SB Live CT4830 + Win XP (with all

Hello,
i researched for lots of solutions, but nothing worked.
i have CT4830 sb li've.
in Win ME, everything is OK, but in the WinXP , sbli've doesnt work.
i can see it in the device manager (like SB li've WDM ) , but when i try to play mp3 for example, media player freezes. and things like that.
i downloaded all drivers i can find, lots of, but they have same warnings,,
" sound Blaster card not detected on your system...."
i try all PCI slots. nothing changed.
what can i do? i dont want to buy a newer sound blaster. because, sb li've ct4830 is good and enough for me (but in win ME) i want to use it with winXP.
please suggest me, what can i do? bios setup? pci latencies? another drivers? what ?
i wrote an e-mail to Creative support, they answer me " you can contact with your OEM seller"..
but what an answer, who is the manufacturer ? creative or oem?
my system is: P3 800Mhz 384Megs Ram, Asus cuv4x mainboard via chipset...

Catherina-CL wrote:
The CT4830 card is an OEM card, usually supplied in systems made by, for instance, Dell. OEM cards can differ from the retail cards, and are supported directly by the supplier.
You could try moving the card to another PCI slot before you try to install the drivers again, and make sure all programs running in the background are closed (to avoid a conflict). Try the Li'veDrvUniPack install then (Li'veDrvUni-Pack(ENG).exe).
Cat
If you can't get those drivers installed, - your car is not a ct4830 but ct483 or ct4832. You need then patch the installation package using ctcomp.
--> extract the Li'veDrvUniPack into your HD (with winrar or equal software)
--> download the ctcomp.exe
--> run ctcomp and point it to look the file to patch (data.cab) from \Audio\Setup -folder (a sub folder in folder, you extracted the installation package).
--> install drivers
<i>
NOTE: These card models are supported after patching with CTComp 7.6.0.
Audigy 2 ZS Series : SB0360/SB0290, SB0350/SB0250 , SB0352
Audigy 2 (NON-ZS) Series : SB0240/SB0250, SB0243, SB0242, B0244/SB0250/SB0280/SB0290, SB0245, SB0244, SB0320/SB0290, SB0249
Audigy 2 LS : SB34
Audigy : CT4820, CT0070, CT0072, SB0090, SB062, SB0092, SB06, SB092, SB09, SB009, SB0095, SB0230, SB023, SB0232, SB0238
SBLi've! 5. : For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222, SB0228, SB0226, SB0223, SB0229
SBLi've! : For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
SBPCI 52 : CT4790, CT4820, SB050
SBPCI 256 : CT4890, CT489, CT4893 </i>
jutapa

Similar Messages

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

TS4020 I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

I live in South Africa and I am looking to get a mac book air to help me with all of my schoolwork and presentations. Are there any discounts that students can get and if so how much of a discount?

I live in South Africa and I am looking to get a mac book air to help me with all of my schoolwork and presentations. Are there any discounts that students can get and if so how much of a discount?

Hi, actually there is, but you have to inquire according to Apple.com/za website. Here is the statement:
Student Discounts
Students, staff and academic institutions are eligible for ongoing discounts on Apple products and solutions. Call 011 535 9080 for further information.

Does Flash Media Live Encoder work with all the blackmagic-Design Decklink Studio?

Does Flash Media Live Encoder work with all the Blackmagic-Design Decklink Studio?

Well, I have my XH A1 Canon video camera hooked up to Shuttle Thundbolt as composite and the thunderbolt to my Macbook Pro (Late 2011 - 2.4GHz, i7, 16GB Ram) and FLM 3.2 does not see my camera.
When I hook my same camera up to my Windows i7, 2.8Ghz, 8GB Ram using my "Hauppauge capture card" as composite it can see my camera.
I'm going to try a simple VHS tape deck and see if my macbook pro can see it using the Shuttle Thunderbolt. I'm going to guess and say it won't.
I installed the drivers as well.
Evan

I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help

I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

How to populate a sharepoint 2010 list from the active directory. How to populate a sharepoint 2010 list with all sharepoint user profiles

How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
sz

While
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen!

