SB Live x PC case Frontal Pa

How do I do to get front panel sound for PC case?I have a SB Li've!. Connectors from front panel:?Orange - MIC Power (L)?Blue - Line out RR
Red - Line out FR?Black - GNDGreen - MIC IN (R)?Yellow - Line out RLWhite - Line out FL?I'm sorry by my poor english... Thanks!?RAMON ROCHAfrom Brazil

Alucart,
Unfortunately all of our current products have discontinued Dos Driver support. PCI support under Dos has always been emulated and as things progressed it became more difficult to maintain it. You may want to stick with you current card for Dos and shop another card for you more progressi've uses.
Jeremy

Similar Messages

Where does the agent live on the CAS/CAM?

My host is prompting me that agent update 4.8.2.3 is available. I do not see this as an option for download via CCO. what is the dir on the server where the MSI lives ?

Great news! The location is /perfigo/control/data/upload on the Mgmt server.

Account determination for entry CASI DIF not possible.

Hi Friends,
While doing Invoice (MIRO) against PO, I have encountered below error.
IR Error:
Account determination for entry CASI DIF not possible.
Please help to how to resolve.
Warm regds,
Raman,

Hi,
If you click on the message you will get help, it will show you exactly which entry in the auto account assignment table is missing. Note the details (COA valuation area etc.) then at the bottom of the message is a link to take you into the transaction where you can make the appropriate settings (assuming that you have access and this is not your production live system).
CASI may well be yyour chart of accounts and DIF is the transaction event key. The system needs to know which GL to post to in this situation.
Steve B

How can I copy media from an HFS case-sensitive drive to an HFS case-insensitive drive without getting an error?

About a year ago, I accidentally created a partition on my drive for my iTunes Music. On that parition, called MUSIC, I selected the filesystem to be an HFS, Journaled, case-sensitive partition. Since then, all of my music, new and old, lives on the case-sensitive MUSIC parition.
My other partition, called BOX, is an HFS, Journaled, case-insensitive filesystem, as are my external drives I use for archiving and backing up my music.
My dilemma: when I try to copy my music/iTunes media from the MUSIC partition to a different partition that's case-insensitive, I obviously run into errors saying that certain files can't be copied because they will overwrite others. Subsequently, I can't back up my music and iTunes media to another drive unless it has the same filesystem parameters favoring case-sensitivity. I want to move my media to a case-insenstive drive/partition.
As the story goes, I'd like to avoid having to reformat and worry about moving my media around because I feel, in the end, I'd end up doing more harm then good in my pursuit to fix this issue.
My question: is there some way I can detect which files are conflicting with each other, and then manually rename them? My music library runs about 16,000 songs deep, but I'd still feel saved even if I had to go through and manually rename all of the music files so they don't conflict with each other in order to get them on to a case-insensitive drive. Perhaps there's an AppleScript someone knows about that I could execute in my MUSIC partition to see which files/directories are causing my problems? In other words, I'm thinking there could be a way to detect the same file/directory names that are only different soley because of their case.
Any help, suggestions, or solutions are welcome. Thank you all for your time in helping me solve this!
And have a Happy Thanksgiving

How do I restore a case-sensitive,...: Apple Support Communities

How to force authenication to stream live content FMS Interactive Server on Linux

We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server.
Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting.
I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content.
Has anyone configured this in Linux because the documentation is mainly for Windows.
Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.

