SB Live 5.1 & SBLIVE not work

am having the same problem... I have a SB Li've 5. (SB0220) and I did a clean install of Windows XP Home SP2 and Windows doesn't even detect it.... I have the Sound Blaster Li've Installation cd and it won't install the drviers because it says I do not detect the SB Li've card...any ideas.... I have a Giga-Byte 8IK00 (Rev 2.0) with on board audio turned off...it worked fine before I re-formatted my machine any ideas? Also Last night I took out the 5. and inserted my SB Li've X-Gamer and still nothing my bios is up to date any ideas?

I am having the same problems with mine ( SB0220 ) Soundblaster Li've Dolby Digital 5..
I have tried using Li'veDrvUni-Pack(ENG) and Li'veDrvPack none of them detect the
soundcard. I have no cd to use with it, before this I used an intergrated soundcard on
my motherboard. When I put in the soundcard ( SB ) I disabled the motherboard one. After
I checked device manager I noticed it added something that said "Creative SBLIVE!
Gameport" and in other devices it added "Multimedia Audio
Controller" it is almost like it is detecting it but not as an audio device, or maybe
not the device the driver install is looking for . Then I
checked your webpage saw to change the windows setting to "PIO only" I did that took out
the card and unistalled the devices it was said to be, then reinstalled with the same
problem. I am unsure how to do the BIOS check and make sure pci 2. is acti've, if you
can tell me how to check the bios problems, then I will and check back in, but this is
less than 5 months old computer and I have not had any problems with other devices ( ie
: the new ehternet card I installed )

Similar Messages

  • Live Preview Highlight is not working.

    I recently downloaded Edge Code to a new work computer and the Live Preview Highlight is not working.
    I have Edge Code installed on a personal computer, and it works great. The version I am using was downloaded about 6 months ago so I am not sure if they changed something with the most recent version. When I highlight a section within the html i.e. a table or row, it would highlight those same sections in the preview. However, this is not the case on my new computer.
    Anybody know whats up? Is it setting on Chrome that I need to change or is there some update that I am not aware of.

    I guess I assumed that you had Chrome setup to auto-update (like I have it). The only way Live Preview will work in a previous version of Edge Code is with an older version of Chrome.
    But there are other reason why Live Preview may not work in latest version of Edge Code. Take a look at Live Preview section of Troubleshooting Guide.
    Randy

  • Why Does Live View In DW Not Work With BC Template?

    The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

    Hi Alex,
    Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
    Date: Thu, 14 Feb 2013 05:49:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why Does Live View In DW Not Work With BC Template?
        Re: Why Does Live View In DW Not Work With BC Template?
        created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
    Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HDS live streaming to Flash not working