Migration assistant (from WIN) problem with emails:

Hi there
I am a new user dealing with my first mackbook pro.
For first I have used the migration assistant to trasnfer data from my old win7 pc. For time reason, i have used it in two-three different times. Theproblem now is that when I've tried to transfer my email boxes, the software recognizes the user in win and wants to create an other user in mac.
This way, I have a second user with all theworking boxes.
Obviously, I would like to have only one user with all the boxes.
How can I do?
I even tried to transfer the boxes from one user to the other, using the "export" command in Mail.
My the way, when importing in the right user i get an error message:
"Impossible to import some messages" if i try to use the "Apple Mail" option
or
"mbox elements not found" if I use the mbox element options
thanks
p.s. sorry for my english, I'm italian!

Our local Time Machine Guru Pondini has set up a very informative website on this (and other things).
Have a read here http://web.me.com/pondini/Time_Machine/19.html
Stefan

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

AS3 - 1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place; 2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true - ActionScript 3 - flash cs3 cs4

Hi folks,
Ronny's here again on forums, having particularly 2 (two) questions/problems to resolve:
1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place
2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true
attached is the .zip file (as3_Countdown Timer_ver 1.0.1_by Ronny Depp.zip) with all flash source files containing:
a) The FLash Source (file: timer_module.fla) - (FLA flash source file - Flash CS3 Professional, Flash Player 9, actionscript 3.0)
b) com.othenticmedia.utils.dateAndTimeManagement package including 2 .as actionscript 3.0 Class files.
       i) com.othenticmedia.utils.dateAndTimeManagement.DateAndTimeManager Class in the said package. (file: DateAndTimeManager.as)
       ii) com.othenticmedia.utils.dateAndTimeManagement.CountdownTimer Class in the package. (file: CountdownTimer.as)
c) The compiled SWF file version of this Application's blueprint. (file: timer_module.swf).
What i need to confirm is: ........................................................ see the next post of mine. (for Problems need to be Resolved)

Problems to Resolve:
Problem#1) - Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place.
Problem#2) - Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true;
Problem#1 Description:
I need to pinpoint the Logical TimeSync Exception, i am still unable to figure out. That is I'm using a webservice in my Application to Synchronize the Time with the actual ET (eastern time) with accomodation of auto-adjustment for EDT GMT-4 (eastern daylight time) & EST GMT-5 (eastern standard time), times. I am using the zipcode: "10012" to pass it to the Web Service in urlRequest object, to retrieve the Current ET eastern time according to EDT & EST time settings for Manhattan/Brooklyn areas or others within New York, NY 10012.
Currently the Web Service is returning accurate date/time based on local EDT GMT-4 daylight time.
Is there some defined set of dates for EDT & EST times for New York region that I can check for to ensure the correct Dates/Times for Eastern Time in New York area ??? I am using NY zipcodes because i am sure to get correct ET values.
The Major Problem Part: is I need to correct the time by 2 seconds or approx. 2 secs, some millisecs.
When I retrieve the Time Value from WebService, it lags behind for 2 seconds as compared to DateObj i create using computer's local time, on my Windows XP Service Pack 2 with Automatic Updates turned-on. And I'm sure about my Windows will be having latest updates for Time Management already installed. I also added the 2 secs. to the TimeSync(ed) Date to make correction to this Date obj.
I call my custom fucntion addSeconds(dateObj:Date, secs:int) to add 2 seconds to the Date by Converting Seconds to Milliseconds.
Please comb through the as code in files attached and Help Me Out !!!
Problem#2 Description:
Secondly I need to Detect the End of Stream state while using FLVPlayback component, an rtmp:// live Stream from FLASH MEDIA SERVER.
I need to Play a YuMe Post-Roll Ad when Steam Finishes/Ends.
Live Broadcast Stream Event starts every night on Wednesdays & Saturdays exactly at 10:59 PM EDT GMT-4.
Live Events only Streams/Broadcasts the stream for 50secs. exactly. When [playback stopped] it plays a PostRoll Ad and after the CountdownTimer again comes back to life. The Next upcoming Event is calculated & the Countdown begins until Next Event's time/date is reached.
Here is the code on the frame 1 on the MainTimeline: (rest of the params like source, volume, skinAutoHide are Set using Property Inspector for FLVPlayback instance on Stage)
//myStream instance of FLVPlayback is on the Stage
myStream.isLive = true;// Frame 1 Actions in the FLA
myStream.addEventListener(VideoEvent.COMPLETE, onEndOfStream);
myStream.addEventListener(VideoEvent.STATE_CHANGE, onState);
myStream.addEventListener(String(VideoError.NO_CONNECTION), onStreamError);
myStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
/*if(myStream.stopped){
     trace("tracy: "+myStream.state);
} else if(myStream.state == VideoState.STOPPED){
     trace("tracy: "+myStream.state);
function onStreamError(event:VideoError) {
     trace(event.code + "\n\t" + event);
function onState(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function onEndOfStream(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function netStatusHandler(event:NetStatusEvent):void {
     switch (event.info.code) {
          case "NetConnection.Connect.Success":
               //connectStream();
               break;
          case "NetStream.Play.StreamNotFound":
               trace("Stream not found: "/* + myStream.source*/);
               break;

