SB Live 5.1 - Digital out does not wo

With the Sound Blaster Li've 5. that I have, I have never been able to get a digital signal to play. My first theory is that my A/V Recei'ver (Onkyo TXDS 747) from 998 can only handle a digital coax signal of 48kHz. Is it possible this receiver is too old to handle digital in? If that is the case, can I de-tune the sound card with some setting to an output that my receiver would accept?
Secondly, what is the proper adapter to use to go from the mini-jack to the full sized digital coax table? (The proper term may be SPDIF).
Thanks!

That's right, I have no sound at all out of the digital jack. Analog works fine. I did more digging and found the manual on this site and it says to you a mono mini-jack to RCA adapter. So I think I'm good with my connection. So there must be a software adjustment of some kind.
Any other long shots you can think of?
Thanks!

Similar Messages

Audigy 2 ZS - Headphones work, Digital Out does not

Just install an Audigy 2 ZS. Bought a miniplug-RCA plug adaptor to connect it to my digital coax cable into my Onkyo receiver. Headphones show that sound it working. Onkyo shows no PCM signal received. I know it works because my last computer used the same amp and same cable. Is there something in the software I'm doing wrong? I'm tried switching the frequency rate, the digital out only, 2 speaker and 4 speaker settings. What am I doing wrong?
John

SoonerFann,
One thing to consider is that the digital out on the back of the Audigy 2 ZS is not an actual SPDIF out. It uses the DIN interface which is similar in form, but has a different rating on the voltage of the connection. Most receivers will still work with it, but some will not. This is most likely why it is not showing PCM on the receiver. If you have the platinum dri've, there is a true SPDIF on it but we cannot guarantee that it will work with a receiver using the DIN on the Audigy 2 ZS.
Jeremy
P.S.
You know, I am located just down the highway from your college of choice. It happens to be the heart of "Orange Country" but still is cool to see someone who is a fan of the "other school" on the forums.

Digital editions does not recognise Samsung Galaxy Tab 7.7

Digital editions does not recognise my Samsung Galaxy Tab 7.7. The device is authorised. Please help. Thanks

Your last post is confusing - and the technology is unforgiving. So let me
see if I can piece this together....
Starting with the Tab 7.7: some manufacturers have devices that they
improve upon and claim compatibility because they're 'just like' XUY that
they made last year. Sometimes this is true, but often, the user ends up
with claims and not much function. Samsung is pretty good about this, but
you can't assume that, just because you can connect the Tab to your
computer and move stuff back and forth, that the programs on your computer
are going to work with your Tab - and vice versa.
The OS on the tablet is NOT compatible with ADE, so you can't drag and drop
ebooks as you would with other ereaders. You have to use utility programs
to move the ebook to your Tab. Once you move the ebook to the tablet,
Aldiko should be the program that you use to read the ebook. In your
situation, all ADE is doing is retrieving the ebook from the source, and
storing it on your computer.
You mention "software/apps that are available for DRM". DRM is the copy
protection on an ebook. It's a software switch built into the ebook's ID
file and all that it does is to tell you whether or not you can copy or
print the ebook. ADE and Aldiko look at the switch when you open or try to
copy the ebook. And if the DRM settings are preventing Aldiko from opening
the ebook, you're stuck. Those settings come from the publisher,
distributor or author, not from either ADE or Aldiko. You can try to open
the ebook on your computer with ADE and see if you get the same results.
You mention error messages. I think, from the context, you're getting them
on the Tab when you try to do something with the ebook. Any messages
relating to time relate to the settings for your time, date and time zone.
I'm guessing here, but I think your Tab's settings aren't the same as your
computer's, and that's why you get the 'expired' message. The 'unknown
error' message may be from Aldiko - and we're not equipped here in the ADE
forum to deal with that one - sorry! If the error message section of the
Aldiko user guide doesn't tell you either, then you might be able to find
out what to do about it from an Aldiko forum.
Your Overdrive comment has me puzzled. I looked for some context in the
other posts in this stream, and I didn't see anything that helped.
Overdrive is a 'elibrary management system' that does much the same thing
as ADE does. So, you can import and export ebooks via Overdrive. Your
situation seems to revolve around how you get ebooks onto your Tab and then
get Aldiko to open them for you to read, and I don't know if Overdrive
supports the Tab either.
==========

Z87-GD65: Live Update 5.0.112 does not display BIOS 1.8 update

As the title says Live Update 5.0.112 does not display BIOS 1.8 update for the Z87-GD65. Yet Live Update 5.0.111 does show the BIOS 1.8 update. Why is this so?