    Adobe Flash Media Server 4.5.5 r4013
    Windows 2008
    Sources:
    http://help.adobe.com/en_US/flashmediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0-8000.html
    http://www.adobe.com/devnet/adobe-media-server/articles/live-multi-bitrate-video-http-flas h-ios.html
    Live streaming a single or multi-bitrate video over HTTP to Flash does not work. I have followed the instructions on the 2 sources listed above repeatedly, but I can’t get live streaming over HTTP to Flash to work. Live streaming to iOS over HTTP works with no problems (single and multi-bitrate streams).
    I have tried the troubleshooting steps from the following:
    http://help.adobe.com/en_US/flashmediaserver/devguide/WS0432746db30523c21e63e3d12efac195bd -8000.html
    Troubleshoot live streaming (HTTP)
    1.      Services window (Windows): Flash Media Server (FMS), Flash Media Administration Server, and FMSHttpd services are running. ✓
    2.      Verified that the request URL is correct. ✓
    3.      Configured ports:
    a.      Configure Apache to use port 80. Open rootinstall/Apache2.2/conf/httpd.conf in a text editor. Change the line Listen 8134 to Listen 80.
    b.     Configure Flash Media Server not to use port 80. Open rootinstall/conf/fms.ini in a text editor. Remove 80 from the ADAPTOR.HOSTPORT parameter so the parameter looks like the following: ADAPTOR.HOSTPORT = :1935 ✓
    4.      Placed a crossdomain.xml file to the rootinstall/webroot directory. ✓
    5.      In Flash Media Live Encoder, select the Encoding Options tab, choose Output from the Panel options menu, and verify the following:
    a) The value of FMS URL is rtmp://fms-dns-or-ip/livepkgr. If you’re testing on the same server as Flash Media Server, you can use the value localhost for fms-dns-or-ip. ✓
    b) For a single stream, the value of Stream is livestream?adbe-live-event=liveevent. ✓
    c) For adaptive bitrate streaming, the value of Stream is livestream%i?adbe-live-event=liveevent. ✓
    Flash Media Live Encoder uses this value to create unique stream names. To use another encoder, provide your own unique stream names, for example, livestream1?adbe-live-event=liveevent, livestream2?adbe-live-event=liveevent.
    The encoder is showing all 3 streams being published and streaming.
    6. Check Administration Console: the livepkgr application and the 3 streams are running. ✓
    7. Check the logs for errors. Flash Media Server logs are located in the rootinstall/logs folder. The master.xx.log file and the core.xx.log file show startup failures. Apache logs are located in the rootinstall/Apache2.2/logs folder. X
    a)   core00.log: these errors did not occur every time that I tried playing the live stream but these are the only relevant errors in the logs.
    1. 7968 (w)2611179     Warning from libf4f.dll: [Utils] [livestream2] Discarded all queued Media Messages received before first Video Keyframe Message
    2. 7968 (w)2611179     Warning from libf4f.dll: [Utils] [livestream3] Discarded all queued Media Messages received before first Video Keyframe Message
    b) edge00.log:
    13:33:57 4492          (w)2641213 Connection rejected by server. Reason : [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (hds-live) is not defined.          -
    c) Apache-Error:
    1.     [warn]  Checking if stream is disabled but bootstrap path in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream
    2.     [warn] bootstrap path is in event file is empty for event:livepkgr/events/_definst_/liveevent stream name:livestream1
    As I mentioned, everything works on iOS and FMS seems to be creating all of the stream segments and meta files:
    a.     The 3 streams are being created in: HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\streams\_definst_
    b.    FMS is creating the following files in each stream folder (livestream1, livestream2, livestream 3):
    1. livestream1.bootstrap
    2. livestream1.control
    3. livestream1.meta
    4. .f4f segments
    5. .f4x segments
    The appropriate files are also being created in the HD:\Program Files\Adobe\Flash Media Server 4.5\applications\livepkgr\events\_definst_\liveevent folder, in which I have the following Manifest.xml and Event.xml files:
    <manifest xmlns="http://ns.adobe.com/f4m/1.0">
      <media streamId="livestream1" bitrate="200" />
      <media streamId="livestream2" bitrate="500" />
      <media streamId="livestream3" bitrate="1000" />
    </manifest>
    <Event>
      <EventID>liveevent</EventID>
      <Recording>
    <FragmentDuration>4000</FragmentDuration>
    <SegmentDuration>16000</SegmentDuration>
        <DiskManagementDuration>3</DiskManagementDuration>
      </Recording>
    </Event>
    I’ve tried clearing the contents of both streams\_definst_ and events\_definst_\liveevent (keeping the xml files) after restarting the encoder, and creating a different event definst for the streams (liveevent2 for example).
    We have an event in 2 weeks that we would like to stream to both Flash and iOS. Any help in solving this problem will be greatly appreciated.

    One step closer:
    Changed the crossdomain.xml file (more permissive settings).
    Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
    But at least now I can get the individual streams in the set manifest file to work:
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
    http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
    BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
    "The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
    I used the f4m config tool to make the file. These are the file's contents:
    <manifest xmlns="http://ns.adobe.com/f4m/2.0">
      <baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
      <media href="livestream1.f4m " bitrate="200"/>
      <media href="livestream2.f4m " bitrate="500"/>
      <media href="livestream3.f4m " bitrate="1000"/>
    </manifest>
    Thanks

  • I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

    I bought my iphone 5 in Houston on May 15 2013.
    IMEI 013428009645399.The problem I have is that in the country
    which I live GREECE the 4G is
    not working.Please if you have any solution for this
    problem let me know.My email is [email protected]
    Thanking you in advance
    Philip Couridis

    iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
    For what crazy reason did you purchase an iPhone in the US if you live in Greece?  If your phone needs servicing, it will have to be brought back to the US.  You cannot get that phone serviced in Greece.