Full screen games crash at launch on Bootcamp Win XP with Apple Cinema Disp

Hello,
strange issue to me. Everything goes flawlessly on Win XP on Bootcamp on my 2010 MBP 13", and games launch full screen with no problem. But as soon as I use my external 20" Apple Cinema Display, they crash immediately after launch. I wouldn't know on Windows how to get console logs etcetera.
This is an issue with all games launched at full screen. No issue in applications.
How to fix this?

Anyone, please.
This now only happens with Unreal Engine games since I chose "use this screen only" on my Nvidia preferences. I think it has to do with the Win XP drivers for this Nvidia integrated chip (Geforce 320M), which aren't much updated in Win XP. I think I could fix it by updating to Windows 7 and using newer drivers which aren't available in XP. Hope so.

Transporting Info areas and info cubes with all the contents

Hello Guru's,
I want to transport Info areas and info cubes with all the contents from 1 system to another. How can this be achieved.
Background... these belong to the system ($tmp), i already tried assigning them to a package and transported to the system, but only definitions have been copied over, there is no master data for any characteristics (i.e every characteristic is empty), there are no Hierarchies for any characteristics, there is no transaction data ===> effectively only the definitions is copied, but everything is emtpy.
Regards, Jatin

No way to transport contents along with structure from on system to another.
Different system contains different data
DEV system has only rough data. So developed objects will be tested with rough data for consistancy of objets.
Quality system has some amount of original data. After transporting the delveloped objects from DEV to Quality we need to test the oblects with some original data in Quality.
Production or Live system has only live data. Afer testing complted in DEV and Quality ( with rough and Some amount of original data ) if the objects are giving desired values as per the requrements we need to transport them to Production system.
considering the above criteria no use of transporting data from one sysstem to another.

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to your site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroo

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to the Adobe site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroom CC.

Yes, it looks like they've screwed up. Some people have been able to update CC to LR6, some people get half way through the download and it fails, some people (me included don't get any option to upgrade to LR6 in the CC app... It's all very annoying. I tried the help chat, and I got "log out of the CC and try again in 2-3 hours". Well, that was half an hour ago, but I'm not holding my breath for getting LR6 today.

Firefox 16.02 on Win 7: with the latest update to Firefox I am encountering the same question that others have had, about why I cannot connect to https location

Firefox 16.02 on Win 7 Home Premium. 8 GB Ram, 500 GB HD. Reference to Trust Manager appears instead of the site I have entered, and I cannot locate the Trust Manager in either the Firefox (which gives me some inane referrals) nor in Windows. What do I do now?

Hi,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
If the problem persists please also check in Windows [http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode Safe Mode with Networking].
[http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode Safe Mode]

SB Live CT4830 + Win XP (with all

Similar Messages

Maybe you are looking for