I have to be honest and say I am tearing my hair out trying to update the BIOS on this motherboard. Why is it so convoluted?
1. I tried the USB boot with FPT. I can't get the FPT and BIOS files to show when I reboot to the bootable USB stick. Apparently the FPT version is used to also flash the "me extension"? (Whatever the hell that is).
2. I can't use the Live Update because it is unreliable (as claimed by the forum).
3. I can't use MFLASH because that doesn't work properly and corrupts the BIOS.
4. Yet another method is to download the "MSI HQ Forum USB Flasher". Which is in a .RAR file no less!
Geez MSI you don't make it easy for the average punter. When I had a Gigabyte motherboard it was a simple Windows flash utility and it worked!
Is there one single easy way to update this BIOS?!

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Logging out does not drop me to console but a black screen

Recent pacman -Syu upgraded me to latest xorg-server and I have this problem: logging out does not drop me back to console but a black screen and after 30 seconds, a blinking cursor. Nothing works and I have to reboot. If I choose to reboot (instead of logout) I get the same result except that eventually the computer reboots. Using nv - no problems. Using simple nvidia (single screen) - no problem. (I have a monitor and tv-out setup). Problem remains whether I use xfce4 or fluxbox. And the ctrl-alt-backspace keyboard shortcut results in the same black screen. Xorg.0.log tells me nothing. Before the upgrade, no problem.
I usually use startx and I have ck-launch-session etc in my .xinitrc. I use the latest nvidia-96xx driver and have no other X problem. Everything works, including the tv-out.
This is a minor inconvenience really and I usually switch to a console and as root killall X if I need to log myself out for any reason. But if anyone as a clue as to why this is so, or suffers the same problem, do let me know. Thanks.

Thanks guys...
@ckristi - I don't use kdm. I startx from console when I want to go into X.
@madtux - I guess I will have to read up on kernel mode setting and KMS - I actually don't know what you are referring to although I have seen KMS refered to in this forum with reference to xorg. Any links? Do note no problems with nv and single monitor nvidia. Hopefully the cure is not worse than the disease.

Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

Thanks for your reply.
Server, encoder and player are all on the same computer.
Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
Thank you for your time.
Kind regards,
Marius

Digital signature does not validate with the given key

We are switching our single-signon provider from openssl to Weblogic's SAML. I am trying to create a test application that will send mock SAML assertions to our test Weblogic SAML server before we begin integration with the client that will send real SAML assertions.
I have configured a Weblogic 10.3.5 instance to be a SAML Service Provider as well as created an application that creates test SAML assertions to post to the SAML server. I'm currently using a self-signed certificate to sign the SAML assertion. I've imported the self-signed cert into both the DemoIdentiy.jks and cacerts on the Weblogic SAML server.
The Weblogic SAML server is giving the following error when trying to validate the signature of the assertion:
<SAML2Assert: Start verify assertion signature>
<SAML2Assert: The assertion is signed.>
<SAML2Assert: Digital signature does not validate with the given key
org.opensaml.xml.validation.ValidationException: Digital signature does not validate with the given key
at org.opensaml.xml.signature.SignatureValidator.validate(SignatureValidator.java:68)
at com.bea.security.saml2.util.SAML2Utils.verifySamlObjectSignature(SAML2Utils.java:229)
at com.bea.security.saml2.providers.SAML2Assert.verifySignature(SAML2Assert.java:285)
>
I get this error when the SAML assertion includes both the cert and the public key, just the cert, just the public key or neither.
I'm pretty sure I've configured the SAML instance correctly since I followed the steps provided by another group who got this working with a different client. The only difference is they are using a real signed certificate (Verisign i believe) instead of a self signed cert.
I'm looking for any help to track down which step in the process I've missed or implemented incorrectly.
Thanks!
Edited by: 911967 on Feb 6, 2012 12:26 PM

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Adobe Digital Editions does not detect my e-reader

Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adobe does not - I have re-installed twice but still the same.