  • When setting up converged network in VMM cluster and live migration virtual nics not working

    Hello Everyone,
    I am having issues setting up converged network in VMM.  I have been working with MS engineers to no avail.  I am very surprised with the expertise of the MS engineers.  They had no idea what a converged network even was.  I had way more
    experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
    Everyone including our consultants says my setup is correct. 
    What I want to do:
    I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters.  I have created all my logical networks, port profile with the uplink defined as team and
    networks selected.  Created logical switch and associated portprofle.  When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well.  Problem is that the cluster and live
    migration virtual nics do not work.  The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct.  However nics do not work at all.
    I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM.  I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
    switch.
    I am really losing faith in VMM fast. 
    Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
    Thanks

    Have you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
    Are you using static IP address assignment for those vNICs?
    Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
    Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration. 
    The details should be all in this whitepaper.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Cannot update graphics card BIOS, MSI Live upate 6 will not work.

    Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
    Live update 6 does not run.
    Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
    No UI.
    No Error message.
    If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
    As a result I cannot update to latest BIOS for my graphics card.
    Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
    CPU: AMD A8-6600k APU @ 4.60GHz
    RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
    Motherboard: Asrock FM2A88M Extreme4+
    GPU: MSI Radeon R9 280x Gaming 6G
    GPU details:
    Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
    The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
    I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
    With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
    But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

    No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
    if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
    1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
    2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
    once we have those 2 pieces of information someone here will be able to get one if Available for your card

  • Live update Monitor: autosearch not work

    I just upgraded to the latest version of Liveupdate monitor 3
    under setting u can choose auto search to configure a schedule for liveupdate to automatically search for new driver or utility updates.
    this autosearch still not work and ends with
    Download check list fail. Can not connect to internet or the server is busy.
    any idea what it wrong.... all my systems with liveupdate installed get this message.
    thx
    ray, switzerland

    I just ran LiveMonitor without problem. But I have had a lot of problems this weekend so I don't think the MSI servers are 'fixed' yet. Just keep trying.  

  • Sblive not working with Cool n'Quiet, how about Audigy

    My SBli've will not work with Cool n'Quiet enabled. I tried moving it from slot to slot, I fumbled with the Bios (and every change made matters worse), memory is ok (at least according to memtest and prime95), kx drivers won't help either (but sound a lot nicer).
    Well, what gives, the card is a little over seven years old and has earned a retirement.
    I'm thinking about replacing it with an Audigy 4 (not pro) und would be very happy if someone could write about her or his experience with the card, esp. with Cool n'Quiet enabled.
    Btw. what kind of card is it anyway? Does it use a 0k2-Chip?
    thanks
    My System:
    AMD X2 3800
    Asus A8V (Via KT800pro, AGP)
    Nvidia 6600GT (AGP)
    024 Mbyte RAM (conservati've timing)

    I cant promize anything, but it should work. X-FI and Audigy 2 work just fine with C&Q enabled. So Audigy 4 should work fine too.

  • Windows live and yahoo messengers not working

    Hi,
    I have a blackberry 8520 using V5 OS and downloaded the latest service books as well as the latest version of windows live and yahoo messengers. The problem is i try to log onto either of them and its justs tries to login with no success, i  am on a pay as you go tarfiff  with access to wifi. Anybody got any ideas how i can fix this problem. many thanks in advance.

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books (pre-BB10 devices only)
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to find out if, via the plan you are paying for, you even should be expecting these services to function. Many services will not function without an adequate data plan, even via WiFi...but only your carrier can tell you exactly what services you can expect to work with your plan.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • SB0100 Live 5.1 XPSP3 not working, works fine under Linux