The FMS server does not the livepkgr application as its default. There is no default application as such.
FMS server installer comes with few applications to make it easier to get started, the four applications live, vod , multicast and livepkgr , each one of these applications trying to give an easy way of implementing the different scenarios.
live and vod are the basic RTMP live and vod cases, while multicast gives a sample implementation for RTMFP and P2P cases, livepkgr is the sample for HDS / HLS cases using HTTP Dynamic Streaming and HTTP Live Streaming for iOS devices. None of these are default, and all of them can be made use of , depending on your scenario.
Each of these applications have the necessary files within its folder, a main.asc file that has the server side script which can include some business logic or authentication stuff (its not mandatory to have any of these files, that means, a blank folder would still /can still act as an application ! ). So, main.asc is specific to an application and it can contain the script to guide the behavior. None of these asc files are loaded by default, they are dependent on the application,
The application can be loaded on server start up or upon the first connection to it. So unless there is a specific activity to load it up, none of the applications (and their corresponding script files) are loaded on the server engine.
The applications, their script and other files are not specific to the interactive server, they are present and the functionality is same on all flavors of FMS and on both windows and linux.
main.far file is just the signed archive of main.asc to avoid any changes to be made to it (the licensing process on the streaming server to restrict unsigned applications to be loaded is the reason to make this change), and hence if you make changes to the main.far , the application will not work. But this does not mean that you cannot make any changes. You can simply delete the far file and copy the main.asc (and edit it ,if needed) from the samples folder to make the applications work. You can also make copies of the applications.
The documentation does not cover linux because there is no difference at all from windows, and what's true for windows should be the same for linux as well , in terms of its functionality.
By default, FMS comes with only one virtual host : _default_VHost. I am not sure where you seeing the three virtual hosts.
What query string you want to make work on Linux ? Can you please clairfy.
I hope the information above clarifies some of your queries. Thank you !

Computer Case Audio Pan

Hey people. I've got two questions?to ask, slightly off from each other but anyway... Firstly the reason I started this post. I was wondering how I can connect my soundcard (SoundBlaster X-Fi Fatality)?to the case audio jacks (headphone and microphone jacks). The reason I ask is because I want to be able to plug my monitor speakers into the back of my computer and my headphones into the case frontal panel (NOT the X-Fi console). Where would I connect the jumpers onto the soundcard if this is possible? Otherwise (and this is my second question) am I able to use the X-Fi jacks for my headphones and the AC'97 onboard sound for my monitor speakers? I remember reading in the past that there can be conflicts from having two different sound devices so I disabled my AC'97 so that I can use the SoundBlaster effecti'vely. Thanks

it is posable to use the case conectores. but not directly. it requires aditional parts.
some were around here i've got a mag that teles ya what parts and were to get them at.
and radioshack does not carry the primary parts so dont bother gooing thir. ill se if i can locate the mag. cause im wantting to use my case front conectors to.
ok i found the mag. this may get expenci've cause u will want to get more than of each part in case u make a mistake.
im not posting the required info here. if u wish to give this a try please email me and i will provide the details then.Message Edited by clamo on 2-0-20060:22 AM

Dolby Digital Live

Currently there are very few solutions for those of us that want true digital surround audio in our games. It's sad to say but the best in gaming audio usually comes from console systems because they are typically hooked up to home entertainment systems with spdif digital outs. So just like when you listen to a movie in Dolby Digital 5.1, you get great sound.
Now in the PC world, most games either don't support Dolby, or use some other forms of analog surround.
Dolby came up with a solution, which more games are starting to support. They call it Dolby Digital Live, it's basically a way for computer gamers to get true digital surround audio via a spdif output. The catch is, you have to have a sound card or motherboard which includes Dolby Digital Live.
From the research I've done, it seems the Mac Pros include what Intel calls their High Definition Audio solution, which on most chipsets is also known to include Dolby Digital Live, in this case the ACL880 chipset provided by Realtek should contain DDL.
My question is for those with their Mac Pros, spdif speakers, and XP installed. As mine is still on order, I'd like to find out if this is working. You would need to have a set of 5.1 speakers attached via the optical out of the Pro, and using the correct Realtek drivers under XP, run a game tagged with the Dolby Digital logo, such as Ghost Recon: Advanced Warfighter.
So basically if it works, you should be getting 5.1 surround and some really nice audio.
Power Mac G5, Duel 2.3 4GB, 7800 GT Mac OS X (10.4.7)

Hello Zacabeb,
I understand you are wondering if you can use the Dolby Digital Live on your HP Pavilion 500-205eo Desktop PC. According to the HP Pavilion 500-205eo Desktop PC Product Specifications your audio is the Integrated IDT 92HD73E Audio. I am providing you with the 92HD73E Datasheet, which on page 2 lists Dolby Digital Live™ (DDL) as supported. This being said to enable the Dolby Digital Live in Windows 8.1 I would advise you to ensure you that have downloaded and installed the IDT High Definition Audio Driver.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Archlinux Live Image Kernel to old

I have a lot of installations in the last time where i have to use Archboot instead of the official Live ISO, in case of the kernel being just to old and so the installation does not work for example in case of missing network card drivers.
Are there any informations about why there is such an old kernel in the image and why there is no new image since the last may. The Image is nearly a year old.