Re-installing is not the answer. Most likely, the issue is either the
sequence of events that you go through, whether the SONY ereader is
supported and whether it is registered properly. Let me go through these in
reverse order. I am assuming (dangerous) that the SONY is 'new to you'. If
not, then please accept my apologies.
You start with making sure that the SONY ereader is supported by Adobe
Digital Editions (ADE from now on). Check the list of supported devices
HERE <http://blogs.adobe.com/digitalpublishing/supported-devices>. If it
is, then you know that the rest of the process should work.
Next, attach the ereader to your computer. Let's assume a Windows
machine: plug it into a USB port and wait for Windows to recognise it and
tell you your hardware is ready to use. If you've done this before, check
that Windows has added your ereader as a device by going to My Computer and
looking at the disk drives. Your ereader should show up. Then, if you
haven't registered the ereader with SONY, you should go to their website.
It will look for attached ereaders and confirm that it finds yours.
Register it with SONY, using your Adobe ID and password. SONY will then
write a small record onto the ereader, which ADE needs to see. Close the
SONY website.
Next, bring up ADE. If all is well, ADE will recognise your ereader and it
will show up on your bookshelf. If there's a problem with the ereader, ADE
will tell you that, and we can go from there.
If all is well, you can transfer your ebooks via drag and drop. When you're
done, close ADE, but don't disconnect your SONY until it tells you it's
finished updating itself. THEN eject it via My Computer or the small icon
in the system tray at the bottom right of the screen.
Hope this helps!
==================

Adobe Digital Editions does not decect my e-reader

Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adove does not - I have re-installed twice but still the same.

Sorry, but you are at the wrong forum; this one is only for discussions on the forums themselves. The Digital Editions forum is here:
http://forums.adobe.com/community/adobe_digital_editions

Newbie: Flash tried to play a live or recorded stream that does not exist.

Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

So just to clarify, the server is installed on the same machine that you are using to do the encoding, correct?
And you are using Flash Media Live Encoder to do the encoding?
I don't have Flash CS5 for I'm not sure what is in there to do the encoding.. but more on FMLE here:
http://www.adobe.com/products/flashmediaserver/flashmediaencoder/
There are two step used to get the encoding going with FMLE...
1. after setting all the config settings, click the "Connect" button. Then open the encoding log and you will be able to see if connection was made to the server or not. Can you successfully connect to the server? if not, what is the error message?
2. click the "Start" button and in the encoding log, you will see that the audio and video encoding has started. What does the encoding log say?
Best wishes,
Adninjastrator

I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

- See:
]iTunes Store: My credit card's security code or zip code does not match my bank's records
- If still problem contact iTunes by:
Contact iTunes

Digital Editions does not recognize and authorize sony PRS-505

The problem is that it my first purchase a DRMed ebook at dieselbooks and I dowloaded digital editions and authorized it with no problems,
i downloaded the ebook and i was able to read it on digital editions. But the problem is that when i plug in the sony reader digital editions does not recognize it, so i cant authorize it and im unable to read the ebook on sony reader prs 505.
Since the ebook is DRMed i cant use another program to do it, i tried acrobat 8 with no solution.
Do you guys have an idea how to solve this problem?

Make sure you have installed and are running the latest Sony EBL software, the installation contains the needed drivers for ADE to talk to the 505. Note: if you are running on a Mac, ADE will not be able to talk to the 505 and you will have to use the Sony EBL 3.x instead.

SB Live 5.1 - Digital out does not wo

Similar Messages

Maybe you are looking for