    I'm at my wit's end.
    Sondblaster Li've 5. SB000 installed under WinXp SP3. Device Manager sees it, insists that there are no better drivers than what it already has installed, and that "the device is working properly". Yesterday I could at least select the card under Sound andAudio Devices control panel, now it doesn't show there at all. I have uninstalled/reinstalled, enabled/disabled, Device Manager thinks all is well but nobody else seems to think I have a sound card installed.
    Linux likes it (Ubuntu Hardy Heron) no problem.
    I just inherited this PC and have no original driver disc but the Auto Update on the Creative site sees it but every time I try to get it to search for and install new drivers (I have tried 50 times at least) I get a message saying "server busy"
    The Li've driver packages that I have downloaded and run all seem to work fine but when I restart the same problem-- no sound card apparently present, and when I run the driver package again this itme it says there is no card present..until I repeat the process..over..and over..and over...
    I find it hard ot believe that Creative has had problems like this under XP for years with no fix. The steps in the FAQ haven't worked. I'm not the onlyone as evidenced by a Google query.
    Does anyone have any advice?
    Thanks!
    Matt

    Thanks, Katman, but no cigar.
    When I started all this at least I could see "Avance AC97" and "Creative SB series Li've" as selections in the Sound and Audio Devices properties, now it's just the modem #0 Line Playback.
    Went into safe mode and uninstalled...then reinstalled...and again...disabled/reenabled built in audio in the BIOS...enabled/disabled in Device Manager... updated the BIOS...updated the Avance drivers...nothing-- and it all works fine in Linux so I'm confident it's a M$ thing.
    Any other ideas? I'm grateful for your help, but I am stumped.
    Cheers,
    Matt

  • Webcam Live! Capture Video Not Working

    I have Creative Webcam Live! Previously, I was able to use the capture function to take small video clips.
    I am no longer able to do so. When I attempt to Capture a video, the screen freezes but the time does start to count up as if a video is taking. When I stop the capture, a video clip box appears on the right hand side, but it's blank. When I attempt to play the blank box, the little indicator that scrolls across the bottom of a video when it plays moves about an inch and keeps looping. Please help. I've uninstalled and reinstalled the software. Still doesn't work. Thank you.

    Hi,
    I'd suggest the following. First thing to do is to see if there is a live video being displayed in the webcam app. Assuming that there is then it would look like the camera is installed correctly.
    There may be another capture device interfering with caputre so what would be a good idea would be to clear out the C windows twain and windows twain 32 folder. Backup the contents first then delete. You'll have to reload the camera software afterwards
    Hope this helps
    john

  • MSI Live Update 3.69 Not Working!!!!

    I've recently upgraded to Live Update 3.69 as the previous version told me to but this new version hangs indefinitely on the Search Mainboard BIOS Version stage. If I uncheck Mainboard BIOS it hangs on the next one down. If I go back to 3.68 it works perfectly   
    Anyone else experience this problem?? Any solutions? 

    I left it on overnight still hanging at the same stage 
    I use liveupdate because the MSI site is hard to find things on especially the graphics driver for this old graphics card 
    What I really want to know is why the previous version worked but the new version doesn't

  • Windows Live Movie Maker will not work

    After downloadng Windows Essentials and the WMM I received this error message
    Windows cannot  access the specified device path or file.
    You may not have the approprate permissons to access
    the item 
    Tried downloading again as administrator with no success.   

    Hi,
    I agree with
    arnavsharma to run the WMM as administrator to see the results.
    Also, I suggest you use Process monitor to capture the events when you repro this issue.
    Process Monitor v3.05
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    If you find any file or registry key with access denied error, try following guide to fix it:
    Solving Access Denied Errors Using Process Monitor
    http://improve.dk/solving-access-denied-errors-using-process-monitor/
    You can also upload the saved process file into file service like Onedrive and share the link here for our research.
    Kate Li
    TechNet Community Support

  • Sound Blaster Live 5.1 , Sound Not WOrking in Windows A

    Hi,
    I am having a problem with my Sound Blaster Li've 5. , I get sound in applications like Media player or games but in windows xp itself I get nothing. I go to the sounds tab in the the control panel and its like it does not see the sound card, the little play button next to each windows sound is not lit. I have ininstalled the card, taken it out rebooted:angry: and reinstalled with no success..any sugestions?
    thanks in advance

    i guess you're using WindowsXP, huh? well, im using Win2000P. once my Life! wasnt properly recognized by windows too, so i checked for any old soundriver files. then i installed the card manually with the hardware assistant.
    after that i could install the livedriverunipack from creative, and everything was fine. but of course windows should detect that card without that procedure! maybe you give it a try. (btw, dont play the with the IRQs)

Maybe you are looking for