I second that.
I recalled that there were some "rolling release" installation images but I couldn't find them again some time ago. I'm glad that this thread came up.
So please provide a link (and an explanation) to the images. It's now almost a year since the last update of the official images. This probably causes some confusion.

Runtime Repository on local database server only

This is a why question, as I have read the installation and configuration guides and don't see this answer. Please forgive me if I've overlooked it.
I am installing OWB in a client/server fashion; the database server resides on a UNIX platform, the client on Windows. I ran the OWB Repository Assistant from my windows desktop, and the repository owner and its objects were created. However, I see in the manual that the OWB Runtime Assistant must run on the same machine where the database resides. I did so, started up the Runtime Assistant on UNIX and created the Runtime Repository into a new user schema, and then a Runtime Access user. All went well.
It looks to me as if both of these wizards create database objects. Why can the Repository Assistant be executed from the desktop environment, but the Runtime Assistant needs to be executed where the database lives, in my case, UNIX. It seems that only database objects are created, it shouldn't matter where the wizard is run from, as long as a database connection can be made.
I feel like I'm missing a piece of the puzzle, can anyone enlighten me. Perhaps a daemon or service is started that I need to know about?

Perhaps a daemon or service is started that I need to know about?That's it! There are some java-services running outside the database. That's e.g. the reason why you can't deploy to an OS/390 system, because these services are not migrated for this JVM yet.
Bye
Detlef
Message was edited by:
289512

MSI Neo4 Platinum with MSI GF6600GT PCI-e Freezes on games

I'm having this serious problem that my new build system freezes on games. Sometimes I can play for a few hours and sometimes I can play only a few minutes before the system freezes completely. Only a hardware reset helps in this case.
This is my hardware setup:
MSI Neo4 Platinum
MSI GF6600GT PCI-e
2 x 512MB DDR400 memory(in dual mode)
AMD 3200+ 64-bit processor
Sound Blaster Audigy
DVD Writer
Floppy
I'm using Windows XP SP2
What I tryd:
Tested with other RAM modules, same trouble
Reinstalled windows xp, same trouble
Tryd all kind of driver versions, same trouble
Flashed bios to 1.9, same trouble
Put a Zalman Cooler on the Video card (temperature now between 40 and 60 degrees in games instead of 80-100 degrees), same trouble
This is where my questions come:
There are two hardware components I cannot switch to try:
The mainboard and the Video card. Whitch one is most likely to be broken??
I have read in the manual of the mainboard that the PSU should have at least 18A on the 12+ signal. My PSU only haves 15A there. While I doubt this results in problems like this I still like to know if it does!
Please help me out on this one!

