it has the same problem
thanks a lot
Erika

Maryteetee wrote:
Pls,I just bought a new BB,I want to set up email but it is not co-operating. What can I do?
Hello,
Please add some details..."not co-operating" is inadequate to even make any guesses. What exactly do you try? What exactly happens with what you try? Are there error messages? If so, what are they (exact, complete, including punctuation please)?
Details always help us to help you better.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Creative Inspire T6100 - I got a problem, pls help me!

I just bought a creative Inspire T6100 system, but I got a strange problem.
I can hear just from the rear left and center speakers, all the others are muted. Every wire is perfectly connected to my phase 22 with 3 jack connectors. I tried to disable the basic soundblaster in the motherboard(I got an asus P5K), but it's the same... nothing changed...
Can someone help me pls?

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Live! Cam Voice problems

Hi I'm using Windows Vista and I got a few problems about the Live! Cam Voice camera.
First I installed it, with the cable in the computer, then I read the cable shouldn't be in the computer so I uninstalled what was possible uninstalling and deleted the "Creative" directory which contained some files still. But now when I'm trying to install it I'm getting either some kind of "Setup.cpp" error, or I'm getting a "Setup.exe has stopped working". I've tried uninstalling it again but I'm still getting errors. How am I supposed to uninstall all of the installation so I can reinstall?
Also I don't get the manual of installing the Vista driver. It says something like "1. Install the package 2. Go to control>sound and change some options there". I didn't know where I should install it, so I installed it in default path and tried to open the .exe files and none of them were working. Are they supposed to be working?

Ok, I waited one day and now the setup is working, so now I inserted the cam when it told me to. But I still need to install the vista drivers, else it's telling me "No supported Live! Cam detected. Please plug in to continue...". How do I run the exe files and where should I extract the exe files? Or do I need to run them at all? Help please:S I'm using Vista 32 bit
Message Edited by Xleniz on 03-02-2009 02:04 AM

Live! cam voice problem

I'm not able to install my Creative Live! Cam Voice on my computer. I have a Creative Sound blaster Audigy 4 pro sound card. I think the problem is the sound card because i can install the cam and i?see image but i cannot install the mic on the camera. All the time windows ask me for USB fail on driver. I need help please

Can somebody please help me from this thread, i have a similar micrphone issue.
I have XP Pro SP3, i can uninstalled spy bot and AVG 8 in case it was causing issues, i have the USB devcie running properly with drivers ok, the video feed is ok, but it does not show USB device or Live cam mic as the manual says in the device properties of the sound section !!
I have looked and fiddles with all the Sound properties to find the USB device and get it working - no luck at all.
I must be on for a record of over 2 hours getting this to work, nearly 6 installs and re installs with the CD and via web.
HELPPPPPPPPPPP Please.

MSI BIG BANG TRINERGY dual channel problem!

Hey forum, I just installed a newly bought msi big bang trinergy. Everything went according to plan except from the point where I installed the 4gb (2x2gb) ram dimms( I have the XMS3, 4gb kit by Corsair).
Let it be noted that i followed the instruction manual and installed the dimms in the proper slots. Then when the moment of truth came and powered up my pc, it wouldnt boot. It would go into an endless restart cycle without booting. Then i unplugged the dimm3 and started only using dimm1 and everything went well. I also switched the ram dimms (in case one of them was faulty) and placed it in dimm1 and again there was no problem.
My take on this situation is that there must be some hardware problem concerning DIMM3. I also run a BIOS update in hopes that something might change but no luck.
..So what is your take on this?
Thank you in advance for the advice.
P.S Since i had a P55 mobo before Big bang i read that format is not necessary so i didnt format the pc. Can that be the cause of the dual channel mal-function?

Quote from: Jack on 11-May-11, 22:57:43
Nope.
There are a couple of explanations for the behaviour:
1) there is a problem with the modules
2) the memory slot itself or underlying circuits is/are defective
3) there is a short circuit problem somewhere inside the case which basically blocks that particular memory slot
4) the CPU (or its memory controller) is defective
5) there is some sort of pin-contact problem [bad contacts between the board's socket pins and the contact pads of the processor], caused by bent or broken pins or by too much pressure exerted by the CPU's heatsink
I would start poking at explanation 3) by testing the board outside the case on a non-conducting surface in barebone configuration and, in case that does not change anything, go for number 5): take off the heatsink and inspect both socket pins and contact pads for any irregularities [use a magnifying glass!]
I went to a technician to check the mobo where we tried different memory modules and cpu (100% working ) on a bench table.The pins on the mobo were not bent or anything. We checked all the points you mentioned that needed to be checked but still the problem persisted so it was a memory slot problem. Thanks for all the help! Really appreciate it, the replaced mobo works perfectly

Creative Live Vista IM (VF0420) Problem, PLEASE HELP!

Hi
I use Freetrack to play Airplane Combat Simulators, it's a program that uses the WebCam and a hat with 3 LED to simulate the head movement inside the cockpit.
I'm using Creative Live Vista IM (VF0420) installed the CD drivers and it works perfectly with the Freetrack and all the other programs.
Recently i've bought a Joystick (Saitek Aviator), so I installed the drivers on the CD plugged in the Joystick and it was also working perfectly.
The problem is that now the camera it's not working and the only way to get the camera working is to unplug the Joystick and restart the computer.
After the restart I tested the camera and it was working ok, but again, just after I plug in the Joystick the camera freezes the image and stops working until the next restart with the joystick disconnected.
Resuming, this camera only works when the joystick is disconnected since the computer restart. LOL
I'm using Windows XP 32 Bit + SP2
I tested with other webcam (also Creative) and had no problems working with Freetrack and no conflicts with the Joystick.
I see no conflicts on the Device Manager.
Anyone with the same problem or with the solution please reply.
Thank's in advance.

buddhika wrote:
Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
I have questined creative support but no answer.
Please help me !!
If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
Disable the Creative CD-ROM detector (service).
jutapa

SB live 5.1 channel problem, pls h

Similar Messages

Maybe you are looking for