Have tried older drivers for you GFX, I find the late 6XXX work better for most games. You mite want to check the system is stable with:
Prime95, Memtest86, 3D mark 03 & 05.
You mite be having the same problems as "easlern", his games would lock up. This was due to to a problem with onboard sound Sound Blaster.
https://forum-en.msi.com/index.php?topic=84328.0
https://forum-en.msi.com/index.php?topic=84328.msg603340#msg603340
Quote
At that moment I didn't even know what was actually on my board, but I knew it was a generic card I was probably never going to use anyway, and I didn't recall getting any sound card updates for this board. So I looked in device manager, and bingo: AC97 device under multimedia devices. I immediately did two things to completely eliminate the rascal: updated the driver for it and promptly went to BIOS and disabled the sucker. Also disabled SATA group 2 (slots 3 and 4), the Marvell LAN because I only use one ethernet anyway (the nVidia one, which from what I was reading, was probably the more robust of the two), both RAID controllers (actually I had disabled them earlier to skip the annoying RAID setup screen), and put the PCIe bus back to 100MHz (rogue: I was wondering about possible damage over time with this too high too, so I was glad to try setting it back to normal!) Also ran Driver Cleaner to rip out the detonators even though I was putting in another nVidia, and then put in the 6800GT and installed drivers. (In case you were interested, my 3dMark05 score went from 3511 under the 6600GT to 4939 under the 6800GT! I now run in 1280x1024 at max effects and I'm completely spoiled in one night already! )
Anyway, one of these myriad, desperate attempts must have worked because I get neither audio stutters (should have been a freaking clue in the first place, duh!) nor lock ups.
Since this is the first PC I've built, I was certain I had to have screwed something up hardware-wise or found some combination that had incompatibilities. If it WAS just the freaking sound card driver I'm going to leave this place in shame and never post again! In my defense, the MSI Update utility didn't show any updated sound drivers for me, and I had assumed it was being pre-empted by my SB Live in any case.
I was convinced this problem was (if it is indeed gone) a video card issue but I can't say it ever was without putting the 6600 back in and running for several hours. I'm going to bet it was the AC97 though because nVidia boards have always been fantastic for me, I haven't had any actual motherboard issues, my RAM and CPU are just fine, and Win2k has never let me down.
Don't assume anything, though, I've learned.
One thing to note: when I was checking out the AC97, I noticed it was *sharing* IRQ 20 with the nForce NIC detector (might have a different name, I can't remember right now). Apparently this is a capability of Win2k to share IRQs but it kind of added to my suspicions anyway.
I'll let you know how the next few sessions go and whether this issue is still an issue

How can I get my SVG to show up in the browser? Using Adobe Muse.

I created an SVG in Adobe Illustrator CC with all the recommended settings (yes, I unchecked "Responsive"), and then placed it in my website in Muse CC, and it does not appear on my website. It just shows a broken photo link icon where the image is supposed to be. I thought that at the very least, it would show the PNG image since it is supposed to automatically create the PNG.
It appears perfectly in Muse's Preview mode.
Any advice? Attached are images of the SVG settings I use, and how it is appearing in the browser.
Here's a link to the live site in case you want to take a look: design.mattgrajcar.com (I may have reverted back to just putting a PNG in for the time being).
Thanks!

This may be caused by your hosting provider not having the proper MIME file to display .svg files.
See link.
http://css-tricks.com/snippets/htaccess/serve-svg-correct-content-type/

Group Different Albums by the Same Artist under one Album Cover

I've read many posts regarding grouping tracks by different artists into one album, but none dealing with grouping tracks by one artist together from different album titles. An example of this would be classical pieces that are divided into different acts, or more recently, the new Green Day album "21st Century Breakdown," which also divides the album into "acts." Another example of this situation could be a box set by a particular artist, for instance an Eagles box set that contains 3 discs of differing titles (disc one: Eagles, disc two: Desperado, disc three: Live) in which case the three CDs are all essentially part of the same album.
I know the grouping field can be utilized to tag all the CDs within the same set to keep them together; however, I have not been able to use this feature to group albums such as those mentioned above together under one album art in the grid or in the coverflow view. It looks rather silly when there are 3 or 4 of the same album cover in a row in the grid or the coverflow.
The best way I could think to differentiate the different acts on an album or CDs in a set was to group the songs in their own folder and change the title of the album tag to reflect which act (or CD) those particular tracks covered. While this works in the list view to keep the tracks in order, it does not allow me to view the album as a “whole” using the coverflow view. It seems the only way to merge differently tagged tracks is if the ALBUM title is the same even if there are multiple artists. I’ve tried using the grouping, sorting, and “part of a compilation” options with no success. Is there any way to merge these tracks under one album art while retaining the different album names?

Adding slightly to the previous post I would suggest that you give each disc of the set an appropriate disc no., e.g. Discs 1 of 3, 2 of 3 and 3 of 3 for Eagles, Desperado & Live respectively in your Eagles Box Set. Record the individual disc titles in the Comments or Grouping field, then change the Album title for all three discs to something appropriate like "Eagles Box Set". The three discs will collapse into one cover and play in sequence. If marking the transition from one disc to another matters you could, for example, simply add the album name in brackets to the first track of each album. You could use curly brackets to distinguish this from other types of track comment. For more organizational tips see my previous post on Grouping Tracks Into Albums, in particular the topic One cover for multi-disc album.
The alternative approach for box sets which simply repackage a number of original albums together is to find the original artwork for each album.
tt2

Cut-out shape from jpeg in Illustrator CS2

Hi,
I would like to "cut out" a dollar sign ($) shape from a jpeg image so that I can "see through" the dollar sign to what is behind it. I have attempted to do this several times using the Compound path tool, Divide objects below, and everything else I can think of. Nothing works. First, I flatten the jpeg image. Then I create outlines of the dollar sign. When I select the dollar sign and the jpeg and click on "Make Compound Path" I get the error message: "Can't make a compound path. A compound path cannot combine a clipping mask with an ordinary path." I do not have any problems cutting through a vector image. For some reason this jpeg is giving me problems. Can you help?
Thanks

You want to set it up the same way and make an inverted opacity mask.
select the $ and the jpeg with the $ on top can be live text in case you need to change to pounds or euro.
then in the transparency panel select from the flyout Make Opacity Masks then in the transparency panels setting uncheck clip if selected and check invert.
You should get this

Discusted @ Genius Bars aptitude after iphone got so hot it burned the desk

I have just got back from my nearest Apple store (which is a 120 mile round trip) to get my iphone replaced after it overheated twice whilst charging to the point that on the second occasion (last night) it damaged the desk it was on.
After the first time it happend ast week I did some searching around and it appeared to be a common problem. I noticed a few places mentioning the water sensor in it and to check this before taking it in for warrenty work, I checked mine yesterday and it was white.
Anyhow earlier today I put it on charge again and within 20 mins it was so hot it damaged the table top, I had to hold it i a cloth to unplug it and move it.
Anyhow, So I decided to take it the 60 mile drive to the store as I could not be without it for the 2 days quoted if it was collected from home, When I get there an appoitment was made for an hours time to see a so called genius.
This guy instantly said it's been in water, I explained that it hadn't and the sensor was white yesterday and the only thing that had happened between now and then was that it had got so hot it had burned a table, he refuse to do anything else with it but record the serial number in his system.
On asking if there was any way the senso could change colour without getting wet, he said no errr I don't think so. I asked about te over heating could that damage the sensor ? err don't think so.. Then th clasic question from him, "maybe you've been out in the rain, that can set them off" The phone lives in a case that covers everything but the dock and screen so no "rain" could have got in, even if I had been stupid enough to use it in the rain (which I am not)
So I am left at this point with an Iphone that could possibly cause a fire, that Apple refuse to fix because they "errm don't know if excessive heat can fail a water sensor"
His parting comments were " you could claim off your insuance" Thanks a lot Genius

Thanks everyone for you replies,
The phone is charged on the AC charger, but we have 2 Iphones and an Ipod Touch in the house and the others are fine, this happend on 2 different chargers so is not an AC charger fault.
I have written to the manager and included the photo, so I am waiting to hear back, I also had an email from Apple asking me to fill out a survey on what I thought of my recent visit to the Genius Bar
I have filled that in as well, as I was not happy with the service it gave an option to be contacted by phone to discuss my issues further, so agreed to that. Who knows what will happen now, best case the phone will be replaced before it catches fire

How to enhance flds in production system

Hi...
In the prod system, the deltas r running..now i need to enhance a fld..wht steps do u follow.?
Thanks&Regards

Hi Sarasu,
Follow the steps, to Enhance in development system ,
In SAP R3,
Enhance the extract structure with the required field and active the datasource,
Enhance the include program with the code by selecting the appropriate Function exit , (CMOD)
IN SAP BW
Replicate the datasource and do the appropriate mapping
Enhance the datatarget with the respective infoobject.
In Production:
When the changes are moved to the production, your next delta run wll automatically fetches the data for the new field from the date of go live.
In case if you need the historical information for the new field , then you do re init,
Hope this will be usefull,
Thanks
Sathya

SB Live x PC case Frontal Pa

Similar Messages

Maybe you are looking for